|
|
FinishPro 42XP - 15 Gauge
Extreme work calls for extreme tools, and the FinishPro® 42XP is this tool! Replacing the work horse FinishPro® 41XP, the FinishPro 42XP has been redesigned with a new long life driver, new mainbody with improved durability, improved trigger ergonomics with reduced trigger reach. All backed by SENCO¹s NEW 5-Year Warranty.
Features:
Thumb Wheel Depth of Drive
Stretch Comfort Grip
No Mar Pad
Never-Lube
Magnesium Housing
Easy Clear Jam Clearing
360 Degree Adjustable Exhaust
|
|
3-1/2"Strip /Round-Head Nailer
- Equipped with the same output mechanism as the NR90AC2 that well reputed with its rapid driving and quick response, good balance
- Equipped with SINGLE ACTUATION / CONTACT ACTUATION
- High capacity rear-loading aluminum magazine
- Barbed nose for easy toe nailing
- Tool-less depth adjusting mechanism
- Rubber grip for comfortable handling
- Equipped with a dust filter in air inlet
- Equipped with a pushing lever stopper(idling ptotector)
- A FULL SEQUENTIAL ACTUATION MECHANISM KIT is also available as an option(Code No.884142)
|
|
Main advantages:
-Permanent operation monitoring of the 12 most important process steps., with LED indication
-Integrated mandrel sisposal through aspiration (as an extra on the GAV 6000)
-Built-in interface for remote control
Working Range:
Blind rivets from Ø 3 mm up to Ø 6 mm in Alu, copper and steel, and up to Ø 5 mm in stainless steel.
Shaft length up to 25 mm (standard head) and 27 mm (countersunk head).
Technical data:
Rivets per minute: 45 pieces
Max. pulling strength: 11.770 N (1200kp)
Total stroke: 20 mm
Operation pressure: 6 bar
Electric power requirement: 230V, 50Hz
Alternatively: 110V, 60Hz
Air pressure connection: 12,5 mm (1/2")
Length of supply tubing: 3,75 m
Protection class: IP 54
Air consumption per rivet with mandrel aspiration: 22,5 ltr
without mandrel aspiration: N/A
Weight: 100 kg
Weight of riveting gun: 1,8 kg
Continuous noise level: Lpa=78/82
Content of vibrating bowl - Dim./Pieces: 4x8F/1.700 - 5x12F/1.050
|
|
The RIV 610 is a riveting tool endowed with a blind rivets automatic feeding system.
This system operates through the nose allowing an extremely fast working cycle. This features eliminates the inconvenient external-loading-mechanism, increasing safety and reliability.
With the new RIV610, installation productivity is increased: compared to traditional riveting tools it saves about 50% time and costs, and this is due to the automatic loading of the blind-rivets in the gun.
Advantages offered by the product are a wide range of action thanks to the hoses connecting the gun to the main unit, an excellent integration with automated production lines and no need for skilled labour.
Each unit comes equipped for a single blind rivet diameter.
|
|
KMT rivet plants
Tumbling rivet plants for rotating indexing plates and workpiece carriers of transport systems
Tumbling rivet cells for rotating indexing plates and workpiece carriers of transport systems with and without coordinate oh system
TN 2000 over head
Special productions for overhead assembly
TN 750 with blank stand
Special productions for rotating indexing plate plants with Winkelgetriebe
|
|
Our Standard solution provides the basis for customised riveting applications.
2 or 4 indexing table positions
300 x 200 mm working range
Machine and riveting process control with freely selectable quality assesment logic
Highly cost-effective for small runs due to high-speed job changes
Change workholder. Standardised workpiece holders can easily be converted into customised holders
Insert matching riveting tool
Activate programme...
... and the machine is ready for the next run
|
|
|
|
|
|
RIVSET® Self-pierce Riveting Systems
The RIVSET® Self-pierce riveting systems for automated production consist of three systems, which are adapted for different production environments. Robot-guided handling of the component or of the setting tool and the integration into a complete installation or also manual operation can be implemented.
The RIVSET® MBF and MTF self-pierce riveting systems are basically identical in design; they only differ in terms of the type of rivet feed: The RIVSET® MBF processes loose self-pierce rivets; for the RIVSET® MTF, the self-pierce rivets are fed from a belt magazine. Both systems are primarily used in manual production. Both systems offer the option of communicating with robots or a higher-level system controller.
The RIVSET® ABF system is orientated toward the highest demands of automated production. Its fields of application generally include mass production, e.g. in the automotive industry and the white goods industry.
The RIVSET® ABF processes loose self-pierce rivets and offers the following functions:
- Complete process monitoring and the transparent documentation of process data
- Rivet length control
- Touch-screen display
- Short cycle times
|
|
Cordless Gas Framing Nailer GT90CH
The GT90CH cordless clipped head gas framer combines the convenience of a cordless tool with the power and utility of a pneumatic framing nailer. This well-balanced framing nailer has the power to complete all of your framing and sheathing requirements. Perfect for framing crews, re-modelers, punch-out or service crews who need to un-tether from the hassel of a hose and compressor. Built with components that ensure all day duribility and reliability, the GT90CH comes with a Ni-MH battery, battery charger, service tools, durable plastic case and features a 2-year limited warranty.
|
|
Riveting tools are a feather in FAR’s cap.
There are more than 30 models, to comply with the most different needs: manual, pneumatic or battery suitable for fastening blind rivets or threaded inserts.
The range of FAR riveting tools offers world-wide advanced articles, from hand tool to oil-pneumatic tools with automatic loading of the rivet.
|
|
Freedom:
Fire Bird: The versatile cableless Riveting Tool for outdoor and indoor applications.
High Performance:
Large working range, from M3 to M8 in aluminium and steel, M6 stainless steel and M10 in aluminium. High battery autonomy. High efficiency through ball screw drive power transmission.
High Speed Setting:
Safe and easy drill-on of the blind rivet nuts. Constant speed setting and automatic switching to drill-off at the end of the setting process.
Quick mandrel exchange:
Quick mandrel exchange and stroke adjustment without tools.
Operating Voltage: 12 Volt DC
Pulling Strenght: 13.000 N
Weight: 2,3 kg
Battery:
Nominal Voltage: 12 V
Nominal Capacity: 1,4 Ah
Number of cells: 10
Cells composition: Nickel-Cadmium with thermic overcharge protection
Weight: 0,62 kg
Quick battery charger:
Input Voltage: 230V/50 Hz
Charging Time: Approx 1 hour (full charge)
Weight: 1,4 kg
|
|
|
|
|
|
Orbitform Group's line of orbital bench machines are modular and designed for tabletop use across many industries and applications. The flexible design allows components to be added to support many applications.
Bench Machine Features:
Orbitform Group's line of bench machines contain a solution for a wide range of applications. Features of their reliable and durable construction include:
-Precise forming of .06" to .75" (mild steel) finished head diameter or equivalent cross section
-Max downward force ranging from 590 lbs to 7510 lbs
-Adjustable stroke ranging from .06" to 6.00"
-Vertiacal head height adjustment from 5" to 10" (127-254mm)
Orbital bench machines are available with many options and capacities to fit your specific application. These modular machines are available in single, multi-form or roller form configurations.
Orbitform Group supports our customers with factory trained sales engineers and applications specialists. We have the expertise to deliver the solution for any forming requirements.
|
|
MANUAL GRIPS for nuts of m3 with M10 and TOOLS OIL AND AIR for nuts of M4 with M10.
NEW: 1 only Trigger: setting and unscrewing in only operation!
|
|
RIVCLINCH® Pliers
The extensive range of pliers offers the user the option to cost-effectively use the Clinch technology in their operations. The RIVCLINCH® range of pliers is designed to allow you to find the right solution for each application.
A large number of the tools are suitable for all handheld devices, allowing them to be interchangeable.
A handheld RIVCLINCH® device consists of the following components:
- Tool head
- Pressure intensifier (booster)
- Handle or two-hand start
- Tool set
- Hose package
|
|
TOX Joining Technique
- the leading clinching system with many advantages:
* economic - Clinching is significantly more cost efficient than spot welding
* reliable - We guarantee joint strength values
* versatile - Clinching is usable for numerous material combinations
* environmentally friendly - Clinching is energy saving, clean, quiet
* user oriented - TOX = technology + production equipment from one source
TOX-Tongs
These C-frame or X-version tongs are driven hydraulically, pneumohydraulic or elecrically.
Standard versions include TOX-Handheld, TOX-Machine or TOX-Robot tongs.
Available with various throat depths.
