|
|
Ensure the protection of your personnel and to perennialize your equipment.
Applications: Range of protection and accessories perfectly adapted to the Platforms.
+ PRODUCED: Reliability: material designed in accordance with the recommendations of the INRS, the security standard and factory inspectorate sets fire to.
Safety: protection of your equipment and your personnel, prevention of any fall of your products.
Railing: The railings are manufactured out of tube of section 35x35 Misters standardized Hauteur of 1100 mm, including/understanding smooth, under stringer and plinth.
Standard safety fence LOCKS: Only system recognized by the CRAM, the barrier lock is planned for the installation and in full safety deposits pallets by the lifting truck. Manufacture out of square and round tubes. Yellow completion epoxy painting.
|
|
Tack welded tubular structure. Platform covered with sheet metal with or without retention, with galvanized non-skid steel decking hot; Fixed or dismountable platform; Feet with paste of fixing on the ground. FRENCH MANUFACTURE
MANERGO proposes to you a whole range of platforms to your measurements, being able to answer all kinds of application. All our platforms answer the security standards in force.
|
|
PLATFORM ISOPLAN: THE PLATFORM WITH THE 3 PATENTS
CAPITALS
N°1 patent: Key point of the concept, the capital ensures the connection between the beams and the posts. The capital is resting against the post and is blocked by two keys. This process without welding makes it possible to transmit the efforts to more close to neutral fiber and on the angles of the posts. The definition of load is controlled perfectly thanks to the theoretical calculations confirmed by the tests.
AUTOCONNECTS
N°2 patent: Autoconnect allows the combination of 24 technical profiles high strength, the optimization of the combination by the data-processing calculation of each project gives the ideal solution (48 possibilities)
2 bolts ensure an exceptional reliability.
ANTIDEVERSEMENT
N°3 patent: Patented system of stabilization of the long beams carried up to 9 meters. Its need is determined by the software: safety and optimization are obtained by data processing.
|
|
Our rambardes is carried out in workshop in accordance with the standards in force in the field of the metal structure.
They are delivered by welded elements and comprise a handrail, 2 tubes of safety and a plinth of 150 Misters.
Fixing its fact is directly on the carrying structure or the floor.
This technique avoids any problem which can result from an assembly in KIT which is not inevitably carried out in the safety regulations.
The staircases are carried out at the request of 45° or 38° according to your use.
Welding joining of the silts.
|
|
|
|
|
|
The system of PROTECTION KEEGUARD assures the collective protection on the brink of madness tile roofs and roofs where risks for the people in height exist. Its main characteristic is a modular system where it is not necessary to penetrate nor to drill through the components of the tile roof, being avoided therefore the possibility of leaks in the building.
It is a simple modular design formed by counterbalances, that it causes that the system is sustained by itself, component minimums with integrated fixations, that do not require drills, anchorages nor special tools. There is no necessity to weld, to curve or to thread and can at any time be shortened or be extended in work.
Free of maintenance when being all the galvanized components and tornilleria protected with a resistant layer to the corrosion.
System KEEGUARD has been tried and approved by notified organisms certificando itself under the following norms:
IN ISO 14122: Security of the machines. Stairs, scales of steps and guardacuerpos.
IN 13374: Systems provisions of protection of edges
OSHA: Systems of management of the health and security in the work.
System KEEDOME is a collective protection to be used in roofs where there are skylights and skylights that have a dimension of 2m. at the most. It is a modular system advised for contractors and support systems when it is acceded to a roof to repair maintaining to the safe worker without risks of fall through the glazed areas.
Although this designed like permanent solution, this system can be disassembled, be transferred and be returned to mount without difficulty since he is very light when using elements of counterbalance in PVC.
|
|
The alloy of safety and the design
Standards NF 14122-3 and NFP 01.012
Square tube socket bolted on the floor
Smooth tubes aluminum and partly low galvanized plinth of it
Color with the choice
Flexible
Possibility of personalizing with the colors and logo of your company (If ERP)
|
|
APPLICATIONS
Railings for floors, levels, permanent access to machines and industrial plants.
ADVANTAGES
• Engineering studies.
• Modular units ready-to-install. Delivery in kit form.
• Ensure the continuity of railings between floor and System T stairs.
• Large span handrails allow perfect straight and save time.
|
|
Extruded aluminum railing
Leger, easy to handle, rapid to be posed, SECURILISSE® aluminum will save to you time.
Its design, the nature and the shape of the elements which constitute it in make a railing of quality. SECURILISSE® aluminum is esthetic, stable and of one surprising rigidity for an aluminum railing.
The SECURILISSE® aluminum is delivered in Kit. The under-smooth and the ovoid section are delivered in lengths of 3 or 6 meters.
The assembly is done on site, without welding with the visible parts of connection below. However, if you wish it we can cut up the amounts in our workshops and deliver them to you ready to pose.
|
|
|
|
|
|
Our SLIDING ANTI-FALL DEVICES on line of rigid anchorage, under the norm IN 353-1 for the individual protection against height falls, satisfy the dispositions corresponding to directive 89/686 the EEC.
Systems to facilitate the vertical access of safe form in work places where the protection against falls of the workers is due to guarantee, such as: Aeolian towers, chimneys, towers of telecommunications, covers, tracks of tread, traveling cranes, access to wells, etc.
All our equipment is certificates by notified organisms.
Our range includes:
System FABA A12: Stairs with integrated security system or anti-fall rail in the heat of the moment to mount to existing stairs in galvanized steel or stainless steel. The system offers to the worker a optimum protection and a great freedom of movement, the hands are available and they do not have to be used to take hold itself to the stairs, reason why the power is made possible to take with himself the material and tool, and in addition, in case of fall the system on the other allows to the rescue person without needing using other additional systems and disconnecting the arresting gear.
System EASYCLIMBER: Stainless steel cable quality AISI-316L with absorber of reajustable energy in case of fall and that less than reduces the load on the structure to 6Kn. The system allows its use by 4 people although consecutive falls take place, being able to realize the rescue using the same like anti-fall protection. These qualities cause that the system has an economic maintenance in relation to other systems that in case of fall this are unutilised
|
|
|
|
|
|
The Latchways ManSafe for Ladders system provides outstanding personal safety for individuals working on any type of fixed industrial ladder. Applications include chimneys, towers, cranes and silos.
Such is the simplicity of the design concept that ManSafe for Ladders can be installed to follow the contours of the structure to which it is attached and so maximise its safety value in a working environment.
Equally, the proven effectiveness of the system's LadderLatch unit with its unique Latchways starwheel component provides workers with the security of being constantly attached to the system while also having both hands free to go about their duties. If a worker should fall from the system, the LadderLatch unit immediately locks onto the system cable and arrests the fall.
In the event of a fall, a worker attached to a ManSafe for Ladders system is far less likely to be injured during the fall arrest process compared to a fall from a traditional hoop system. Whereas hoop systems prevent a worker falling backwards off a ladder, the hoops themselves present a significant threat if the worker should fall down a ladder.
|
|
Flexible scale with double straps.
It is about a scale especially designed for the sloping roofs. Double SECURECHELLE® marries the shape of the roof with a great stability.
To note, that the speakers must always be hung to a rail anchor in conformity with the standard INTO 795 by protective gears individual in conformity.
|
|
To increase safety and achieve the operational efficiency you desire from your system. Wildeck designs and manufactures a wide range of products and accessories that can be easily integrated with your mezzanine or purchased separately
Safety Ladders
- Space-saving vertical ladders
- Caged Vertical Ladder Ideal for service or emergency access
- Integral safety cage dependent on height or customer request
- Cage pre-welded to ladder (or as a field assembly)
- Custom ladder designs
|
|
|
scale PIT STOP scale for cassero in aluminum. Only hung 16 Practical and manageable Kg. to use in yard.
|
|
A winding staircase can have either one or two stringers.
If there is only one stringer, then this is fitted either on the
inside or in the middle. If in the double stringer design,
the two stringers are on the outside and the inside.
Winding staircases are not only the most elegant breed of
the stairway species; in the winding escape design, they
also offer additional safety on account of their larger
diameter and wider treads.
Few decades ago, the design of a staicase oriented itself rather by historical and oversized models. Today's staircase are often reduced to the minimum requierments. For mounting several floors, most people prefer taking the elevator anyway.
The modern spiral stairs impress by their elegant design, the subtle interplay of shape and material. One is really tempted to use such stairs.
|
|
|
|
|
|
Stools of safety
Use - Individual and professional for the operations of "picking", to be always "with the height" and in safety, in narrow alleys: stores, files, libraries, warehouses.
Construction - weld steel tubular Chassis.
Crawl of safety on the left side of the scale of access. Plate and steps in multiplis with phenolic joining, non-skid aluminum alloy sheet with checkerworks or out of grating, depth 150mm approximately.
Railing on 3 sides, made up of a handrail out of tube, a stringer with middle height and a plinth of 150mm. Shelf of consultation on all the models.
Bearing - Train of bearing consisted a lifting framework equipped with 4 casters: 2 fixed and 2 swivelling gone up with polyamide ERNYL® wheels of Ø80mm. Protection - Oil-based paint. Charge with maximum use 150Kg.
Operation - Ordering of the lifting framework by a lever which, drawn and maintained with a hand with the slope of safety, puts the 4 wheels in contact with the ground and raises the stool. This one can then roll and be operated without sorrow. The stool being brought to the desired place, it is enough to release the lever: the 4 feet rest then on the ground and stability is total, the train of automatically being retracted bearing.
The user cannot thus climb the steps without releasing the control stick, which ensures a total safety.
|
|
An economic solution to increase your buildings without push the walls.
An exceptional reliability thanks to the minimum of components (bolts, beams,...)
A set-up time twice faster
Absence of welding guaranteed by a solidity tested in laboratory.
- Light Framework - Modularity - Note of calculation included/understood - Broad choice of color
Certified ISO9001
Metal posts of section 120x120 Misters Their thickness is adapted according to the running cost. The broad ones platinizes 200x200 mm ép. 10 mm ensure a perfect burden-sharing. They are fixed on the ground by 4 M12x100 Ankles.
The carrying beams are carried out in profile C steel of completion Galvanisée, they come to be bolted on the capitals.
The beams are carried out in profile Σ steel of Galvanized completion, they come to be bolted on the carrying beams using autoconnect.
Profiles out of C and Σ are manufactured in several thicknesses in order to optimize the profiles according to the operational requirements.
|
|
Industrial/Warehouse Mezzanine platforms can enable you to expand your business without moving, building or acquiring new premises - simply by making use of the space over-head.
Free initial site survey, Detailed quotation with CAD drawing, full building regulations application, in-house design and manufacture, experienced and qualified installation team, Project management
|
|
|
After having conceived and having carried out structures in cold profile, TDEM was essential in the field of the industrial platform thanks to a concept answering the current constraints of the market and also the absolute respect of the standards in force.
|
|
DUWIC’s platforms enable you to double the storage surface area in your warehouses. They are modular as they can be adapted to suit your needs.
Made from very high-resistance cold metal section metal, these are real platforms on solid posts.
Our design office assesses and determines the most appropriate solution depending on your limitations (fixed or rolling loads, passageways under the structure, etc)
DUWIC’s palette safety augmentation system (SAS) ensures greater safety for your handling of palettes on platforms.
|
|
Punt forms heavy for storages and offices
Our platforms ensure the return on your investment:
• Specialist in the great ranges up to 12 meters.
• Specialist in the strong loads of 350 kg to 4000 kg/m2.
• Delivery period and very fast assembly.
• An entirely flexible range,
|
|
Industrial staircases are exposed to great stress
day in, day out. No matter how harsh the
conditions are, once erected, they have to be
able to carry out their function reliably.
Whether in the food industy, heavy industry, warehouse, production halls, or as shown here, as stairs and footbridges in a purification plant.
It stands to reason that all safety aspects prescribed by the professional associations are taken into consideration.
|
|
Suspended platform for wind turbine
The FIXATOR® suspended platform designed for the maintenance and exterior cleaning of wind turbines provides safe access to the blades and towers of the wind turbine.
Its aluminium design makes it light. This platform made up of modular components is quick to set up and not very bulky.
|
|
| ... products without technical information |
| |
|
|
Platforms, Stairs, Ladders
