 |
 |
Ultrasonic concrete test set CRONOSONIC M.A.E. S.r.l.
Cronosonic is an instrument for ultrasonic pulse velocity surveys allowing you to carry out measures through direct, indirect...
 |
  |
Inspection system for orthopaedic implants OrthoSURF VISUOL Technologies
OrthoSURF is a measurement system for the inspection of orthopaedic implants. This solution replaces subjective visual inspections by an automated measurement. Deflectometry is an innovative, highly robust, wide field optical measurement method. It can provide quantitative data for surfaces characterization...
 |
 |
Portable electronic feeler gauge 12.7 µm | GAPMAN®Gen3 CAPACITEC
With its user-friendly design enhancements, the "next generation" GAPMAN® Gen3 can be used to effectively measure...
 |
 |
Ultrasonic concrete test set V-Meter MK IV™ James Instruments
The V-Meter MK IV™ is widely used and accepted for quality control and inspection of concrete. It can measure and correlate concrete strength to...
 |
 |
Portable partial discharge tester PD-Smart Doble Lemke
The digital, highly advanced PD Measurement & Diagnostics System PD-Smart is developed for periodic on-line and off-line PD testing on power apparatus and high voltage insulation systems, for both in-house and on-site applications. It is fully compatible to DIN EN 60270, VDE 0434, ANSI and other IEEE-Standards. Following application fields are possible:...
 |
 |
Eddy current probe 0 - 25 mm, ø 8 - 50 mm SENSONICS
The proximity probe system is made up of an inductive sensor embedded in a stainless steel body with a fixed & tuned length of coaxial cable connected to a separate driver unit. The driver provides the excitation to the probe and generates a linearised...
 |
 |
Ultrasonic corona and arcing detector ULD-40 series SIBILLE FAMECA Electric
Ultrasonic corona/arcing detector USE : The UlD-40 accurately pinpoints and identifies corona effects and arcs that may be encountered on any type of high voltage installation simply by scanning around the suspected area. Display: 7-segment display in relative dB-mode Display Range: 90 dB Sensor: Built-in with 5 degrees...
 |
 |
Surface inspection system Surtronic 25 TAYLOR HOBSON
This new edition of the long-standing surtronic range brings a large display with the simplest of menu structures and most up-to-date parameters. Its mechanical rigidity and styli have firm reputation for giving reliable and repeatable...
 |
 |
Ultrasonic corona and arcing detector ULD-40 ndb Technologies
The ULD-40 is an ultrasonic detector designed for corona and arcing inspections for predictive maintenance in electric utilities. Corona effect occurs when electricity is discharges into the surrounding atmosphere form a high voltage source. Corona effects and electrical arcs in the air emit ultrasounds. The role of the ULD-40 consists of capturing emitted ultrasounds...
 |
 |
The key product is the PLURITANK range which, owing to its modular construction method, is designed to meet the many requirements associated with industrial batch cleaning. PLURITANK systems are an alternative to solvent-based plants, granting excellent cleaning without the associated health and safety issues. PLURITANK ultrasonic cleaning systems comprise a combination...
 |
  |
Portable partial discharge tester UltraTEV Detector EA Technology Ltd
The UltraTEV Detector™ is a hand held, dual sensor, Partial Discharge detector, which enables swift and simple ‘first pass’ identification of potentially damaging HV equipment faults and MV equipment faults before they become failures. •Fault detection before it leads to failure •Detect surface and internal PD activity instantly •Essential for personal safety •Easy to operate with minimal...
 |
 |
Gap and flush measuring instrument Gap and Flush / Step Gun Third Dimension
GapGun is a handheld optical measurement system designed for rapid, accurate, non-contact measurement of gaps, steps, radii, chamfers, scratches, angles and more. Designed for rugged shop floor...
 |
 |
Ultrasonic probe head for pipe wall thickness measurement SE SONOTEC Ultraschallsensorik Halle GmbH
The ergonomically-designed SONOSCAN wall thickness probes for non-destructive testing (NDT) are designed for use with our SONOWALL devices for the precise measurement of...
 |
 |
Optical surface inspection system KW TRIO Zumbach Electronic AG
Fault Detection, Surface Inspection KW TRIO Your demands for a reliable and flawless detection of extrusion faults and surface defects are ever increasing. This applies to extrusion, jacketing, enameling, drawing, and many other...
 |
 |
Ultrasonic testing unit apsonic GmbH
apsonic GmbH Handheld ultrasonic Frequency Tester. The Frequency Sniffer works with an integrated non-contact Probe. The Frequency...
 |
 |
Resonant frequency tester max. 90 000 kVA | MSR series HIPOTRONICS, Inc.
