- Metrology - Laboratory >
- Laboratory Equipment >
- Other laboratory equipment
Other laboratory equipment
Output: 1 kg/h - 50,000 kg/h
The Universal FNG mill is an impact grinder that has the key advantage of being fully adaptable. It can be equipped with different grinding tools (hammer plate, pin plate or blade plates) which are adjustable in relation to the product ...
Final grain size: 1 µm - 500 µm
Rotational speed: 12,000 rpm - 18,000 rpm
Output: 5 kg/h
The Universal Laboratory Mill (FNG00) is the smallest crushers of the FNG range. Manufactured in the mass and built steel stainless 316L welded mechanic, it is intended for the small installations of grinding in laboratory. FNG0000 was ...
Rotational speed: 18,000 rpm
Output: 50 kg/h
The R&D Grinding Unit FPX is a variant of the Forplexe's Universal Mill (FNG). Presenting the same characteristics as the FNG, he allows however the processing of more consequent batches than FNG0000 or BLX. This mobile grinding unit ...
The NDIR bundle -OH from Micro-Hybrid is a set of perfectly matched IR emitters and detectors for the analysis of methanol (CH4O / half structure formula: CH3OH) & ethanol (C2H5OH): a premium NAC infrared emitter with reflector of the ...
Micro-Hybrid Electronic GmbH
The NDIR bundle CO2 is a set of perfectly matching components for the gas analysis of carbon dioxide and offers research teams, institutes and laboratories the right solution for the demand of short term required IR components in small ...
Micro-Hybrid Electronic GmbH
The NDIR bundle medical gases is a test set of perfectly matched components for gas analysis in the medical environment. The bundle offers a selection of IR emitters and detectors for the measurement of common gases such as CO2, CO, N2O, ...
Micro-Hybrid Electronic GmbH
The Nitroxtec Deoxy (Nitrogen Purifi cation) unit provides a defi nitive solution to the need for high nitrogen purity. Thanks to this system, nitrogen gas of much higher purity such as 99.9999% (6.0) N2 (1 ppm O2) can be obtained and ...
Output: 60 kg/h - 110 kg/h
grinder CRICK-CROCK for toasted nuts (hazelnuts, peanuts, walnuts, almonds, etc.), nougat, crunchy, cookies and chocolate. The machine is composed of modules of rotary blades for the production of different grain size or powder and ...
Inside of the chambers CM f, it is possible to do cultivation in controlled environmental conditions (temperature, humidity and light), reducing the impact of the environmental variables, reducing the incident of contaminants agents like ...
Growth chamber without humidity with lights on the door - Vertical Airflow FIELDS OF APPLICATION Plant growth Seed germination Acclimation of plants Culture of plant cells and tissues Chemical industry Test which needs specific ...
FALC Instruments S.r.l.
Growth chamber without humidity with lights on the door - Vertical Airflow FIELDS OF APPLICATION Plant growth Seed germination Acclimation of plants Culture of plant cells and tissues Chemical industry Test which needs specific ...
FALC Instruments S.r.l.
Growth chamber without humidity with lights on the door - Vertical Airflow FIELDS OF APPLICATION Plant growth Seed germination Acclimation of plants Culture of plant cells and tissues Chemical industry Test which needs specific ...
FALC Instruments S.r.l.
The BioWizard 3 is a Class III safety cabinet which protects the operator and the environment from hazards in handling infected and other dangerous biological material. The cabinet separates the operator from the potentially infected ...
Kojair Tech Oy
The storage area of the drum holder can be adjusted for height and provides a place for setting down the filling container directly under the discharge of drum pumps. This prevents the danger of the liquid splashing while being poured ...
Bürkle
The Easy Scoop Series, manufactured by Buerkle®, is designed in a lighlight aluminium, bright-anodised material, used in scooping bulk of goods, with an immense precise weight. It ensures smooth and secured function due to its grip that ...
Bürkle
The bottle holder by Bürkle is designed to hold a bottle that has a diameter up to 88 mm. It has the ability to securely hold glass, metal or plastic bottles. Its arm can adjust its angle up to 90°. The bottle holder is a flexible sampling ...
Bürkle
Description: Easy mounting with all profiles. Heat resistant up to 180°C. Material: PA Color: Black Packaging Unit: 1 Piece
96-well polypropylene plates for simultaneous filtration of 96 samples Advantages of this high-throughput system: Economical by saving time and solvent Use of multi-channel pipettors facilitates liquid transfer steps Readily adaptable ...
MACHEREY-NAGEL
Flexible thermoreactor for sample preparation of photometrical determination of COD, total chrome, total phosphate, total nitrogen and TOC. Digestion is possible with three temperature ranges and three pre-programmed reaction times. Three ...
Purification Plants for the treatment of harmful fumes and waste water to ensure greater energy efficiency, respect for the environment and working safety. Monti Engineering has always cared about the environment and workers' safety, ...
New worktop in anti-corrosion polypropylene with anti-overflow surrounding edge, moulded as a single piece. New design with completely smooth surfaces and absolutely no joints or solders. Edges and corners rounded and accident-proofed. ...
PLASTIFER
New worktop in anti-corrosion polypropylene with anti-overflow surrounding edge, moulded as a single piece. New design with completely smooth surfaces and absolutely no joints or solders. Edges and corners rounded and accident-proofed. ...
