|
|
Electronic devices for DIN-rail snap-on mounting
- Output multiplier OM 3
- Electronic position switch ERC
- Fiber optics signal converter (transmitter LWL-T / decoder LWL-D) |
|
The Vector 20 is a Frequency Converter with a modulated attachment, which in it´s basic offers excellent market value for goods by using simple applications.
With extra integrated modules it can be alternated for a controlled drive with vector-control or upgraded to a positioning type. The device shows a protection class of IP 20.
The Frequency Converter VECTOR 20 is available from 0.09KW till 3KW single phase and from 0.75KW till 3 KW three-phase. |
|
- From 0.1 to 480kW, variable and/or constant torque
- Control V/F, vectorial and sensorless.
- Specific software designed for pumping installations and funs.
- Starvert series iE5, iC5, iG5A, iS5, iP5A, iH
- Precision, flexibility and easy operation control
- New iE5, optimum solution for small size motor control |
|
FC750 is a very simple, yet efficient Plug & Play frequency converter for the growing market in simple speed control of 3 phase asyncronous AC motors. The FC750 has been specifically developed for the continuously demanding market involving seamless speed control of especially Fans, pumps, ventilators and any simple AC motor application FC750 is an totally integrated and encapsulated frequency converter, with a very simple Interface,, and a very sophisticated set of fault control systems, that will ensure the motor to RUN, even in extreme conditions. The IP54 or higher cabinet will ensure that there will be no need for an extra Cabinet, as usually with FC´s. The integrated EMC filter in the FC750 makes it an ideal solution for many applications, where Plug & Play is a first issue. No need for an external filter, no need for an exernal cabinet, no need for any "irritating" setup menus,, just plug it in, and you have a motor that spins as nice as with any other converter.
FC750 has as standard a 0-10 / 2-10V input control range with an auxilary START/STOP signal. Just a wire to the Gnd to make it spin. Also, there is an extra signal, that could make the motor turn in the opposite direction, just connect DIR to Gnd,, if it is needed. FC750 also has an "inbuild" motor protection, that will ensure that motors do not get overheated. The function can be adjusted in 9 steps from the Dipswitch. DIP=0 means NO protection. FC750 will stop the motor and activate the ALARM relay when current has been exeeded for ten times.
FC750 is not the controller for machinery etc, but is meant as a highly integrated power device for small AC motors. Fans, Pumps etc will benefit of this compact Controller. Also, applications requiring simple installation and a high grade of encapsulation will have to contact Motron for more info.
|
|
The VS1SP AC Drive uses a traditional inverter V/Hz control method. Its easy setup, quick startup, and right-out-of-the-box operation make it among the most popular variable speed motor controls. It is ideal for applications where multiple motors are operated simultaneously from one motor control, including pumps, fans, and general machinery applications.
|
|
| A full series of flexible solution drives that are versatile and extremely easy to use, featuring control for high performance and unbeatable advantages in their scalability and compact size. |
|
| A full series of flexible solution drives that are versatile and extremely easy to use, featuring control for high performance and unbeatable advantages in their scalability and compact size. |
|
Assets of the IndraDrive range:
·Programmable automat integrated according to standard IEC 61131-3
·Functions of safety integrated into l’ drive according to the standard EN-954-1, category 3 (not of components of external monitoring nor turning via the order)
·Only one platform hardware for the functionalities d’ axes and frequency converter
·Programming conforms to standard IEC 61131-3 with l’ helps of the PLCopen blocks
·Re-use of the programmes of cycles in the new control device Rexroth IndraMotion for the applications of handling
·More than 100 technological functions
·Assistant DRIVETOP for a fast and interactive startup with function personalization for l’ fast adaptation of the parameters d’ control
New function:
L’ integrated tool for preventive maintenance
Features:
·Beach of power of 1,5 kw to 120 kw
·Communication: interfaces SERCOS, PROFIBUS, PROFINET, CANopen, DeviceNet, analogical and parallel.
·Basic functionalities: block mode of positioning, l’ control of position, speed and couple
·Extension of the functionalities: correction of defect d’ axes, functions of pin, synchronization d’ axes, limps with electronic cams and technological functions
|
|
Demag Dedrive Pro frequency inverters:
Our Dedrive Pro frequency inverters are high-performance components ranging from 1.5 to 560 kW for 380 to 690 V systems. They are the solution for a variety of requirements and firmly established their position in the industry. We have developed sophisticated extended functions for special requirements in your company - for example special crane functions. |
|
Frequency inverters are used for electronic speed control on machine drives. The needs of the market are wide and varied, and we can offer a homogeneous range of standard products for everything from simple speed control to complex applications with high requirements in respect of drive behaviour and functionality. Our drives are reliable in respect of operation, flexible in terms of application, easy to commission and meet high standards of quality. We can provide a solution to suit any requirement in the power range between 0.25 and 400 kW.
|
|
Variable Speed drives (VSD)/ Inverters
A wide range of inverters, either single or 3 phases, with power from 0.37 to 450 KW, input voltages from 200 to 480 Vac, with variable and/or constant torque.
Specific software designed for pumping installations and funs. Automatic process controls with the possibility to control two motors independently with only one inverter.
|
|
Numerous basic features
The NORDAC SK 700E is a universal type of frequency inverter fitting every application. From simple speed control to complex positioning jobs, any specific modular option that may be required is conveniently integrated inside the housing.
A high performance is ensured even by the basic functions: no-sensor current control for torques of up to 400 %
integrated line filter for a class A EMC standard (up to 22kW)
4 parameter sets, to be switched without disconnection
a braking chopper for dynamic electrical braking preventing wear of the brakes
the modular construction allows for customizing the unit with no extra space being required
automatic identification of the modules
connection to all current bus systems |
|
| The NORDAC trio SK 300E is a combination of geared motor and highly functional frequency inverter which enables process-oriented, decentralized system configurations to be implemented very conveniently. Designed to ensure maximum ease of handling and operation the inverter is user-friendly in every respect. The inverter is provided with what can be described as an "electronic type plate" which the motor will read and permanently store with the effect that the inverter data are not lost to the motor even if the inverter is removed. As the inverter can be upgraded with a number of modules within the scope of a well thought-out concept, appropriate control components are available to establish the optimal configuration for any process to be controlled. |
|
The NORDAC SK 500E by NORD - an inverter of (almost) unlimited possibilities!
The SK 500E frequency inverter in book size allows for intelligent configurations to be implemented at a very favourable price.With its high functionality and numerous options the scope of possible uses is virtually unlimited.
Even the basic type has got a multiplicity of features sufficient for the majority of requirements:
four sets of parameters switchable online
sensorless vectorial current control ensuring torques of up to 400%
automatic motor parameter identification
5 control inputs to be parameterized for various digital and analogue control functions
2 digital outputs, 1 analogue output
integrated braking chopper and control of an electromagnetic motor brake
PID controller and process controller
RS 232 & RS 485 interface
32 fixed frequencies (binary-coded)
motor potentiometer function
limit switch control
flying start
Wherever drive control is of the intricate kind the SK 520E with its extra features and options will cope: encoder interface (TTL)
CANopen interface
2 additional digital inputs
2 additional digital outputs
integrated safety features as per EN 654-1 cat. 3. Stop categories 0 and 1 to be available soon |
|
For polyphase motor jusqu’ to 0,75 kw
Controlled by microprocessor, method PWM
Entry in single-phase current (or three-phase current according to version)
Exit three-phase current
Exit preset 0,5 - 50 Hz (320 maximum Hz. adjustable)
Inversion - braking dynamic
Posting 4 digits
Integrated potentiometer (or deportee)
The variable frequency converter series 8001 has
summer conceived to answer a multitude
d’ industrial applications.
Compact and quiet model, technology IGBT,
its use is extremely simple thanks to
l’ control unit integrated.
