Compact coolers

Power: 1,465 W
Maximum temperature: 0 °C - 80 °C
Pressure: 6.2 bar - 6.9 bar

Vortex A/C Coolers incorporate the most up-to-date features into Vortec’s line of highly reliable, cost-effective enclosure coolers. - Sleek, modern design - Noise reduction of 78%, when compared ...

Power: 733 W
Maximum temperature: 0 °C - 80 °C

Vortex A/C Coolers incorporate the most up-to-date features into Vortec’s line of highly reliable, cost effective enclosure coolers. - Sleek, modern design - Noise reduction of 78%, when compared ...

This is an Air knife cooling system manufactured by Exair Corporation which comes with a compact design that can generate great volumes of airflow. For this specific unit, it can be controlled using a ...

Power: 275 BTU/h - 2,800 BTU/h

... air - with no moving parts. The minimal Cabinet Cooler is a simple to utilize ventilation system that might be introduced in minutes through a standard electrical knockout. NEMA 12, 4 and 4x Cabinet Coolers ...

Power: 275 BTU/h - 5,600 BTU/h

... digital ETC (Electronic Temperature Control) is now available for Dual Cabinet Cooler® Systems installed on large or high heat load enclosures. An ETC Dual Cabinet Cooler system will keep electrical ...

We launched impingement freezing in the 1990’s because food processors were looking for a cost-effective alternative to cryogenic freezing of hamburger patties. Since then we have found numerous applications for this method of fast freezing. ...

Power: 1.4 W - 5.1 W
Maximum temperature: 13 °C - 30 °C
Flow rate: 0.75, 6.2 m³/h

WLA Compact New Liquid chiller Developed on the basis of the specific features of the WLA Compact predecessor, the WLA Compact NEW range has been significantly ...

Power: 380,000 W

gwk Gesellschaft Wärme Kältetechnik mbH has advanced the continuous development and modernisation of its range of compact water chillers and adapted it to the changing market requirements in close cooperation ...

Power: 9 kW - 36 kW
Maximum temperature: 90 °C

With the decentralised solution, gwk adds a machine series that offers a high level of flexibility for numerous applications to its portfolio. The customer can individually and precisely set the ideal cooling water temperature for every ...

... WATER UNITS gwk chillers in the sklc series are air-cooled compact cold water units with integrated condenser gwk chillers in the skw series are water-cooled compact ...

Maximum temperature: -180 °C - 500 °C

... measurement and control •Highly X-ray transparent graphite dome for measurements under vacuum, in air and other gases Compact design •Smart and variable sample fixing allows reflectivity measurements •Low weight ...

Power: 220, 180 W
Maximum temperature: 10 °C - 30 °C

JULABO flow-through coolers are the perfect complement to open bath circulators, immersion circulators and bridge-mounted circulators extending their temperature range to below ambient temperature. They offer a small ...

Power: 250, 200, 40 W
Maximum temperature: -20 °C - 30 °C

JULABO immersion coolers are primarily employed for countercooling open bath circulators to ambient temperature or below as well as for rapidly cooling liquids. JULABO immersion coolers have a small ...

Power: 30, 450, 360, 140 W
Maximum temperature: -40 °C - 30 °C

JULABO immersion coolers are primarily employed for countercooling open bath circulators to ambient temperature or below as well as for rapidly cooling liquids. JULABO immersion coolers have a small ...

Power: 40 W
Maximum temperature: 50 °C
Pressure: 10 bar

... gas cooler is used to lower the dew point of humid sample gas to avoid condensation in the analyzers. An extremely stable and low gas dew point avoids water vapor cross-sensitivity and volumetric errors. Overview Integrated ...

Power: 0.28 kW
Maximum temperature: 4 °C - 70 °C
Flow rate: 1.7 l/min

Ultra-compact, easy to handle and versatile – the new Piccolo chiller convinces entirely with state-of-the-art thermoelectric Peltier technology. This technology enables accurate and rapid heating or ...

Maximum temperature: -45 °C - 100 °C

... tasks which demand uninterrupted cooling. The immersion cooler is embedded in a compact housing that is made from high grade stainless steel, and is fitted with carrying grips. With its relatively small ...

Maximum temperature: -50 °C - 50 °C

... replacement of dry ice. For many applications immersion coolers are also an environmentally friendly alternative to mains water cooling. The TC immersion coolers are suitable for unsupervised use, for ...

... Transfer now offers a line of frac pumper cooling modules in a cube configuration for applications that require a lighter, more compact cooling package than our standard horizontal units. These modules are made with ...

Power Converter Coolers API Heat Transfer power converter coolers are a line of our Airtech Fan-Cooled Heat Exchangers, ideally suited for the cooling of wind turbine power conversion equipment. Our ...

Water Cooled Charge Air Coolers Custom designed in round shell and tube, or square engine and remote mounted fin designs, our high performance water cooled charge air coolers utilize extended surface ...

Power: 6,000, 16,400 W
Maximum temperature: -5 °C - 45 °C

SCI immersion coil chillers were developed to maintain temperature of contaminated fluids. This cooling solution does not require any pump and prevent the clogging risks from the heat exchanger. Compatible with water, ...

Power: 7,500, 8,500 W
Maximum temperature: 10 °C - 40 °C
Flow rate: 5 l/min - 33 l/min

End line chillers ECH (H) have been developed to cool industrial process or machine from an existing cold water loop supply. Compacts regarding floor occupation, they can also be wall mounted. Simple, ...

Power: 750 W - 3,800 W
Maximum temperature: 20 °C - 55 °C

The KR series is manufactured by Eurodifroid, and is an air chiller that is highly intended for closed circuit cooling the air of cabinet, which is available with pressure to guarantee a great mixture in cabinet. It has ...

Power: 550 W
Maximum temperature: 1 °C
Flow rate: 30 l/h

... model is a compact, easy-to-use water cooler with gravitational pouring, ideal for small mixing operations or a starter installation. The “COMPT’O” water meter can be used to view the ...

Power: 700 W
Maximum temperature: 1 °C
Flow rate: 40 l/h

The OPTIMUM 360 water cooler is SOREMA’s standard product, ideal for gravitational pouring use, with the “COMPT’O” water meter as an optional extra, for viewing the volume of water sent to the mixing trough. Output ...

Power: 0 kW - 10 kW
Maximum temperature: 40 °C
Flow rate: 0 l/min - 190 l/min

Hydrive Series Hydraulic Cooler The Mouvex® Hydrive Series Hydraulic Cooler is used on hydraulic drives for pumps and compressors, and integrates into three functions: oil tank, oil cooler ...

Power: 300 W
Maximum temperature: 2 °C - 45 °C
Flow rate: 0.8 m³/h

TCube mini 270 watts of Cooling Capacity in an Ultra Compact size Built upon the legacy of UC160-190 Same 5” x 7.5” footprint with 40-60% more cooling capacity: 270 watts Weighs less than 10 lbs ...

Power: 265 W - 300 W
Maximum temperature: 2 °C - 45 °C
Flow rate: 0 l/min - 3.5 l/min

AIR COOLED RACKMOUNT CHILLERS TRack edge Low cost rackmount thermoelectric chiller for lasers, optics, analytical equipment and life sciences A new product family optimized for low cost and high ...

Power: 1,200, 2,000 W
Maximum temperature: -10 °C - 80 °C
Flow rate: 0 l/min - 20 l/min

SEMICONDUCTOR CHILLERS ThermoRack 1801 Higher capacity rackmount chiller for Plasma Etch and other Semi Applications 1,800 watts of cooling capacity – 50% more capacity than ThermoRack 1201 in the same ...

... offical approvals and certifications allow us to design and manufacture closed circuit coolers for many and various applications. Our standard range of closed circuit cooler models is designed to satisfy ...

Power: 250 W
Flow rate: 6,000 m³/h
Pressure: 57 Pa

It is an adiabatic cooling system that can reduce the air temperature in small spaces. It fits for different applications and fields. It is an environmentally friendly solution and has low consumption ...

The Fryka circulating coolers are generally used in places where cooling systems were otherwise operated with industrial water. The DLK circulating coolers can be used as either a closed ...

Power: 590, 1,090, 1,050, 1,650 W
Maximum temperature: -10 °C - 30 °C
Flow rate: 6.6, 10, 13.3 l/min

... to the Refrind’s experience, it was possible to develop highly reliable chillers while ensuring excellent value for money. CONSTRUCTION package chiller with horizontal compact construction housing ...

Power: 1.3 W - 9.2 W
Maximum temperature: -10 °C - 30 °C
Flow rate: 13.3 l/min - 75 l/min

... INDUSTRIAL REFRIGERATORS COMPACT VERTICAL INDUSTRY automotive manifacturing plastic and rubber laboratory and analysis APPLICATION machine tools laser sources hydraulic and oleodynamic STANDARD FEATURES The ...

Power: 0.4 kW - 1.4 kW
Maximum temperature: 5 °C - 30 °C
Flow rate: 6.6, 10, 5 l/min

The compact RSN series chillers stand out by their accuracy, versatility and a vertical construction very compact. These chillers are able to guarantee high precision ...

Power: 2,000 W - 75,000 W
Pressure: 60 bar

... Oil Maximum Inlet Temperature: 70 °C Materials Cooler: Aluminum Fan Cover: Plastic Fan Blades: Plastic Hydraulic Oil Coolers with DC Motor • Bar & Plate brazed aluminum core. • Proven, compact ...

Maximum temperature: 343, 538, 593 °C
Flow rate: 3.5, 2 l/min
Pressure: 21 bar - 345 bar

The Sentry FLR sample cooler cools a sample from a process stream. It may seem simple, but it is a uniquely designed small tube in a shell heat exchanger. The sample cooler is compact ...

Maximum temperature: 260 °C - 593 °C
Flow rate: 2 l/min
Pressure: 55 bar - 345 bar

The Sentry FSR sample cooler cools a sample from a process stream. It may seem simple, but it is a uniquely designed small tube in a shell heat exchanger. The sample cooler is compact ...

Maximum temperature: 343, 538, 593 °C
Flow rate: 5, 2 l/min
Pressure: 21, 31, 138, 345, 234 bar

The Sentry FXR sample cooler cools a sample from a process stream. It may seem simple, but it is a uniquely designed small tube in a shell heat exchanger. The sample cooler is compact ...

Power: 70 kW - 1,640 kW
Maximum temperature: -30 °C - 75 °C

... heat exchanger to improve heat exchange efficiency; The air-cooled unit can be installed flexibly, saving room space; Compact structure, proper layout, easy to maintain; Microcomputer control, real-time detection[1] ...

Power: 221 kW - 2,494 kW
Maximum temperature: 7 °C - 37 °C

... vertical fully enclosed, vertical semi-enclosed, horizontal semi-enclosed compressor Evaporator: Flooded, falling film evaporator Power distribution recommendation： 300—1200RT：380V； 1300—1500RT：380V or 3KV/6KV/10KV 1600—2000RT：3KV/6KV/10KV ...

Power: 30 W
Maximum temperature: -10 °C - 60 °C

... -friendly with thermoelectric cooling elements, without liquid refrigerant - Separate inner and outer air cycles - Small dimensions, function in every position

Power: 50 W
Maximum temperature: -10 °C - 60 °C

... -friendly with thermoelectric cooling elements, without liquid refrigerant - Separate inner and outer air cycles - Small dimensions, function in every position

Power: 75 W
Maximum temperature: -10 °C - 60 °C

... -friendly with thermoelectric cooling elements, without liquid refrigerant - Separate inner and outer air cycles - Small dimensions, function in every position