|
|
|
This revolutionary T7 ride-on scrubber-dryer is designed around Tennant FaST-technology. The T7 micro-rider uses water so sparingly, a little more than one tablespoon of water to clean 1 m2. With increased manoeuvrability and simple controls the T7 boosts your productivity. It offers you superb cleaning and excellent water pick-up while reducing operator fatigue considerably. Now available with disc or cylindrical scrubhead.
|
|
Man on board scrubber dryer 700 STILE.
Floor Area Cleans m2/h 3800
Cleaning Width mm 700
Squeegee Width mm 1030
Brush ø / mm 2 x 350
Brush Motor W / V 2x375 / 24 S1
Vacuum Motor / Vacuum Power W / V mm / H2O 1x480 / 24 / 1200
Drive Motor W / V 1x500 / 24
Brush Pression Kg 50 ÷ 90
Solution / Recovery Tanks l 125
Net Weight Kg 265
Gross Weight Kg 580
Autonomy A / h 425 / 4,5
Dimensions mm 1570x750x1450
|
|
Technical Data
- Scrubbing width [mm] 850
- Squeegee width [mm] 1010
- No. of brushes 2 (disc)
- Productivity [sqm/h] 5525
- Solution tank capacity [l] 110
- Recovery tank capacity [l] 115
- Power installed 24V (4x6V)
- Max speed [Km/h] 6,5
- Weight (net) [Kg] 231
- Dimensions (LxWxH) [mm] 1504x909x1201
|
|
Man on board scrubber dryer 1000 MAGNUM.
Floor Area Cleans m2/h 5500
Cleaning Width mm 1000
Squeegee Width mm 1150
Brush ø / mm 2x500
Brush Motor W / V 1x1800/ 36 S1
Vacuum Motor / Vacuum Power W / V mm / H2O 2x600 / 36 / 1500
Drive Motor W / V 1x600 / 36
Brush Pression Kg 50÷100
Solution / Recovery Tanks l 190
Net Weight Kg 400
Gross Weight Kg 850
Autonomy A / h 425 / 4
Dimensions mm
1800x1050x1450
|
|
|
|
|
|
Series industrial man to earth:
a complete range that understands models with models fed to battery electric cable. To use him in every sector for the cleaning with water and cleansers of any type of flooring in every sector. These cars wash and they contemporarily dry also guaranteeing an optimal cleaning in presence of obstinate dirts.
Series industrial man on board:
a complete range that understands models wash-dries and wash-dries sweepers. On purpose study for big surfaces and for serious jobs what alimentary establishments, hypermarkets, industries. They differentiates for footstep of useful cleaning from 600 to 1500 mms from which then the dimensions of the reservoirs and the pressure cleaning of the brushes depend on the floor. Numerous versions allow to have proper available cars for any demand. Reliability, constructive quality and safety, are at the base of our products. Possibility of rental also full rent and used guaranteed.
Series professional seeds:
we prepare to catalog a lot of solutions for small and middle environments up to 500 mqs. They are a lot of efficient and strong practices. Proper for laboratories, shops, villas, small sheds.
|
|
Floor Area Cleans m2/h 900
Cleaning Width mm 350
Squeegee Width mm 500
Brush ø / mm 1 x 350
Brush Motor W / V 1x750 / 220 S1
Vacuum Motor / Vacuum Power W / V mm / H2O 1x850 / 220 / 1950
Drive Motor W / V Semiautomatic
Brush Pression Kg 25
Solution / Recovery Tanks l 13 / 16
Net Weight Kg 38
Gross Weight Kg 51
Autonomy A / h ---
Dimensions mm 620x500x400
|
|
The single disc machines from Nilfisk-Advance offer efficient scrubbing, wet and dry stripping, polishing and spray cleaning %u2013 for longer lasting and better looking hard floors. We have models that are ideal for small and confined areas to the workhorses for stripping and scrubbing in harsh industrial areas. Or the 545, with savings of up to 60% on restoration of floor coatings.
Our single disc machines and burnishers are for use in all kinds of industries and institutions.
