|
|
|
|
|
|
C.L.M. produces aluminium bridges with load capacities from 400 to 5,500 Kg, lengths up to 6 metres and widths up to 1.25 metres. The standard range comprises 2 versions, developed to offer 30 models. They all have stow-away or removable handrails.
Bridges are used mainly on construction sites, as safety equipment for passage over diggings and over gaps of all kinds (e.g. links between scaffolding structures, between buildings, etc.).
C.L.M. bridges comply with Italian Presidential Decree n. 164, since they have a parapet 1 metre high with midway rail and foot-barrier 20 cm high.
Common features of all bridges:
-Non-slip surface;
-Wheel-chair-friendly flush-fitting ends without steps;
-Safety side foot-barriers 240 mm high (compliant with Italian Decree 164 of the 7th January 1957);
-Stow-away handrails 1,000 mm high (compliant with Italian Presidential Decree n. 164 of the 7th January 1957);
-4 holes for fixing the base to the ground;
-Side handles to facilitate transport;
-Special sizes available on request.
|
|
VITAP - Vibration Isolated Table Top Platforms.
These lightweight platforms consist of a robust, powder coated metal enclosure with either three or four integrated low natural frequency BILZ rubber air springs FAEBI or the even lower natural frequency BILZ membrane air springs BiAir. Platforms are available with or without a levelling system; automatic or manual levelling systems are available. Standard platforms are supplied with a granite top which provides a polished surface with high mass and stiffness. These platforms are designed for a wide range of applications with loads from 1kg to 150kg. These include visual devices, light microscopes, microscopes with CCD camera, inspection microscopes, small surface and roundness testers, lab and measurement rooms as well as semiclean rooms. They are also well suited for portable use.
|
|
Floor and sub-floor platforms are modular solutions to the problem
of supporting vibration-sensitive, large, floor-mounted equipment
or semiconductor equipment in a raised-floor, cleanroom environment.
|
|
The Combisafe Site Stairway has been designed and tested to meet the access performance requirements within the European Standard EN 12811 - Temporary Works Equipment - performance requirements and general design.
- Available in six lengths
- Can be joined and supported to offer a single run climb height of 7.5m
- There is a double handrail on both sides, which automatically adjusts to the correct height
- Automatic locking mechanism is engaged when the stairway is at the correct angle
|
|
The effective system which avoids the risks of fall.
The Barrier lock ensures the staff safety and the perenniality of your materials in the zone of demounting pallets on the floor and with rez of roadway.
Exist in several dimensions:
Heights: 2070 - 2400 - 2650 mm
Depth: 1550 mm
Lengths: 1700 - 2100 - 2500 - 3100 mm
All our barriers locks are in conformity with the criteria of CPAM the Rhone-Alps.
Standard completion: YELLOW RAL 1018
|
|
This device of barrier in full safety allows the loading of pallets on the mezzanines.
We carry out all dimensions compared to your needs
|
|
|
The principle of the barrier lock is to ensure the continuity of the railings around the zones of demounting. The operators work thus in full safety. On mezzanine or punt forms, handling in edge of vacuum, by means of a lifting truck, incites the operators to use retractable railings or simple chains. The barrier of the type RB is designed for the working stations having less constraints at the level of the environment.
|
|
The PODIUM UNIT FOR LIFT SHAFT includes/understands:
A cast solid framework Of the extensible cross-pieces Of the slides of extension postpones folding and adjustable mountings in height Two beams of safety extensible in length retained by chains a railing partly low a plywood ép flooring. 30 mm
|
|
Footbridges of protection for fragile roofs
They are aluminum footbridges intended to make safe the advance on surfaces fragile or slipping (asbestos cement, vat steel etc)
Whatever the length D " a SECURITOIT®, its design enables him to resist time, corrosion, and the deformations. Reinforced over all its length, it remains rigid and does not come into contact with the roof.
The support of footbridge makes it possible to fix it without boring the cover, but by using the hooks of roofs already existing. The SECURITOIT® are united one with the other to cover more important lengths.
|
|
Quite newly launched is the ALTRAD plettac assco staging and grandstand system. With stationary references i. e. in Silverstone, UK; Riesa, Germany; Nürnberg, Germany and many mobile applications in Europe.
The base construction is made of plettac assco modular scaffold. The upper construction is easy and logical to be erected. A safe and economical product not just to increase the utility of existing scaffold.
|
|
ADVANTAGES
• Hot dip galvanised steel : high fire resistance. Alluminium alloy on request.
• Available, delivery in kit form with bolting nuts and assembly instructions.
• Easy installation with usual tools.
