|
|
DMV 2322 - DMV 2342 Series
The DMV 2322 and DMV 2342 drives are designed to supply separately excited continuous current (dc) motors from a three phase ac supply between 220 and 480 V, ±10 %.
The drives control armature current and speed, and the induced current if the drive is equipped with a variable excitation supply (option for ratings greater than 210 A).
Totally protected against disturbances related to the application, to the motor or to the mains supply, they can display a simple and rapid diagnosis of their operating state.
Entirely digital they are programmable by the user.
The DMV 2322 is a 2 quadrant unidirectional drive.
The DMV 2342 is a 4 quadrants drive, with energy recovery on the mains when operating as a professional generator.
DIGIDRIVE Series
DIGIDRIVE is an AC industrial inverter drive used to supply asynchronous motors.
The drive can operate in closed loop flux vector control mode (SE & SK) or according to U/F control (SK).
With its calculation power, the drive separately controls the magnetising current and the active current of a standard asynchronous motor.
The rotor speed and position are calculated to control the motor torque and speed.
This operating mode is used, in closed loop, to obtain very high performance levels and is thus suitable for the majority of applications. |
|
EBL-H-50-03 Professional amplifier (Hall Sensor)
Specially engineered for Portescap high performance Manufacturer of brushless motors, the EBL driver is ideal for applications where efficiency, high acceleration or safety features are key. Clearly identified inputs and outputs allow for easy startup.
Flexibility: Fully programmable features allow for maximum performance in each specific application. With a broad supply voltage range, this driver is capable of controlling the smaller 13 mm BLDC motors to the larger 30 mm motors.
Protection: Thermal, short and over current protection are included. An optional feature allows for current limitation at start up to protect surrounding equipment (i.e: the life of a battery pack in a medical manufacturer of respirator will be greatly improved). The internal current ripple control minimizes increases in motor heat.
Electrical Characteristics
Supply Voltage 5.5 - 50 V
Current Output 3 / 12 Amps
Speed Range 90,000 (2 poles)
|
|
AC SERVO DRIVE
15A to 300A
1 x 230V AC - 3x 400V AC
- Analog input
6 control modes (Position, Speed, Torque, 3 switching modes)
Easy operation
- I/O Input (254 positions)
- Field Bus interface: Can Open, Sercos, serial bus (GA1060/RS485)
DC SERVO DRIVE
20 to 30A
50VDC & 140VDC
|
|
With their cutting edge technology, the Gefran-Siei ARTDrive series of inverters incorporates all the needs of systems integrators, panel builders and machine manufacturers to guarantee the best control solutions in modern industrial automation systems.
A wide range of motor ratings, power supply specification settings and sector-specific configurations make this a universal solution for all control architectures. |
|
Vacon variable speed Alternating current drives
- a perfect choice
To choose the right Vacon variable speed AC drive for your needs, the experienced Vacon personnel is pleased to assist you in making the right decision. We know there are several issues to consider. Therefore, we have the know-how and willingness to help you to concentrate on the essentials.
What kind of an AC drive do you need?
|
|
A long-time leader in providing reliable, power control solutions, Rockwell Automation® offers an industry-leading family of drives. Designed for powerful performance and flexible control, the Allen-Bradley® PowerFlex® family of drives is geared for motor control applications ranging from low to medium voltage.
PowerFlex drives meet industry needs of solution providers, OEMs and end-users for applications ranging from 0.2 kW (0.25 hp) to 6,770 kW (9,000 hp). Our Component Class drives offer cost-effective motor control, geared for machine-level and stand-alone applications. Our Architecture Class drives provide superior application flexibility and control system integration for a broad range of power offerings. |
|
AF-300 G11 General Purpose Drive
The AF-300 G11™ drive brings the latest power and control technology to general industry, constant torque applications. New soft-switching technology lowers installed cost by allowing the AF-300 G11 drive to be used with a standard non-inverter duty motor in many applications.
Features and Benefits:
Pre-loaded motor parameters and factory defaults
Out-of-the-box installation
Dynamic torque vector control
Smooth, precise, and efficient motor operation
Modbus RTU or other optional protocols
For simple connection to industrial process controller
Pattern Operation
Allows up to seven stages of pre-programmed accel/decel and speed patterns for batch process
New generation IGBT
Reduced electrical noise and less voltage spiking
Online tuning
Provides continuous check for variation of motor characteristics during running of high-precision speed control
Intelligent and back lit display keypad
Accepts commands from local or remote keypad or from facility management systems
Has copy function in six different languages
Applications:
General industry machinery
Commercial consumer
|
|
UNIDRIVE SP Series : 0.75 to 132 kW
DIGISTART is a multi-function electronic system with a microcontroller and thyristors, designed for use with all 3-phase squirrel cage induction motors.
UNIDRIVE SP is, in standard form, an a.c. drive designed to supply either, asynchronous drives, with or without professional encoder or asynchronous (brushless) drives. Through parameter settings UNIDRIVE SP can be configured in different functioning modes as follows :
- Flux vector contol without feed back Due to its calculative power, the drive controls separately the magnetising current and the active current of a standard asynchronous drive. The speed and the rotor position are calculated in order to control the torque and the speed of the drive.
- Flux vector control with feed-back Using this mode on a standard asynchronous drive allows more precise management of torque and speed of the drive through a higher speed range (including zerol speed) with greater dynamic performance.
- Operation of an autosynchronous motor Using this mode with an autosynchronous motor (motor with permanent magnets on the rotor) and equipped with an incremental encoder, SSI, SinCos, EnDat or with a resolver allows very high dynamic performance e.g. for driving shafts. |
|
Sumitomo HF430 AC Drive incorporate a three-drives-in-one design philosophy. Simple V/F control allows a 10:1 constant torque speed range and is suitable for many applications. Switch to Sensorless Vector (SLV) contol by simply changing a parameter value. SLV control offers a 120:1 constant torque speed range and ±0.5% speed regulation.
Closed-Loop Vector (CLV) control is available by installing a low-cost professional encoder feedback card and changing a parameter value. Of course, the motor must be equipped with a suitable encoder. CLV control dramatically improves performance. A 1000:1 constant torque speed range with ±0.05% speed regulation can be achieved. In addition, Closed-Loop vector control can produce full torque at zero speed, if necessary.
HF430 Industrial ac drives are available from 1/2 to 75 HP, 200-240V and 1 to 75 HP, 380-480V and are suitable for 50 Hz or 60 Hz operation.
|
|
HIDRIVE: Drive for Brushless and Induction motors
High performance drive
Brushless and asynchronous motors control
From 2 to 150Arms continuous current
Resolver, incremental/less wire professional encoder, SinCos+EnDat and SinCos Hiperface absolute encoder feedback
Positioner with speed trapezoidal profile
Digital lack with variable ratio and phase correction
Electronic cams
Built-in PLC SUPPLIER with ladder and instruction list programming language (256 steps)
On-board full IEC1131 programming environment
CanBus standard (CanOpen DS301 or SBCCAN)
Expansion boards available for Profibus-DP and I/O expansion |
|
AF-300 G11 General Purpose Drive
230V: 1/4-125HP; 460V: 1/2 - 600HP. The AF-300 G11™ drive brings the latest power and control technology to general industry, constant torque applications.
AF-300 P11 General Purpose Drive
230V: 1/4 -150HP; 460V: 1/2 - 800HP. The AF-300 P11™ drive brings the latest power and control technology to pump, HVAC, and other variable torque applications.
AF-300 P11 HVAC Panel
208V: 3 - 125HP; 460V: 3 - 300HP. GE's redesigned AF-300 P11 HVAC Panels are ideal for HVAC professional fan and pump applications in office buildings, schools, universities, hospitals, retail stores and industrial facilities.
AF-300 HC 18 Pulse Drive
460V: 40-800HP (600hp CT). This "Harmonic Control" Low voltage drive offers an IEEE 519 Compliant 18 Pulse Drive with the proven reliability and Soft Switching Technology found on the latest series of AF-300 Drive Products.
AV-300i High Performance Drive
460V: .75-200HP. Performance and flexibility in a compact package that suits your application. With innovative modes of operation like sensorless flux vector control and scalar V/Hz, the AV-300i is the perfect solution for any control system.
RS-300 Regenerative Source
480V:185 - 1050A. The RS-300™ is a regenerative three phase AC/DC industrial converter intended to supply constant DC link voltage to AV-300 series industrial inverter and other brands of inverters.
Prior Generation Drives
Parts information and documentation for prior generation drives.
Medium Voltage AC
Medium Voltage Manufacturers of ac drives provided by GE TM Automation Systems. |
|
Easy to plug, and easiest to play
The Vacon NXL is a powerful and compact Industrial ac drive for industrial and residential purposes in the power range from 0.25 to 30 kW.
The space-saving bookshelf design with high protection classes, versatile control and programming capabilities offer an optimal solution for all operating environments. Installation, connection and commissioning procedures are extremely quick and convenient with instructions attached to the unit.
Thanks to an extremely effective design, everything is included as standard. The units can be installed on the wall without additional industrial cabinets because of high protection classes. The Radio frequency interference filters and professional brake choppers are always integrated. The standard units fit almost everywhere in both industrial and residential areas. The integrated AC choke is the most effective way to protect the drive against the overvoltage spikes and to reduce the stress on supply transformers, professional cables and fuses.
More features, more performance
No additional cabinets required
Everything integrated as standard (dust/water protection, RFI professional filter, AC choke, brake chopper)
Easy to install, easy to use
Low noise (both drive and motor)
Large amount of control possibilities (via I/Os, field buses or display panel)
Large amount of features (e.g. fully programmable I/O, autoidentification, Pid control, flying start)
High performance
Convenient installation and programming
The installation and programming is extremely quick and convenient with the help of the credit-card-size Quick Guide. The programming is often just a selection of load type and fine-tuning of the motor nominal current and speed.
|
|
Easy to plug, and easiest to play
The Vacon NXL is a powerful and compact Alternating current drive for industrial and residential purposes in the power range from 0.25 to 30 kW.
The space-saving bookshelf design with high protection classes, versatile control and programming capabilities offer an optimal solution for all operating environments. Installation, connection and commissioning procedures are extremely quick and convenient with instructions attached to the unit.
Thanks to an extremely effective design, everything is included as standard. The units can be installed on the wall without additional professional cabinets because of high protection classes. The Electromagnetic interference filters and professional brake choppers are always integrated. The standard units fit almost everywhere in both industrial and residential areas. The integrated AC choke is the most effective way to protect the drive against the overvoltage spikes and to reduce the stress on supply transformers, professional cables and fuses.
More features, more performance
No additional cabinets required
Everything integrated as standard (dust/water protection, RFI professional filter, AC choke, brake chopper)
Easy to install, easy to use
Low noise (both drive and motor)
Large amount of control possibilities (via I/Os, field buses or display panel)
Large amount of features (e.g. fully programmable I/O, autoidentification, Pid control, flying start)
High performance
|
|
With ECODRIVE Cs, Rexroth proposes a generation of servos AC in the beach of low power from 100 to 750 W.
The compact variators are satisfied d’ a mono and three-phase network with a tension d’ entry being able to reach 230V.
Teams of modules of communication to interface SERCOS, Profibus DP, DeviceNet or analogical and parallel interface, they are ideally adapted to l’ use in systems with multiple axes with interconnection and can be also used in so much qu’ intelligent single axis connected by bus of standardized ground. The software of startup intuitive on basis Windows, DriveTop, allows l’ user to parameterize the apparatuses easily. L’ interface SERCOS allows moreover l’ use without problem in the control devices SYNAX, VISUALMOTION, IndraMotion MTX and in the ordering of industrial robot RHO 4.
|
|
compact design
easy commissioning and programming
flat built-under mains professional filters available
IGBT power stage
detachable operating unit
rotating field frequency up to 650Hz
integrated Pid regulator
integrated PLC MANUFACTURERS
optionally with RS 232/485 interface
integrated braking chopper
integrated mains filter (class A)
integrated setpoint potentiometer manufacturers
6 multi-functional inputs
2 multi-functional outputs
for mounting onto Din track (up to 4kW)
degree of protection: IP20
|
|
AF-300 C11 Mini-Micro Drive
The AF-300 C11™ drive is designed for use in small machines such as professional fans and conveyors supplier, as well as other machines in which motor speeds can vary. The AF-300 C11 series is available in thirteen models, from 1/8 to 5 hp, allowing you to select the model that best suits your application.
Features and Benefits:
Built-in manufacturer of terminal block
Requires only power and motor connections for use
Easy-to-use keypad panel
Program drive and set output frequency
9Quick response time
Reliable operation against load fluctuation
elf-diagnostics
Shut-off protection and fault failure messages
Standard frequency setting POT
Allows quick adjustments
Applications:
Fans
Conveyors
|
|
The Vacon NXC industrial cabinet drive is compact and well tested, fully utilizing the flexibility of the Vacon NXP drive.
The Vacon NXC is designed to meet the most demanding requirements on flexibility, robustness, compactness and service-friendliness. It is a safe choice for any application.
Easy ordering
The Vacon NXC incorporates the frequency converter and optional items such as mains switch, contactor, control options as well as output fi ltering in one compact unit which is easy to install and service. Ordering is made easy by integrating the Vacon NXC enclosure options into the typecode to which they are appended with “+” codes. The Vacon NXC cabinet drive is compact and well tested, fully utilizing the fl exibility of the Vacon NXP drive. The Vacon NXC is designed to meet the most demanding requirements on fl exibility, robustness, compactness and service-friendliness. It is a safe choice for any application.
|
|
|
|