Hipotronics series resonant test systems provide undistorted high voltage at power frequency for testing high kVAR capacitive loads. It does so at a lower cost and...
 |
 |
Crack depth gauge TC-200 INNOVATEST Europe BV
TC-200 is used to measure concrete crack depth by applying principle of acoustic diffraction. It also can be used to measure propagation...
 |
 |
Eddy current non-destructive testing system DEFECTOMAT ECM Foerster Instruments
Reduction to the essential controls Test display using LED, bar graph or...
 |
 |
Monitoring system for sealing process Lepel
Cap Inspector The Cap Inspection System is specifically designed to be used with any induction heating cap sealing equipment. The advanced features and the flexibility of the system allow it to monitor a wide range of container sizes at various conveyor line speeds. The...
 |
 |
Ultrasonic NDT inspection device for pipes UltraPipe™ LaserLinc
In-Process Wall Measurement Adding to the success of the UltraGauge+™ ultrasonic measurement system, LaserLinc now offers the UltraPipe™, for in-process ultrasonic...
 |
 |
Ultrasonic bolt tension monitor boltight ltd
The echometer ultrasonically measures the elongation, stress and load in fasteners, quickly and accurately, and displays the result on an easy to read screen. The measurement is achieved by determining the change in the transit time, of an ultrasonic shock wave along the length of the fastener as...
 |
 |
Partial discharge monitor May Elektronik
Online monitoring, supervision and diagnosis of partial discharges Alarm given when limit value exceeded Available partial discharge sensors: Active search coils...
 |
 |
Infrared fault inspection system for cable 0.2 - 10 mm | LN Detector Beta LaserMike
The LN Detector series of dual-axis products are designed for detection of short-term faults in the diameter of the cable (lumps or neckdowns). LN Detectors are self-contained instruments with fast response circuitry and solid-state infrared light sources...
 |
 |
Proximity sensors work on the eddy current principle. A proximity system consists of an eddy current probe, extension cable and driver. A high-frequency RF signal is generated...
 |
 |
Portable partial discharge monitor PDA-IV™ IRIS POWER
The PDA-IV is a portable instrument specifically designed to monitor PD in hydro-generators equipped with PDA Couplers. The PDA-IV instrument...
 |
 |
Surface inspection system CombiSens ACP - advanced clean production GmbH
The CombiSens system offer the combined measurements of particles, dust and film like deposits on technical surfaces. Using the Glancing Light Technology, reliable reproducible and highly accurate measurement results are achieved without extensive test procedures using microscopes or in-direct-sampling...
 |
 |
*Specification of the striker blade and the sample containment cage conform to ISO 13 477 *Containment cages for test samples...
 |
 |
Eddy current non-destructive testing system QUEST Integrated
Magneto Optic Imaging technology has made major contributions to the nondestructive inspection of aging aircraft for cracking and corrosion. The MOI was developed for imaging anomalies in ferrous and non-ferrous...
 |
 |
Non destructive portable shearography testing device Dantec Dynamics A/S
Portable shearography (Q-810) Non-Destructive Inspection * Fast inspection of composite structures * Field inspection * Portable system * Easy operation The Portable Shearography System Q-810 is a fully portable and compact inspection...
 |
 |
Test system for bolt SCHATZ®-TEST SCHATZ
SCHATZ(R)-ANALYSE mobile This is a mobile ANALYSE bench for analyse of bolted fastenings, model nr. 5413-2777. Its rigid aluminium frame contains the measurement and...
 |
 |
Crack propagation tester for tubes (RCP) ISO 13477, ø 250 mm SCITEQ A/S
SCITEQ RCP small-scale steady-state test (S4 test) is developed for determination of arrest or propagation of a crack initiated in a thermoplastic pipe intended for the supply of gases or liquids at a specific temperature and internal...
 |
 |
Hand-held welding inspection system Servo-Robot
FEATURES Very user friendly thanks to its integrated video and alignment functions: point, shoot and measure Compares the measurements...
 |
 |
Computer controlled ultrasonic inspection system U. C. series Dukane Intelligent Assembly Solutions
Specialized for high-power ultrasonic systems Compatible with all Dukane metal...
 |
 |
Ultrasonic inspection system 0.5 micron | Echo™ Sonix
This industry-leading scanning acoustic microscope provides a universal inspection tool for packaged semiconductor development, production and failure analysis. With the ability to detect air defects...
 |
 |
Portable ultrasonic flaw detector ISONIC utPod Sonotron NDT
Miniature dimensions and lightest weight ever ISONIC utPod delivers full functionality of the top performance ultrasonic detector such as Bi-polar square wave pulser with tunable shape, pulse duration and amplitude (up to 300 V pp) and boosted leading / falling edges enhancing...