The modular kit system allows to adapt these TOX-tongs to any component and handling equipment. Special models are possible. In this way, all applications and quality assurance
tasks will be fulfilled with a clear interface.
|
|
Portable unit
Length 300 mm
Width 32 mm
Height 165 mm
Throat opening 6 mm
Throat, horizontal 34 mm
Throat, vertical 30 mm
Drive hydraulically
Weight 4 kg
Pressure force 50 kN
For use with a single acting hydraulic unit like our HAT 520.
|
|
|
AGME flexible riveting centres improve the productivity and flexibility of current riveting systems. They enable even the most difficult component to be riveted in one operation regardless of the number riveting positions. The CNC controller is reliable, fast and easy to use. Any programmer/operator can very quickly learn to operate this system. Two or three servocontrolled axis machines are available on all models in order to offer the most flexible solution to our customers as they change from their more traditional methods of production.
|
|
CNC riveting center
Standard version:
* Force preselection, infinitely variable
* Ram speed, infinitely variable
* Stroke limitation infinitely variable manually or by program
* Setting of riveting time, programmable
* Safety 2-hand control
* Automatic riveting process
* Standard rivet head
Accessories:
* CNC coordinate table
* CNC rotary table
* Safety light curtain
* automatic rivet feed
* automatic component feed
* riveting force monitoring
* rivet heads and anvils for special applications
|
|
This eyeleting machine is fitted with a spheroidal cast iron support in order to resist high pressure, a tubular steel bench loom mm 25x25 with chipboard panel covered in formica cm 36x50.
It is available with a cylinder of 70 diameter in anti-rust material on the top of the machine or with a cylinder diam. 40x250 for the lever. With this equipment it is possible to clinch eyelts with diameter larger than 5 mm.
|
|
|
|
|
|
NEW !!! TECTOOL TF25
TECRIVETcutter - For difficult accessible places
NEW !!! TECTOOL TF50
TECRIVETcutter
TECTOOLbasic TF 70
Shears rivet
- Nosepieces 3,0 - 6,4 mm
TECTOOLbasic TF 165
Hand riveter
- Nosepieces 3,0 - 5,0 mm
- with opening spring
TECTOOLbasic TF170
Hand riveter
- Nosepieces 2,4 - 5,0 mm
TECTOOLbasic TF 190
Hand riveter
- Nosepieces 2,4 - 5,0 mm
- with extra long nosepieceholder
- from horizontal and vertical use
TECTOOLpremium TF 200
Hand riveter
- Nosepieces 2,4 - 5,0 mm
TECTOOLbasic TF 270
Lever riveter
- Nosepieces 3,0 - 6,4 mm
- with mandrel collector
TECTOOLbasic TF 300
Lever riveter
- Nosepieces 4,8 - 6,4 mm
- with mandrel collector
TECTOOLbasic TF 365 SET
Hand nut riveter
- incl. various TECNUT
- incl. mandrel and nosepieces M4/M5/M6
TECTOOLpremium TF 400
Lever riveter
- Nosepieces 4,8 - 6,4 mm and for TECLOCK/Monobolt/Magna-Lok
- with mandrel collector
TECTOOLpremium TF 606
Hand nut riveter
- with quick change mandrels
- Nosepieces M3/M4/M5/M6
- optional nosepieces for blind rivet bolts M4/M5
TECTOOLpremium TF 610
Hand nut riveter
- with quick change mandrels
- Nosepieces M5/M6/M8/M10
- transport box
- inklusive Transportkoffer
TECTOOLpremium TF 611 Screw spindel
Hand nut riveter
- with quick change mandrels and screw spindel
- Nosepieces for Blind rivet nuts M5/M6/M8/M10
- Nosepieces for Blind rivet bolts M5/M6/M8
- transport box
|
|
|
|
|
|
RIVSET® Self-Piercing Riveting Systems
Bollhoff have three systems that are designed for different fields of application.
The RIVSET® HTF is a universal battery-operated handheld device for RIVSET® rivets with a diameter of 3 or 5 mm.
Fields of application:
- on construction sites
- in prototype construction
- as a re-working solution
- for repairs
For smaller volume applications, the RIVSET® CTF is suitable for processing belt-magazine self-pierce rivets. This system allows for a quick change of different rivet geometries and is suitable for all types of RIVSET® rivets. The RIVSET® CTF is reliable and maintenance-friendly due to its simple construction.
