... is an interesting machine for diversified simple application; it is suitable for continuous operation. The tank and the evaporator are adequately engineered and ensure stable and accurate water temperatures even with sudden load variations. - ...
Frigosystem S.r.l.
... The Custom Cooler is manufactured by Lytron, and is specifically designed as a liquid-to-air cooling system also used as an ambient cooling system or modular cooling system. This cooler ...
Lytron
Power: 1,185, 265, 795 W
Maximum temperature: -20, -40, -10 °C
... Capacity: (Grids not supplied) Compatibility GN 1/1 and 600 x 400 4 pairs of 3 points renforced grid holders included Blast Chilling: 20 kg, cycle 110 min, 16 kg, cycle 90 min, cooling of mashed potatoes in 5.5 cm thick GN1/1 tray, 5 kgs per ...
ACFRI
Power: 1 kW - 100 kW
... fans Warm air generation for hall heating Hot water generation for heating support Mechanical design Refrigerant evaporator in stainless steel design without CU reinforced / additional high pressure pump(s) enlarged stainless ...
Weinreich Industriekühlung GmbH
Power: 1.8 kW - 60 kW
Maximum temperature: 40, 50 °C
... Compact HOFFMANN Water Coolers WRK are suited for all applications requiring cold water. The equipment produces cold water in open or closed circuits, which is then used in downstream heat exchangers. HOFFMANN Water Coolers ...
HOFFMANN APPARATE
... Series Suplemental Cooling System are used where heat recovery chilling systems are not required. Sterling’s Winter-Kooler is an energy-saving supplemental chilling system that is designed to allow process cooling water to bypass your ...
Power: 19.9 kW - 832 kW
... monobloc groups. These are manufactured in two different versions: with a built-in tank or an external reservoir (V). These chillers are suitable for modular use with units of similar or different cooling capacity and at different times. The ...
Industrial Frigo S.r.l.
When the products need to be passed from the cooling process, this machine quickly cools the nuts with high efficiency. Thanks to the reverse suction fan at the bottom, the products on it quickly pass to room temperature. And after that, the products ...
Power: 1.1 kW - 40 kW
Maximum temperature: 0 °C - 5 °C
Flow rate: 5 l/min - 500 l/min
... Water Chillers are used for various applications in differnt industries including Foundries, Machine Tools, Plastics, Chemicals, etc. Our Compact Super Chiller series are available in both air-cooled and water cooled ...
... • Blower and air knife systems custom designed to cool conveyorized products down to ambient temperatures • Let us know the starting and ending temperatures and throughput rates • Eliminate expensive compressed air and reduce energy usage ...
Power: 145 BTU/h
Flow rate: 57 l/min
... of our competitors all of the our Cabinet Cooler ™ Cabinet Panel Coolers are stainless steel, not just the vortex tube for longer life and flexible use.™ Cabinet Cooler are compact and can be installed ...
AirMasters
Maximum temperature: -20 °C - 48 °C
... more than 10 safety protection functions; Chiller unit is suitable for operation in a wide outdoor temperature range, from -20˚C~48˚C The system keeps operation when parts of compressors failure The chiller adopts ...
Flow rate: 90 l/min - 900 l/min
... The Industrial chiller is specially designed on purpose to be used in the plastic manufacturing industry . this equipment can greatly raise the working efficiency of manufacturing machines and obviously improve the quality of products ...
... white or blue. > Adjustable stainless steel knives at either end of the tunnel. > Drive at the end of the tunnel. > Cooling system completely insulated and double jacketed. > Direct or indirect convection or radiation cooling. > ...
Maximum temperature: 200 °C
Pressure: 15 bar
... The SC series of sample coolers provide high cooling efficiency, being most suitable for most liquid, gas or vapor phase applications. ...
... Rotary Cooler Rotary cooler is a cooling device which is based on conventional rotary cylinder and has a regular internal installation of cooling heat exchange tube. In the cooler, the material flows ...
... Our oil coolers are system components for the safe operation of screw compressors. For each application BITZER offers the right oil cooler air- or water-cooled, for HCFCs and chlorine-free HFCs as well as for ammonia. ...
Power: 1,125, 1,700 W
Maximum temperature: 2 °C - 3 °C
Flow rate: 40 l/h - 450 l/h
... optimal cooling capacity is reached. The ice water chillers are equipped with a digital Ice Mass Sensor (IMS) allowing optimum control over the accumulation of ice and maximum continuity. The water chillers are easy to ...
Baktec
... COOLING SLABS Specifications Stainless steel frame and cladding Cooled by evaporators situated directly under the belt using freon as the cooling agent Independently regulated functions Available with covering hoods on request Automatic ...
MORCOS Egyptian Engineering Company
... come in different model types, such as tunnel coolers, rack coolers and spiral coolers air conditioning, to suit the product and plant. All types are equipped with an ambient and chilled air. The tunnel ...
... The Aisle-Cocooning System is a cold aisle containment solution that provides segregation of cold aisle air flow from hot aisle exhaust air, in data centers. This protects equipment against damage, prolongs equipment life, reduces the load on the computer ...
Power: 15, 7.5, 5.6, 27, 19 kW
The necessary ice water vats to include to the mix treatment plants Mod. Mixworking, supply ice water (+2°C) to both the ageing vats for the conservation of the mix at 4°C and to the plate exchanger for the instant cooling of the ice-cream mix at +4°C.
Power: 2,000 W - 170,000 W
Maximum temperature: 5 °C - 45 °C
Power: 2 kW - 360 kW
Maximum temperature: 0 °C - 25 °C
... Ideal for the precision cooling of water used in typically in laser marking, cutting and welding processes. Product Overview The performance of high-powered lasers depends on effective cooling. High-powered lasers generate a significant amount of heat ...
... The VAS Cooling system offers a range of significant benefits for modern tobacco processing. It ensures the retention of filling power after drying, delivering high-quality results that enhance product consistency. With minimal deviations ...
the best suppliers