Some examples:
Day-care institutions
Hospitals
Hotels
Supermarkets
Shopping centres
Airports
Cafeterias and canteens
Warehouses
Auto workshops
Iron and metal workshops
An extensive range of special accessories is available for improved efficiency and better working environment.
|
|
Floorcare - NuSpeed NR1500H
Hi-power(1500W) compact machine, available in two speed options: S (slow) – 150rpm & H (high) – 300rpm. Deck / brush size – 450mm, weight - 40kg with optional 10kg if required. The ‘H’ model is for polishing applications and is supplied with a Flexi Pad Drive system as standard.
|
|
Mark is the range of RCM walk behind scrubber/driers with nine models in nineteen versions suitable for cleaning small to medium sized areas.
All RCM scrubber/driers are made on a simple but robust chassis making them tough and durable both in transit and when working. They have large polythene tanks for their size. The technical choices throughout the range ensures easy, efficient use by the operator.
|
|
|
|
|
|
The DULEVO 200 and 5000 Hydro are machines particularly studied for high pressure washing and disinfecting of road surfaces and dealing with the many problems encountered in towns, city centres and large industrial complexes where hygiene is required.
The compact dimensions of these machines, plus a special four wheel steering system make these machines unique in their category, both in working autonomy as in manoeuvrability
Washing is made through a front spray bar positioned under the front part of the cabin, this can be adjusted hydraulically in angle of incidence, side angle, ground height.
The spray bar is built in stainless steel and is equipped with eleven vertical cone type spray units for frontal work and by two side units for working both on the left or right hand side of the machine.
Water is sent to the spray bar through a high water flow volumetric piston pump with pressure that can be regulated by a valve easily accessible and adjustable.
The water is withdrawn and filtered through a cartridge filter (with easy access for maintenance) from a stainless steel water tank placed on the rear part of the machine.
|
|
Washerwoman JUNGOJET is included in the category of the vehicles of maintenance of the narrow roads. She is especially conceived for the cleaning of the pavements, of the pedestrian precincts and gutters.
Width of the vehicle: 1,13m
Height of the vehicle: 1,90m according to the tires
Maximum speed: 25 to 40 km/h according to the countries
- The articulated Vehicle most compact of its category
- Payload 1800 kg according to equipment
- 4 suspended wheels and suspended cabin
- Two-seater, led on the right
- Fast Change of tools
- Exceptional Visibility on the spray bar
- 4 permanent driving wheels
- Robust and ecological
- Adapted to the underground car parks
- Transforms itself into a few minutes out of sweeper, in the vehicle of watering, tilting bucket of transport, the vehicle of snow clearance and suction mower
ADVANTAGES OF THE WASHERWOMAN:
- A new design of the spray bar, simpler and more robust.
- 1000 Liters/pressure up to 200 bar
- Width of passage 1.13 m
|
|
|
The most compact and ergonomic machines in their class, designed for heavy duty applications. Stainless steel tanks, cast alloy brush heads and simple electronics guarantee reliability under the harshest of conditions. Simple operation and easy daily maintenance. Created for cleaning in industrial areas these machines are suitable for floor surfaces between 1.200 m² and 10.200 m².
|
|
Technical data
- Cleaning system selected Brush/pad Microfibre
- Scrubbing width [mm] 500
- Brush/pad speed rotation [g/m] 200 600
- Solution tank capacity [l] 40
- Recovery tank capacity [l] 50
- Average water consumption [l/min] 1,2 0,15
- Suerface cleaned/one full water tank [mq] 400 2000
- Power supply with Energy Saver 24V
- Max speed [Km/h] 4,5
- Dimensions (LxWxH) [mm] 1230x516x960
|
|
|
Hako offers you the right alternative for any application. Scrubber-driers: pedestrian operated or ride-on, with working widths of 35 - 130 cm, tank capacities of 20 - 380 litres, mains-operated or with optimally suited battery systems with different running times.
|
|
|
|
|
|
Wouldn’t it be nice to be able to utilize the cleaning efficiency and productivity of a scrubber/dryer in smaller spaces?
Well now you can, thanks to the SCRUBTEC 233, the latest addition to the Nilfisk-ALTO portfolio of value adding floor cleaning equipment. The SCRUBTEC 233 is the smallest unit in the range. However, despite its compact profile – 46 cm high, 39 cm wide and 66 cm long – the SCRUBTEC 233 offers the highest brush pressure within its class, enabling excellent cleaning performance.
The foldable and adjustable handle makes it very easy to transport and with additional accessories this multipurpose machine can also be used as a carpet extractor.
Designed to scrub and dry floors in congested and space-restricted areas, this unit is intended for use in small supermarkets, kitchens, canteens, offices and educational buildings health care facilities, sport centers and anywhere that normally can only be cleaned by a single-disc machine and vacuum cleaner.
