Liquid coolers

JULABO immersion coolers are primarily employed for countercooling open bath circulators to ambient temperature or below as well as for rapidly cooling liquids. JULABO immersion coolers ...

JULABO immersion coolers are primarily employed for countercooling open bath circulators to ambient temperature or below as well as for rapidly cooling liquids. JULABO immersion coolers ...

JULABO immersion coolers are primarily employed for countercooling open bath circulators to ambient temperature or below as well as for rapidly cooling liquids. JULABO immersion coolers ...

Flow rate: 200 l/h - 1,000 l/h

The HC-100A chiller is ideal for use with hydroponics systems and fish tanks. Temperatures can be set accurately with its digital control technology and the on board electronic display makes the chiller ...

Flow rate: 200 l/h - 3,000 l/h

The HC Chiller series has been specifically designed to cool or heat water for large hydroponic and aquatic systems. Integrated with on board electronic digital display the HC series is ideal for accurate ...

Flow rate: 200 l/h - 3,000 l/h

Digital temperature control technology ensures accuracy Anti-corrosive pure titanium evaporator for fresh and salt water use

Cold make-up water is heated up in the feed water cooling module by using the warm feed water in a heat exchanger. As a result of the feed water cooling down, there is ...

Maximum temperature: 0 °C - 100 °C
Flow rate: 0.1 l/s - 0.6 l/s
Pressure: 0 bar - 16 bar

The Sample Coolers are part of the boiler controls and systems that are assembled by Spirax Sarco. These tools are not only made with stainless steel, but also has the capability of gathering boiler water ...

Power: 2,200 W - 6,700 W

The EXW are series of heat exchanging device which are designed to cool certain conditions when water or refrigerated water from cooling tower is accessible. In this version, this device is made to be ...

Power: 2,200 W - 7,500 W

The EXW are wide array of air / water heat exchangers manufactured by Cosmotec. These equipment are available in 8 sizes that exhibits a cooling capacity of 870 up to 25000 W. In addition, these heat exchangers offers ...

Power: 160,000 W - 550,000 W
Maximum temperature: 7 °C - 35 °C
Flow rate: 28.42 m³/h - 67.26 m³/h

... Techno, asembled by Cosmotec, is a water chiller equipped with a V-shaped coil that uses Microchannel technology and permits a maximum accessibility to its components. Moreover, a reduce coil thickness ...

Power: 110, 145, 240, 230 W
Maximum temperature: -35 °C - -20 °C

... Techne® Flow Coolers work in conjunction with a Techne® thermoregulator. The bath liquid flows through the unit which continually extracts heat from the bath fluid by means of the heat exchanger which ...

Power: 110, 145, 230, 240 W
Maximum temperature: -35 °C - 20 °C

... ® Dip Cooler fits neatly and unobtrusively into the corner of the bath and can be secured with a specially designed mounting bracket (supplied). If cooling can be achieved by using cold tap water, a dip cooler ...

Maximum temperature: 4 °C - 15 °C
Flow rate: 20 l/min

... chilled water supply which is pumped through the Heatsinks on the Tecal 140 H & S units allowing the Tecal to reach -40°C. The unit is designed to run on distilled or deionised water. The CH-5/PC-5 can also be ...

Power: 380,000 W

... Gesellschaft Wärme Kältetechnik mbH has advanced the continuous development and modernisation of its range of compact water chillers and adapted it to the changing market requirements in close cooperation ...

- gwk chillers in the SKLC series are air-cooled compact cold water units with integrated condenser - gwk chillers in the SKW series are water-cooled compact cold water ...

Clean process water with gwk KU-plants Water is one of the key elements in our daily life. It is a supplier of the most various requirements, also in the area of technical and mechanical production. Water ...

Power: 2 kW - 440 kW
Maximum temperature: 7 °C

... capillary (according to model) Thermostatic pressure-reducing valve (according to model) Dehydrating filter Liquid indicator (according to model) Liquid solenoid valve (according to model) HP/BP ...

Power: 23 kW - 355 kW

... saving Free-cooling – The chiller is equipped with a “FREE-COOLING” system to save energy by using outdoor air when weather conditions permit. The regulation system compares the outdoor temperature, the glycol ...

Power: 30 kW - 370 kW

The CSE ice water units are designed for an installation with sheathing of hot air extraction from the condenser. Water chiller with single-unit air condensation with centrifugal fan. ...

Power: 17 kW
Maximum temperature: 70 °C
Flow rate: 30 l/min

ATEX approved oil supply system is designed for stationary operation for the cooling and filtering of gear oils Universal Hydraulik GmbH now also develops and builds oil supply systems which can be used in potentially explosive environments. ...

Hydraulic as part of mobile applications are often required. You will find our hydraulic as part of mobile oil/air coolers, municipal vehicles, concrete mixers and construction/agriculture machines.

We mount several coolers. If the biggest possible standard cooler does not comply with your needs, we mount them in a row or parallel, no matter if system is oil-air or oil-water cooling. Additional ...

Power: 0.8 kW
Maximum temperature: 10 °C - 40 °C

SpecialSeries – limited edition for water temperature from +10°C up to +40°C, at ambient temperatures up to +45°C Mobile unit for the use with individual or multiple machines

Power: 5,000 W
Maximum temperature: 10 °C - 45 °C
Flow rate: 75 l/min

Power: 14,000 W
Maximum temperature: 10 °C - 45 °C
Flow rate: 75 l/min

Power: 0 W - 372,850 W

Thermal Transfer Products offers a full line of standard catalog hydraulic oil coolers for all industrial machine hydraulics for system cooling - MINIMUM QUANTITY 100 PIECES

Power: 0 W - 372,850 W

Thermal Transfer Products offers a full line of standard catalog hydraulic oil coolers for all industrial machine hydraulics for system cooling - MINIMUM QUANTITY 100 PIECES

Power: 0 W - 372,850 W

Thermal Transfer Products offers a full line of standard catalog hydraulic oil coolers for all industrial machine hydraulics for system cooling - MINIMUM QUANTITY 100 PIECES

Power: 3,000, 5,500 W
Maximum temperature: 10 °C - 40 °C

Line SC cooling baths are specially design to maintain a liquid (water, emulsion (5%)), low viscosity oils(<5°C to 20°C) in tank in temperature range from +5°C to 25°C. This units are dedicated to cool process in ...

Power: 7,500, 8,500 W
Maximum temperature: 10 °C - 40 °C
Flow rate: 5 l/min - 33 l/min

End line chillers ECH (H) have been developed to cool industrial process or machine from an existing cold water loop supply. Compacts regarding floor occupation, they can also be wall mounted. Simple, ...

Power: 6,500, 9,200, 12,000 W
Maximum temperature: 10 °C - 40 °C
Flow rate: 3 l/min - 70 l/min

The model RFC 70-120 is a compact water chiller which conforms to CE standards. It is composed of a refrigeration circuit, a hydraulic component, an electricity regulation element, and a frame structure. The ...

Power: 4,400 W - 140,000 W
Flow rate: 0 l/min - 600 l/min
Pressure: 20, 26 bar

... heat exchange range available from jbj Techniques Limited these air/oil coolers with alternate current drives (3 x 400 V) and direct current drives (12/24 V) » Compact Oil-Air Cooler » High cooling ...

Power: 1,500 W

... air-oil cooler for off-line applications. » Low noise level. » Cooling capacity of 1.5 kW / °C (higher levels on request). » Stand alone system. » Operating viscosities of up to 300 cSt. The OCN-Series is an extension ...

Power: 0 W - 500,000 W
Flow rate: 0 l/min - 850 l/min

... BNZ coolers are suitable for all industrial and marine environments. Compact design, robust construction, extremely low pressure drop, high quality materials and ease of maintenance are the prominent features of the ...

Power: 200 W
Maximum temperature: -15 °C - 150 °C

AUDA flow through cooler for cooling heating thermostats up to -30 °C LAUDA flow through coolers make it possible to work at room temperature, since they can be used to add a fully fledged, low-temperature ...

Power: 500 W
Maximum temperature: -30 °C - 150 °C

LAUDA flow through cooler for cooling heating thermostats up to -30 °C LAUDA flow through coolers make it possible to work at room temperature, since they can be used to add a fully fledged, low-temperature ...

Power: 200 W
Maximum temperature: -30 °C - 20 °C

LAUDA immersion cooler for constant cooling to -50 °C LAUDA immersion coolers function using the classic principle of direct vaporization and serve as auxiliary coolers to quickly ...

... provide uniform cooling in a closed-loop system. Moreover, this product is suitable where a reliable source of clean cool water is available.

... the water which is pumped via a closed circuit to the main water chiller. After cooling, it goes back to the cabinet system for extra cooling. The system is compact both for easy cabinet integration ...

Maximum temperature: -45 °C - 100 °C

... by Huber Kältemaschinenbau GmbH. This immersion cooler has a temperature range from -100 °C to +40°C. With its simple and versatile construction, the TC100 is applicable for a wide variety of rapid liquid ...

Maximum temperature: -50 °C - 50 °C

... replacement of dry ice. For many applications immersion coolers are also an environmentally friendly alternative to mains water cooling. The TC immersion coolers are suitable for unsupervised ...

Maximum temperature: -100 °C - 40 °C

... replacement of dry ice. For many applications immersion coolers are also an environmentally friendly alternative to mains water cooling. The TC immersion coolers are suitable for unsupervised ...

Power: 900 W - 3,600 W

The CHW 29-149 is a water chiller developed by OMI. It is specifically built suitable for welders, inductors, packages, blisters, food-packaging machinery, laser markers, electro-eroders, tooling machines, ...

Power: 2,900 W - 14,900 W

These mono-block refrigerators are supplied with a tank and pump. They are designed for glycolate or water cooling systems and for internal installation. Specific applications include smelters, welders, ...

Power: 16,500 W - 125,000 W

The CHW 162 - 1202 is a mono-block water chiller developed by OMI Italy. It is specifically built suitable for internal and external applications. The unit comes with pump and tank for water or glycolate ...

Power: 10,000 W - 20,000 W
Maximum temperature: 40 °C
Flow rate: 200, 120, 55 l/min

The Hydrive is an oil cooler developed by Mouvex. It is mainly used on hydraulic diver for pumps and compressors. The unit can also be utilized as an oil tank and security relief valve. It is supplied with low weight, ...

Power: 60 W - 220 W
Maximum temperature: -100, -50 °C

The Flexi-Cool Low Temperature Immersion Probe is available in temperature ranges of -50C and -100C and can be custom configured to your application with one of our three standard coils. OEM inquiries are welcome.

... industrial refrigeration applications, Frick® PowerPac™ Chillers are self-contained chilling systems that provide effective solutions and feature the highest quality components. These packaged chillers ...

MOTA designs and manufactures complete cooling systems for OEM applications such as marine engines, industrial engines, gearboxes or industrial hydraulic systems. Various fluids can be cooled, including Glycol water, ...

Power: 2,000 W - 170,000 W
Maximum temperature: 5 °C - 45 °C

Power: 1,000 W
Maximum temperature: 0 °C - 65 °C
Flow rate: 12 l/min

Higher capacity, precision temperature control for PAO and perfluorinated ethers, such as Fluorinert and other process fluids ThermoRack 1000 has been specifically customized to provide leak-free, ±0.1°C temperature control of avionics, ...

Maximum temperature: 300 °C
Flow rate: 60 l/h - 500 l/h
Pressure: 10 bar

Liquid-cooled gas cooler with coiled pipe in different versions, cooling capacity: 900 kJ/h or 1600 kJ/h

Maximum temperature: 300 °C
Flow rate: 60 l/h - 500 l/h
Pressure: 10 bar

The M&C gas and liquid coolers series LGT/LTC are used in analytical technology to lower the temperature of a liquid sample or to lower the dew point of humid sample gas. The coolant ...

Power: 160 W
Maximum temperature: 10 °C
Flow rate: 7 l/min

... bulky machines. Simply connect it to a water bath and it will start to lower the temperature of the liquid inside. The instrument comes with a KIT for connecting to the tank. Features Outer ...