|
|
Among the many diverse custom optical coatings, components
and assemblies that PPC offers are diode-pumped Nd:YAG
resonator mirrors, 50/50 non-polarizing beamsplitters, laser mirrors
and thin-film polarizing beamsplitters.
For all the optical components we
provide, we use only ion-beam-sputtered
(IBS) coatings because our IBS coatings are
significantly more dense, durable, and rugged
than conventional coatings. The IBS coating
process is both accurate and repeatable, resulting
in precision coatings that are easy to
clean, chemically resistant and insensitive to
moisture and other environmental factors.
These are just some of the types of coatings that PPC
does every day on in-house and customer-supplied substrates.
High-energy ion-beam-sputtered thin films that are
accurate, durable and environmentally stable are our forté,
and we can turn around parts in as little as 48 hours!
|
|
|
Scitec Instruments supplies precision optical components and assemblies. Our manufacturer has a strong capability to design and fabricate both custom made optics with various optical materials and supply a huge range of standard stock optics products for both OEM and R&D users. Extensive testing ensures that all products are shipped to exacting specifications and within precise tolerances.
|
|
We provide various fiber optics devices ranging from tunable filters to external cavity laser light source.
All of them are developed based on the latest thin-film technologies.
|
|
4 types of coupling prisms are available; right angle, isoceles, doubles and cylindricals.
Their index of refraction must be higher than the refractive index of the waveguiding material. They are made from ordinary high index glasses like SFL57 from Schott or S-TIH53 from OHARA, with a refractive index well over 1.8 in the visible range of optical spectrum. These are standard glasses and we will gladly provide all the information on this glass if needed. In m-line spectroscopy, the exact value of the base angle is important and it is specified for each prism. The prism can be provided alone or glued to stainless steel holder that can be easily attached to the coupling clip.
|
|
|
These five sided prisms are used to deviate the incident beam 90° independent of small positional changes of the prism relative to the beam. The image is neither inverted nor reverted. Reflecting faces are AlSiO coated.
|
|
|
|
|
|
PPC provides high-quality custom optics and optical assemblies which
utilize our IBS coatings, ultraprecise fabrication capabilities and epoxy-free,
bonding technology—Chemically Activated Direct Bonding™ (CADB). They
are available in a wide variety of materials including fused silica, BK7, Zerodur®, LaSFN9, YAG, ULE, and other optical glasses and crystals, and can operate over wavelength ranges from 250–2200 nm.
These assemblies are ideal for increasing the sensitivity in beam-delivery microsystems, fiber-optic, and endoscopic systems used in fluorescence spectroscopy, Raman spectroscopy, optical-coherence tomography (OCT), multiphoton microscopy (MPM) and confocal microscopy. Because of their miniature size, they can be placed right at the objective lens or at the tip of optical fibers and light pipes.
Whether you need 1 or 10,000 pieces, our precision wafer-based processes result in high yields and competitive costs, especially at higher volumes. The high-precision assemblies have been widely used for beam steering, wavelength locking and reference cavities in telecommunications and metrology.
Call us to discuss your custom prism or micro-optics needs.
|
|
Prisms are blocks of optical material with flat, polished sides that are attached at precisely controlled angles to each other. Prisms may be used in an optical system to deflect or deviate a beam of light. They can invert or rotate an image, disperse light into its component wavelengths, and be used to separate states of polarization.
The orientation of prism determines its effect on a beam of light or image. A viewer looks through a prism at an object and sees a virtual image. This image may be displaced from the original object, or, in the case of a dove prism, may coincide with the object. Furthermore, image orientation may differ from the object, as shown in the drawings below.
Prisms will introduce aberrations when used with convergent or divergent beams of light. Using prisms with collimated or nearly collimated light will help minimize aberrations. Conjugate distances that include prisms should be long.
|
|
Prisms
From basic Right Angle to complex multi faced prisms, MediVision manufactures prisms to fit many applications. Prisms, like mirrors, are used to change directions of light. Prisms, however, are a better choice for mounting and alignment especially if multiple reflections are required.
Materials Borosilicate Glass, Optical Crown, Fused Silica, Quartz, Zerodur
Dimensional Tolerances: up to +/- .10mm
Angle Tolerance: up to 2 arc seconds
Surface Quality : up to 20-10
|
|
|
|
|
|
A prism is a complex optical component with at least two plano surfaces separated by a wedge angle. Prisms are used to reflect or refract a beam of light. Our manufacturing capabilities include right angle, dove, penta, pechan, and wedge prisms as well as cubes, windows, precision flats, beam splitters, and mirrors. These components are found in dual channel instruments, anamorphic systems, imaging systems, and similar applications.
Optimax has interferometers, autocollimators, and a Wild Goniometer for precision measurement of flatness and angles. We also make transmission flats for interferometric testing of surface irregularity to 50th wave.
Optimax inspects 100% of all optics and provides test data with prototype orders. We utilize state-of-the-art metrology and provide on-time delivery guarantees to ensure your satisfaction!
Optimax can provide optics complete with BBAR, V-coat, and mirror coatings. We have four electron-beam coaters supported by a Perkin-Elmer Lambda 900 Spectrophotometer. For more details please see our Coatings data sheet.
|
|
|
Equilateral prisms are normally used for the dispersion of light into its different colors. Light incident at an oblique angle to the first face is dispersed according to its wavelength and emerges as a spectrum from the opposite face. We offer these prisms made from BK7 optical glass.
|
|
|
Plane optical parts/prisms are developed both customer-specifically and on demand.
|
|
|
|
|
|
Research Electro-Optics, Inc. (REO) offers prism products that feature industy leading precicsion with proven volume manufacturing and state of the art metrology. Our high energy Ion Beam Sputtering coating process ensures that our multi-faceted prisms will exceed all Telcordia requirements for durability, reliability and environmental stability.
REO's advanced fabrication technology allows for the manufacture of multifaceted prism components of all levels of complexity, from the simplest three-sided right angle prism to the most complex three-dimensional structure. Roof, dove, penta, rhomboid, and other types of prisms of sizes from less than 1 mm to greater than 8 inches may be fabricated from a variety of materials, including fused silica, crystalline materials, semiconductor materials, and most other optical glass materials. REO can apply coatings to any optical facet to perform a multitude of functions including anti-reflection, high reflection, beam splitting, polarizing, non-polarizing, retarding, TIR retardance correction, and more.
REO has the proven high volume capacity for manufacturing prism products using processes that are engineered and controlled to be high quality, high yield, and cost effective. Our established ISO 9001 certified quality system guarantees results that meet every specification, every time.
Features:
Precision tolerances
Custom geometries
Environmentally stable
Applications:
Beam Steering
Beam Shaping
Switching
Attenuation
|
|
Right-angle prism is the most common type of prisms. It is used to re-direct a beam of light at 90 degrees from the the incident direction or used as a 180 beam retro-reflector. They are often coated with various optical coatings to form cubic beam splitters and color separation cubes used in various projection systems.
High transmission can be achieved, using the hypotenuse face in total internal reflection (TIR), with an antireflection coating on the entrance and exit faces.
The prism can be used as an internal or external mirror by applying a metallic coating on the hypotenuse.
We also offer fused silica prisms, and precision grade and ultra-precision grade glass prisms with tighter manufacturing tolerances.
|
|
|
Prisms are blocks of optical material with flat polished sides arranged at precisely controlled angles to each other, which deflect, deviate and rotate beams of light as well as dispersing their wavelengths. Tempotec offers many types of high precision prisms as follow.
|
|
|
|
|
|
Prisms are transparent optical blocks having at least two flat polished sides inclined relative to each other, at precisely controlled angles, so as to deflect, deviate, and rotate beams of light as well as dispersing their wavelengths.
There are many types of prisms, each having a particular shape to achieve the necessary reflections to perform a specific optical task.
Tower Optical’s prism capability includes Penta Prisms, Right Angle Prisms, Dove Prisms Roof Prisms, Corner Cube Reflectors, Anamorphic Prisms, Wedge Prisms and Polarizers called Glan-Taylor Prisms, Wollaston Prisms and Rochon Prisms.
For right angle prisms Tower offers three different quality standards, .Common Grade, High Grade and Laser Grade.
These prisms are also available in UV grade Fused Silica as well as other material. Optical coatings are also available for AR, Mirror or beamsplitter applications.
Custom Prism Capabilities
Sizes 0.5 – 80 mm
Angle Tolerance to 1 Arc Second
Dimensional Tolerance +0.10 mm
Surface Quality (Scratch/ Dig) 10/5
Flatness l/10 @ 632.8 nm
Tower Optical manufactures custom prisms. If you have a design simply email it to Sales@TowerOptical.com and indicate the quantity required. We will respond with a quotation in several days.
|
|
The right angle prism is manufactured from highest quality BK-7 type crown glass and fused silica. The surface flatness is less than 2 waves per inch at 546.1 nm.
* Right Angle Prisms - BK-7
* Right Angle Prisms - Fused Silica
* Right Angle Prisms Precision - BK-7
* Right Angle Prisms Precision - Fused Silica
|
|
|
|
|
|
Advantages of PPC's Ion-Beam-Sputtered (IBS) Dielectric Thin Films
--------------------------------------------------------------------------------
Durable, dielectric thin films are easy to clean and chemically resistant
Dense, non-porous structure is insensitive to moisture
Low scatter and absorption losses result in high-damage thresholds
Repeatable, highly controlled process for precise layer control
--------------------------------------------------------------------------------
At PPC, we use ion-beam sputtering (IBS) technology because IBS is a repeatable and controllable process that results in dense, durable, high-damage-threshold thin films. Since the materials are directly sputtered onto the substrate, the process can be precisely controlled and easily automated so that films can be deposited with extremely high accuracy and repeatability.
Unlike conventional evaporative and ion-assisted films that have porous microstructures, IBS films have extremely densely packed structures that make them impervious to water vapor, resulting in an insensitivity to changes in heat and humidity, even in a vacuum environment.
Types of coatings that PPC does every day on standard or customer-supplied substrates:
High reflectors
Anti-reflection (ARs)
Beamsplitters
Polarizers
Partial reflectors
Dichroic mirrors
Non-polarizers
Low dispersion
Broadband dielectric
|
|
|
|
|
|
Thin film coating is a vacuum deposition procedure used to enhance the transmissive properties of an optical surface. The most common types of dielectric coatings are anti-reflection and high reflection coatings, but beam-splitter, band pass filter, edge filter, and polarizing coatings are also available. Because thin film coatings are more durable than optical glass, coatings also help protect an optic surface from scratches and the environment.
Optimax produces optics up to 300mm in diameter with a wide variety of narrow and broadband anti-reflection coatings including doublet interface coatings. Both metal and dielectric mirror coatings are also available. For custom coatings, we utilize TFCalc thin film design software. Please see the reverse side for sample reflectance curves.
Optimax performs test runs of all coatings before beginning production to ensure a good design. We use a Perkin-Elmer Lambda 900 Spectrophotometer to check the performance of the coating upon completion. Adhesion, abrasion, and humidity tests are available to verify coating durability in accordance with sections of MIL-C-675C, MIL-C-48497A, and MIL-C-13508C specifications. Laser damage testing is also available upon customer request.
|
|
|
OptoSigma supplies a wide selection of optical thin film coatings. These coatings are often provided as part of the optical component but they may also be ordered separately to be applied to an uncoated element. For example, it is possible to apply an Anti-Reflection coating to any uncoated lenses, windows or optical fibers. Also reflecting coatings may be applied to uncoated substrates to form mirrors or partial reflectors. To make this process simple we have listed some of our most common standard coatings. To order you simply append the coating suffix to the base part number and specify the surfaces to be coated. If you don't find the exact coating you need please ask us to provide you with a custom solution. Our coating engineers will use the latest design software and production techniques to provide you with the coating you require.
|
|
Standard Specifications
Diameter: 0.995" +/- 0.005"
Thickness: 0.030" & 0.020" +/- 0.005"
Surface Quality: 60/40 S & D
Surface Accuracy: 1/4 over 85% clear aperture
Edge Bevel: 0.010" Maximum @ 45°
P2S: High Polish two sides
Quantity: Volume Discounts available
Custom: VPG manufactures custom witness/diffusers with varying thickness, dimensions, materials, flatness and surface finish. Call for pricing on your special requirements.
|
|
he offered HALIDES are useful as starting materials for production by thermal evaporation of transparent thin-film interference coatings, which improve the optical characteristics of workpieces made of glass, quartz, single crystals, semiconductors, etc.
Used for deposition of mono- and multilayer optical coatings, they are effective in ultraviolet, visible and infrared spectral regions. Halides, fluorides in particular, is the most early class of film-forming materials, used as one of the first as thin-film dielectric antireflecting coatings in optics.
|
|
Windows are used to enable optical radiation to pass from one environment to another without allowing the environments to mix.
Optical flats are used with monochromatic light sources, such as sodium lamps, to evaluate surfaces of other optical elements.
|
|
Optical windows are made of optically transparent materials with parallel polished sides, ground edges and chamfers. The only difference between windows and filters is degree of attenuation of the optical spectrum.
The optical windows are usually intended to have maximum possible transmission for given material. The AR coatings are often applied on the polished sides of the optical windows to improve their transmission characteristics. Windows are often used as protective elements. However, they may have additional filter or beamsplitter function. We can produce custom windows on request.
|
|
|
Windows are frequently used in optical systems to separate the environment in one part of the system from another, such as to seal vacuum or high-pressure cells. Because the infrared transmitting material has a high index of refraction, an anti-reflection coating is typically applied to windows to minimize losses due to reflections.
|
|
Windows
Windows play an important role in optical design. Having an extensive manufacturing capability with a variety of materials, allows MediVision to offer our customers many choices. For a complete listing of IR materials please see that section.
Materials Synthetic Sapphire, Fused Silica, Quartz, Schott or equivalent.
Sizes: 4mm - 350mm (round or square)
Thickness: 1mm to 25mm
Surface Quality: up to 20-10
Parrallelism: up to 1sec
|
|
|
Opal glass is a superior diffuser to ground glass because it depends upon the scattering of light by particulate matter suspended in the glass itself rather than a surface reaction. It is correspondingly less efficient in overall transmission.
|
|
|
Windows are applied to isolate different physical environments while allowing light to pass. When selecting windows you should consider materials, transmission, scattering, wavefront distortion, parallelism and resistance to certain environment. Tempotec offers a wide range of different materials and different degree of precision windows.
|
|
|
|
Prisms, Other refractive optical components
