|
|
To cope with unpredictable situations: very uneven and dirty ground, frequent changes of workplace, difficult climatic conditions.
Cross-country walking type safety boot of original design, with a 200J steel toe and a midsole of pierce-resistant steel.
Upper in finest quality leather with brown water-repellent pull-up finish, with an ergonomically designed reinforcement in TPU at the front and back to make it more robust and give longer life
J-ESCAPE Outsole:
- Progressive shock absorber to protect the back and joints from vibration and impact.
- Resists contact heat up to 300°C
- Multidirectional self-cleaning deep tread, for maximum adhesion in any situation.
Standard: EN 345-1 S3 HRO.
Sizes: 38 – 47 (5-12)
|
|
|
Mustang: a concentrate of safety and comfort, ESD protective End ABG (200 joules IN ISO 20345-1), fitting ergonomic, anatomical arch of the foot and insert anti-perforation (IN ISO 20344-1) for safety, lining Cambrelle ® for comfort. Very modern design and sporting look non-skid Sole SPORTY®, with the profile curves Parabolic® (exclusive patent of Lemaitre Sécurité). The concave structure of this sole supports an excellent adherence on all the industrial grounds. Moreover, during walk, after the phase of crushing, energy is restored thus causing a dynamic effect; an effect arises anti-tiredness. Model MUSTANG is ESD (ElectroStatic Discharge), i.e. it protects from the electrostatic discharges. It is consequently particularly recommended, inter alia, in the car industry (cabins of painting), electronics, etc… Aired model, out of leather flower black, very comfortable and which lets well breathe the foot.
|
|
|
|
|
|
ELECTROINDUSTRIAL
Sole
- Polyurethane mono-density
- Adherence: SRC
- Density: 0,53
- Thickness: 6 mm
- Height of cramps: 2,6 mm
- Abrasive resistant (loss of volume): 157 mm3
- Tear strength: 5,7 kN/m
- Flexural strength (after 30.000 cycles): 0 mm
- Resistance to hydrocarbons: 3%
- With or without sole antiperforation
Stem
- Leather Stem full damp-proof flower and oléofuge.
- Calendered ventilated antisudation and antimycosic not woven Lining.
"More" produced
- Inner sole great comfort, antisudation and antimycosic.
- Polyurethane mono-density Sole for a better comfort and more lightness, resistant to oils and hydrocarbons.
- Cambered support of arch of the foot, heel taken down for unevenness, end steel resistant to 200J,
- "SHOCK ABSORB®": integrated shock absorber offering a true feeling of "bounce".
- E.S.D./ELECTROSTATIC DISCHARGE:
Electrostatic shoe: shoe whose electrical resistance is higher than 50 kOhms (0,05 MOhms) and lower than 100 MOhms
Standards of references = IN 61340-5-1 (supplemented by reports IEC 61340-4-3 and IEC 61340-4-5
Symbol marking = ESD + triangle drawn with the top of marking ESD.
|
|
• White leather upper
• High wicking lining
• SFC™ rubber outsole providing comfort and durability and excellent slip resistance and flexibility
• Lightweight EVA footbed
• Antistatic
|
|
Code L 2150
Upper Printed leather, black color
Lining black color, absorbent, moisture wicking, high scratch resistance, anti-bacterial
Fussbett Removable, two layer, anti-static, soft latex foam inside Sole Double density polyurethane, anti-static, non-slip, oil resistant, anti-corrosive
* Steel or Composite material crush-proof toe cap
* Steel or non metal pierce proof layer
Sizes Steel toe cap 35 to 48
Composite material toe cap 35 to 47
Safety categories S1, S1P
Fit 11 MONDOPOINT
Conformity EN ISO 20345:2004
|
|
D1-6500 D1-6500 S3 / D1-6500 S2
Safety shoes
Conform to the standards EN ISO 20345:2004
Upper: leather
Lining: antiabrasion texile
Toecap: extra large AM
PU Sole : D1 (PU/Dual Density)
Characteristic: leather protection padded tongue
|
|
CHIMIE SA Boots (safety toe cap + anti-perforation mid-sole)
Excellent resistance to chemicals : fuels, oils, greases, solvents, weak and diluated acids, phytosanitary products.
Excellent resistance to abrasion and cuts.
Comply with standards :
ISO EN20345 S5 HRO CR AN SRC
Heel energy absorption.
Antistatic.
Contact heat resistance (HRO)
Cut resistance (CR)
Ankle protection (AN)
EN 13832-3 K O P
Boots highly resistant to chemicals :
Sodium Hydroxide(K)
Ammonia Solution (O)
Hydrogen Peroxide (P)
EN 13287
Sole slip resistance (SRC) :
- Ceramic floor.
- Steel floor.
* made of steel for sizes 3 and 4,5.
|
|
Behind every man is a good shoe, and with the new Aristocrat, you're the man.