PLASTIFER
New worktop in anti-corrosion polypropylene with anti-overflow surrounding edge, moulded as a single piece. New design with completely smooth surfaces and absolutely no joints or solders. Edges and corners rounded and accident-proofed. ...
PLASTIFER
Granulating. Drying. Coating. All-in-one. • Fluid bed and tablet coating in one machine • Very good process monitoring through glass components • Convenient operation via full graphic display • Easy cleaning due to tool-free disassembly • ...
DIOSNA Dierks & Söhne GmbH
Coater-System (Lab machine) The Lödige laboratory tablet coater has a modular design, so that integration of any components is customised according to the customer’s specific requirements. A dividable drum and a dividable nozzle ...
M131524 ADAPTER, #15 O-RING JOINT TO INNER JOINT From #15 O-ring joint to 24/40 inner joint
Synthware glass
M131605 ADAPTER, #15 O-RING JOINT TO SERRATED HOSE CONNECTION 12mm O.D. serrated hose connection Accessories: CC2815 #15 O-ring joint stainless steel clamp 12.45 R116 #116 Viton® O-ring 2.25
Synthware glass
Trap provides expanded volume for reactions that have a tendency to foam excessively. The inner vapor tube is sealed to the top of the trap to prevent entry into the condenser. Bottom Joint:24/40 Capacity (mL):250 Top Joint:29/42
Synthware glass
Simplicity in irrigation control Control of 96 blocks through 50 irrigation programs with 15 daily starts up. Easy and intuitive programming allows the user to avoid schedule problems such as valve overlaps. Automatic filters cleaning ...
ITC
Our range of USP class VI scoops are available in a range of sizes from 25ml to 1000ml. This premium scoop range is double bagged. A box liner is also used giving a third layer of protection. It is ideal for demanding applications such ...
Sampling Systems Ltd
Volume: 500 ml - 1,000 ml
Our range of class leading jugs are ideal for us in laboratory and production. The high quality PP construction gives great chemical resistance. These graduated jugs are supplied pre-sterilised so cleaning becomes a thing of the past. ...
Sampling Systems Ltd
Volume: 2,000 ml
The disposable Jug range is available both pre sterilised and non sterile. This avoids any cleaning and costly cleaning validation. Simply unwrap and use. The Jugs are made from pure HDPE that is both FDA and EC compliant for food and ...
Sampling Systems Ltd
AMP 50 belongs to automatic mounting press with the function of the water cooling system. It applies to all the hot mounting material plastic. After setting mounting parameters of the heating temperature, dwell time and loading pressure, ...
MMP22/30/45 is used to reshape irregular shape and size of metallographic sample which is difficult to hold so as to cut or polish the samples. Then to be tested and measured in metallographic photo or hardness test. This machine is ...
CAPEL-105M is a capillary electrophoresis system for fast and effective solutions for food industry, environmental applications, pharmaceutical and chemical industries, biochemistry and forensic science. High performance capillary ...
Lumex Instruments
Capel-115 is a portable capillary electrophoresis (CE) system intended for determination of a wide range of analytes in various types of samples, including water, soil, food, and fodders using main modes of separations available in capillary ...
Lumex Instruments
Capel-205 is a new generation capillary electrophoresis system with advanced options and design. Its main features are: Extended autosampler capacity up to 59 positions, allowing to provide overnight analyses Standard centrifuge-type ...
Lumex Instruments
• Easy The Bematek Laboratory CB colloid mill was developed for R&D purpose and the difficult task of scale-up in homogenizing and emulsifying applications. These mills have features that address factors such as ergonomics and flexibility ...
Clean room technology plays an increasingly important role in nearly all high-tech sectors. The Spetec FMS laminar flow module makes it possible to establish clean room conditions at a workstation with simple, cost-effective means. Suspended ...
Spetec GmbH
Volume: 10 ml - 5,000 ml
Straight and stable shape Featuring a traditional, griffin shape, the Azlon® low form griffin beaker is great for general laboratory use and is autoclavable at 121°C. • Complies with ISO 7056 • Traditional beaker shape • Ideal for ...
SciLabware Limited
Sample size: 30 mm - 50 mm
The new TEKNIPRESS PRO metallographic mounting press has a high speed mold heater with built-in water cooling coils. Built in hydraulic system. 1200 watt mold heater Arrangement to accommodate 1 1/2 "and 2" diameters. 1 1/4 "diameter ...
TECNIMETAL
Double Electrohydraulic Metallographic mounting Press. Automatic Hydraulic mounting press with dual cylinders Inter changeable moulds 1 1/4", 1 1/2" and 2" dia Heater 1600 Watts, Single Phase LCD Parameter Indicator Ideal for ...
TECNIMETAL
Metallographic mounting press TEKNIPRESS pro P Pneumatic operating system inter changeable moulds 1 1/4" and 1 1/2" Optional: Metric mould dimensions : 30 and 40 mm Manual water cooling system Digital Temperature Indicator and digital ...
TECNIMETAL
Rotational speed: 50 rpm - 6,000 rpm
Hammer grinding / Laboratory mill, dry sample preparation with CH-power cable, hammer grinding attachment, sieve 2.0 mm, tool set, rack for tubes with 12 intercepting tubes (230 V) Analysis or quality control requires finely ground ...
KINEMATICA AG
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining