|
|
|
Backing high pressure sensitive adhesive or conductive adhesive on our shielding fabrics,copper foil or aluminium foil.It often used on note-book CABLE wire material , on LCDPDP wire material , cell-phone wire material.The width and length of the tape are made as your requirements.
|
|
Filament-reinforced tapes provide excellent security against impact, pressure or instability during the transportation of heavy objects. In addition, filament tape is a great choice for bundling, metal tabbing and residue-free adhering.
|
|
Labels are printed using, amongst other things, so-called "narrow and mid-web" flexographic printing. The difference to the printing of flexible packaging lies in the size of the printing cylinder. Label printing is carried out with a smaller cylinder circumference, and the print runs are also smaller.
A frequent change of motifs, a large number of different types of content and information on the label, as well as complex designs, demand the highest print quality. Lohmann offers a broad selection of plate mounting tapes for flexographic label printing with the DuploFLEX® 3 and 4 series. These adapt perfectly to the different requirements when printing labels.
|
|
|
These qualities are double-side self-adhesive mounting tapes consisting of a closed-cell polyethylene foam and are equipped with a special pressure-sensitive acrylate adhesive. These tapes are suitable for both indoor and outdoor applications. High initial and rapid final adhesive strength required for mounting of Georgian profiles are accomplished through the application of VITOMOUNT 125. Subsequent sealing of the joint within the marginal zone between the window glass and the Georgian profile is, in principle, conformable to the present technical standard and is absolutely obligatory. The recommended temperature of application should be between + 18°C and + 30°C. Since Georgian profiles of different materials such as, for example, wood, metals and plastics are applied, the prevailing conditions must be optimally respected by the choice of the adequate thickness.
|
|
Scapa Foam Tapes
Single Sided
The Scapa range of quality single sided compression foam sealants comprises water, air, dust and weatherseal products. There is an extensive hardness, thicknesss and colour range.
|
|
3M™ Single Coated Foam Tape
High-tack, pressure-sensitive acrylic adhesive on one side of a strip of urethane or vinyl foam bonds the foam to most surfaces. For gasketing, sealing, baffling, cushioning and insulation. Select varying thicknesses of high- or low-density open cell urethane, and high- or medium-density closed cell vinyl.
|
|
Taconic TAC-TAPES™ are constructed with high-quality adhesives and backing materials to deliver superior performance. A choice of silicone or acrylic adhesives is available on most Taconic TAC-TAPES™. Benefits include:
Optimal release
Low friction
Electrical insulation
Dimensional stability
Excellent temperature resistance:
Acrylic adhesive: -40°F - +350°F (-40°C - +177°C)
Silicone adhesive: -100°F - +500°F (-73°C - +260°C)
|
|
|
This family of rugged cloth tapes provide adhesion to most surfaces in a variety of environments, including moisture and UV. Specific tapes may be used in specialty applications, like outdoors, offering clean removal for up to 6 months.
|
|
|
|
|
|
* All cloth tapes are strong and offer good conformability
* All cloth tapes from Advance Tapes have non-corrosive adhesives keeping any reaction with the surface applied down to a minimum
* Some cloth tapes will peel clean from surfaces, usually polycoated tapes perform better in this respect although surfaces should be tested if this is critical
* If you wish to write on the tape for identification purposes, uncoated cloth tapes may be the best choice. Alternatively, tapes with a matt surface will perform better than gloss coated tapes. Please request a sample to test if this is an important factor in choosing the tape
* Cloth tapes should be applied at between +10°C and +40°C
* Surfaces should also be as clean and dry with any loose material and dust removed as far as possible
* Tapes should be stored at a temperature of no lower than +5°C. If tape is left in a van or unheated warehouse in the winter months, it will need time to warm up prior to application
* The most popular colours for cloth tapes are black, silver and white. For a much wider range of colours, polycoated tapes offer the best choice.
|
|
Line Marking Tape
- A highly visible hardwearing PVC film
- Produces durable conformable bright lines
- Quick and easy application with negligible downtime
- Suitable for use on a vast range of internal floors
- Available in Solid colours or stripes
- Easily applied using Easyline Line Marking Tape Applicaton
|
|
Scapa Packaging Tapes
Our product portfolio brings a comprehensive range of standard packaging solutions for almost all potential bundling and sealing requirements. Scapa packaging tapes encompass a wide variety of pressure sensitive solutions that covers different packaging and sealing requirements either for domestic or industrial needs. Scapa packaging product portfolio includes OPP and PVC films, filament reinforced OPP and paper tapes. The range provides standard solvent based packaging tapes, low noise and high tack solutions.