• Non agressive and grit-top rung.
• Meet to NFE 85.010 requirements.
• Full compatibility with System T units.
|
|
|
Lifts: DICTATOR provides bespoke lifts. Whether you choose the Homelift DHM300 in accordance with the machine standard or the DHE lift in accordance with EN 81-2 standard: both lifts are manufactured individually and take full advantage of the given space. They are particularly suitable for installation into existing buildings as they require minimal pit and headroom. In case there exists no lift shaft, the DICTATOR lift shaft system presents the ideal solution.
|
|
|
The setting in safety of the operators and the speakers on the sites of production is an extreme priority. Within the framework of transfer operations of products, operations of loading/unloading, or for the agro-alimentary sector, at the time of operations of taking away, many of these interventions are carried out partly high cisterns or tanks. TECMECA-PACQUET with thought and studied for your installations a line of goods allowing you to ensure your operators and various intervening, a guarantee of maximum safety at the time of the operations of discharge, potting or taking away, just as easily combining the aspect put in safety, that the ergonomic aspect and ease of operation
|
|
Adaptable to all the configurations: practice with esthetics
Standards NF 14122-3 and NFP 01.012
In version:
- Access machines
- And receiving staircase of public (ERP)
Silt metal
Staircase ERP (receiving Establishment of the public): wood steps
Staircases with stage: Floor to 4 m and more
Staircase access machines
|
|
|
Modular metallic stairs system TOLAKIT range . Each custom made unit is delivered from stock in kit form. Any design or engineering time is necessary, we deliver drawings, assy instructions and packing list.
|
|
|
|
|
|
XLS
The platforms enable you to double the surface of your buildings and as well as possible to use surfaces of work and storage of your buildings.
True industrial floors answering the most severe schedules of conditions, we adapt our supplies to your requirements: range going to 8 ml, charges going up to 1 ton with the m ².
Principal beams:
- Profiles in IPE following French Standards, hot rolled-iron products, covered with a anti-rust gray painting (ral. 7012).
- Profiles C+ type, cold rolled-iron products, completion to sendzimir
The maximum range between columns is of 9.600 mm (Function of the load).
Cross-pieces:
- C+ Profiles laminated steel or Sigma+ cold to sendzimir (coated with zinc)
- Carried up to 6500 mm and load up to 1500 kg per square meter are available.
Floor:
For coverings, one can, inter alia, to make use of panels in agglomerate high density (780 kg/m3), thickness 30 or 38 mm, envisaged with the rough lower face or white melamine and the higher face rough or covered with an anti-wear matter.
|
|
Platform of storage
Platform in hot profiles. the profiles strong thickness make it possible to respect the standards of CM 66 only reference in the steel construction. each assembly is calculated specifically.
The containtes thus calculated and the design enable us to deliver perfectly stable and rigid mezzanines without pilot wheels where struts. With ranges of 14meters where loads of 2 tons per m ² ERIMEC is distinguished from all the other manufacturers.
|
|
Building additional storage space represents a high cost; it's better and cheaper to make the most of your existing buildings.
Feralco platforms assure the profitability of your investment, thanks to:
- a cost-effective solution
- a fully versatile module-based range with capacity from 350 kg to 1,500 kg/m²
- optimisation of profiles thanks to calculation software and integrated manufacture
|
|
With the Unideck storage platforms, Galler is on a successful way to become the market leader. Used as intermediate floor or multilevel installation, the Unideck platform provides a valuable additional floor, e.g. as storage floor or commissioning floor.
The Galler Unideck platforms are so successful because even with high load-bearings the construction remains light and variable and therefore is very economical.
Each single system component has been developped customer-orientated in practice and corresponds to the latest state of the art of international platform technology.
The single-floor commissioning and storage platform is used as pre-area of a high-bay rack. Valuable space saving for the intermediate storage and the supply of the bulky and unwieldy warehouse articles.
|
|
MECA Mezzanine Floor: All advantages
The best space solution
Complete, flexible and economical
The installation of a mezzanine floor is the most cost-effective solution to make the most of the space in a warehouse.
They increase the space by taking advantage of the height of the building creating working areas, offices, storage areas, filing space, etc.
• They double or treble the useful surface of the premises
• Without bureaucratic paperwork
• Quick, neat and easy assembly
• Modular system: Enlargeable, detachable and movable
• Adaptable to other types of racking systems
|
|
Mezzanine floors take maximum advantage of the height of premises, doubling or tripling the surface area and enabling it to be fitted out as a storage area, changing room, or offices, etc.
The installation of a mezzanine is an ideal solution to maximise the space available by taking advantage of the height of the building.
Mezzanine floors are totally dismountable and re-usable, and their structure, dimensions and location are easily modified.
Advantages:
Quick to assemble, clean and easy.
Multiplies surface space in industrial premises.
Adaptable to the specific needs of the client, thanks to the great variety of sizes available, types of floors, construction systems, etc.
|
|
My establishment receives from the public: I must take into account certain forced. The Isoplan platform ensures you an installation approved in the respect of the standards and safety.
- Adaptable to all the configurations.
- Arrow reduced to 1/500ème of the range for an increased comfort.
- Exhaust of smoke envisaged in the event of fire
- Respect of the minimal distances until the emergency exits
- Equipment approved and adapted to the PMR (people with reduced mobility): railing and staircases ERP according to standard NF P 01-012, conditions of loads defined by standard NF P 06-001
- Certified ISO9001
- Light Framework - Modularity - Note of calculation included/understood - Broad choice of color
- Total Service (electricity, false ceilings, floor covering,...)
Structure identical to the platform of storage
|
|
Extra space can be gained within a builging by utilising the head room available.
A PROVOST mezzanine floor can free space on the ground, doubling or even tripling available floor space.
|
|
Our mezzanines are entirely carried out in hot profile what guaranteed a very great rigidity and makes it possible not to be penalized by a multitude of posts or pilot wheels.
Study with the installation, we can propose to you solutions with ranges of +de 12 M and loads from 250 to 2000 kg m ². All our installations are carried out on computer program, which guarantees the best quality ratio/price (according to bases for calculation referring in the calculation of the metal structures)
Realization with your dimensions at the price of the standard.
|
|
DUWIC's platforms enable you to double the storage surface area in your warehouses. They are modular as they can be adapted to suit your needs.
Made from very high-resistance cold metal section metal, these are real platforms on solid posts.
Our design office assesses and determines the most appropriate solution depending on your limitations (fixed or rolling loads, passageways under the structure, etc)
DUWIC's palette safety augmentation system (SAS) ensures greater safety for your handling of palettes on platforms.
Optimizes your buildings' space
Adapts to your premises
Large loads
Tailored assessment
Complies with Eurocode 3
Design approved by standards monitoring agencies
Free standing platforms
Multi-levels
Platform for offices
|
|
Equipto Mezzanines - We design our mezzanines to fit your space, our mezzanines are designed for you!
Double or even triple your floor space with an Equipto pre-fabricated mezzanine. An Equipto mezzanine solves your space problems, and creates additional space at a fraction of the cost of an addition or new building. Our mezzanines offer rugged elevated floors, walkways and stairways and add valuable space where its needed.
Because of our mezzanines modular design, Equipto mezzanines are economical, quickly installed and can even be re-configured or added to as your requirements change.
Our mezzanines are designed to integrate with other Equipto products to provide a one-source space savings that are custom tailored for your individual application. Add an Equipto V-Grip steel shelving units or Equipto's high density mobile shelving units to your Mezzanine to complete your storage solution.
|
|
|
Completely modular, Stanley® Vidmar® mezzanine systems can be reconfigured as often as necessary-even when fully loaded! Constructed to the same super-tough standard as the rest of Stanley Vidmar's storage components, mezzanine systems are available as two convenient modular systems-the MaxiMezz™ System and the MiniMezz™ System!
|
|
|
|
|
|
Wildeck® structural steel mezzanines are your best solution to fully utilize existing overhead space so you can operate more efficiently and profitably. You can gain valuable working, office, storage, or manufacturing areas at a fraction of the cost of new construction and often with a significant tax depreciation advantage. Wildeck can help you put this space to work fast, with minimal interruption to your working floor area.
Quality Wildeck mezzanines meet stringent industry standards and specified national, state, and local codes and are specifically designed to meet your size, load and span requirements. Our expertise and extensive manufacturing capability ensures that you receive more value today and for years to come.
Wildeck mezzanine system advantages:
- Quality manufactured to your specification requirements
- Designed for easy, fast assembly
- Specially engineered steel components quickly bolt together to form a strong and secure unitized structure
- Heavy-duty 5" x 5" x 3/16" thick columns are a standard minimum (larger sizes available), along with 12" x 12" x 3/4" thick baseplates, providing rigid support while eliminating obstructing bracing
|
|
A diverse modular system designed to make full use of available headroom with minimum demands on floor area. Reduce space costs!
ELVEDI standard mezzanine system is an entire range of add-on components to suit almost all requirements to solve your particular storage problem effectively and at minimum cost.
|
|
|
|
Platforms, Stairs, Ladders