The SCRUBTEC 233 features spring-activated dual brushes/pads with a floor pressure of up to 18 kg to ensure cleaning efficiency. Furthermore double squeegees enable vacuuming and scrubbing whilst moving in either direction, backwards or forwards. The machine weighs just 22 kg and can easily be transported from one job site to another. The productivity rate is said to be outstanding!
|
|
The CA 331 is the latest addition to the Nilfisk portfolio of scrub-ber/dryers, and is the smallest unit in the range. However, despite
its compact profile – 37 cm high, 39 cm wide and 66 cm long – the
Nilfisk CA 331 offers the highest brush pressure within its class,
enabling excellent cleaning performance.
Designed to scrub and dry floors in congested and space-restricted areas, this unit is intended for use in canteens, restaurants, hotels, schools, kitchens, retail areas, and anywhere that normally can only be cleaned by a single-disc machine and vacuum cleaner.
The Nilfisk CA 331 features spring-activated dual brushes/pads with a floor pressure of up to 15 kg to ensure cleaning efficiency. Furthermore double squeegees enable vacuuming to take place whilst moving in either direction, backwards or forwards. The machine weighs just 22 kg and can easily be transported from one job site to another. The productivity rate is said to be outstanding.
|
|
|
|
|
|
Accompanied industrial Autolaveuse Pharaon - Isis 1st
Autolaveuse accompanied with a width by work by 450mm - Width nozzle: 740mm - Number of revolutions: 120tr/min - This autolaveuse industrial has a tank clean water: 30L and of a dirty tank water: 30L - Dimensions: 1150x1030x850 mm - Tare weight: 120Kgs - Autolaveuse with a theoretical yield of 2000m ² /h -
Engine brushes: 24V/400 W - Engine aspiration: 24V/400 W - Batteries: 2x12 - Autonomy: 2:00 - Traction: Brush
The autolaveuse ISIS 1st is a mono washerwoman brushes compact but it is also true aulaveuse industrial accompanied.
With a surpuissant system of aspiration of staged turbines multi, this autolaveuse guarantee a surprising result of quality.
Handy, robust, ergonomic and economic, being able to thread everywhere. Very powerful on released or encumbered surfaces.
Autolaveuse industrial ISIS 1st is provided with a frame profiled out of square steel of strong section formed hot protected by casings. Its resistant structure légèreet, do not rust, resist the corrosive substances and especially the shocks...
Practical and Compact
Its swivelling head engine makes it possible to raise the brush to facilitate of it the change and the displacement of a point to another thanks to the wheels of support of the head. This system guaranteed an optimal hygiene and avoids the crushing of the brush during storage.
Powerful and Effective
The Engine-Brush-Scraper unit restores you clean and dry grounds, even under the most difficult conditions.
Handy and Comfortable
Its tiller of order ergonomic, folding stool and adjustable offers a great freedom of déplacmement to you.
|
|
|
Maximum cleaning width 46 cm - brush head with single disc brush, available in battery and cable version, semi-automatic traction
|
|
|
The T5 walk-behind scrubbing machine fits in the T-series scrubber-dryers which are designed around Tennant FaST-technology. Due to this unique technology it only needs a little more than 1 tablespoon of water to clean 1 m2. The T5 is equipped with cleanable tanks, one-touch controls, unmatched manoeuvrability, long-lasting battery packs and with the addition of the cylindrical scrub head prepared for cleaning in traditional industrial markets.
|
|
Compact, Low-profile Cylindrical Scrubber
• Scrub small and tight spaces
with the T1’s compact, best-in-class
design
• Reduce risk of slip and fall accidents in
narrow, congested spaces with excellent
water recovery – even in forward and
reverse maneuvers
• Improve environmental health by reducing
bacteria growth with easy-to-clean-and sanitize
Hygenic tanks
|
|
The T3 walk-behind scrubber-dryer is designed around Tennant FaST-technology. Due to this unique technology it uses water so sparingly, a
little more than 1 tablespoon of water is needed to clean 1 m2. It will keep you going longer than ever before without refill. With its new cleanable
tanks, the T3 sets a new standard in corporate hygiene. Easy, intuitive controls, unmatched manoeuvrability and long-lasting battery packs were added to keep you going longer without operator fatigue.
|
|
T2 - Compact 43 cm Scrubber-Dryer
• Experience Tennant performance while
maintaining your budget
• Clean small, congested spaces easily
• Deliver superior cleaning and floor safety
• Lower fatigue and increase operator
satisfaction with low push force
pad-assistance
|
|
Mazzoni scrubber-dryers are suitable for use in a large variety of applications due to the advanced design and quality construction.