The RIVSET® EBF self-pierce riveting system is suitable for processing loose RIVSET® self-pierce type rivets for smaller volume applications. Even the smallest rivet geometries (3 x 4 mm/3 x 5 mm) can be fed in a process-stable manner via a blast of air. The feed of the respective rivet geometries is accomplished via a drum separator, which ensures quick and gentle separation. The EBF system stands out due to its compact construction. It is designed for quick installation and commissioning as a "turn-key" solution.
|
|
|
|
|
|
Hydra-Pneumatic Riveter
With the first major innovation since the 1920s, Orbitform has given rivets a smooth new ride. The HP2000 hydra-pneumatic impact riveter is more controllable and adaptable than any impact riveting machine on the market today. Available with up to a 24 inch throat, the HP2000 can autofeed and quickly set solid rivets up to 7/16 inch diameter.
Orbitform's HP2000 riveter features:
- Twenty ton capacity
- Lubed for life ram assembly (less maintenance)
- Single/multiple tooling available
- Ease of alignment (upper/lower tooling)
- Ability to set rivets at multiple finished heights
- Few moving parts and wear points
- Long stroke range
- Quiet operation
- Optional Watchdawg for force and distance monitoring/control
- Palm buttons, foot switches or light curtains available.
The HP2000 can automatically compensate for minor material thickness or rivet length variances for consistent results. Setting pressure can be accurately controlled, allowing for use on brittle or fragile parts as well as heavy-duty applications.
Profit from over twenty years of industry experience and let Orbitform's new HP2000 guide your process! For further information please call 1-800-816-9661 or email sales@orbitform.com.
|
|
TECTOOL TF N12A
pneumatic-hydraulic Rivet nuts TECTOOL N12A
- Nosepieces for rivet nut M3 - M12
- Quick change system
- Pressure required max. 7,0 br
- Traction power 20 kN at 6 bar
- Air consumption 5,5 ltrs pro stroke
TECTOOL TF R68
Pneumatic-hydraulic riveting tool
- Nosepieces 3,0 - 6,4 mm
- Vacuum absorption for the mandrel with automatic switch off
- Pressure requirde max. 7,0 br
- Traction power 13 kN at 6 bar
- Air consumption 2,0 ltrs. per stroke
TECTOOL TF R55
Pneumatic-hydraulic riveting tool
- Nosepieces 3,0 - 5,0 mm
- Without vacuum absorption
- With mandrel collector
- Pressure required max. 6 bar
- Traction power 8 kN at 6 bar
|
|
Adtech Heavy Capacity Impact Riveter
Adtech H-4000 direct-drive, high-speed, hydraulic impact riveters are rated at 40 tons with 4 inches of stroke and a cycle time less than one second.
Operator safety is maximized, as the ram stops mid-cycle if palm button actuators are released during the 0.8 second cycle.
Advantages include:
*Rated power available throughout full range of machine stroke
*Smooth and quiet operation
*No perishable drive train components
*Adjustable rivet setting force
*Designed for integrated force and position monitoring (optional)
*Standard H-4001 and H-4002 riveters are pedestal models with free standing hydraulic power units. The machines are available as table-mounted units with hydraulic power unit mounted beneath table for conservation
Recommended Options:
*Watchdawg Package
*Vibratory feeder upgrade
*Probe type safety device
*Dual Opto-touch actuation (requires part holding fixture)
*Spare tooling package (2 Jaws / 3 Drivers / 4 Rollsets)
*(4) Leveling Pads
|
|
Riveting tools are a feather in FAR’s cap.
There are more than 30 models, to comply with the most different needs: manual, pneumatic or battery suitable for fastening blind rivets or threaded inserts.
The range of FAR riveting tools offers world-wide advanced articles, from hand tool to oil-pneumatic tools with automatic loading of the rivet.
|
|
Orbitform Group's medium capacity Milford impact riveters are our most popular machines. Designed for semi-tubular rivets up to 5/16" diameter, these machines offer the same speed and dependability as our light capacity riveters.
Medium Capacity Features:
*Rapid feeding and setting for rivets up to 5/16" diameter.
*Ergonomic operation and reduced noise levels.
*Throat depths up to 24".
*Simple hopper changeover.
Typical applications include hand and garden tools, brakes, clutch assemblies, and HVAC components.
All of our riveters are available with an unlimited variety of custom tooling, anvils, anvil holders, and special fixtures, dependent on your application.
Orbitform Group supports our customers with factory trained sales engineers and applications specialists. We have the expertise to deliver the solution to any riveting requirement.
|
|
|
|
|
|
Milford Model 216 is a general purpose manual operated assembly press designed for experimental work, re-work, pilot runs, de-riveting or intermittent job shop work. Rivet capacity is 3/16" diameter up to 1" long.
This riveter is available with or without jaws, however, jaws are recommended as they assist in the accurate position the fastener prior to assembly.
Maximum rivet setting force is transmitted with minimum operator effort via the same toggle mechanism concept used in our automatic Milford impact riveting machines.
Through the use of our standard Milford rivet setting tooling, the same high quality results are achieved as with our high production automatic riveters.
Model 216 Specifications:
*Capacity: Up to .187" (4.78 mm) diameter x 1.0" (25.4 mm) long, mild steel semi-tubular rivets
*Throat depth: 6" (152.4 mm)
*Ram stroke: 1.25" (31.8 mm)
*Overall height: 14" (355.6 mm)
*Footprint: 4" x 8" (102 mm x 203.2 mm)
*Weight: 25 lb. approx.
Recommended Options:
*Spare tooling package (1 Jaw / 1 Driver / 3 Rollsets)
*Part Holding Fixture
|
|
Orbitform Group's medium capacity Milford impact riveters are our most popular machines. Designed for semi-tubular rivets up to 5/16" diameter, these machines offer the same speed and dependability as our light capacity riveters.
Medium Capacity Features:
*Rapid feeding and setting for rivets up to 5/16" diameter.
*Ergonomic operation and reduced noise levels.
*Throat depths up to 24".
*Simple hopper changeover.
Typical applications include hand and garden tools, brakes, clutch assemblies, and HVAC components.
All of our riveters are available with an unlimited variety of custom tooling, anvils, anvil holders, and special fixtures, dependent on your application.
Orbitform Group supports our customers with factory trained sales engineers and applications specialists. We have the expertise to deliver the solution to any riveting requirement.
|
|
|
|
|
|
Orbitform Group's multi-forming heads are used for applications where more than one form is required per powerhead cycle. These multi-forming heads are the solution for wide variety of center distances, number of forms, form sizes and form heights.
Multi-form Head Features:
Orbitform Group's multi-form heads are available in wide range of sizes, capacities, number of forms, form heights and reaches. Features of their reliable and durable construction include:
*Forming capacities ranging from .125" - 1.0" (3.18 - 25.4 mm) finished head diameter (mild steel)
*Number of forming points ranging from 2 - 10
*Center distances ranging from .188" - 12.0" (4.78 - 304.8 mm)
Multi-forming heads provide solutions for application that require more than one form per machine cycle. Each of these heads come with removable peen tools. These peens are available in a wide variety of styles to meet your finished form geometry needs.
Orbitform Group supports our customers with factory trained sales engineers and applications specialists. We have the expertise to deliver the solution for any forming requirements.
|
|
TACKER N 200 ZH 16 with POGOSTICK
Well suited for nailing cardboard with large sized staples
23 mm crown size.
Loading capacity: 150 king size staples.
To be used for fixing wood, strong cardboard, roofing felt,
damping plates. Appliances: carton making, building and
carpenter work, setting up wooden cases, roofing.
Technical Data: 2.2 kg, Dimensions 335 x 250 mm,
9 stapling operations/second
Air pressure: 5.5 - 8 bars, air consumption: 1.5 NL./stapling.
Depending upon the thickness of the material
the ZH-staples can be offered with leg lengths of
19, 25, 30, 38 45 mm.
Connection with a POGOSTICK:
Combined with a holding bar with double grip and trigger
the pneumatic tacker can be inserted into oversized cartons.
Length 900 mm, weight 2.1 kg.
|
|
Riveting tools are a feather in FAR’s cap.
There are more than 30 models, to comply with the most different needs: manual, pneumatic or battery suitable for fastening blind rivets or threaded inserts.
The range of FAR riveting tools offers world-wide advanced articles, from hand tool to oil-pneumatic tools with automatic loading of the rivet.
|
|
|
|
Riveting tools, Nailing tools
