Coolers
Chiller Production of ice water in high calories.
Power: 750 kW
Maximum temperature: 230, 120 °C
Flow rate: 430 l/min
... charge air cooler (Intercooler) is the solution for demanding applications where reliability and performance are requested. Tubestack Ø170mm and 354mm long for marine or industrial applications More info This ...
MOTA
Maximum temperature: 90 °C - 120 °C
Flow rate: 30.6 l/min
Pressure: 10 bar - 16 bar
"E" range Oil cooler with Ø65mm diametre, 161mm length and 4 passes on cold side. Standard version, with copper tubes and brass covers. More info Our new standard range of oil coolers has been ...
MOTA
Maximum temperature: 90 °C - 120 °C
Flow rate: 8 l/min - 30.6 l/min
Pressure: 10 bar - 16 bar
""E"" range Oil cooler with Ø65mm diametre, 411mm length and 4 passes on hot side. Standard version, with copper tubes and brass covers. MORE INFO Our new standard range of oil coolers has been ...
MOTA
Automated spiral cooling systems help to speed up the operation of line and extend the shelf life of bread products. Equipment is designed according to individual client needs. • Manufactured to suit individual needs: ...
Maximum temperature: 5 °C - 50 °C
... The ECP 1000C gas cooler is used in gas analysis to lower the dew point of humid to avoid condensation in the analyser. An extremly stable gas dew point avoids water vapour crosssensitivity and volumetric errors. Electric ...
M&C TechGroup Germany GmbH
Maximum temperature: 5 °C - 50 °C
... The ECP 2000C gas cooler is used in gas analysis to lower the dew point of humid to avoid condensation in the analyser. An extremly stable gas dew point avoids water vapour crosssensitivity and volumetric errors. Electric ...
M&C TechGroup Germany GmbH
Maximum temperature: 5 °C - 50 °C
... The ECP 3000C gas cooler is used in gas analysis to lower the dew point of humid to avoid condensation in the analyser. An extremly stable gas dew point avoids water vapour crosssensitivity and volumetric errors. Electric ...
M&C TechGroup Germany GmbH
Flow rate: 4,000, 2,000 l/min
The C 072 model, and the C 076 model are manufactured by Acf, and are air coolers that have a rated purification capacity that ranges from 2,000 l/min up to 4,000 l/min. They are equipped with a pressure gauge, and features ...
Power: 40 W
Flow rate: 600 m³/h
The air forced fan cooling system allows the transformer to withstand higher powers than rated ones and to maintain an optimal temperature increasing the safety of the machine. The installation of the fans on machines ...
TECSYSTEM srl
Power: 41 W
Flow rate: 720 m³/h
The air forced fan cooling system allows the transformer to withstand higher powers than rated ones and to maintain an optimal temperature increasing the safety of the machine. The installation of the fans on machines ...
TECSYSTEM srl
Power: 41 W
Flow rate: 800 m³/h
The air forced fan cooling system allows the transformer to withstand higher powers than rated ones and to maintain an optimal temperature increasing the safety of the machine. The installation of the fans on machines ...
TECSYSTEM srl
Maximum temperature: 343, 621 °C
Flow rate: 3.5 l/min
Pressure: 450, 300, 356 psi
The Sentry FLR sample cooler cools a sample from a process stream. It may seem simple, but it is a uniquely designed small tube in a shell heat exchanger. The sample cooler is compact and provides broad ...
Sentry Equipment
Filtered Cooling Unit to ensure optimal performance and reliability. BOFA’s Advantage 200 Cooling Unit is an electrically driven, cooling air unit. It supplies cool, filtered air to both the laser and power supply module. This clean, ...
BOFA International
... can increase the water temperature within the tank shower to levels which may scald a user upon activation. This flameproof chiller is suitable for use in hazardous environments, ATEX Zone 1, and will maintain the water ...
Maximum temperature: 16 °C - 38 °C
... should be tepid. In extreme hot climates solar radiation can heat water within the tank to dangerous levels. The Zero Power Cooler, designed and developed in collaboration with Celantel, uses the night time ambient temperature ...
With the vacuum technology, you can manufacture and deliver bread, rolls and pastry as part-baked products. Food retailers can also be supplied with part-baked products for sale to consumers in a quality that was not available previously. ...
WAFER SHEET COOLERS Specifications Used for stress-free cooling of flat and hollow wafer sheets at ambient temperature after baking and before spreading or conditioning Also used for the vertical transport of wafer ...
COOLING SLABS Specifications Stainless steel frame and cladding Cooled by evaporators situated directly under the belt using freon as the cooling agent Independently regulated functions Available with covering ...
WAFER BOOK COOLERS Specifications Used for the cooling of cream-filled wafer books after spreading and before cutting A cooling time of 10 min Up to about 1100 books/h can be processed Little space requirements Quick ...
Power: 0.16 kW - 0.43 kW
Flow rate: 1,675 m³/h - 2,500 m³/h
... the coolant ambient air that passes over the radiant by means of a fan operated by an electric or hydraulic motor. The cooler element, in high resistance aluminium alloy, is obtained by means of a braze-welding process carried ...
Emmegi Heat Exchangers
Cooling system to be connected to the undevacuum homogenizer or to the tube filling and closing machine. Dimensions and capacity following to the custoner needs.
... Probe Style Coolers - Excellent for trapping and Dewar-type applications, these coolers reduce the expense of using dry ice or liquid nitrogen. A flexible hose allows convenient placement of the cooling ...
Power: 500 W - 9,000 W
Maximum temperature: -20 °C - 35 °C
Flow rate: 5, 3, 13 l/min
... and higher laboratory costs. LabTech offers a complete line of recirculating water chillers to match all laboratory needs. The LabTech’s state-of-the-art water chillers ensure accurate and constant cooling ...
Power: max 1200.0 W
Maximum temperature: -10 °C - 40 °C
FRYKA recirculating chillers: - pleasantly quiet due to particularly low-noise components - higher energy efficiency through fan with EC technology - user friendly handling and operation - high quality workmanship ...
FRYKA-Kältetechnik GmbH
SINGLE AND DOUBLE STEEL BELT COOLERS engineered by Berndorf Band Group are used for a wide range of production processes. From cooling and crystallization to pastillation of materials like sulphur, powder paint and chemicals ...
... between two chilled surfaces, a faster cooling process resulting in a higher capacity can be achieved with the same overall cooler length. Additionally, it enables effective cooling of thick products at high production ...
PRODUCT SPECIFICATION FAN INFO Fan Motor Type: EC Fin Spacing: 4 per Inch Fan Diameter: 10.83 In Fan Air Throw: 29 Ft Fan Air Output: 559 CFM Fan Motor Maximum Amperage 115V: 0.29 GENERAL Air Defrost Unit: AIR Solenoid ...
TECUMSEH
Fan Motor Type: EC Fin Spacing: 4 per Inch Fan Diameter: 10.83 In Fan Air Throw: 29 Ft Fan Air Output: 559 CFM Fan Motor Maximum Amperage 115V: 0.29 GENERAL Air Defrost Unit: AIR Solenoid Valve: No PRODUCT OVERVIEW Refrigerant: ...
TECUMSEH
Fan Motor Type: EC Fin Spacing: 4 per Inch Fan Diameter: 10.83 In Fan Air Throw: 29 Ft Fan Air Output: 559 CFM Fan Motor Maximum Amperage 115V: 0.29 GENERAL Air Defrost Unit: AIR Solenoid Valve: Yes PRODUCT OVERVIEW Refrigerant: ...
TECUMSEH
Maximum temperature: 60 °C
Cost-effective cooling for sampling close to the process thanks to our passive cooling system - low-maintenance and explosion-proof. Samples of fluids and gases in industrial plants are often very hot. That can be ...
Power: 0 kW - 10 kW
Maximum temperature: -20 °C - 100 °C
Flow rate: 0 l/min - 100 l/min
Our standard oil/air cooler range is still setting the bench mark in the markets. We offer short lead times and the densest program of pressure resistant coolers with all relevant features. Our internal ...
ASA technology Produktions- und Vertriebs GmbH
Power: 0 kW - 0.6 kW
Maximum temperature: -20 °C - 80 °C
Flow rate: 0 l/min - 300 l/min
Our standard oil/air cooler range is still setting the bench mark in the markets. We offer short lead times and the densest program of pressure resistant coolers with all relevant features. Our internal ...
ASA technology Produktions- und Vertriebs GmbH
Power: 0 kW - 0.6 kW
Flow rate: 0 l/min - 250 l/min
Pressure: 35 bar - 210 bar
The H-cube is a modular system, which offers three tank sizes with four oil/air cooler sizes, various fan drive types and a suction or return line filter. With its compact dimensions and the flexibility of cooling performances ...
ASA technology Produktions- und Vertriebs GmbH
Pressure: 4 bar
Liquid Cooler FKS3400 SERIES APPLICATION Application: Supplement to air-cooled shrinking devices The liquid cooler FKS 3400 is a separate machine for cooling chucks which have been heated up during ...
Maximum temperature: 5 °C - 50 °C
Compressor Cooler Nominal capacity 615 kJ/h respectively 583 Btu/hr 1 or 2 gas paths Stainless steel, glass or PVDF heat exchanger Status display Up to 45 °C / 113 °F ambient temperature Approvals: ATEX, EAC Ex, ...
Bühler Technologies
Power: 1,600 W - 44,000 W
Maximum temperature: -15 °C - 80 °C
Flow rate: 8 l/min - 88 l/min
The BNK series off line oil/air blast cooler features an integrated circulation pump. It is simple to maintain and provides low noise emissions. A by-pass can also be supplied. These high performance off-line coolers ...
Bühler Technologies
Maximum temperature: 5 °C - 55 °C
Pressure: 0 Pa - 200,000 Pa
Peltier cooler with 1 heat exchanger Version for ambient temperatures up to 50 °C Nominal capacity 55 kJ/h (at 5 °C output dew point) Power supply 24 V DC Heat exchanger made from stainless steel, Duran glass or PVDF Dew ...
Bühler Technologies
Power: 2,500 kW - 8,000 kW
2.The heat exchange core set is made of copper-aluminum or wear plate that made of copper-aluminum, copper-copper, steel- aluminum. 3.The cooling water pipe lineis composed of single pipe or copper-copper double pipe. 5.The size ...
ERG Technology
Power: 550 W
Flow rate: 2,000 m³/h
Force-air-circulation cooling table for moulds of diameter up 400 mm. The optimum cooling of the moulds leads to its reuse sooner, for higher productivity and longer durability of moulds. It also useful to reduce defects. TRA MATIC ...
Power: 560 W
Flow rate: 2,000 m³/h
Cooling table with force-air circulation for moulds of diameter up 400 mm provided with air conveyor hood. The optimum cooling of the moulds leads to its reuse sooner, for higher productivity and longer durability of moulds. It also ...
Power: 560 W
Flow rate: 2,000 m³/h
MOULD-COOLING TABLE WITH DOUBLE FLATBED Cooling table with force-air circulation for moulds of diameter up 400 mm provided with two working surfaces. The optimum cooling of the moulds leads to its reuse sooner, for higher productivity ...
Power: 145, 240, 110, 230 W
Maximum temperature: -20, -35 °C
... head of the Techne® Dip Cooler fits neatly and unobtrusively into the corner of the bath and can be secured with a specially designed mounting bracket (supplied). If cooling can be achieved by using cold tap water, a ...
Techne Calibration
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining