|
|
ES Sirens
The ES range of sirens provides electronic warning over large distances.
- Powerful sound for wide area coverage
- Choice of universally recognised or user defined emergency signals
- Rugged construction for outdoor use
- Reliable unit with fault diagnosis and silent siren test features
- Integral battery pack to overcome mains power failures
- Pre-recorded voice or PA capability
Overview
The ES range of sirens provides electronic warning over large distances.
Designed for outdoor use with a durable and rugged construction, ES Sirens are particularly suited for critical alarms such as toxic gas release, disaster and emergency warning, flood alert and COMAH alarms.
Electronic control of the siren provides advantages for the user: pre-recorded or live voice messaging; self-monitoring of equipment status; choice of speaker configuration.
A full range of control equipment is available: stand alone hardwire switch control; computer system control; radio controlled link units.
|
|
The BExSB1 Alarm Bell is designed to warn, call and signal in areas with explosive atmospheres. The emphasis of the ring is at approx. 1000Hz, as a result of which the signal stands out clearly against lower frequency ambient noises.
Features:
- ATEX II 2 G EEx de IIC T6
- Output: approx. 105dB(A) @ 1m
- Protection: IP 66
- Integrated terminal box: Ex increased safety
- Housing: glass-fibre reinforced polyester
|
|
The BEx explosion proof alarm horns are available in two output levels, 117 dB(A) and 123 dB(A) @ 1m. They are designed for installation in Zone 1 & 2 (BExS110/BExS120) and Zone 21 & 22 (BExDS110/BExDS120). Both models are available in EEx d and EEx de versions.
Features:
- Suitable for Zone 1, 2, 21 & 22
- EEx d and EEx de versions
- ATEX, GOST-R, IECEx approved
- Dual M20 cable gland entries
- Large termination areas
- Ratchet adjustable mounting brackets
The BEx range also includes:
- 5, 10, 15 & 21 Joule Xenon beacons
- High output L.E.D beacons and status lamps
- 15 & 25W loudspeakers (100V, 70V line & 16R, 8R)
- 'Appello' speech and tone voice annunciation models
- Audio-visual combination units
|
|
|
The EEx Sounder dEV 21 is a signalling device that generates various signalling tones and signalling tone sequences and emits them at a high sound pressure level. The user may choose between 31 preset signalling tone groups and one programmable one. Every signalling tone group contains 4 different signalling tones. Wire the control inputs with floating contacts or jumpers in order to chose any one of these 4 signalling tones. The sounder has 8 volume levels. All outer fastening parts are made of non-corrosive materials. The stable, all-plastic housing conforms to protection degree IP 66, which means the sounder can be installed both indoors and outdoors. Explosion category II 2 G EEx dem IIC T6 allows the sounder to be operated in hazardous areas of zones 1 and 2.
|
|
|
|
|
|
Syrex Exd-3 Sounder
The Syrex Exd-3 is an electronic sounder designed for potentially explosive atmospheres and harsh environmental conditions. Certified to ATEX II 2 G EExd IIC T4, it is suitable for Category 1 use.
- Rated for Category 1 use (formerly Zone 1 and 2)
- ATEX approved
- II 2 G EExd IIC T4
- High sound output up to 117dB(A)
- Choice of 32 tones
- Weatherproof to IP67
Overview
The Syrex Exd-3 is an electronic sounder designed for potentially explosive atmospheres and harsh environmental conditions. Certified to ATEX II 2 G EExd IIC T4, it is suitable
for Category 1 use.
With a high degree of ingress protection (IP67) and a choice of tones including those covering PFEER/UKOOA requirements, it is suitable for use in almost any application.
The standard version gives the user a choice of the 1st stage alarm tone with stages 2 and 3 fixed at manufacture. A 4-stage fully programmable version is also available on request.
The unit is fitted with two 20mm cable entries and has terminals that accept 4mm2 cable for ease of installation. Dual In/Out terminals are also available on request.
A dustproof version of the Exd Sounder is also available.
|
|
The E2x warning horns are available in two outputs levels 110dB(A) and 117dB(A) @ 1m, both featuring 45 tones and three stages. The E2x-range of hazardous area products provides signalling solutions for every Zone 2 or Class I Division 2 application. Containing the latest in electronic circuit design, they provide unparalleled performance and reliability.
Features:
- Constructed from lightweight corrosion free PPS and impact resistant ABS
- ATEX certified products: dual M20 cable entries and in & out terminals
- UL approved products: single 1/2” NPT entry pre-wired with flying leads
- Mounted via a fully adjustable ‘U’ bracket
The E2x-range includes:
- 110dB(A) and 117dB(A) alarm sounders
- 5 & 10J Xenon Beacon
- Combined Alarm Horn and Xenon Beacon
- 15W PA Loudspeaker
|
|
|
|
|
|
The EEx II signalling hooter dGH21was developed for warning, calling and indicating purposes in areas with explosive atmospheres in group II and for rough ambient conditions. Thanks to its compliance with the explosion protection class II 2G EEx de IIC T6, this signalling device can be used without restriction in all areas with explosive atmospheres in zones 1 and 2. The hooter produces a volume of appr.105dB(A) . The characteristic hooting sound can be clearly heard above any other higherfrequency sounds in the area. The dRGH21 comprises a telephone calling relay and reproduces the signals in the pulse rate of the overriding telephone call. The explosion protection is given through the flameproof chamber and the chamber “increased safety”. The flameproof chamber contains the electromagnetic drive system and, for the dRGH21, an additional telephone calling relay. The signal membrane is mounted outside of the flameproof room beneath a closing cap with the appropriate sound control. The housing is made of GRP thus guaranteeing protection against corrosion. Furthermore the construction is lowweight and highly robust. All DC versions are equipped with an electronic contact breaker which considerably increases service life compared with other commercially available devices.
|
|
Dust Line Signalling Devices for Zone 22 ( Dust )
Now available in EEx for use in dust areas like mills and concrete-plants
|
|
Plenty of innovations in WERMA’s Ex range
WERMA has manufactured explosion-protected signal devices in out-standing quality for over 50 years. Many years of experience and know-how in the field of signal technology make WERMA a reliable partner with an extensive range of innovative Ex products. Our Ex-products are developed and designed in accordance with the new-est norms and guidelines and are certified by accredited testing boards.
The guidelines concerning explosion protection and the demands made upon the signal devices themselves have changed enormously over the last few years. WERMA has invested in the development of innovative Ex products which meet the most exacting standards in order to fulfil customer needs.
Our new high-impact programme ranges from Ex signal beacons to optical and audible Ex signal devices. The new WERMA products can even be used in gas and dust explosion endangered areas (Zone 1 and 2, Zone 21 and 22).
|
|
Over the last 15 years the AlertAlarm and AlertAlight ranges from E2S have become the standard for industrial signalling. With outputs from 104dB(A) to 126dB(A), the ranges provide heavy duty signals which are ideal for fire, security and industrial process applications.
Combining the alarm sounder of the AlertAlarm range with the L101 series beacon, the AlertAlight range provides a versatile audible and visual signalling solution.
Features:
- 32 or 45 tones (meeting European Standards)
- Outputs from 104dB(A) to 126dB(A)
- EN54-3 tested CPD compliant
- 3 stage alarm option
- UL listed versions available
- ABS UL94V0 housings
- Sealed up to IP66
- Available with 5 Joule Xenon, filament bulb or L.E.D. beacon (AlertAlight range)
|
|
|
|
|
|
Multi-Tone Sounder 139 and 141 and
Flash/ Multi-Tone Sounder Combination 439 and 441
Whether in automated equipment or building installations, across a diverse range of industrial and commercial settings, audible and optical-audible signals are indispensable in today’s world.
Loud multi-tone sounders 139 and 141 with 32 different tones
The multi-tone sounders 139 and 141 from WERMA Signaltechnik provide 32 different tones and frequencies for a diverse range of applications. In addition to continuous and alternating tones in a range of frequencies, the new multi-tone sounders also provide a large selection of defined international standard tones. The sound output can be adjusted in accordance with the ambient noise up to a level of 110 dB (Multi-Tone Sounder 141), or 105 dB (Multi-Tone Sounder 139).
Multi-tone sounders in combination with light intensive xenon flash
Many applications call for the reinforcement of the audible signal by an optical signal. WERMA’s optical-audible combinations 439 + 441 provide the optimum solution: A loud multi-tone sounder in combination with an intensive xenon flash.
These flash/multi-tone sounders, in addition to an innovative and attractive design, can also generate a flash energy of up to 2.5 Ws (Combination 441), or 1.6 Ws (Combination 139). In addition, 2 tones can be triggered externally and the optical and audible signals can also be triggered separately.
|
|
The SpectrAlarm range from E2S has been designed to offer high performance audible and visual signalling in a single unit. Sound outputs of up to 126dB can now be combined with a powerful beacon from a choice of rotating mirror, flashing xenon or LED technologies.
Features:
- Three sizes of sounders: 112db(A), 119dB(A) and 126dB(A) @ 1m
- Three types of beacons: 5J and 15J Xenon strobe, multifunction LED, 20/25W and 35/40W rotating halogen beacon
- 45 alarm tones (UKOOA/PFEER compliant)
- 3 stage alarm option
- Volume control
- Automatic sounder synchronisation on multi-unit systems
- Beacon manufactured from UV stabilised polycarbonate
- IP65
- The sounder and beacon can also be connected separately
|
|
General Information
Combined sounder and amber beacon designed for use in applications where both audible and visual warning is required such as areas where the occupants may be hard of hearing or visually impaired such as in nursing homes.
Low profile
Attractive styling
Anti surge design
Optional weatherproof deep base available
Specification
Brand: JSB
Dimensions (mm): Dia 93 x 92D
Weight (KG): 0.4
ANA Number: 5018986229884
Cable Entry: Rear
IP Rating: IP20
Vandal Resistant: Yes
Sound Output Db(A) at 1m (+/- 2): 96 - 101 (directional)
Current Consumption: 68mA (Ave ) 73mA (Peak)
|
|
General Information
Speech sounder offering superb speech clarity with a high sound output and low current consumption. When supplied with 24VDC the sounder first emits an attention grabbing alarm tone followed immediately by instructions as to the required action. The tone and message then repeat for as long as power is applied.
Different versions of the product are available with different and messages, The message for this version is "In the interests of safety please evacuate the building now."
Easy to install
100dB(A) output
Clear intelligible human speech
Low current consumption
Automaic synchronisation
Specification
Brand: Menvier
Dimensions (mm): Dia 95 x D 105
Weight (KG): 0.3KG
ANA Number: 5018986236332
Cable Entry: Rear or side
IP Rating: IP65
Vandal Resistant: Yes
Sound Output Db(A) at 1m (+/- 2): 100
Current Consumption: 20mA
|
|
The IS-mC1 combined alarm sounder & L.E.D. beacon has been designed for installation in intrinsically safe environments (Zone 0). The IS-mini range also includes stand alone intrinsically safe alarm sounders and L.E.D. beacons and is definitely the most effective method of signalling in Zone 0.
Features:
- Zone 0, 1 & 2
- EEx ia IIC T4 (Tamb.-40 to +60°C)
- Maximum 100dB(A) output
- 49 alarm tones, 3 alarm stages
- Array of 6 high intensity L.E.D's
- Sealed to IP65
- ATEX, FM, IECEx
|
|
Sonos Sounder Beacon (DC)
A general purpose electronic sounder for fire, security and industrial applications; the Sonos Sounder Beacon is certified to EN54.
- Simple 'First Fix' installation (no second fix wiring)
- Smooth flow cabling for faster installation
- Quick connect/disconnect
- No locking screw required
- Tone and volume can be preset or adjusted off-base
- Weatherproof to IP65 (deep base units)
- Choice of lens colours
- Low current LED beacon as standard (xenon beacon available on request)
- Sounder and beacon can be controlled separately
|
|
General Information
MLC624 is a high output low current sounder which produces 100dBA output yet has a current consumption of only 5mA
Low current consumption
High sound output
Easy to install
Specification
Brand: Menvier
Dimensions (mm): L106 x D95 x H106
Weight (KG): 0.21
ANA Number: 5021181029456
Cable Entry: Rear or side
IP Rating: IP42
Vandal Resistant: Yes
Sound Output Db(A) at 1m (+/- 2): 100
Current Consumption: 5mA
|
|
The BKV series stores up to 31 voice message / sound data with 63 seconds of total recording time, and high sound pressure of 95dB is ideal for use in noisy environments.
* Size: 120mm square
* Available in 12-24V DC, 100V AC and 220V AC versions
* Total recording time of 63 seconds (64kbit/s) can be divided up to 5 channels by bit input or 31 channels by binary input
* Voice messages or sound data is field-programmable with SD card (SD card is sold separately)
* Maximum output level of 95dB at 1m is suitable for use in noisy environments
* Sound volume and playback mode can be easily changed by rotary switches stored behind the front cover even after installation
* Front panel color is available in ivory white and dark gray
|
|
The BDV series stores up to 15 voice message / sound data with 63.5 seconds of total recording time, and compact box design is ideal for use with control panels or production equipment.
* Size: 80mm square
* Available in 12-24V DC and 100/220V AC versions
* Total recording time of 63.5 seconds (64kbit/s) can be divided up to 4 channels by bit input or 15 channels by binary input
* Voice message / sound data is field-programmable with SD card (SD card is sold separately)
* Maximum output level of 87dB at 1m is suitable for use in noisy environments
* Sound volume and playback mode can be easily changed by rotary switches stored behind the front cover even after installation
* Front panel color is available in ivory white and dark gray
|
|
|
|
|
|
Werma provides a wide range of audible signal devices for the most diverse fields of use: sirens, multi-tone sirens, signal horn, three-tone gongs, alarm bells as well as buzzers and installation buzzers:
- buzzer 65 dB - IP 65 - installation mounting for the 22.5 mm (M22) control panelprogramme- ref. 107 - continuous tone or pulse tone- 2400 Hz - Connector plug with screwable connection, simple connection by means of connector plug
- buzzer 80 dB - IP 65 installation mounting for the 22.5 mm (M22) control panel programme- ref. 109 - continuous tone or pulse tone- 2100 Hz - Connector plug with screwable connection, simple connection by means of connector plug
- buzzer 100 dB - IP 65 installation mounting for the 22.5 mm (M22) control panel programme- ref. 110 - 8 different tones selectable (1600 to 3400 Hz) -Connector plug with screwable connection, simple connection by means of connector plug
- Loud piezo signal device- 90 dB - IP 30 installation mounting for the 28.5 mm (M28) installation range- type 118 continuous tone, type 119 continuous tone and pulse tone - 2400 Hz - with spades
- Electronic Installation Buzzer- 85 dB - IP 30 installation mounting for the 30.5 mm (M30) installtaion range - continuous tone - 2400 Hz - with spades
- AC Installation Buzzer with 65 dB and Installation Buzzer with 90 dB
All voltages available: 230 V AC, 115 V AC/DC, 48 V AC/DC, 24 V AC/DC, 12 V DC, 6 V DC
|
|
The sound level can be measured but no precise
indication exists for the range of the sound. Too
many unknown factors affect this value: type of
sound, speed and direction of the wind, humidity,
fog, rain etc. etc. The data shown in the following
table are useful as theoretical indication.
The intensity of a signal is always respective -
see table on the right.
An increase in sound of 3 dB is heard as a
double sound level.
|
|
High output rotating siren designed for use in industrial environments
High audibility at 1 m : 122 dB (A)
IP 55
Compact construction
Frequency : 1500 Hz.
May be pulsed for wailing tone
Average range: 400 to 500 m.
Various indoor (safety warning) and outdoor applications :(Mining, quarrying, etc…)
Construction : ABS Rotor and body.
Easy installation : Complete with a mounting bracket and cable gland.
Rating : On 15 min / Off 2 min
1,87 kg
dim : diam 128 x lenght 175 mm
|
|
|
|
|
|
Design experts honour Flash Multi-tone Sounder with red dot award
In one of the most fiercely contested international design competitions, the red dot design award, WERMA Signaltechnik’s Flash Multi-tone Sounder 444 was selected for an “honourable mention”. The award winning signal device clearly stood out from the mass of 3,200 products from over 49 countries submitted to the competition.
Attractive Flash Multi-tone Sounder 444
With its honourable mention, the distinguished jury panel honours products that excel thanks to their highly successful design solutions. The award winning flash multi-tone sounder 444 is user friendly and visually appealing.
Diagonal lines and round forms conjure a slim appearance which harmoniously blends into the environment. It is equipped with a horn that merges seamlessly into the light window, enabling the LED double flash to propagate to the maximum. At the same time the siren generates a formidable sound output for its size of 114 dB.
Robust material, energy-saving LEDs and optimised production techniques make the flash multi-tone sounder a maintenance-free and environmentally friendly product. Thanks to its signal strength, it is especially suited for use on machines, buildings or fire alarm systems.
|
|
* 120,000 hr. LED light sources
* PLC compatible
* DeviceNet models available
* 3 visual LED signals in one compact housing
* Two stack capability for a fourth signal
* Multi-tone base module option
* Multiple LED clusters in red, green and amber or red, blue and amber
* Molded-in gasketed lens modules for dust tight reliability
* Vibration resistant heavy duty industrial design
* Mounting flange and 4", 10" and 15" mounting pipes available
|
|
Sonos Sounder (AC)
A general purpose AC electronic sounder for fire, security and industrial applications.
- Dual Voltage 110V AC or 230V AC
- Smooth flow cabling for faster installation
- Up to 106 dB (A) @ 1 metre
- No locking screw required
- Weatherproof to IP65 (deep base units)
- Synchronised alarm tones
|
|
Motion triggers audio warning and flashing lights.
- Adjustable motion detector
- Six pre-programmed audio warning messages
- Adjustable volume
- Controls concealed or underside
- Fits onto Rubbermaid Safey Cones
- Recordable 12 second custom message
- Flashing light
|
|
The DB5 intrinsically safe multitone sounder is ideally suited for use in areas of high ambient noise. Additionally, for extreme noise levels, they can be linked with the DA134 Xenon Beacons to combine audible and visual warnings. They are designed with a re-entrant configuration to combine compactness with maximum efficiency.
One of 26 tones can be selected using a 5-way DIL switch and by switching the incoming negative supply to a third terminal a second tone is sounded. The sounders have suitable low frequencies to conform to BS 5839: Part 1: 1988, making them ideal for fire alarm systems and other annunciator applications.
The IP65 enclosure enables the DB5 sounder to cope with the harsh environmental conditions found offshore as well as those of the onshore oil, gas and chemical industries. The tough construction enhances the reliability of the solid-state piezoelectric sounder.
|
|
General Information
Loop powered base mounted sounder which can either be mounted underneath the detector or fitted with a blanking plate and used as a stand alone sounder
3 volume settings
Rotary switch for ease of setting zonal allocation
Low profile
Supplied with cover plate
Specification
Brand: JSB
Dimensions (mm): Dia118 x D34
Weight (KG): 0.18
ANA Number: 5021621236437
Cable Entry: Rear
IP Rating: IP20
Vandal Resistant: Yes
Sound Output Db(A) at 1m (+/- 2): 80 - 90 (depending on volume setting
|
|
|
|
|
|
The Nexus voice sounder combines normal sounder signals with clear, synchronised voice messages for a wide range of commercial and industrial applications.
- Choice of up to 4 messages from standard message library
- Clear and precise warning messages for various industrial and commercial applications.
- Individual messages preceded by dedicated selectable tones and or/ flashing beacon
- Automatic synchronisation
- IP66 rated
- 5J Xenon beacon option
- First-fix, wire to base technology
Nexus voice sounders combine normal sounder signals with a clear, synchronised voice message to help reduce confusion and distress during an active alarm.
Standard units are available with 4 pre-programmed messages, selected from an extensive message library covering almost any conceivable application. Bespoke messages are also available on request.
Combined with a xenon beacon the Nexus sounder is DDA compliant giving a clear voice message, powerful alarm tone and high output beacon for clear and effective warning.
All Nexus voice sounders have a USB interface that allows special messages in WAV format to be downloaded onto the sounder from any PC, providing users with the flexibility of adding/removing messages in-house.
|
|
|
|