|
|
tesa offers a comprehensive range of adhesive tapes for a wide variety of packaging applications. From sealing cardboard boxes and cartons, padded envelopes, inner packaging of boxes and bags, to security sealing of cartons, you can count on tesa's line of packaging tapes to protect your valuable packages throughout every step of the logistical chain.
|
|
|
Our wrap-around tapes and discs are designed to mask parts during painting, plating, powder coating, anodizing, and other finishing applications. These silicone and polyester materials can handle intermittent temperatures as high as 600 F (316 C).
|
|
Normal gummed paper tape are made in accordance with the German standards DIN 55476 page 1 and essentially made up of two strips of Kraft paper hot glued together (~70°C) upon the interposition of fibreglass threads: some positioned lengthwise and others in an “X” form with an angle of 37°.
The application of vegetable glue (starch gum, standard spreading) or animal glue (gelatine, spreading on request) on paper strips complete the tape.
|
|
Optical clear applications
With the Duplocoll® CPT (clear performance tape) adhesive tape range Lohmann has significantly improved the qualitative properties of acrylic adhesives. The pressure-sensitive acrylic film is completely transparent. The light refraction index is almost identical to that of glass. Duplocoll® CPT opens up interesting and economical possibilities for design and production (e.g. for glass-metal connections used for example in the building and furniture industry).
|
|
|
ZincTape comprises a layer of 99,99% pure zinc 80 microns thick with 25 microns of adhesive protected by a removable siliconised paper. It is available in rolls in shapes based on the customer's needs. A feature of the new laminated zinc tape is its electrically conductive adhesive:this is achieved by incorporating a percentage of powdered zinc into the adhesive during manufacture. Since it's very easy to apply ZincTape, our product can be used in different fields, such as automotive and railway sectors, refineries, pipelines, tanks, poles and stakes and others.
|
|
Programme
• TEFLON® PTFE/silicone fabric
• Tapes, amongst other zone/duplex
• Closed and open fabrics
• Conveyor belts (punched designs)
• Metal sealing belts (endless/coated)
• PTFE fabric/PTFE KEVLAR®
• Film/foils
Options
• Connection of the belts
• Anti-static
• Laminated
• Cut lengths
|
|
|
|
|
|
|
These tapes are also applicable in rooms where they are temporarily exposed to an elevated air-humidity such as, for example, in bathrooms. However, their applications are not recommendable in humid rooms subject to an elevated humidity caused by the influence of splashed water and condensed moisture. These tapes are resistant to softening agents and are compatible with plexiglass. They are applicable within a temperature range from - 40°C up to + 70°C. Their compatibility with commercially available mirror varnishes has been verified and ascertained. Their paramount peeling and shearing resistance values guarantee an eminent stability of the adhesive joint, even under elevated weight load. The soft and flexible foam compensates slight uneveness.These qualities are also deliverable with an easily tearable protective paper covering. As far as the mounting of mirrors on surfaces with low-surface tension is concerned, the application of special tapes is recommendable. We are pleased to provide you with adequate and detailed information.
|
|
3M™ Damping Foils feature a constrained layer construction consisting of a pressure sensitive viscoelastic polymer and a dead-soft aluminum foil (constraining layer).
3M™ Damping Foils' construction effectively converts vibrational energy to negligible heat. Designed to be used where metal, plastic panels or support structures create disruptive or damaging resonant vibration. Damping Foils can be designed into or retrofitted to a broad range of industrial products, electronic equipment and appliances.
|
|
The strong, easy-to-tear, latex-free and hypoallergenic tape for securing medical devices and for light immobilization support.
