|
|
|
A range of of copper and aluminium foil tapes with highly conductive adhesive backing. Used in many applications for sealing gaps in seams, joints etc. to prevent leakage of RF signals. Available in two versions - Self Wound and with Release Liner.
|
|
Highly effective anticorrosive tape developed with a base film of adhesive molten galvanized zinc. Zinc coated layer will not be infiltrated by water, gas, etc. and will not age from ultraviolet rays, so corrosion does not develop from the inner layer.
The product is available in standard width 25,50,100mm x 20 meters long.
Width and length based on customer’s need are available on request
|
|
Temas engineering provides a variety of
conductive materials that can be used for
shielding and grounding. These materials
can be coated with conductive, nonconductive
adhesive, and can also be
laminated with all kind of insulation. These
materials can be customer designed.
|
|
3M™ VHB™ Tapes
3M™ VHB™ Tapes reliably bond metals, plastics & glass eliminating drilling and unsightly fasteners to enable creation of new material combinations and high impact visual designs.
|
|
* All foil tapes offer excellent conformability. They are also water resistant and offer a total vapour barrier.
* All foil tapes from Advance have a white siliconised release liner and are very easy to unwind.
* All foil tapes from Advance are fully anneeled and are as soft as production processes allow.
* All foil tapes from Advance have emulsion based acrylic adhesive. Acrylic adhesive increases its bond with age, conversely, it will also peel clean if left for a short period of time.
* All foil tapes are easy to tear.
* Foil tapes should be applied at between +10°C and +40°C
* Surfaces should also be as clean and dry as possible with any loose material and dust removed as far as possible
* Tapes should be stored at a temperature of no lower than +5°C. If tape is left in a van or unheated warehouse in the winter months, it will need time to warm up prior to application.
|
|
The term "mica" is used for a group of minerals that show perfect cleavage. Mineralogically speaking, they are sheets of silicate. The name comes from the Latin word micare, meaning to shine, in reference to the brilliant appearance of this material.
Von Roll's commitment to mica starts with mining, followed by the very specialized field of producing paper from a mineral and finishing with the production of special mica tapes as well as mica ancillary parts.
Von Roll uses two types of mica, phlogopite and muscovite, for a variety of applications and depending on the needed thermal and electrical characteristic, mainly in:
Electrical and thermal insulation of electrical machines
Thermal insulation of equipment that is subject to extremely high temperatures, such as induction ovens
Insulation of cable for fire resistance
|
|
|
The requirements placed on plate mounting tapes leave no room for half measures: the tapes must be as adaptable as the applications themselves. This is why the tesa Softprint Toolbox is the best possible solution for plate mounting. Available in both 380µm/15 mil. and 500 µm/20 mil. categories and comprising tapes of different foam properties, the Softprint Toolbox offers the tape that best fits your application.
|
|
Tapes with a polyester film backing and different adhesives
Polyester film backing imparts excellent chemical and thermal stability.
|
|
Scapa Polyethylene Tapes
Scapa is one of Europe's leading suppliers of high tack polyethylene to industries ranging from agriculture to sealing and decoration, and from building and construction to electrical. The range includes standard products available in a wide range of colours and sizes, and specialist products made for individual applications.
|
|
Polyethylene Tapes, polyethylene backing with a rubber adhesive, highly conformable, stretches easily
Full Description »
Polyethylene Tapes, used in general sealing of containers, electroplating and P.C. board masking, silicone chip holding, decorative, safety marking and color coding.
|
|
|
The term 'filmic tapes' covers a broad spectrum of carriers which includes PVC and polyethylene. Filmic tapes do look alike but they all have individual differences that make them ideally suited to specific applications. To help you make an informed decision about what tape to choose for your application, follow the guidelines below and throughout this site.
|
|
|
|
|
|
Self-adhesive sealing tape conceived for the sealing of joints according DIN 18542. Stress condition groups
1 + 2.
Characteristics: precompressed, expansive, resistant to driving rain, permanently elastic, ecologically beneficial, open to diffusions
Advantages
- Easily applicable without special tools
- Uniform and retarded behaviour of the compression
- The joints are sealed in one sole operating cycle.
The application of primers, preparatory paintings or
maskings are superfluous.
- Uneveness within the joints is completely compensable
by its expansive properties
- No setting period
- No problems as regards laterial adhesion
- Subsequent treatments, such as back-filling or
smoothing are not necessary
- No supplementary applications of sealants
The application of joint sealing tapes is independent of weathering conditions. The choice of the appropriate tape dimensopms os decisive for its function. Please contact us.
Everywhere, when a sealing tape meets with specific requirements, which sufficiently correspond to an airtightness inferior to < 1,0 and when the stress condition groups according to the German industrial specification DIN 18542 are not demanded, it is recommendable to apply the VITO VDB joint sealing tape.
|
|
Outstanding dimensional stability and tensile strength are the primary characteristics of PTFE coated glass-fabric pressure sensitive tape. Other features include:
Excellent strength
High heat resistance
Non-stick surface
Exceptional wear life
Available in the following grades:
Standard Grade (6085) - Preferred for most adhesive applications, smooth surface with remarkable non-stick properties.
Premium Grade (6095) - The smoothest surface for the most demanding applications
|
|
Scapa PVC Tapes
Scapa is the largest European producer of soft PVC tapes and has a wide range covering different qualities, thicknesses and market needs. The ranges are used in general purpose, electrical, construction and wire harnessing applications. The range includes market leader Barnier Orange PVC 6095, used extensively in the Builders Merchants market.
|
|
|
|
|
|
The term 'filmic tapes' covers a broad spectrum of carriers which includes PVC and polyethylene. Filmic tapes do look alike but they all have individual differences that make them ideally suited to specific applications. To help you make an informed decision about what tape to choose for your application, follow the guidelines below and throughout this site.
All Filmic tapes:
* Will peel clean from most surfaces.
* Have a writable surface except for AT6000 which has a silicone coating.
* Have some degree of electrical insulation due to the polymers present in the tape's manufacture.
* Have high elongation properties.
* Conform to awkward surfaces very well.
* Are generally water resistant.
* Have non-corrosive adhesives making them unlikely to react with the surface they are in contact with.
* Should be applied at temperature between +10°C and +40°C.
* Finally, please note; PVC is inherently flame retardant but polyethylene will burn easily.
* Low tack protection tapes actually have high tack but have low adhesion which enables them to peel clean from most surfaces.
|
|
Self fusing silicone tape
300% stretch
No adhesive and no residue
Conforms to shape
Temperature resistante from -50°C up to +260°C
Insulation to 400V/ mil
Protects against corrosion & contaminants
Forms an air & water tight seal
|
|
Flexible and elongable tape made of a high-adhesive butyl sealing rubber compound, self-protected by a 30 µm LDPE film.
Bu-tylene PE 30 Flex Professional has an excellent transversal and longitudinal elongation capacity in order to perfectly adhere to every irregular surface.
The product is highly adhesive to all materials, especially to plastic, glass, steel, polycarbonate, wood and bitumen.
|
|
|
Butyl with stretchable PE for duct wrap
|
|
|
tesa offers the most comprehensive range of TPP strapping adhesive tapes in the industry. TPP is a high strength film substitute for filament tape. There is a cost advantage to using TPP over filament tape since TPP gains its strength from the film and not the filaments. tesa combines a variety of adhesive systems and backing grades to satisfy some of the most difficult applications in the industry. tesa offers TPP tapes in broad variety of colors, and size dimensions, including spools for continuous production.
|
|
THERMOTAPE sealing tapes are manufactured from resilient texturised glass yarns. These products are characterised by excellent sealing properties.
THERMOTAPE is available as a robust construction in a large variety of dimensions. THERMOTAPE is also supplied in finer constructions used primarily to prevent metal to metal to glass contact. To help reduce the end-user's costs as well as to make fitting over bolts and studs easier, THERMOTAPE L products are also available as a laddered tape construction with an open section down the middle.
THERMOTAPE sealing tapes are used for such applications as e.g. casing seals for doors and inspection windows in solid-fuel or wood-fired boilers and stoves. THERMOTAPE C with channelled sections is a special development to facilitate fitting around the window of glass-fronted appliances.
|
|
Thermal conductive pressure-sensitivite adhesive tapes
Lohmann Duplomont® thermal conductive tapes provide a flexible bond with excellent gap filling and vibration dampening properties.
Product Benefits:
- Clean assembly without surface contamination as frequently associated with thermal conductive pastes
- Process simplification
- In contrast to rigid materials, Duplomont tapes accommodate materials of different coefficients of thermal expansion
|
|
self-adhesive sealing tape made of a butyl rubber compound self-protected by a Fleece in Polypropilene.
Bu-tylene Fleece Professional is compatible with common glues (cement and non-cement based adhesives).
The tape is highly adhesive to all materials and especially to plastic, glass, steel, polycarbonate, wood and bitumen as well.
|
|
|
30 gsm non woven tissue butyl tape
|
|
Waterproof Carton Sealing Tape
- Strong
- Bond strength of tape increases with age
- Very good abrasion resistance
- Very good water resistance
- Gloss finish
Applications:
- For sealing waxed and siliconised cartons
- Sealing heavy duty packaging items, especially for export shipping
|
|
Nextel™ Woven Tapes are made from the same high-quality, continuous alumina-boria-silica fibers that have made 3M™ Nextel™ Ceramic Textiles the best solution for high temperature applications. They provide simplicity and dependability at two different high-temperature limits: 2012° F (1100°C), and 2500°F (1370°C).
Typical applications include:
- Electrical insulation
- Hose protection
- Fire zone cable protection
- Pipe wrap
- Automotive
|
|
| ... products without technical information |
| |
|
|
Adhesive Tapes
