Coolers

... EXAIR HazLoc Cabinet Coolers circulate 20°F (-7°C) air inside the enclosure to prevent high temperature faults. They mount in a standard electrical knockout while keeping the NEMA 4 or 4X rating of the enclosure. Cabinet ...

Continuous operation Hazardous Location NEMA 4X (IP66) Cabinet Cooler Systems are engineered and approved for use upon purged electrical enclosures found within classified areas. These HazLoc Cabinet Cooler ...

Maximum temperature: 20 °F

... Mini Cooler is ideal for applications where liquid cooling cannot be used due to part contamination or cost. Tolerances, product finish and production rates can improve dramatically. In addition to preventing premature ...

We launched impingement freezing in the 1990’s because food processors were looking for a cost-effective alternative to cryogenic freezing of hamburger patties. Since then we have found numerous applications for this method of fast freezing. ...

The Fein GRIT GWX is a high performance cooling lubricant module for various wet grinding applications. The unit can be used in conduction with belt grinders GX 75 (2H) and GI 75 (2H) while ensuring perfect surface results and binds swarf ...

JULABO immersion coolers are primarily employed for countercooling open bath circulators to ambient temperature or below as well as for rapidly cooling liquids. JULABO immersion coolers have a small footprint ...

JULABO immersion coolers are primarily employed for countercooling open bath circulators to ambient temperature or below as well as for rapidly cooling liquids. JULABO immersion coolers have a small footprint ...

JULABO immersion coolers are primarily employed for countercooling open bath circulators to ambient temperature or below as well as for rapidly cooling liquids. JULABO immersion coolers have a small footprint ...

Power: 162, 293, 586, 820 W

This Vortex cooler, BP, with a IP 66 protection degree, is easy to install, has no moving parts, and is maintenance free. In addition to cooling, it also reduces the relative humidity within the enclosure it is mounted ...

Power: 293 W

... temperature Vortex cooler, HT, with a IP 66 protection degree, is easy to install, has no moving parts, and is maintenance free. In addition to cooling, it also reduces the relative humidity within the enclosure it is ...

Flow rate: 200 l/h - 1,000 l/h

The HC-100A chiller is ideal for use with hydroponics systems and fish tanks. Temperatures can be set accurately with its digital control technology and the on board electronic display makes the chiller ...

Flow rate: 200 l/h - 3,000 l/h

The HC Chiller series has been specifically designed to cool or heat water for large hydroponic and aquatic systems. Integrated with on board electronic digital display the HC series is ideal for accurate temperature ...

Flow rate: 200 l/h - 3,000 l/h

Digital temperature control technology ensures accuracy Anti-corrosive pure titanium evaporator for fresh and salt water use

Cold make-up water is heated up in the feed water cooling module by using the warm feed water in a heat exchanger. As a result of the feed water cooling down, there is a larger temperature difference between the water and flue gas in ...

Power: 732 W
Maximum temperature: 0 °C - 80 °C

... setpoint of +/- 1.6 deg C. Vortex Enclosure Coolers are available in cooling capacities ranging from 117 to 1465 Watts. Enclosure Coolers keep Electrical and Electronic Enclosures cool, clean and protected ...

Power: 1,465 W
Maximum temperature: 0 °C - 80 °C

Vortex A/C Coolers incorporate the most up-to-date features into Vortec’s line of highly reliable, cost effective enclosure coolers. Sleek, modern design Noise reduction of 78%, when compared ...

Power: 733 W
Maximum temperature: 0 °C - 80 °C

Vortex A/C Coolers incorporate the most up-to-date features into Vortec’s line of highly reliable, cost effective enclosure coolers. Sleek, modern design Noise reduction of 78%, when compared ...

Maximum temperature: 0 °C - 100 °C
Flow rate: 0.1 l/s - 0.6 l/s
Pressure: 0 bar - 16 bar

The Sample Coolers are part of the boiler controls and systems that are assembled by Spirax Sarco. These tools are not only made with stainless steel, but also has the capability of gathering boiler water samples safely. ...

