|
|
FUCHS LUBRICANT France proposes its range ANTICORIT. These products allow the protector of the metal parts against corrosion under all the conditions of storage and forwarding whatever the durations necessary (of a few days to several years).
The ANTICORIT are declined on technologies in base solvent (damp-proof properties or dewatering), aqueous or oily.
FUCHS also proposes packagings of protector of the type VCI (clean, dry and sure protector against corrosion).
|
|
|
ZincTape comprises a layer of 99,99% pure zinc 80 microns thick with 25 microns of adhesive protected by a removable siliconised paper. It is available in rolls or in shapes based on the customer's needs. A feature of the new laminated zinc tape is its electrically conductive adhesive:this is achieved by incorporating a percentage of powdered zinc into the adhesive during manufacture. Since it's very easy to apply ZincTape, our product can be used in different fields, such as automotive and railway sectors, refineries, pipelines, tanks, poles and stakes and others.
|
|
PRO-setral-PL 941
In practice the preservation of metallic blank and highly polished surfaces of moulds, tools and equipment very often proves to be difficult.
Regardless if oil or wax based products are used, high scrap is caused, costly subsequent cleaning is necessary and insufficient corrosion protection of moulds and tools is given.
PRO-PL 941 is our new, innovative grease-like corrosion protection agent which offers all positive properties of conventional oil and wax-based corrosion protection agents. At approx. +70°C it evaporates without residues, displaces humidity and does not creep inside the tool.
See for yourself and ask for free sample!
|
|
- Cold Galvanising Spray: A high zinc content galvanising spray for metal components requiring a permanent anti-corrosion coating.
- Heavy duty Rustshield: Thin waxy film that gives extended corrosion protection even in the harshest conditions. Use for extended indoor storage or parts in transit.
- Z25: is a specially formulated clean oil. It provides short term corrosion protection for indoor products.
- Z30: is an excellent long term corrosion protection. Designed for both indoor and outdoor products.
|
|
LubTool 6000 is a modern product, which forms a thin, fat-like protective film. The reliable corrosion protection remains even when longer storage and strong demand.
LubTool 6000 verharzt and cannot be again easily removed after longer storage time. Injected parts can be worked on problem-free drahterosiv.
LubTool 6000 does not contain FKW, CKW and FCKW
|
|
LPS 3® Premier Rust Inhibitor
Forms a transparent, soft, waxy film for protection and lubrication
Inhibits rust and corrosion; protects steel parts indoors for up to 2 years
Inhibits exfoliation and filiform corrosion of aluminum
Penetrates to displace moisture
Does not contain chlorinated solvents or silicone
Nonconductive
Easily removed with LPS degreasers
Safe on most surfaces
NSF Category Code H2 Registration No.: # 129027 Aerosol
# 059849 Bulk
Accepted by the Canadian Food Inspection Agency - Category n1
Inverta Spray Valve
HardCoat Corrosion Inhibitor
Durable, hard transparent film
Multi-year protection of metal parts in outside storage
500 plus hours salt spray resistance
Low odor and nonconductive
Commonly used on sides and tops of aircraft fuselages
Resists dripping and puddling during spray application
Safe to use on rubber, fabric, plastics and paints
Ready-to-use and can be applied with conventional airless or air-operated spray equipment
|
|
3M™ Dust Control Spray
A paint booth protection product that attracts and traps dust and dirt. Creates a film that helps produce cleaner paint jobs. Liquid, applied with garden type sprayer. Spray applicator also available.
|
|
ACMOS Special coatings for the glass industry
pour moulages et outils (résistant aux hautes températures)
for chutes (heat resistant)
for rotary blowing machines (heat resistant)
|
|
Technical sprays for surface and corrosion protection
WEICON Aluminium Sprays
Aluminium pigments of a purity of 99.5% offer excellent corrosion prevention for all metal surfaces combined with a high-temperature resistance.
WEICON Brass Spray
WEICON Brass Spray is a genuine brass coating spray. It is used for the protection and visual enhancement of a wide variety of materials.
WEICON Chrome Silver Spray
WEICON Chrome Silver Spray is a high-brilliance, anticorrosive surface coating. The special formulation and highest purity of the metal pigments employed create an extremely high gloss finish.
WEICON Copper Spray
WEICON Copper Spray is a high-quality metal spray with outstanding weathering resistance and excellent adhesion. Used as a protective and decorative coating, it provides an attractive finish for indoor and outdoor applications.
|
|
Zinc Anode Activation Paste for concrete and dry environments
Zap is a paste which is developed specifically for galvanic zinc anodes when applied in dry environments. Zap keeps the zinc surface moist and active as it contains a unique blend of moist-binders and zinc surface activators.
It enhances the performance and anode efficiency and guarantees a continuous current density even in dry environments like concrete and arid lands. ZAP has a sealant-like behaviour, is a high viscous and can be applied with sealant-guns.
ZAP comes in standard 210ml canisters or 600 ml canisters which can be used with standard manual or battery charged sealant guns. Special flat nozzles are available upon request.
|
|
Galvanic Anodes for cathodic protection of steel in concrete
The Galvanic Anode protection systems utilize sacrificial anodes that naturally generate an electrical current to mitigate corrosion of the reinforcing steel. Zinc has a lower (more negative) potential than steel, so the Galvanic Anode provides the current to inhibit the corrosion of steel in concrete.
Galvanic cathodic protection systems, which use sacrificial anodes, have recognized advantages of simplicity and reliability, and have recently become available as a viable alternative to ICCP. Unlike ICCP, galvanic CP systems require no extensive wiring or conduit, and no power supplies. Their inherent simplicity greatly reduces the need for ongoing monitoring and maintenance.
In concrete structures, zinc anodes are typically used both for maintenance and new structures.
A wide range of zinc anodes specifically developed for concrete applications are available.
|
|
ZincLayerAnode (ZLA) is a sacrificial galvanic anode specifically designed for giving electrochemical protection, known as cathodic protection, for the prevention of corrosion of the concrete steel reinforcement.
It is applied upon the concrete surface. The zinc-layer is electrically linked with the steel reinforcement. In this way the electric-circuit is completed because electric current flows through the adhesive layer and concrete by means of ionic conductance (both materials are so-called electrolytes). Since zinc has a natural potential which is more electronegative than the steel reinforcement, the zinc becomes the anode after installation and forms a new corrosion cell in which the reinforcement is forced to be the cathode.
In this way the corrosion process within the concrete is transferred to the zinc-layer avoiding futural spalling and cracking of the concrete.
ZLA is available in rolls 250mm width x 25 meters long . Thickness 0,25mm
|
|
Zinc Sheet Anode for anticorrosion protection of reinforced steel in concrete
Zinc sheet is applied up on the concrete surface .
Zinc sheet stops corrosion by placing steel in concrete in a protected cathodic state. Stopping corrosion helps prevent concrete deterioration. Unlike impressed current systems, Zinc sheet is fully self-powered and self-regulating, providing the proper current to maintain steel polarization. It requires no external power source, no costly electrical work and minimal monitoring.
Zinc Sheet can be applied to the top, sides, or bottom surfaces of concrete structures of various shapes and any sizes.
Zinc sheet requires minimal maintenance over its long life. If desired, performance can be monitored easily by on-site personnel. With a 250 micron zinc layer the calculated life expectancy will be 21 years.
|
|
|
Dedicated technical personnel around the world provide support to an extensive product portfolio. These products offer outstanding performance in formulations for the protective and decorative coatings industries. Our products strongly support applications such as wall paints, chemical resistant tank lining, flooring, coating on steel of ship and offshore structures as well as decorative exterior, hybrid systems and functional powders.
|
|
Pipe Coating FBE/3LPE/3LPP/Liquid Epoxy
Outside Diameter: ø 114mm - ø 1626mm (4"-64")
External Coating: FBE/3LPE/3LPP
Specification: CAN/CSA Z245.20:06 / DIN30670, CAN/CSA Z245.21:06, DEP
Capacity: 6km / day (Based on 20" O.D. 3LPE)
Internal Coating: Liquid Epoxy / FBE
Specification: API RP 5L2
Capacity: 2.5km / day (Based on 20" O.D. Liquid Epoxy)
PLEASE WRITE ALL ENQUIRIES IN ENGLISH ONLY! THANKS!
|
|
|
|
|
|
Elastomeric Coatings
- Chemical Resistant, Water-Borne, And Solvent-Based Coatings.