Single brush model is available in the electric version with cable (60 Hz on request) and in batteries with and without traction. Double brush model is available in batteries version with traction only.
The squeegee design ensures excellent water collection and features a built-in trap for dirt. The large capacity tanks are easy to clean.
|
|
Cable scrubber dryer 350E MINISPEED.
Floor Area Cleans m2/h 900
Cleaning Width mm 350
Squeegee Width mm 500
Brush ø / mm 1 x 350
Brush Motor W / V 1x750 / 220 S1
Vacuum Motor / Vacuum Power W / V mm / H2O
1x850 / 220 / 1950
Drive Motor W / V Semiautomatic
Brush Pression Kg 25
Solution / Recovery Tanks l 13 / 16
Net Weight Kg 38
Gross Weight Kg 51
Autonomy A / h ---
Dimensions mm 620x500x400
|
|
|
Walk-behind scrubber dryers (with drive) – strong and flexible for small surfaces.Clean small surfaces quickly: These scrubber dryers ensure radiant cleanliness between customer visists. Even as of 100 m² they are more efficient than wet mopping.
|
|
Floorcare - Twintec Cable - TT3450T
Compact cable machine on full stainless-steel chassis. 30L capacity within the twin dirty water tanks. Heavy duty 450mm scrubbing head with 1000W motor. Full floating polyurethane floor nozzle and 1200W vacuum motor ensures floors are left clean and dry.
|
|
Technical Data
- Scrubbing width [mm] 678
- Squeegee width [mm] 1010
- No. of brushes 2 (disc)
- Productivity [sqm/h] 3051
- Solution tank capacity [l] 70
- Recovery tank capacity [l] 75
- Power installed 24V (2x12V)
- Max speed [Km/h] 4,5
- Weight (net) [Kg] 94,5
- Dimensions (LxWxH) [mm] 1220x748x960
|
|
500 HYGIENA
Main data:
automatic and oscillating brush flange
brush automatic stop when the machine is not oprating
electric floater
electrovalve only when the brush is rotating with water-flow regulation on the control panel
waste tank removable and easy to be accessed
automatic battery charger onboard
use only GEL batteries 2x12V 100 Ah
Floor Area Cleans m2/h 1800
Cleaning Width mm 500
Squeegee Width mm 850
Brush ø / mm 1 x 500
Brush Motor W / V 1x375 / 24 S1
Vacuum Motor / Vacuum Power W / V mm / H2O 1x550 / 24 / 1500
Drive Motor W / V 1x200 / 24
Brush Pression Kg 40
Solution / Recovery Tanks l 65
Net Weight Kg 100
Gross Weight Kg 230
Autonomy A / h 100 / 2,5
Dimensions mm 1300x550x1000
|
|
|
|
|
|
Floor scrubbers from SANTONI are manufactured with an eye on user comfort and a variety of floors that need to be cleaned. Whether it is an industry, office, hospital or a hotel, SANTONI's floor scrubbers are extremely useful and make the cleaning process a joy. Save on cost, labour and time.
Picture here shows a floor scrubber cum carpet shampoo model from SANTONI, called "MULTISCRUB" (because it is a multipurpose machine) which has been accepted by the commercial as well as industrial establishments with equal satisfaction. Cleaning contractors, who have reasonable level of business, find it a very rewarding possession as it gives high productivity and has a short pay-back period.
Some of its salient features are :
- Handle is adjustable at 12 locations - vertical for storage and other locations as per operator's height or as per the height available under a furniture item.
- The brush is latched or released automatically - no need to fix the brush with nuts and bolts, or by soiling hands.
- Sturdy gear drive - with 6 damping elements - for noise-free long life. No maintenance.
- Liquid flow control through a lever in the handle - no wastage of detergent or pools of excessive liquid on the floor.
- This machine can not only scrub the floors, it can scarify (removal of impacted oily/greasy muck from industrial floors), buff/polish the floors, as well as shampoo carpets.
|
|
|
Maximum cleaning width 68 or 80 cm - brush head with two disc brushes, battery powered with electronic traction.
|
|
|
|