|
|
Polyurethane boot / S-00 - warm lining green
COD: EN 345-1 SB : XS00-G11-02
EN 347-1 : XS00-G11-00
Homologation: EN 347-1 /EN 345-1 (SB o SBP)
Upper: PU
Lining: warm lining
Sole: TPU rubber
Sizes: 36/47 (347) 40/47 (345)
Weight: Gr 2200
Packing: each pairs in one box// 5 pairs per carton
Characteristic: High protection against cold (CI). Extra large steel toe cap resistant to 200j (SB) steel midsole (SBP) wide last for the best comfort. Shock absorbing in the heel area, resistant to acids and hydrocarbons
Norms: EN 345 (SB SBP) - EN 347-1 issued by CIMAC Vigevano (Pv) Italia
Use: For cold stores, agriculture and skiing station
|
|
Upper: Low density PU
Sole: High density PU
Sizes: 37 – 47 (4-12)
Standard: EN 345-1 S5 CI
200 Joule steel toe and midsole
Removable cleanable insole, anti-odour and anti-bacterial.
Sanitized® treated
Antistatic
Plus:
30% lighter than a standard boot
Heat insulated
Exceptionally long life
Absorbs the energy of impact to the heels 25% better than a standard boot
Resistant to industrial oils and hydrocarbons
Multidirectional self-cleaning deep tread, for maximum adhesion in any situation.
|
|
|
SHOES FOR CREWS® has redesigned the Guardian to be even more durable and comfortable. The Guardian is the only chemical, oil and grease-resistant boot built with technologically superior slip-resistance and anti-bacterial protection. And for added comfort, this rubber boot features our anti-fatigue cushioned insole
|
|
New technology for better resistance to attack by chemicals.
Longlifesystem, a new exclusive PVC for longer-lasting Wellington boots and clogs:
The new composition of the AUDA Longlifesystem PVC uses new technology for plasticizers that makes the upper of the boot harder-wearing and so less likely to become weakened by industrial chemicals.
This technology allows more reinforcement at breaking points like the instep and the vamp where it meets the toecap for safety boots that meet the EN 345 standard.
All the uppers have received an anti-bacterial treatment for maximum hygiene.
Your team's feet will be protected for much longer!
AUDA Longlifesystem boots and clogs:
· Safety boots EN 345 with 200 Joule toecap:
Normandy SEC – Picardie SEC
· Work boots EN 347 without toecap:
Normandy – Picardie
· Work half-boot EN 347 without toecap:
Dauphiné
· Work clog EN 347 without toecap:
Bresse
|
|
ABSOLUTE SAFETY BOOT
EN 345 - S5
ARTEMIS
Sole PVC
Toecap Steel
Midsole Steel
Size Range 38-47
Category S5
|
|
For coping with unpredictable situations: very rough and dirty surface conditions or frequent changes of environment.
Original-design all-terrain hiking style safety boot, featuring a safety toecap (200 Joule) and a puncture-resistant midsole.
Full grain water-repellent leather with an ergonomic TPU reinforcement at the front for greater sturdiness and a longer working life. Ankle Protector side reinforcement to protect ankles from lateral impact.
J-ESCAPE walking sole:
- Progressive heel shock absorber to protect your back and joints from high-intensity shocks and vibrations.
- Resistant to direct heat contact up to 300°C
- Deep, multidirectional self-cleaning sole patterns for maximum grip in all situations.
Standard: EN 345-1 S3 HRO.
Sizes: 5-13
|
|
Code L 4493/2
Upper Microfiber, white color
Lining white color, absorbent, moisture wicking, high scratch resistance, anti-bacterial
Fussbett Removable, two layer, anti-static, soft latex foam inside
Sole Double density polyurethane, anti-static, non-slip, oil resistant, anti-corrosive
* Steel or Composite material crush-proof toe cap
* Steel or non metal pierce proof layer
Sizes
Steel toe cap 35 to 48
Composite material toe cap 35 to 47
Safety categories S2, S3
Fit 11 MONDOPOINT
Conformity EN ISO 20345:2004
|
|
S-00 food industry warm lining / White
COD: XS00 W11 02 (EN 345-1 SB )
XS00 W11 00 (EN 347-1)
Homologation: EN 345-1 / EN 347-1
Upper: PU
Lining: Warm lining
Sole: TPU rubber
Sizes: 36/47 (347) / 38/47 (345)
Weight: Gr 2200
Packing: each pairs in polybag // 5 pairs per carton
Characteristic: High protection against cold (CI). “Extra large” steel toe cap resistant to 200j(SB). Wide last for the best comfort. Shock absorbing in the heel area. Resistant to oils, hydrocarbons and animal fats (ISO 6112-92).
Norms: EN 345 (SB) - EN 347-1 issued by CIMAC Vigevano (Pv) Italia
Use: cold stores, food industry
|
|
Upper: Antibacterial treated PVC
Sole in two materials: Antibacterial treated PVC and 100% Nitrile
Sizes: 36 – 47 (3-12)
Standard: EN 345-1 SB E
Steel toe 200 Joules
Absorbs the energy of impact to the heel
Plus:
Slip-resistant sole. Adhesion coefficient 53% higher than the requirements set in the standard
Better abrasion resistant Nitrile sole
Boot completely and easily washable
Polyamide lining
Completely smooth upper for easier washing because dirt does not build up
Protects the ankles
|
|
Great for environmental clean ups, concrete plants, poultry and meat packing and other applications requiring heavy duty protection.
- Made with ozone resistant material
- Traction grip soles
- 100% waterproof
- Over the shoe design
- Cotton lining
|
|
Lemaitre Sécurité’s SPORTY® range: safety, comfort and looks
ABG toe cap, anatomical arch support, sole in nonslip Gummilem, highly abrasion resistant leg reinforcement, Cambrelle antiperspiration lining….. are the key points to remind that the SPORTY® range of Lemaitre Sécurité is one of the safest on the market for foot protection, in spite of its innovative looks similar to a casual shoe.