This converter is |
|
With a range of powers, functions and characteristics unequalled, the variators and starters Allen-Bradley and Reliance are ready to meet all your requirements in automation. Since the small scalar variators until the integrated great systems, the whole of the products of variation speed turnover and c.c Allen Bradley and Reliance bring to your engines flexibility, the reliability and the precision of order necessary to the progression of your company.
|
|
"Unit modularity" and "smaller dimensions" are two of the most important criteria when selecting a frequency inverter for a specific application. SEW-EURODRIVE is aware of these requirements and, as a result, has designed a compact and economic solution with its target-specific development of the MC07 series: MOVITRAC® B – the next generation frequency inverter.
Your advantages
High-quality system components
High power range across all supply voltage ranges
High EMC protection
Simple operation and startup
Excellent price/performance ratio
|
|
| A wide range of Sumitomo frequency inverters are available. From compact drives for OEM applications to complex governors with several modes and numerous programmable digital and analog in/outputs. Capacities from 0.37 kW to 55 kW are available in all standard voltages and frequencies. All our drives are manufactured according to the global standards (UL, CUL and CE) and ensure easy, reliable operation. Please contact us for complete specifications and project support. |
|
The Vacon NXS is a compact AC drive in the power range of 0.37-560 kW and supply voltages of 208-690 V for heavy use in machines, buildings and all branches of industry.
The robust design incorporates effective protection against supply network disturbances. Trip-free operation is also guaranteed due to sophisticated motor control principles and motor/drive protection features, component selection and effective cooling. |
|
The frequency inverter programs ECO-line, OPTI-line and PROFI-line consistently follow the same principle in the range of 0.2 to 90 kW as the Watt Drive modular drive systems.
These frequency inverters distinguish themselves through their excellent control features, compact size, ease of use and very good communication skills.
The differences in the three programs are mainly found in the control features and the related dynamics, starting torque and scope of application.
The L types are controlled by V/f characteristics and the V types are vector-controlled frequency inverters, while the P series is outstanding in its decentralized intelligence, for example for positioning.
With this program extension, Watt Drive is able to offer a complete range of modular drive control units and the most cost-effective drive solution for any requirement, from simple control and drive tasks to the control of top dynamic processes and positioning. |
|
CFW 08
• Power rating: 0.25 to 20HP (0.18 to 15kW)
• Power supply: 200…240V and 380…480V
• V/Hz (scale) or sensorless vector control
• Sinusoidal PWM modulation – Space Vector Modulation
• EMC filters (built-in)
• Modbus RTU communication (built-in), CANopen, DeviceNet and Profibus-DP (optional)
• PID regulator
• DSP control
• Remote keypad (HMI)
CFW09
Power Rating: 1.5 to 1500 HP (1.1 to 1250 kw);
Power Supply: 200…240 V, 380…480 V and 500…600/690 V;
V/Hz (Scalar), sensorless vector or closed loop vector control;
Optimal braking;
32 Bits RISC microprocessor;
Regenerative converter (optional);
EMC filters (optional);
Fieldbus communication: PROFIBUS-DP (optional), Device Net (optional),
Device Net Drive Profile (optional), METASYS N2 Johnson Controls
(optional) and MODBUS RTU (built-in);
IP 20 enclosure up to 500 HP (315 Kw);
PLC and positioning control functions board;
Optimal flux function - a unique solution providing rated torque at low
speeds without forced ventilation on motor oversizing.
CFW10
• Power rating: 0.25 to 3HP (0.18 to 2.2kW)
• Power supply: 110…127V and 200…240V
• Rated output voltage: 200…240V
• Single phase power supply
• Sinusoidal PWM modulation – Space Vector Modulation
• Latest generation IGBT modules and electronic circuits with SMD components
• DSP control
• Compact dimensions, simplified installation and operation
• Speed adjustment via potentiometer is available |
|
Our digital AMKAVERT frequency inverters offer compact dimensions, a variety of functions and high operating comfort in a power range from 0.2 kW to 315 kW.
The efficiency and flexible application options make AMKAVERT an intelligent component of your drive system. |
|
Design Digital converter with d.c. link for general industrial applications
Main applications all DC motor applications
Special applications -
Performance range 0,3 - 250 kW
|
|
Variable Speed Drives
GE Consumer & Industrial introduces a complete new line of feature packed drives. |
|
|
|
AC drives
