|
|
|
These work the same as our constant tension stand. They are designed to give constant torque at the surface diameter. As the diameter decreases, the tension remains constant.
|
|
Flexible Moulded Roll:
Ideal for Drum, Shoe and Band applications. Optional wire re-inforcement increases durability. Wide range of friction coeffients for stopping, holding and tensioning.
Applications include :
Cranes, winches, fork lift trucks,Oil drilling and production plants
Lift Brakes, Trains and transport systems
Flexible Woven Roll:
Ideal for marine winch and overhead crane applications. Available in 330mm wide rolls up to 38mm thick. Slit widths available at short notice.
Material can be manufactured with brass, zinc, steel or copper wire.
Also availble in flat sheet form and suitable for gear tooth applications.
Non metallic cotton fibre material available for food industry type applications
|
|
Industrial clutch parts have a fantastic range of Sintered friction pads for dynamic wind turbine applications. Please visit our website to view the different applications available.
|
|
|
Friction Technology manufacture sintered friction material for various applications including static & dynamic wind turbine, off highway, multi disc clutch, marine, leisure park rides, aerospace, agriculture.
|
|
Carbone Lorraine designs friction materials for braking applications.
The reliability and performance of these materials have enables the Group to equip the aerospace (Airbus), defense (helicopters, tanks and fighter aircraft), rail (TGV high-speed trains, road/rail systems) and racing car/ motorcycle/mountain bike sectors with Carbone Lorraine brakes...
|
|
|
Industrial friction pads and linings manufactured in organic moulded material. Available in either metallic & non metallic material with high friction coefficient for stopping or low friction coefficient for slipping applications.
|
|
|
Asbestos free brake linings and pads for off highway & industrial applications. Heavy Duty material formulations for extended pad wear. Anti squeal material available with or without wear indicators. Available drilled or in blank form.
|
|
Sintered friction pads for wind turbine applications.
Suitable for Dynamic & static operations (stopping & holding).
FTL materials are fully approved and have been designed to be stable at high temperatures whilst being kind to the mating surface.
|
|
|
ICP manufacture a range of paper / sintered friction and steel intermediate plates. The product range covers most industrial and off highway applications and is produced to high quality standards. Excellent availability and delivery including low volumes for special applications.
|
|
Clutch & Brake plates for applications including industrial & automotive.
FTL material is used by OEM's throughout the world. High friction materials in non asbestos organic designedv to give the maximum life without damaging the mating surface.
|
|
|
|
|
|
This product group includes all plate type friction components for clutches and brakes which possess driving teeth or lugs on their outer or inner diameters. Both plate and counterplate must be considered together, in general one plate with friction material works together with a counterplate of steel or cast iron.
The plates are the important functional element in every clutch and brake, and have been developed in many different ways since the early days of clutches and brakes. Ortlinghaus has played an important role in the total development of friction clutches, one example of its contributions being the patented, well known, sprung steel plate, known world-wide under the trademark 'Sinus'. The use for the first time of sintered plates in clutches, was also an important development. In the course of this development every relevant technological step forward - whether in frictional material, mechanical or heat treatment process -has been applied directly to the manufacture of the plates. As a result Ortlinghaus plates today contain the results of nearly one hundred years of research and development and represent a highly specialised component.
Supported by the experience gained over this long period of time, Ortlinghaus is today, able to provide a very comprehensive range of clutch and brake plates in a multitude of different dimensions, friction combinations and surface patterns. The number of standard plates listed in our catalogue is large and most of these are available ex stock, satisfying most of our customer requirement from this well proven range. Our customers benefit from quick availability angood price arrived at from volume production. Should it not be possible to solve a particular design problem with these plates, as listed in our catalogue, we are always ready to manufacture plates to meet specific customer wishes. In this area too our experience is extensive, every requirement can be satisfied with the aid of the most modern manufacturing techniques forms of oil channels.
|
|
|
|
|
|
Discs
For the drive technology, e.g. in clutches and brakes for gearboxes, wheel and chain driven vehicles, conveying systems and ships, discs and flat products in various designs up to a diameter of 1000 mm are manufactured in specific production plants.
The large variety of machining capacity, such as punching and broaching, thermal treatment, grinding combined with systematic quality assurance over the entire working process, provides optimum conditions for material and surface quality, hardness and stress relieving, parallelism and flatness.