SPORTY® benefits also from an exclusive Lemaitre Sécurité patent: the Parabolic® sole featuring a curved cross-section which offers optimal grip and comfort for the wearer. The injected sole insures good ventilation of the foot and optimum perspiration management.
The SPORTY range finally demonstrates that safety footwear no longer needs to be hidden away! By combining its creative talents with state-of-the-art technology, Lemaitre Sécurité has product a safety shoe that looks great, is comfortable and is as light as a casual shoe.
|
|
- Moulded waterproof ankle boot (stitched tongue gusset
with lacing through waterproof rings ).
- Edged collar .
- Same chemical and mechanical resistance as the
SECUREX range from which it was developed.
- Same sole and lining.
- Average height: 120 mm.
|
|
|
Lemaitre Safety produces and sells safety shoes under the Lemaitre brand. As a specialist, Lemaitre Safety controls all the stages of manufacturing, including business intelligence, creation, development and industrialization. With more than 2.500.000 pairs per year, Lemaitre Safety is one of the most sold brand of safety shoes in the world : 55% of the turnover coming from exports and presence in 80 countries
|
|
ABSOLUTE SAFETY SHOE
EN 345 - S1P
TOPJOGGER
Sole Dual density PU
Toecap Steel
Midsole Steel
Size Range 36-47
Category S1P
Lining Cambrella
Insole Premoulded
|
|
cosmos S3 EN 20345
Sole PU/TPU
Toecap Composite
Midsole Kevlar
Size Range 38-47
Category S3
Lining Cambrella
Insole Premoulded
|
|
|
Ottawa S2: Leather stem, sole PU2D calendered not Woven lining, end, steel, fitting extra broad, also exists in composite.
|
|
EN ISO 20345 S1P
Metallic toe cap to 200joule, lighter in weight and more comfortable
Metallic midsole providing puncture resistance
Water resistant leather uppers
Rubber sole unit for excellent grip
Anti-static
Breathable moisture wicking linings for extra comfort
Soft padding around tongue and collar areas
|
|
Code L 4030/2
Upper Microfiber, white color
Lining white color, absorbent, moisture wicking, high scratch resistance, anti-bacterial
Fussbett Removable, two layer, anti-static, soft latex foam inside
Sole Double density polyurethane, anti-static, non-slip, oil resistant, anti-corrosive
* Steel or Composite material crush-proof toe cap
* Steel or non metal pierce proof layer
Sizes
Steel toe cap 35 to 48
Composite material toe cap 35 to 47
Safety categories S2, S3
Fit 11 MONDOPOINT
Conformity EN ISO 20345:2004
|
|
GALOSCHE N food industry / White-Grey
COD: FS00 W1P1 00 (OB - A - FO)
Homologation: EN ISO 20347:2004
Upper: nitrile PVC
Lining: Polyester.
Sole: nitrile PVC
Sizes: 35/47
Weight: Gr 830
Packing: each pairs in polybag// 12 pairs per carton
Characteristic: Wide last for the best comfort.
Shock absorbing in the heel area. Antistatic.
Resistant to animal fats (ISO 6112-92).
Norms: EN ISO 20347:2004 issued by CIMAC Vigevano (Pv)
Use: food industry
|
|
In the food industry, workers must be protected from slipping and cleanliness must be maintained. It is essential that footwear is hygienic, easy to maintain and comfortable.
Upper: high quality perforated leather with strap.
Internal lining: leather.
Sole: Non-slip Softane
Standard: EN 346-1 PB A E
Toecap: 100 J steel.
Antistatic
Performance:
Easy to put on and take off.
Comfortable leather linings
Fatigue reducing Heel System.
|
|
To meet the needs of the food industry and medical establishments.
Loafer type low shoe.
Upper in white Aseptane. Microfibre impregnated with resin to give optimum breathability combined with unrivalled water-proofing. splash and grease-proof. Easy to clean.
Fitted with a perforated 200 Joule steel toe to ensure good ventilation of the foot.
Outsole in multifunction TRIFTANE to give incredible grip:
- The intermediate layer in Softane absorbs shock to the heel
- The tread pattern on the sole correspond to the areas where the foot places pressure
- The protective grid ensures that the whole sole is robust
Standard: EN 345-1 S2 HRO
Sizes: 35 – 47 (2-12)
|
|
ADVANCED AGRO SAFETY SHOE
EN 345 - S2
X0500
Sole Dual density PU
Toecap Steel
Midsole Steel
Size Range 36-47
Category S2
Lining Cambrella
Insole Premo
|
|
Code C 2248
Upper Grain leather, brown color
Lining dark brown color, absorbent, moisture wicking, high scratch resistance, anti-bacterial
Fussbett Removable, two layer, anti-static, soft latex foam inside
Sole Double density polyurethane, anti-static, non-slip, oil resistant, anti-corrosive
* Steel or Composite material crush-proof toe cap
* Steel or non metal pierce proof layer
Sizes
Steel toe cap 36 to 48
Composite material toe cap 36 to 47
Safety categories S2, S3
Fit 11 MONDOPOINT
Conformity EN ISO 20345:2004
|
|
D1-3020 D1-3020 S1p / D1 3020 s1
Safety shoes
Conform to the standards EN ISO 20345:2004
Upper: suede leather
Lining: S-Air®
Toecap: extra large AM
PU Sole : D1 (PU/Dual Density)
Characteristic: protection padded tongue.
Holes for a perfect breathing
|
|
|
|
Safety shoes, Safety boots
