|
|
|
|
|
|
Easy to plug, and easiest to play
The Vacon NXL is a powerful and compact AC drive for industrial and residential purposes in the power range from 0.25 to 30 kW.
The space-saving bookshelf design with high protection classes, versatile control and programming capabilities offer an optimal solution for all operating environments. Installation, connection and commissioning procedures are extremely quick and convenient with instructions attached to the unit.
Thanks to an extremely effective design, everything is included as standard. The units can be installed on the wall without additional cabinets because of high protection classes. The RFI filters and brake choppers are always integrated. The standard units fit almost everywhere in both industrial and residential areas. The integrated AC choke is the most effective way to protect the drive against the overvoltage spikes and to reduce the stress on supply transformers, cables and fuses.
More features, more performance
No additional cabinets required
Everything integrated as standard (dust/water protection, RFI filter, AC choke, brake chopper)
Easy to install, easy to use
Low noise (both drive and motor)
Large amount of control possibilities (via I/Os, field buses or display panel)
Large amount of features (e.g. fully programmable I/O, autoidentification, PID controller, flying start)
High performance
Convenient installation and programming
The installation and programming is extremely quick and convenient with the help of the credit-card-size Quick Guide. The programming is often just a selection of load type and fine-tuning of the motor nominal current and speed.
|
|
|
|
|
|
|
OS3 drives can be directly connected to the 3 phase supply network. They operate with a nominal 400V to 480V AC power input. This characteristic allows the product to be used in applications in a variety of geographical locations without need for a transformer to adapt to the local power source. The drives have an internal supply derived from the 3 phase to feed the control’s electronics. This feature allows dynamic breaking in the event of interruption of the power network. The control’s electronics are also supported by an external 24v d.c. supply. During the dynamic breaking phase, energy accumulated by the load is dissipated across internal breaking resistors. For extremely heavy work cycles an external breaking resistor can be connected in place of, or in parallel with the internal resistors. In common with most drives, the high-tension bus is accessible through a connector, this allows the use of external supplies containing breaking resistance. Various motors with different technologies can be controlled, such as permanent magnet motors, brush-less motors, induction motors and variable reluctance motors. The standard transducer is a sinusoidal encoder (Sin-Cos). Programmable inputs and outputs increase the drive’s flexibility. The OS3 family of drives is available in 2 different families : family A includes three power size 3/6A , 5/10A and 9/18A connected to the three-phase power supply with a voltage level between 220 VAC and 480 VAC +-10%. Family B includes three power size 5/10A , 10/20A and 15/30A connected to the three-phase power supply with a voltage level between 380VAC and 440VAC +-10%.
|
|
|
|
|
|
Easy to plug, and easiest to play
The Vacon NXL is a powerful and compact AC drive for industrial and residential purposes in the power range from 0.25 to 30 kW.
The space-saving bookshelf design with high protection classes, versatile control and programming capabilities offer an optimal solution for all operating environments. Installation, connection and commissioning procedures are extremely quick and convenient with instructions attached to the unit.
Thanks to an extremely effective design, everything is included as standard. The units can be installed on the wall without additional cabinets because of high protection classes. The RFI filters and brake choppers are always integrated. The standard units fit almost everywhere in both industrial and residential areas. The integrated AC choke is the most effective way to protect the drive against the overvoltage spikes and to reduce the stress on supply transformers, cables and fuses.
More features, more performance
No additional cabinets required
Everything integrated as standard (dust/water protection, RFI filter, AC choke, brake chopper)
Easy to install, easy to use
Low noise (both drive and motor)
Large amount of control possibilities (via I/Os, field buses or display panel)
Large amount of features (e.g. fully programmable I/O, autoidentification, PID controller, flying start)
High performance
|
|
|
|
|
|
AF-300 Mini Micro Drive
5540The AF-300 Mini Drive is a compact, but powerful and easy to use AC variable frequency drive. The drive is available in its standard configuration that includes built-in dynamic braking control, single turn potentiometer for speed reference and LED display.