3M cloth adhesive tape has high initial adhesion and is economical and easy to use. It tears easily crosswise and lengthwise. This tape does not contain natural rubber latex in the product or its packaging. Most other cloth adhesive tapes do contain natural rubber latex.
|
|
|
The term 'filmic tapes' covers a broad spectrum of carriers which includes PVC and polyethylene. Filmic tapes do look alike but they all have individual differences that make them ideally suited to specific applications. To help you make an informed decision about what tape to choose for your application, follow the guidelines below and throughout this site.
|
|
3M™ Adhesive Transfer Tape
Pressure-sensitive adhesive on a release liner that allows you to quickly bond two surfaces together. Available in a variety of acrylic adhesive formulations to help meet production and end use requirements. Apply by hand or with a dispenser.
|
|
Scapa Semi-Conducting tapes perform electrical functions within a cable. Their primary function is to equalise the field current around the conductor or core and to ensure electrical contact with the earthing system. This reduces the electrical stress on the insulation material and enhances performance. They can also be used to prevent electrolytic corrosion of metallic armour layers.
Our range of semi-conducting tapes offer excellent solutions for both core and conductor screening. They prevent extrudate penetration of the conductor wires, and with high tensile strength and abrasion resistance, help to prevent ‘birdcaging’ through strong binding properties.
The range also incorporates tapes which have first class bedding characteristics, and are available in a plain or printed format. All of these tapes are free from halogens and sulphur to improve fire safety and prevent copper staining.
|
|
Isotape® and Intertape® tape brands offer a wide range of backings and adhesive systems to meet the current application requirements of the electrical industry. This electrical insulation product line is manufactured under the strictest standards, with performance and reliability in mind. Most of the adhesive tapes carry UL recognition (UL E20780 for Intertape® products and UL E315208 and E315249 for Von Roll).
Von Roll teams work at developing products that provide our customers with outstanding quality and service.
Our distribution networks and company sales offices are conveniently located throughout Europe and Asia. Our highly trained sales and service representatives offer quick response with the technical expertise you need.
|
|
* Flame retardant and self extinguishing - safe to use on electrical cables
* Wide range of colours - suitable for colour coding
* UV resistant
|
|
|
|
|
|
VITOLEN 111 G partition wall tape consists of a flexible soft foam with closed cells, foam excels by its superior sount absorption, elevated resilience, longevity and reliablility in accordance with biological standards for constructions. Sonometrical examinations in conformity with the German industrial standard specification DIN 52210 have been effected. According to the sound-related expertise issued by the Fraunhofer-Institut für Bauphysik (Institute for constructinal physics) in Stuttgart, an evaluated measure indicating sound insulation of joints
(RST,w = 59 dB) has been attained.
Advantages of the product: without any protective film covering - rapid and improved working.
As far as the preventive fire-proofing is concernded, the delivery progamme comprises two different product types of partition wall tapes in the quality B 1 - hardly inflammable (German industrial standard specification DIN 4102 - according to the requirements of building regulations issued by the German federal states).
Dimensions and delivery specification: colour black, thickness 3 mm, length of roll 30 m.
Widths: 30, 45*, 50, 70, 75, 95, 100 mm (*production programme)
Intermediary width dimensions and supplementary thickness dimensions are available on demand.
|
|
Duplomont 918
- As being held in place by an invisible hand
– mirrors in all shapes and forms.
- Bonded by Duplomont 918 on wood, ceramics, glass or plastic.
- A product successfully used for over 28 year
|
|
|
|
|
|
|
These tapes are also applicable in rooms where they are temporarily exposed to an elevated air-humidity such as, for example, in bathrooms. However, their applications are not recommendable in humid rooms subject to an elevated humidity caused by the influence of splashed water and condensed moisture. These tapes are resistant to softening agents and are compatible with plexiglass. They are applicable within a temperature range from - 40°C up to + 70°C. Their compatibility with commercially available mirror varnishes has been verified and ascertained. Their paramount peeling and shearing resistance values guarantee an eminent stability of the adhesive joint, even under elevated weight load. The soft and flexible foam compensates slight uneveness.These qualities are also deliverable with an easily tearable protective paper covering. As far as the mounting of mirrors on surfaces with low-surface tension is concerned, the application of special tapes is recommendable. We are pleased to provide you with adequate and detailed information.
|
|
The high performance pure acrylic
adhesive delivers secure bonding in a
variety of applications.
The adhesive has been designed to provide
a permanent bond even at high temperatures
and its properties include resistance to extreme
chemical exposure.
|
|
tesa offers a comprehensive range of adhesive tapes for a wide variety of packaging applications. From sealing cardboard boxes and cartons, padded envelopes, inner packaging of boxes and bags, to security sealing of cartons, you can count on tesa's line of packaging tapes to protect your valuable packages throughout every step of the logistical chain.
|
|
|
|
Adhesive Tapes