Straight blanking punching technique
The market and consequently our customers and interested parties are continuously claiming on us:
* to increase the attractiveness of the products by involving new ways of thinking and working.
* to shorten the developing times
* to optimise the adaptation to the market requirements
To master these requirements of the global market we have made investments - among others - into the straight blanking punching technique.
This investment enables us to offer the following advantages:
* improvement of the cutting edges by up to 75%, consequently considerable increase of the bearing share compared with the conventional punching technique;
* variety of production possibilities in an economically large operation field between the mechanical production and the fine blanking technique;
* tool manufacture which is favourable in price
|
|
Friction cone manufactured in asbestos free woven and moulded material.
ICP155 cotton fibre material and ICP171 woven material available from stock.
Applications include overhead crane & centrifugal clutch.
|
|
|
Ortlinghaus supplies also long-range accessories beside the press clutches for many years for the efficient control and monitoring of the press drive: hydraulic control units with press relief valve and soft dome and - brake characteristic of hydraulic aggregates turning introductions electronic slip controls of questions it us after aud your press optimally co-ordinated accessories.
|
|
|
A large selection of friction rings and discs manufactured to order. Differing sizes and geometric characteristics. Friction material meets all European and US specifications. Applications include automotive & industrial. All material is asbestos free. Available with brass, copper, and steel impregnation.
|
|
Friction Technology Ltd can manufacture friction discs to order. A large selection of friction material with differing sizes and geometric characteristics. Friction disc for all types of industrial & automotive applications
FTL carry a large stock of flat sheet friction material from 2mm thick up to 60mm thick Discs can be turned, stamped or CNC machined to the customers specific requirements.
|
|
|
|
|
|
Friction Materials
Understanding friction’s role in motion control is critical to developing an effective brake system. Carlisle Industrial Brake and Friction is unique in its position as a leading designer and manufacturer of both friction materials and brake products. As an ISO9000 certified organization, Carlisle produces products for such varied applications as on-and off-highway vehicles, industrial equipment, lawn and garden equipment, and consumer appliances. Our friction engineers have over 100 standard formulations from which they begin the process of finding the right material for your application. We evaluate the clutch and brake design, as well as torque, fade and recovery requirements to select a product with the correct friction coefficient and performance characteristics for your needs.
* FieldPro Friction - semi-metallic compound that offers superior performance
* NF-119 - flexible, low friction, extruded material with very good durability.
* NF-336 - high-friction, high-strength product. It is rivetable and has excellent durability.
* NF-350 - extruded medium friction material.
* NF-507 - molded material with high friction and excellent durability.
* NF-511A - molded semi-metallic material with excellent durability at very high temperatures.
* NF-610 - very strong, rigid compound with medium friction.
* NF-612 - medium friction material produced as large flat boards.
* NF-707 - extruded friction material with medium friction.
* NF-780 - meduim friction, slab molded product.
* NF-782 - molded material with medium friction.
* NF-787 - molded material with medium friction.
* NF-916 - very low-friction, high strength material with excellent durability.
|
|
Brake pads for heavy industrial and off road vehicle applications.
Semi-metallic,non asbestos organic and sintered materials manufactured to order.
New carbon fibre material also available for some heavy duty application.
|
|
MICO has full power hydraulic brake systems with ABS and Traction Control. Systems are designed to handle up to eight channels of HABS control.
A full power hydraulic brake system with ABS can provide shorter stopping distances with improved vehicle stability and control during aggressive braking situations.
Hydraulic braking with Traction control can help maintain traction with the ground in poor environmental conditions.
Hydraulic brake systems with ABS and Traction Control can improve vehicle control and operator safety.
|
|
Kevlar based composite brake lining
Lasts up to 3 to 5 times longer than moulded organic friction materials
Use with winders, re-winders, sheeters, paper machines, roll stands, crane brakes and many more!
Never scratches or damages brake discs or brake drums
Ideal for both wet and dry applications - the coefficient of friction, and therefore torque and tension is higher.
Asbestos free - no dust problems
Ideal as a replacement for sintered material.
|
|
| ... products without technical information |
| |
|
|
Accessories and consumables for clutches / brakes