Features and Benefits
* Simplified dynamic torque vector control
Provides step response and low speed control
* High starting torque
Capable of carrying heavy loads like conveyers and mixers
* Compact design
Fit easily into a limited space
* Available with built-in EMC Filter
Provides CE Compliance in compact design
* Automatic energy-saving function
Reduces motor loss and electric costs
* Predictive maintenance features
Drive cooling fan run time and alarm at recommended replacement and Internal Capacitor predictive alarm calculates expected life and can alarm for recommended replacement
* PID control function
Decreases difference between measured value and target value during instrumentation control of fans and pumps
* Soft-switching IGBTs
Allows use with standard general purpose motors
* Optional Modbus RTU RS485
Allows low cost system integration using the RTU protocol with the addition of the RS 485 Option Card
* Inrush current control circuit
Allows use of smaller upstream peripheral equipment such as fuses, circuit breakers, and contactors
* Compliance with major international standards
Assurance of smooth integration with global equipment requiring CE, TUV, UL, CUL
|
|
Name: Frequency Inverter, Inverter, AC motor Inverter, AC Drives
Power range: 0.2 - 1.5KW
Input voltage range: 220V± 20%, 380V± 20%, 415V± 15%
Output frequency: 0 - 400Hz
Features for EDS800:
1. Can make up of inverter network independently and the inverter can set to be mainframe or sub-device;
2. With speed adjusting potentiometer, panel can be connected to other devices;
3. Small volume, length(11.25cm), width(8.45cm), height(14.15cm);
4. RS485 communication port;
5. Pulse/analog input output channels;
6.16 segments speed control;
7. Many kinds of running frequency/command provision channels;
8. Space voltage vector SVPWM;
9. Can lock part or whole key-press(no lock for analog potentiometer);
10. Can realize copy for parameters by using long-distance keyboard;
11. Hi-performance isolating OC output, AC or DC load of 220V/0.5A can be connected;
12. Have traversal function for textile machine, can be widely applied to all kinds of spinning devices;
13. Built-in user's timer/counter;
|
|
Frequency inverters for 3-phase asynchronous motors from 0.18 to 2.2 kW
Description
100... 120 V / 200... 240 V single phase
200... 230 V 3-phase, 50/60 Hz
Speed regulation by flux vector control
Speed range from 1 to 20
Protection of drive and of motor
Robustness even in severe environments from -10 to +50°C
Through wiring and connection using captive screws: simple replacement of electromechanical solutions
Compact, side by side mounting
DIN rail mounting possible
Integrated class B EMC filter or available as an option
Very low leakage current of drive compatible with 30 mA differential circuit-breaker for assured protection of personnel
Baseplate mounted version available
|
|
The Vacon NXC cabinet drive is compact and well tested, fully utilizing the flexibility of the Vacon NXP drive.
The Vacon NXC is designed to meet the most demanding requirements on flexibility, robustness, compactness and service-friendliness. It is a safe choice for any application.
Easy ordering
The Vacon NXC incorporates the frequency converter and optional items such as mains switch, contactor, control options as well as output fi ltering in one compact unit which is easy to install and service. Ordering is made easy by integrating the Vacon NXC enclosure options into the typecode to which they are appended with “+” codes. The Vacon NXC cabinet drive is compact and well tested, fully utilizing the fl exibility of the Vacon NXP drive. The Vacon NXC is designed to meet the most demanding requirements on fl exibility, robustness, compactness and service-friendliness. It is a safe choice for any application.
|
|
SIMOVERT MASTERDRIVES/SIMODRIVE 611 universal
Standard drives with integrated safety relay
Together with the Siemens synchro-servomotors or asynchro-servomotors, the frequency converters SIMOVERT MASTERDRIVES and SIMODRIVE 611 universal offer powerful and cost-effective drive solutions for all industrial sectors. Their compact and modular design makes them ideal for a wide range of applications, such as applications in the printing, packaging, textile, wood and glass industries.
The standard drives support a Safety start inhibit with a safety relais integrated in the frequency converter. A "Safety stop" function can be implemented when this is used in conjunction with an external RC circuit .
|
|
A full series of flexible solution drives that are versatile and extremely easy to use, featuring control for high performance and unbeatable advantages in their scalability and compact size.
|
|
Frequency inverters are used for electronic speed control on machine drives. The needs of the market are wide and varied, and we can offer a homogeneous range of standard products for everything from simple speed control to complex applications with high requirements in respect of drive behaviour and functionality. Our drives are reliable in respect of operation, flexible in terms of application, easy to commission and meet high standards of quality. We can provide a solution to suit any requirement in the power range between 0.25 and 400 kW.
|
|
|
|
|
|
An Intelligent Solution for Every Drive Task
Mitsubishi Electric delivers innovative, open, flexible and reliable drive solutions geared to the special needs of individual markets and customers.
FR-S 500 Series
• Small, compact design
• One-touch Digital Dial for simple operation and configuration
• V/f control
• RS-485 interface
• PID controller
• Motor potentiometer
• Active current control
FR-E 500 Serie
• Compact class dynamic vector frequency inverter
• SLV control method for high torque in the low speed range
• Active current limiting
• Profibus DP, CC-Link, RS-485 interface
• Integrated brake transistor
FR-A 500 Serie
• A high-end drive solution
• SLV, V/f and closed-loop control methods
• Profibus DP, CC-Link, DeviceNet, RS-485 interface
• Automatic motor specifications identification and Online Autotuning
• Soft PWM control
FR-F 700 Serie
• Simple configuration and operation with the one-touch Digital Dial
• Extensive control and data management features, incl. servicing timer
• OEC (Optimum Excitation Control) technology for maximum energy savings
• LonWorks, Profibus DP, CC-Link, DeviceNet and RS-485 interface
• USB port (optional)
• Integrated EMC filter
|
|
The frequency inverter for harsh environments NORDAC SK 750E
With its high IP 54 class of protection, the SK 750E is optimally equipped to meet the requirements of distributed drive control.Allowing for alternative mounting options (wall or motor as appropriate) the device can smoothly be integrated into the existing machine and system architecture.The NORDAC SK 750E is a robust drive control package available with outputs between 5.5 and 22 kW, for connection to supply voltages between 200 and 480 VAC.
|
|
|
|
|
|
These electrical machines are expressly designed and manufactured for military, aeronautics and other purposes where high performances and reliability are required. They are constructed in the singleblock 2 ball bearings version and on coaxial 4 ball bearings version with couplement joint and basement.
They are available in both version: synchronous and asynchronous with 1% slip or 2% slip.
On request the electric drive panel is supplied.
GENERAL TECHNICAL DESCRIPTION
Asynchronous motor with cage or selfstarted syncronous motor by means special rectifier bridge.
Selfregulated 400 Hz alternator brushless type
Drip proof : IP 21 (others upon request ).
In according to the following international standards IEC 341 , CEI 23 , VDE 0530 , MIL STD 704 , BS2G 219 , AIR 2021 E.
Construction available on request in according to the radio suppression standards : MIL STD 461,
GA EG13E , VDE 0875 grade N or K ,MIL 16910A .
Continuous duty S1
Insulation class : rotor H , stator F
Double impregnation; protected by a antimildew varnish.
Three phase voltage 115 / 200 or 120 / 208 V (others upon request).
TYPICAL PERFORMANCE
VOLTAGE REGULATION : ± 0.5% from no load to full load
WAVEFORM :THD < 2% (total harmonic distorsion) line to line and line to neutral with linear balanced load
(THD < 1% upon request).
RECOVERY TIME : < 60 ms
OVERLOAD CAPACITY : 110 % 1h ; 125 % 10 min ; 150 % 2 min
|
|
|
|
|
|
Inverter ESM and Agy-EV series
Inverter ESM series
The ESM are advanced technology Inverters , featured by an extreme easiness of use and by a very good quality/price ratio.
They are available in 18 sizes , from 0,37 kW up to 2,2 kW in single phase version and from 0,37 kW up to 22 kW in three phase version, for output frequencies up to 240 Hz (1000 Hz by request )
Three on-board functions and relatively few parameters make their programming extremely easy.
An EPM module, on purpose designed for this series of Inverter, will store the setting parameters on a programmable chip, placed on the front panel of the unit and easily replaceable in case of a modification.
Inverter Agy-EV series
They are General Purpose Inverters , destined to the speed variation of AC motors , where high starting torques and/or very low speeds are needed.
Available in a big number of sizes , for output power from 30 kW up to 200 Kw (other lower kWs are available by request ), the following versions can be delivered:
1. Agy-EV and 4A , for three phase supply 230 ÷ 480 V , 50/60 Hz , up to 200 kW
2. Agy-EV 5, for three phase supply 575 V , 50/60 Hz, up to 140 kW.
The wide range of options and fittings allows a great flexibility of configurations for different applications.
The Agy-EV Inverters can be interfaced to the following field buses :
PROFIBUS, CANopen and DeviceNet.
|
|
The Honeywell NX Series drives have been built on the principles of Software and hardware modularity. The power unit utilises the most sophisticated semiconductor technology, with highly modular construction that can be adapted to a customer's specific requirements.
Typical power options include input and output filters, brake resistors together with IP21 (NEMA1) and IP554 (NEMA12) enclosure types.
Two types of control units are available - the standard sensor-less vector control unit, which has performance that is usually sufficient for most applications. The closed loop vector control unit has servo type performance for more demanding applications - e.g. cranes, lifts, multiple synchronised drives.
|
|
|
Frequency converters specif cally developed for the drive of a high frequency spindle. Innovative technology combined with our spindles leads to a high measure of operating safety and reliability. We guarantee optimal performance.
|
|
Wide range of input frequency. Can convert pulse input's to a mA/V output.
In lower frequencies can also be used as an divider.
|
|
EDS1100 Series Special For Drawing Machine Frequency Inverter
1 independently constitute dual frequency digital PID control system
2 To identify rolling diameter of line-receiving tray aotomatically
3 Automotic identification of mechanical transmission ratio
4. Automatic identification of diameter of cable
5. Automatically adjust PID parameters
6. Automatically track speed of mianframe, and after power on it will go to zero point pf tensity balance bar
|
|
Speed – Commander frequency converter
The SPEED COMMANDER is a static FREQUENCY CONVERTER for infinitely variable speed control of three-phase motors
Range of power :
* 0,75 kW - 1,5 kW / 1 x 230 VAC
* 1,1 kW - 11 kW / 3 x 400 VAC
|
|
Is a user-configurable crystalbased PLL integrated circuit. It includes a digital phase detector, op-amp, VCXO and additional integrated functions for use in digital synchronization applications.
Applications:
- Frequency Translation
- Clock Smoothing
- NRZ Clock Recovery
- DSLAM, ADM, ATM, Aggregation, Optical Switching/Routing, Base Station
- Low Jitter PLL's
Features:
- Output Frequencies to 65.536 MHz
- 5.0 V or 3.3Vdc Operation
- Tri-State Output
- Holdover on Loss of Signal Alarm
- VCXO with CMOS Outputs
- 0/70° or -40/85°C Temperature Range
- Ceramic SMD Package
- RoHS/Lead Free Compliant
|
|
|
|
|
|
b maXX 1000 - Frequency converter
In designing the b maXX 1000, Baumüller has focused on providing a range that is consistently easy to use. The b maXX 1000 offers an integrated EMC filter as standard, for compliance with the applicable EU standard (EN 55011A/Second Environment).
Numerous protective and overload functions, such as phase failure detection on the line and motorside, ensure error-free operation. Comprehensive control and data management constantly provides a precise overview of the current drive status.
The b maXX 1000 is also equipped for wide-ranging applications, thanks to its 15 different preset speeds. Its adjustable pulse width modulation, from 1 kHz to 15 kHz, also means that it emits barely any noise during operation.
It can achieve a rotating field frequency of between 0.1 Hz and 400 Hz, meaning that even multi-pole machines can be operated in a high speed range.
The b maXX 1000 can be connected to CANopen, the premier open fieldbus system.
It is also able to work as a motion control slave, due to its integrated protocols.
|
|
|
Now you can get the complete “package” from Mitsubishi – we develop, engineer, manufacture and service AC variable frequency drive packages. Our package contains a complete variable frequency drive assembly with options selected from an extensive menu, including circuit breakers, contactors, plug-in options, pilot devices and much more – all mounted and wired in a robust enclosure. Our packaged drives come to your facility with “As Built” documentation, pre-tested and ready for installation and wiring.
|
|
|
Many industrial applications as well as naval power systems require a power supply with a frequency of 60Hz even in countries using 50Hz in general. The PILLER UNIBLOCK UBSF is a unique frequency converter, that combines the benefits of a robust synchronous generator with state of the art control features for most reliable and efficient operation.
|
|
|
Electronic Controllers are today standard for highly sophisticated drives. The WEG electronic program contains specific electronic controllers for Single-Phase Motors and for all D.C. Motors. All versions are robust controllers for industry purposes to be fitted in the switch cupboard. With regard to the general technical progress in the technology of semiconductors and microchips, our electronic controllers will be permanently improved.
|
|
|
A full series of flexible solution drives that are versatile and extremely easy to use, featuring control for high performance and unbeatable advantages in their scalability and compact size.
|
|
|
A full series of flexible solution drives that are versatile and extremely easy to use, featuring control for high performance and unbeatable advantages in their scalability and compact size.
|
|
IndraMotion MLD
the solution of automatism integrated into the variator for the mono and multiaxis applications. Compact and modular structure for decentralized architecture based on the platform IndraDrive hardware
|
|
Demag Dedrive Pro frequency inverters:
Our Dedrive Pro frequency inverters are high-performance components ranging from 1.5 to 560 kW for 380 to 690 V systems. They are the solution for a variety of requirements and firmly established their position in the industry. We have developed sophisticated extended functions for special requirements in your company - for example special crane functions.
|
|
Frequency inverters are used for electronic speed control on machine drives. The needs of the market are wide and varied, and we can offer a homogeneous range of standard products for everything from simple speed control to complex applications with high requirements in respect of drive behaviour and functionality. Our drives are reliable in respect of operation, flexible in terms of application, easy to commission and meet high standards of quality. We can provide a solution to suit any requirement in the power range between 0.25 and 400 kW.
|
|
|
|
AC drives