Lauren's chemical resistant coatings are solvent based ... water borne ...and will cover your most corrosive environment.
Coatings Designed For The Toughest Applications.
Fluorolast coatings are ideal for a wide variety of applications – especially those that require resistance to acids, bases or salts. Our fluoroelastomer coatings have been around over 15 years, and have a track record that is tried and true.
Fluorolast coatings are ideal for use in many industries … under-the-hood automotive, agriculture, petro and electro-chemical, construction, electric power and electronics, marine, pulp and paper, aerospace, military, and many more.
Fluorolast Coatings Can Be Applied With Ease.
Whether you brush, roll, spray or dip them, Fluorolast coatings will adhere to just about anything – properly prepared metal, concrete, paper, and even flexible substrates such as silicone rubber. And, our water-borne coatings clean up with soap and water.
Fluorolast provides a smooth, seamless finish with excellent abrasion resistance and a low coefficient of friction. The coatings are quick drying and deliver long-lasting protection even in the harshest conditions, and are virtually unaffected by weather or sunlight.
|
|
|
|
|
|
New Evolution™ coatings launched by Ferro Inorganic Specialties take today’s trendy metallic kitchen finishes to a higher level, with performance that maintains beauty to build long-term brand popularity. Unlike stainless steel, Evolution porcelain enamel coatings don’t show noticeable fingerprints or discolor from heat, and are resistant to stains, scratching, and chemical cleaners. In addition to providing a long-lasting, easy-care finish, Evolution coatings offer a cost-effective alternative to stainless steel and copper for manufacturers facing escalating metal prices.
Product differentiation is enhanced with Evolution’s nearly infinite range of custom metallic color possibilities. Evolution coatings are ideal for refrigerators, ranges, cooktops, sinks and plumbing ware. Washing machines may also benefit from Evolution’s stylish appearance as they increasingly move from the basement into living spaces.
Evolution coatings’ durability and resistance to heat, flames, staining, weather and corrosion make them a superior choice for grills compared to stainless steel, which is quickly marred in appearance with actual use. They also can add stylish metallic color possibilities to the exterior surfaces of designer cookware.
Ferro is the world’s leading porcelain enamel producer. Porcelain enamel was the Company's first product line, and Evolution is the latest innovation in the porcelain enamel family of products.
|
|
|
|
|
|
DURESIL EB : Bituminous epoxy paint for acid-resistant protection of concrete and steel surfaces. Use Duresil EB to coat structures that are below ground or to be permantly immersed in water, such as concrete and steel posts, sewers, purification plants etc. Duresil EB is a two-component paint formulated from special asphalt polymers and epoxy resins. To prepare, add Part B to Part A and mix thoroughly. Apply Duresil EB by brush or spray onto perfectly clean and solid substrates. After final hardening, Duresil EB forms a completely waterproof and vapourproof protective coating that is resistant to diluted acids and alkali, mineral oils, detergents, waste water, etc. Consumption 400-450 g/m2 per coat. Packaging 10 kg (A B).
MAPECOAT I24 : Epoxy paint for acid-resistant non-toxic coating of concrete surfaces. Mapecoat I24 is used to coat concrete surfaces designed for contact with food products e.g. wine, oil, confectionery industries, etc. Mapecoat I24 is especially recommended for coating reservoirs built to contain drinking water. Mapecoat I24 is a two-component epoxy paint. Prior to use the components must be thoroughly mixed until complete homogeneity is obtained. Characterized by a low viscosity Mapecoat I24 can be applied easily on perfectly clean, solid and dry substrates by brush, roller or spray. Once cross-linked, Mapecoat I24 forms a non-toxic protective coating that is waterproof and vapourproof. Coverage 400-600 g/m2 per coat depending on the type of substrate.Packaging 5 kg (A B).
|
|
|
Pyromark is a specially formulated coating that protects, decorates and color identifies metal surfaces subject to high temperatures. It offers extraordinary absorptivity and emissivity properties and is available in a variety of colors up to 2,000oF.
|
|
Easyline Edge Airflow Line Marking System
- Easyline Edge ‘traffic grade’ epoxy paint produces highly durable lines
- Suitable for marking factory floors, car parks, stores and warehouses
- Touch-dry in 10 minutes, reducing costly down-time
- Lasts 2.5 times longer than the best competitor* making it the most effective aerosol paint money can buy
- Complies with your legal obligations under The European Council Directive 92/58/EEC
- Available in 8 standard colours and 2 fluorescents
- Safe non-toxic formula
|
|
Scotch® Electrical Moisture Sealant Roll 06147
Scotch® 06147 rolls are self-fusing, rubber based thin insulating mastic compounds laminated to a flexible, all-weather grade PVC backing and are designed for moisture sealing of electrical connections up to 600 volts.
|
|
|
JELT COLOR LAQUE paintings are acrylic type solvents paintings. They are conditioned in aerosols and designed for marking, decoration, completion and final improvements. They are applicable on all supports.
|
|
Two-component anti-rust mortar for the protection of reinforcing rods.
Mapefer is a mixture of polymers in water dispersion, cement binders and corrosion inhibitors to apply on reinforcing rods when repairing concrete.
Mapefer is supplied as two pre-measured components which must be mixed without adding water or other ingredients.
Mapefer is applied by brush to the rods which must be free of rust, oil, grease and loose particles. The rods must be cleaned beforehand by vigorous scrubbing or sand-blasting.
After Mapefer has dried (minimum 4 hours), a repair mortar can be applied (Mapegrout range).
|
|
|
|
|
|
Master Bond Inc. offers a complete line of environmentally friendly conformal coatings that are easy to apply and provide superior protection for printed circuitry. These conformal coatings include very fast, one part, UV curing formulations, one and two part epoxies, one and two part silicones and a unique, cost effective latex system. These electronics coatings can be applied by spraying, dipping, flow coating and other conventional processing techniques. Master Bond Inc. will be glad to recommend specific products for your particular application.
Where rapid cure speeds are of prime importance, we offer one part, UV curable systems. For intricate parts with shadowed-out areas, we also offer special "dual cure" coatings which cure with UV light and with the addition of heat. Grades vary in viscosity, cure speed, flexibility, chemical and temperature resistance, electrical properties, color, etc. Special formulations are non-yellowing, optically clear, cryogenically serviceable, repairable and have exceptional dielectric properties. Ultra low viscosity coatings are available for confined spaces.
For easy application and reliable performance, select Master Bond for your conformal coating needs. Our wide range of compounds will extend the life of your electronic assemblies and provide protection against moisture, abrasion, solvents, and elevated temperatures. They are 100% reactive and contain no solvents or diluents. For over 30 years, manufacturing companies worldwide have depended on Master Bond's job-proven compounds.
|
|
HPA Conformal Coating
Ref: HPA
Resistant to mould growth
May be removed with solvents such as Ultrasolve (ULS)
UV trace for inspection
Excellent dielectric properties and with a wide temperature range
Approved to US MIL-1-46058C
China Military Approval GJB150 and GJB4 (Naval)
For professional use only
Acrylic Protective Lacquer
Ref: APL
Offers excellent adhesion to all substrates
UV trace for inspection
May be removed with solvents such as Ultrasolve (ULS)
Wide temperature range and good dielectric properties
May be soldered through, allowing for repair
For professional use only
|
|
- Description : Ø 4 / Ø 5
- Field of application : Riveted connections with high loading capacity
- Materials : Rust and acid-proof steel, free cutting steel, hardened aluminium heat, treated
- Description : Ø 4 / Ø 5 punched rivet/ self-riveting multi zone rivet
- Field of application : Riveted connections with high loading capacity
- Materials : Rust and acid-proof steel, free cutting steel, hardened aluminium heat, treated
|
|
| ... products without technical information |
| |
|
|
Varnishes, Paints...