Flow rate: 55 m³/h - 900 m³/h

Energy-efficient version of the RTT fan-and-filter units with EC technology. From 180 m³/h with integral control interface (0-10 V / PWM input and tachosignal output) to regulate and monitor the fan.

Power: 8 kW - 40 kW

TopTherm chillers in a TS enclosure can be integrated perfectly into an enclosure suite. With their small footprint, modular design and dual-frequency compatibility, they are extremely flexible. In addition, they promise ...

Power: 15 kW - 481 kW

Especially for cooling IT applications, such as LCP or air/water heat exchangers. Safety-relevant features such as redundant speed-controlled pumps, compressors or buffer stores.

Power: 40 W
Maximum temperature: 50 °C
Pressure: 10 bar

The integrated sample gas cooler is manufactured by ABB that aims power and productivity for a better world. Guarantees to be user friendly and will definitely enhance work productivity. Its key features includes constant ...

Power: 2,200 W - 6,700 W

The EXW are series of heat exchanging device which are designed to cool certain conditions when water or refrigerated water from cooling tower is accessible. In this version, this device is made to be installed in roofs or top most area ...

Power: 2,200 W - 7,500 W

The EXW are wide array of air / water heat exchangers manufactured by Cosmotec. These equipment are available in 8 sizes that exhibits a cooling capacity of 870 up to 25000 W. In addition, these heat exchangers offers 2 floor mounted ...

Power: 160,000 W - 550,000 W
Maximum temperature: 7 °C - 35 °C
Flow rate: 28.42 m³/h - 67.26 m³/h

... , asembled by Cosmotec, is a water chiller equipped with a V-shaped coil that uses Microchannel technology and permits a maximum accessibility to its components. Moreover, a reduce coil thickness of this water chiller ...

Power: 110, 145, 240, 230 W
Maximum temperature: -35 °C - -20 °C

... Techne® Flow Coolers work in conjunction with a Techne® thermoregulator. The bath liquid flows through the unit which continually extracts heat from the bath fluid by means of the heat exchanger which is built into the ...

Power: 110, 145, 230, 240 W
Maximum temperature: -35 °C - 20 °C

... head of the Techne® Dip Cooler fits neatly and unobtrusively into the corner of the bath and can be secured with a specially designed mounting bracket (supplied). If cooling can be achieved by using cold tap water, a ...

Maximum temperature: 4 °C - 15 °C
Flow rate: 20 l/min

The CH-5/PC-5 Chiller/Pump Unit is designed for use in conjunction with the TECAL 140 H & S Calibrators to achieve calibration temperatures down to -40°C. This unit provides a chilled water supply which is pumped through the Heatsinks ...

Power: 380,000 W

... Gesellschaft Wärme Kältetechnik mbH has advanced the continuous development and modernisation of its range of compact water chillers and adapted it to the changing market requirements in close cooperation with customers.[nbsp] ...

Energy-efficient chillers with free cooling function and integrated temperature control circuits

- gwk chillers in the SKLC series are air-cooled compact cold water units with integrated condenser - gwk chillers in the SKW series are water-cooled compact cold water units cooled with external cooling ...

Power: 5.7 W - 83 W

Economical Electronic Enclosure Cooling for a Range of Environments EIC’s HE Series Heat Exchangers are closed-loop systems that have been designed to provide cooling for computer and electronics enclosures in environments where the ...

Power: 17 kW
Maximum temperature: 70 °C
Flow rate: 30 l/min

ATEX approved oil supply system is designed for stationary operation for the cooling and filtering of gear oils Universal Hydraulik GmbH now also develops and builds oil supply systems which can be used in potentially explosive environments. ...

Pressure: 50, 100, 500 bar

HIGH PRESSURE DESIGNS ACCORDING TO INDIVIDUAL NEEDS Max. 50 - 100 - 500 bar possible Welded tubes Fully welded shell

Hydraulic as part of mobile applications are often required. You will find our hydraulic as part of mobile oil/air coolers, municipal vehicles, concrete mixers and construction/agriculture machines.

