Other forming machines

120 companies | 474 products
Filters
  • What’s new?
    Submit

The Emmegi Mod-End Rifila assembly bench is a semiautomatic-cycle trimming machine that...

The single-head trimming machine with rising blade has been designed specifically for use with flat sheets of aluminum and...

{{productDetail[26504]}}

Hydraulic press lines are mainly used to manufacture a wide variety of parts in small to medium lot sizes. Depending on the required forming operations, the line typically consists of four to six single presses. The production process is fully automated from the blank to the...

AG Schuler has worked in cooperation with Feintool, a Swiss company, for the development of this fineblanking press, for which the manufacturers have worked over 30 years....

{{productDetail[13229]}}

KraussMaffeis CFT series are suitable for use in tilting purposes. These mold carriers contain different quick closing movements and high platen parallelism. This equipment features an easy accessibility...

The SFT series is manufactured by KraussMaffei, and is a mold carrier that is ideal for use with different kinds of elements, and processes as it has peak holding forces and rapid traversing...

Electric mold carriers in KraussMaffeis e-drive series are designed using standardized modules. A fully electric drive concept was also used in the design of the instruments. This setup leads to low...

Krauss Maffeis WinCap Series of electric mold carriers are generally utilized for window encapsulation applications. Their clamping forces are pneumatically produced over entire mold fixing areas, while their...

{{productDetail[20426]}}

One block body in order to grant the mechanical features also in case of hard job conditions and fatigue.
Bending...

This three-phase machine is ideal for difficult job situations and fatigue, thanks to its one-block body and excellent mechanical characteristics. The bending...

Tecnor presents PF series bending machines. They have a single-block body to assure of mechanical features, including in challenging job environments and fatigue. They allow clockwise and anticlockwise...

The PF 40 TRI is ingeniously devised to provide exceptional performances, high productivity and ultimate user satisfaction. The single piece body facilitates ergonomically and mechanically balanced operations, thereby preventing...

TECMOR twisting equipment features disc rotation in a clock-wise or reverse clock manner. It offers yield as well as automated halt post twisting as...

{{productDetail[115915]}}

Wood forming technology (for plywood, MDF boards, floor panels, etc.) with the use of ZEMAT brand Radio Frequency (RF) Generators and custom designed Hydraulic Presses is the best and the most economical solution for manufacturers making short series of products and requiring energy efficient, fast and easy production process.
Thanks to the use of RF technology the cost of tooling...

{{productDetail[40251]}}

Dimeco Alipresse's 1735 series of knurl edge trimming shears are designed with two pairs...

{{productDetail[8585]}}

The ALS is a back taper rolling machine from Escofier. The unit has internal or external teeth reworking of manual gearbox sleeves or pinions, designed for industrial or light vehicles.

It...

This machine is appointed with a vertical work axis that caters to roll finish the gear profiles for either sintered part densification or regular steel. It is appointed with a cast iron base, which ensures excellent rigidity of the machine. Adding to this, the superior...

{{productDetail[8258]}}

• The cold-forming method requires an extremely
rigid and strong machine.
• The new Fimat...

{{productDetail[40959]}}

The tube-form ELE is a range of electric CNC machines. It is designed for combined tube-end operations on tubes with a maximum...

The AST30 is a CNC end-forming machine manufactured by BLM Group. The device is equipped with six working stations, one of which could be rotary applicable...

CNC tube end-former features a modifiable establishing, operating and rolling tasks for tube with a maximum O.D. of 100mm. The device is equipped with six functional and modifiable tools which can be adjusted as basic forming supplements...

The Tube-Form is a CNC tube end-forming equipment that comes with a rotary table. The model is also equipped...

{{productDetail[6136]}}

The Gyspot Combi 230 E Pro is a two-in-one dent pulling machine. It operates on both steel...

The Gyspot 2600 features a 2600 A maximum output current. It is designed for dent...

The Gyspot 3902 model is manufactured by GYS, and is a dent pulling machine that...

This 400 V steel dent puller featuring 3800A output current...

The GYSPOT PRO 230 model is a rounding machine developed by GYS. It is constructed...

{{productDetail[61397]}}

We have designed the T-series hydraulic presses with 3 different power ranges, from 150 to 300 tn

They are especially designed for the straightening of electro welded structures and flame cut sheets

Their design facilitates the loading and unloading of large volume structures. It allows the different pressing points to be accessed without the need to move the part thanks...

FDV-125 E motorized hydraulic press with double stanchions and fixed bed for vulcanizing

Structure and tables
It made with a rigid electro welded structure of fixed bed for greater strength and lower table with hydraulic extraction.
It has a thermal top table of 1.350 x 1.100 x 115 and cooled anti-plate, guided by four columns ø 60, and a thermal table below of...

{{productDetail[37839]}}

The VBU 400 is a trimming machine that is ideal for use in circular components that measure up to 400 mm in...

The VBU 800 is designed for circular pieces of up to 800 mm diameter. The unit is designed with a hydraulic...

The Trimming machine model VBU 1200 is suitable for circular pieces of up to 1200 mm in diameter. It...

The VBU 2200 is a beading machine manufactured by Lucas. The device is used for circular and polygonal pieces of up to 1,600-mm in diameter. It comes complete with a hydraulic unit for control...

Lucas’ VBH is a flanging and punching machine type engineered to meet the requirements of the users. The tool satisfies...

{{productDetail[38918]}}

The MB series is manufactured by Amob, and is an end forming equipment that covers a wide array of...

The MR3010 is a flanging instrument that has been specifically developed...

{{productDetail[61071]}}

Sertom has designed a full range of machines, composed of three utensils, for the production of various flanged bottoms -...

{{productDetail[28331]}}


IDA DOUBLE ENDSHAPER


Automatic...

{{productDetail[80983]}}

ER 25 Electrical upsetting
machine designed for engine
valves and trucks tyres valves.
In this machine the movements
of the hammer and of the...

The electro-upsetting machiie ER
125DC-SP is the result o( a long
experience In (he construction of
machines studied 'or the produc-
tion of studs,...

Upsetting pressing machine lor bar
e 12-40 mm. Continuous nominal
power KVA 120. Upsetting work on
cylindrical...

Horizontal electncal-upsetting
machine. Rated power kVA 300.
Max bar diameter...

Electrical upsetting machine with
automatic charge ot bars to be
upset. Nominal power KVA 300 x 2.
Min....

{{productDetail[16586]}}

Combi Monoblocco rollformers suitable for making seamed pipes in various sizes and shapes

Ideal systems for...

{{productDetail[33281]}}

Denn manufactures a wide variety of flow forming lathes that have the ability to operate starting from a blank or a pre-form getting from the initial thickness of the desired final...

{{productDetail[16518]}}

A wide range of side trimming equipment for all types of steel
The Fives side trimmers features a special design and blade positioning technology that offer clean accurate...

Fives produces a variety of Taylor-Wilson end finishing machines all over the...

{{productDetail[62063]}}

The VSP from Fravol is an edging machine for straight shapes, round or curved panels....

This edging machine is specifically made for straight, round, or even curved panels....

Fravol presents edging machine suited for round, straight or curved panels. The machine...

The A16 series is manufactured by Fravol, and is an edging equipment that is ideal...

Fravol's A16PUR Edging Machines for straight, round, or curved panels are generally used for applications...

{{productDetail[82287]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation