Power: 1.1 kW - 40 kW
Maximum temperature: 0 °C - 5 °C
Flow rate: 5 l/min - 500 l/min
... Water Chillers are used for various applications in differnt industries including Foundries, Machine Tools, Plastics, Chemicals, etc. Our Compact Super Chiller series are available in both air-cooled ...
Maximum temperature: -20 °C - 48 °C
... more than 10 safety protection functions; Chiller unit is suitable for operation in a wide outdoor temperature range, from -20˚C~48˚C The system keeps operation when parts of compressors failure The chiller adopts ...
Maximum temperature: 200 °C
Pressure: 15 bar
... The SC series of sample coolers provide high cooling efficiency, being most suitable for most liquid, gas or vapor phase applications. ...
... Rotary Cooler Rotary cooler is a cooling device which is based on conventional rotary cylinder and has a regular internal installation of cooling heat exchange tube. In the cooler, the material flows ...
... Our oil coolers are system components for the safe operation of screw compressors. For each application BITZER offers the right oil cooler air- or water-cooled, for HCFCs and chlorine-free HFCs as well as for ammonia. ...
Power: 1,125, 1,700 W
Maximum temperature: 2 °C - 3 °C
Flow rate: 40 l/h - 450 l/h
... BKL Ice Water Chillers, work according to the same principle: fresh drinking water under natural pressure, runs through a spiral in a 0°C water bath, forcibly cooled by means of ice, accumulated along ...
Baktec
Power: 15, 7.5, 5.6, 27, 19 kW
... The necessary ice water vats to include to the mix treatment plants Mod. Mixworking, supply ice water (+2°C) to both the ageing vats for the conservation of the mix at 4°C and to the plate exchanger for the instant cooling ...
Power: 2 kW - 360 kW
Maximum temperature: 0 °C - 25 °C
... Carbon dioxide (CO2) lasers, excimer lasers, ion lasers, solid-state lasers, and dye lasers all use liquid cooling to remove excess heat. Laser liquid cooling can help accomplish three goals:• Maintaining a precise laser ...
... Product Overview
The SUPERCOOLER SPV-BIB vacuum insulated
cooler box is fitted with refrigerator-grade Vacuum Insulated Panels (VIPs) on the base and all four sides to provide superior thermal insulation. The exterior surface ...
Power: 20 kW - 150 kW
... Efficient room cooling with a low cost of ownership. Leading edge precision cooling solutions specifically designed to maintain temperature and humidity within extremely tight tolerances. Perfect for racked and non-racked IT loads, these units meet ...
Power: 765 W - 2,750 W
Maximum temperature: -10 °C - 40 °C
Flow rate: 14.7, 11 l/min
... alternative to tap water cooling, these Recirculating Chillers reduce water consumption, while the patented WhisperCool® Environmental Control System reduces noise levels below conversational speech at ...
Power: 1.8 W - 15 W
Maximum temperature: 5 °C - 50 °C
... Immersion type oil cooling units for cutting/grinding liquid that achieve high energy saving rates, low noise, and high-accuracy temperature control. ...
For more than 12 years, Schmitz Cargobull has been offering its own solutions in the field of transport cooling with its S.CU cooling units, which are optimally matched to FERROPLAST® refrigerated bodies and the TrailerConnect® telematics system. Our ...
Schmitz Cargobull
Maximum temperature: 41 °F - 86 °F
Flow rate: 1,350 ft³/min - 38,850 ft³/min
... reutilizing the same water to avoid waste. It always supplies the exact water temperature requested, despite ambient conditions and load requests. Parker Hyperchill water chillers ...
... availability Applications at a closer look HVDC Cooling Systems HVDC cooling systems are project specific. The essential quality factors are water purity and low conductivity. Our Cooling ...
Hitachi Energy
Power: 230, 330 W
Flow rate: 2.2, 2.6 l/min
... •High cooling capacity (200 kj/min) • No priming water required Cascade pump eliminates the need for priming water. •Easy maintenance No tocls are required to replace coolant. Tank and fille^ are easily removable, which makes for easy ...
Power: 1.8 kW - 6.5 kW
Maximum temperature: -20 °C - 55 °C
Flow rate: 400 l/h - 1,500 l/h
... site where utilities supplying cooling water is of a lower quality or special requirements of cooling water are needed, BARTEC BENKE closed loop chillers can be supplied to meet these applications. The ...
... Product type
Inline roll stack — roll stack for mono- and multi-layer sheet extrusion with inline feeding to thermoformers. battenfeld-cincinnati developed high-performance roll stack technologies to save energy and material and to complement ...
... pull-out rack for fast maintenance. The module monitors
water flow and records supply and return temperatures. The
water tank level indicator is illuminated; the illumination colour indicates
water temperature.
Benefits
- High
CLOOS
Maximum temperature: 1 °C - 37 °C
... air-cooled OMAX Chiller optimally supplies inlet water at a consistent temperature, which extends pump seal life for longer, more sustainable production. Using the 5 Ton Chiller or larger also allows ...
Power: 76 kW - 360 kW
Maximum temperature: 5 °C - 45 °C
... • Large water tanks allow minimum compressor cycling and precise temperature control. • Double independent fridge circuits. • 2 compressors from ICE076 and 4 compressors from ICE150 with automatic rotation. • Double stand-by ...
Maximum temperature: 3 °C - 45 °C
... The Water Chiller is an auxiliary piece of equipment to the Blister Machine. It can protect the blisters from deforming by absorbing heat from the forming and sealing mold, thereby increasing the quality of blister forming ...
Maximum temperature: 3 °C - 5 °C
... spots, etc. • It can be also used for dust suppression, static charge prevention, and humidification. *1) Spray capacity at a water pressure of 5.0 MPa when the number of installed nozzles is 8 pcs. The number of installable nozzles ...
... at tap water pressure of 2 kg/c㎡ (0.2 MPa). It varies by the tap water pressure. 4.8 L/hr at 3 kg/c㎡ (0.3 MPa) tap water pressure, 5.1 L/hr at 3.5 kg/c㎡ (0.35 MPa) tap water pressure Up ...
Maximum temperature: 3 °C - 5 °C
... capacity for each nozzle at tap water pressure of 3 kg/c㎡ (0.3 MPa) when 6–7 nozzles are installed. Spray capacity varies depending on tap water pressure and the number of nozzles. Spray capacity for each nozzle with ...
... applications, a polyurethane system often requires extremely exact temperature control methods. Hennecke uses industrial chillers with water circulation whose types and dimensions correspond to the pre-calculated heating ...
Power: 1.1, 1.5, 1.9, 2.5 kW
... The new type of evaporator allows the use of an environmental safe cooling mean. The weldded cooling body with a small volume needs a smaller quantity of cooling mean and it is easier to maintain. Automatic control of operation of the ...
... Process engineering processes KALTGAS is a temperature control system based on the low temperature of liquid nitrogen as a refrigerant. The liquid nitrogen is vaporized in a cryogenic tank by means of a heater (jet). ...
Maximum temperature: 0 °C
... rapidly reduced by means of a shower of water close to 0ºC. Depending on the fruit, the cooling time will vary. How does hydrocooling work? The system consists of: A stainless steel structure. Upper water tank ...
... Cooling Units Answering to the many industrial needs, SIMACO - leader in the fluid moving technology - designed a dedicated range of close loop air-water cooling units, where the SIMACO pump, actual beating heart, is naturally assembled. This ...
Power: 1,000 W
Flow rate: 5 l/min
... x H): 665 x 298 x 247mm Tank capacity: approx. 4.5l Water column: 35m | 5l/min. Cooling capacity: 1200W (1l/min.) Package includes: - Water cooling unit - Connection cable inverter / water cooling ...
Power: 1,000 W
Flow rate: 4 l/min
Pressure: 3.5 bar
... Water cooling unit EVO Cool Water cooling unit for use with the EVO 200 WP or LITE controller and Tetrix 200 in conjunction with water-cooled welding tools.ols. - Standalone or continuous operation possible - Temperature-regulated ...
... helical coil design -Compact design minimizes cooling water needs -Easy maintenance and clean -High efficiency Applications -Suitable for liquid, gas or steam process -Cooling of pump seal water Technical ...
... distribution. - - Manual dampers for the adjustment of air inlet (fresh air) and outlet (wasted air). - - The cold source is a water battery - - Temperature control sensors for controlling the cold air. ...
Power: 480, 500 W
Maximum temperature: -10 °C - 35 °C
Flow rate: 3.5 l/min
... Product overview
- Ultra-compact water recirculating chiller designed for Minimum Film Forming Temperature (MFFT) instruments
- Cooling capacity 480 W (@17°C set point)
- Supplied ready-to-use,
Power: 8.61 kW - 29 kW
Flow rate: 1.36 m³/h - 4.42 m³/h
... with the need of cooling. Air Cooled Chillers are often an excellent process cooling option to water cooled chillers because they are closed loop systems. Closed loop systems have the ability to offer ...
Power: 3 W - 5 W
Flow rate: 100 l/min - 360 l/min
... PNWC air-cooled type water chiller is applicable for cooling moulds to reduce products molding cycle, also they are available in the cooling of equipment in order to maintain a normal temperature. Besides, they are suitable ...
Maximum temperature: 200 °C
... We can build chill rolls with diameter of 100 to 500 mm and width of 100 to 600 mm. Characteristics : - hard chrome plated , grind machined and mirror finishing polished roll - a double spiral oil circulation ensures a perfect homogeneity of ...
Flow rate: 10 l/min - 30 l/min
Pressure: 30 bar
... directions. TECHNICAL SPECIFICATIONS OF USE: • Hot fluid inlet max. temperature: 225°C • Cold fluid inlet min. temperature: -160°C Operating fluids: -Mineral oil -Synthetic oil -Emulsified water -Water - ...
Taon Hydraulik Komponenter ApS
Flow rate: 40 l/min - 120 l/min
Pressure: 30 bar
... directions. TECHNICAL SPECIFICATIONS OF USE: • Hot fluid inlet max. temperature: 225°C • Cold fluid inlet min. temperature: -160°C Operating fluids: -Mineral oil -Synthetic oil -Emulsified water -Water - ...
Taon Hydraulik Komponenter ApS
Flow rate: 30 l/min - 80 l/min
Pressure: 12 bar
They consist of smooth tubes with little diameter; this allows the best compromise between high thermic performance and low pressure drops.
Taon Hydraulik Komponenter ApS
Power: 14.5, 28.9, 42.7, 57.9 kW
Flow rate: 70, 110, 170, 230 l/min
... we supply water cooling chiller and air cooling chiller Water chiller machine is an important cooling machine in plastic extrusion line. Especially for large production ...
... The Cabinplant water chiller is of the Baudelot (falling film) type. Water flows uniformly from a common overhead distribution trough over both sides of the vertical stainless steel plates. The water ...
... Chillers, used in conjunction with the Closed Loop Filtration System, cool treated water and return it to the high-pressure pumps at the recommended temperature. The chillers utilize durable, welded hermetic-scroll compressors ...
Power: 18.5, 7, 4 kW
... Cooling circuit composed by: Copper piping. Complete of thermostatic expansion valve. Drier filter. Liquid passage indicator on the gas line. Liquid receiver. Pressure gauge for high and low pressure. Pressure ...
Pressure: 6 bar
... The Diebold FKS 04 S is a patented liquid cooler for cool down of shrink-fit chucks. Fast, contour-independent cooling, cleaning and rust protection. The housing of the FKS 04 S is filled with cooling water. The water ...
the best suppliers