Power: 0.8 kW
Maximum temperature: 10 °C - 40 °C

SpecialSeries – limited edition for water temperature from +10°C up to +40°C, at ambient temperatures up to +45°C Mobile unit for the use with individual or multiple machines

Power: 5,000 W
Maximum temperature: 10 °C - 45 °C
Flow rate: 75 l/min

Power: 14,000 W
Maximum temperature: 10 °C - 45 °C
Flow rate: 75 l/min

Power: 2 kW - 440 kW
Maximum temperature: 7 °C

Power: 23 kW - 355 kW

... Complete hydraulic circuit: tank, pump, manometer, flow controller, etc. • Guaranteed energy saving Free-cooling – The chiller is equipped with a “FREE-COOLING” system to save energy by using outdoor air when weather ...

Power: 98 kW - 1,350 kW

Power: 4,400 W - 140,000 W
Flow rate: 0 l/min - 600 l/min
Pressure: 20, 26 bar

... heat exchange range available from jbj Techniques Limited these air/oil coolers with alternate current drives (3 x 400 V) and direct current drives (12/24 V) » Compact Oil-Air Cooler » High cooling ...

Power: 1,500 W

... air-oil cooler for off-line applications. » Low noise level. » Cooling capacity of 1.5 kW / °C (higher levels on request). » Stand alone system. » Operating viscosities of up to 300 cSt. The OCN-Series is an extension ...

Power: 0 W - 500,000 W
Flow rate: 0 l/min - 850 l/min

... BNZ coolers are suitable for all industrial and marine environments. Compact design, robust construction, extremely low pressure drop, high quality materials and ease of maintenance are the prominent features of the ...

Power: 200 W
Maximum temperature: -15 °C - 150 °C

AUDA flow through cooler for cooling heating thermostats up to -30 °C LAUDA flow through coolers make it possible to work at room temperature, since they can be used to add a fully fledged, low-temperature ...

Power: 500 W
Maximum temperature: -30 °C - 150 °C

LAUDA flow through cooler for cooling heating thermostats up to -30 °C LAUDA flow through coolers make it possible to work at room temperature, since they can be used to add a fully fledged, low-temperature ...

Power: 200 W
Maximum temperature: -30 °C - 20 °C

LAUDA immersion cooler for constant cooling to -50 °C LAUDA immersion coolers function using the classic principle of direct vaporization and serve as auxiliary coolers to quickly ...

Extrusion lines for the production of GRANULES Bausano produces extrusion lines suitable for production of granules for subsequent moulding, extrusion or calendering, starting from virgin or recycled material. These lines are fully customisable ...

The unit is manufactured by Haewa, and is an air-to-air heat exchange system, which has been specifically developed to be used in dust-free cooling of cabinets. The model has the capacity to cool cabinets with temperatures up to +40 °C. ...

The Water/Air Heat Exchanger is manufactured by Häwa GmbH, and is specifically designed for enclosure air conditioning application. This device is made as economic and environment-friendly alternative to heat exchanger with chemical ...

These water chillers are utilized in numerous applications which is why these häwa systems are usually customized for individual project needs. The systems can either be incorporated into a standard cabinet, constructed ...

Maximum temperature: -45 °C - 100 °C

The TC100 series is manufactured by Huber Kältemaschinenbau GmbH. This immersion cooler has a temperature range from -100 °C to +40°C. With its simple and versatile construction, the TC100 is applicable for a wide variety ...

Maximum temperature: -50 °C - 50 °C

... replacement of dry ice. For many applications immersion coolers are also an environmentally friendly alternative to mains water cooling. The TC immersion coolers are suitable for unsupervised use, for ...

Maximum temperature: -100 °C - 40 °C

... replacement of dry ice. For many applications immersion coolers are also an environmentally friendly alternative to mains water cooling. The TC immersion coolers are suitable for unsupervised use, for ...

Definition: Rapid cooling for refractory steel laddle, to cool items treated under protective gas, avoiding contact with air. Construction: Metal construction. Ventilator within housing. Closing cover to conduct hot air towards the back. Electricity: ...