|
|
| Products 121 to 150 of 177 |
Round belt conveyor
Standard model: Drive: head/ centre/ direct drive
Conveyor belt: PU
Length of line: 600 to 3,000 mm
Load: max. 5 kg/m
|
|
Tenova TAKRAF developed and supplied Slope Conveyor Bridges as a mobile link between a Bucket Wheel/Chain Excavator and a shiftable conveyor installed on a bench with a higher level. The advantages of Slope Conveyor Bridges are on the one hand the location of the face conveyor already on the next higher level and on the other hand the elimination of a ramp conveyor. The slope will be bridged by the Conveyor Bridge without any earth work.
Tenova TAKRAF's Slope Conveyor Bridges in Kazakhstan have a capacity of 5500 m³/h and can handle height differences up to 28 m.
|
|
- Low profile design provides tight product transfers and the ability to fit into space-constrained areas
- Corrosion resistant construction is achieved by replacing steel components with stainless steel or electroless nickel plated components to help prevent or minimize rust. Anodized aluminum is used on some surfaces as well as on many of our side and guide rail profiles
- Uses Lube-for-Life Bearings with H1 food grade solid lubricant
- Single piece 10-gauge stainless steel framework is laser cut and formed to create a single-body frame construction, ensuring frame integrity
- Tight tolerance belting and our unique snap-out sealed tail assembly provide for a quick belt change (less than 5 minutes) that is normally achieved without having to remove the drive packages or side rails
- High tensile strength belts offer superior strength-to-weight ratio and are available in over 50 various types
- All components of our conveyors are produced on state-of-the-art manufacturing equipment
|
|
|
|
|
|
The inclined belt conveyor GKAL-60 can be used in wide variety of applications.
Upon request it can be made in various sizes within one single day.
The GKAL-60 has an extremely rigid TorsioDur frame in monobloc quality.
As well as in standard sizes it can also be custom made for specific problem solutions.
Along the whole length of the 60 mm high frame, additional accessories can be fixed to M8 sliding blocks gliding in the grooves along the side of the frame.
In a standard configuration the GKAL-60 is equipped with a slatted belt, side guide rails and a receiving hopper with fall black flap. The slats on the belt normally are 20, 30 or 40 mm high. But special heights are also available. The distance between the slats on the belt can be freely chosen. The receiving hopper exists in a small and a big standard version. A lot more of the versatile accessories in our program can be found on the pages 45 to 52 of this brochure.
The two double supports, with which the GKAL-60 on this page is equipped, can be infinitely adjusted in height and angle. For an easy change of position, the support at the receiving end has little casters. In an alternative configuration the GKAL-60 can have a single column support with wheels. It is shown on page 11.
|
|
Stainless Steel is often specified when sanitation requirements are a primary concern. The hard, flat and smooth surface of the belt is easy to clean with steam or chlorinated water. Corrosive cleaning solutions will not harm the belt material. In food applications, the belts provide a stable material that will not absorb natural odors or effect the tastes of materials being transported.
|
|
|
|
|
|
Stainless Steel Belt Food Conveyor
"Shin-Con-San"
Bears brilliant durability, corrosion resistance, and chemical resistance, due to its all-stainless steel body.
It is optimal for conveying items that require heating, drying, and cooling to extents impossible for resin or rubber belts!
Unlike rubber or resin belts, stainless steel prevents the infestation and reproduction of bacteria, making it optimal for loading food directly onto the belt!
- Despite being a stainless steel belt, its drive / tail roller diameter is a minimal size of 80mm, enabling smooth food transfers and compact layout.
- Stainless steel belts do not wither or deteriorate when cleaned or sterilized by hot water or alkaline chemicals.
- Since food colorings and smells can be washed away from stainless steel belts, products can be conveyed without concern.
- Belt edges do not fray and coatings do not peel. Our belt eliminates any fear of foreign particle insertion.
Applications:
Direct food loading conveyance, food filling, packaging line food sterilization, cleaning, dewatering / drying lines, freezing / cooling lines
|
|
|
|
|
|
Elegant solution with CleanTec: GEPPERT conveyors in stainless steel
GEPPERT-Band is one of the few manufacturers in Europe offering a complete range of stainless steel conveyors. But not only that: with CleanTec, the patented hygienic technology, all the strict requirements of chemical, pharmaceutical and food industry are met or exceeded.
These superb conveyors are available within 4 to 14 days, depending on the model.
In contrast to most other stainless steel conveyors - GEPPERT-conveyors are manufactured completely out of stainless steel - including shafts and bearings.
Do you have to transport very small objects or large amounts of bulk material or even bigger piece parts ? Do you need specially small transfer diameters or do you want to integrate conveyors into existing processes ? The GEPPERT range of stainless steel conveyors offers it all. Flat belt conveyors are available in belt widths between 50 mm and 1,000 mm and with lengths between 500 mm and 12,000 mm for loads of up to 100 kg. Kinked and Z-shaped conveyors with adjustable inclination between 40 and 60° can be made in useable widths between 130 mm and 530 mm and in a total length of up to 4,000 mm for loads of up to 30 kg.
|
|
|
Metal belts feature a high strength-to-weight ratio , which is an advantage in nearly every application where high strength, light weight, or both are required. Low mass offers high acceleration and rapid deceleration, with minimal motor sizes.
|
|
Features:
Metal belts are optimal for preventing static electricity and electrostatic charge. These electricity may affect quality of semiconductors and electronic parts. Therefore stainless steel belts are suitable for conveying these items. Additionally, unlike resin and films, they prevent the adherence of dust particles.
Applications:
- Conveying sealed semiconductor packages
- Assembly conveyance of electronic parts (function check, UV processing, trim and form)
- Conveying films
- Conveying chemicals (prevents dust adherence to chemicals caused by static electricity
|
|
The standard of the industry. These highly efficient heavy duty chip conveyors are engineered to elevate and transfer a broad range of tough materials.
Features and Benefits
- Steel belting is available in plain, perforated, or dimpled style in 2½, 4, 6, and 9 in. pitch
- Available in closed or open frame designs in a variety of elevating onfigurations
- Widths up to 8 ft and lengths to 600 ft are available
- Features precision die-formed hinge sections
- Heavy-duty side chain features replaceable bushings and flanged rollers
- All other components are engineered standard off the shelf for ease of maintenance
- Closed frame models come completely sealed and oil tight
|
|
|
Applied Recovery Systems can design a variety of steel belt conveyors and steel belt conveyor systems to meet the demands of your chip processing system. Whether your metal chip processing requires a simple take away system for briquettes, or a more complex system for conveying chips and cutting oils from machine tools, Applied Recovery Systems will meet your needs.
|
|
Caljan BeltTrack telescopic conveyor
Although we develop our machines with a view to efficiency, we NEVER compromise on safety. On average, every accident in the dock area costs 4.200, so investing in safe equipment is not only a question of looking after your staff, it is also economically sound.
Reaching up to 16.7 m, Caljan BeltTrack telescopic conveyors enable you to load/unload all European trucks and trailers. With more than 16,000 units in use, this is the world's most popular telescopic belt conveyor.
Caljan BeltTrack, type F, combines speed with ergonomic operation. The gently rounded profile and dual control panels allow two operators to work in unison to load the vehicle. The head of the conveyor can be placed at the appropriate height and extension by either operator. Capacity is increased, without causing stress.
|
|
For telescopic conveyance
BMT can be extended or contracted freely according to work requirements. This model can also be flexibly adapted to layout changes of mechanical equipment.
|
|
mk conveyor technology
A comprehensive, standardised range of belt conveyors, chain and table top chain conveyors as well as roller conveyors.
The configurability of the modules enables them to be adapted to customers' specific requirements and integrated in complex systems. At the same time, the basic principle of optimum standardisation ensures process security, fast availability and reasonable prices.
Drive belt conveyor:
- Conveyor lengths: 500 to 6000 mm
- Conveyor widths: 200 to 1000 mm
- Conveyor load max.: 100 kg
|
|
- Precision indexing tolerance to register a part to within ±.015" without sensors.
- High speeds up to 2000 fpm with ramp up/down capacity.
- Custom molded cleats to integrate perfectly with your part or application.
- Cleats are high frequency welded to the belt.
- Positive, non-slip timing pulleys.
- Self-aligning drive bearings with seals.
- Bearings can be lubricated rapidly, without drive removal.
- Stepper motors and Servo drives are PLC programmable.
- Optional self-tracking V-guide is thermally welded to the carcass of the belt.
- Nylon coated belt carcass to reduce friction and minimize noise.
- Ability to run multiple bands of belting on one conveyor.
- Timing belts are steel or Kevlar reinforced to offer high load carrying capacities, reduce stretch and allow for precision cleat or profile placement.
|
|
The Timing belt conveyor type 4210 is especially made for the transportation of parts, e.g. boxes, cardboards, crates etc.
Technical Data:
- Load Range: 0 N/m to 1000 N/m (0 kg/m to 100 kg/m)
- Speed (V): 0.05 m/s to 1 m/s (3 m/min to 60 m/min)
- Belt Centres: 300 mm to 1000 mm, in increments of 50 mm
- Conveyor Length: 1000 mm to 6000 mm in increments of 500 mm
- Timing Belt: 32 mm Wide / Pitch 10 mm
- Motor Drive: Center Drive up to 0.75 kW
3-phase, 400 V / 50 Hz or 460 V / 60 Hz ± 5%
|
|
Structure in carbon steel
Current-screen (carbon steel or stainless steel) forhigh temperatures
Sliding on rollers to load and return
|
|
| ... products without technical information |
| |
|
|
Belt conveyors