Send a message to colleagues and superiors that demands respect with its sleek contouring enhanced with our SFC III™ Slip-Resistant Outsole.
Buffer the stress of hectic work weeks with cushioned insoles, and lessen the impact of long days with outsoles designed to absorb shock.
Premium full grain leather makes this the savvy choice for any decision-maker. Get the respect you deserve with the Aristocrat, a superior shoe for every man.
|
|
For everyday wear. They are practical, comfortable and elegant, and suitable to be worn with city clothes or uniforms.
City-style work shoes, from the Allegro range from Jallatte.
Full grain leather with a leather lining for optimum wearer comfort.
Featuring the Dynam’Air concept. This ventilation system, built into the shoe, is based on the generation of an airflow around the foot, to keep it dry, which is continuously renewed by the natural movement of walking.
The sole is stain and hydrocarbon-resistant
Standard: EN 347-1 ORO E
Sizes: 6 – 12
|
|
HYPALON SA Boots (safety toe cap + anti-perforation mid-sole)
Excellent resistance to corrosive chemicals, particulary to concentrated and hot acids, fuels and solvents.
Excellent resistance to abrasion and cuts.
For use with protective clothing in hostile environments.
Comply with standards :
ISO EN20345 S5 HRO CR SRC
Heel energy absorption.
Antistatic.
Contact heat resistance (HRO)
Cut resistance (CR)
EN 13832-3 B L M N
Boots highly resistant to chemicals :
Acetone (B)
Sulfuric acid (L)
Nitric acid (M)
Acetic acid (N)
EN 13287
Sole slip resistance (SRC) :
- Ceramic floor.
- Steel floor.
* made of steel for sizes 3 and 4,5.
|
|
ABSOLUTE SAFETY BOOT
EN 345 - S5
HERCULES
Sole PVC
Toecap Steel
Midsole Steel
Size Range 38-47
Category S5
Lining
|
|
Cut resistant boot aimed at forestry experts working with chain saws.
Class II protection and S3 version against impacts and puncture.
|
|
TST SA 20000V Boots (safety toe cap + anti-perforation mid-sole)
Electrically insulated boots that protect workers from risks of pace voltage when there is a line-to-ground voltage fault during an intervention on alternative current 20 000V nominal voltage power supply network.
Made of dielectric rubber.
Individually tested.
Comply with standards :
Specification EDF : HTA 70B
Individually tested at 13 000V
Maximum leakage current 7mA
ISO EN20345 SBPE CI SRC
Perforation resistant (P)
Heel energy absorption (E)
Cold Insulated (CI)
EN 13287
Sole slip resistance (SRC) :
- Ceramic floor.
- Steel floor.
* made of steel for sizes 3 and 4,5.
|
|
CityZen range
Sirius S3Ci: « Derby » design with black full-grain leather, supple and resistant. Leather lining. AMS Concept (non-magnetic system)
AMS Concept (non-magnetic system) : fully non-metallic hence non-magnetic, the styles benefiting from this technology have multiple advantages :
>> Impervious to thermal variations and transfers,
>> Undetectable by security scanners,
>> Exceptionnally comfortable,
>> Lightweight, without any concession to safety.
Lightweight and very resistant protective toe cap in polycarbonate (200 joules - EN ISO 20345).
Anti-perforation insert in para-aramide material, lightweight, flexible, unalterable, resistant to perforation over 100% of the surface of the sole (EN ISO 20345).
Recommendations : for all personnels in civilian attire or in uniform, from offices to workshops, in controlled areas, in airports, in warehouses, etc.
|
|
ABSOLUTE SAFETY SHOE
EN 345 - S3
X1110
Sole Dual density PU
Toecap Steel
Midsole Steel
Size Range 38-47
Category S3
Lining Cambrella
Insole Premoulded
|
|
D2-65 MW S1/S1P microfibra
D2-65 MW S2/S3 microfibra
D2-65 LW S2/S3 Lorica®
Safety shoes
Conform to the standards EN ISO 20345:2004
Upper: microfiber or Lorica®
Lining: antiabrasion textile
Toecap: extra large AM
PU Sole : D2 (single density PU)
Characteristic: Nylon hooks
Padded protection tongue
Split half insole to protect socks
|
|
FIREMAN SA Boots (safety toe cap + anti-perforation mid-sole)
Excellent resistance to heat contact, heat flow, fire.
Excellent resistance to chemicals : fuels, oils, greases, solvents, weak and diluated acids.
Excellent resistance to abrasion and cuts
For use with protective clothing in hostile environments.
Comply with standards :
EN 15090 type 3
Boots suitable for emergency situation or fire involving release of hazardous chemicals that can cause loss of life.
EN20345
S5 HRO SRC
Heel energy absorption.
Antistatic.
Contact heat resistance (HRO)
EN 13832-3 J K R
Boots highly resistant to chemicals :
n-Heptane (J)
Sodium Hydroxide(K)
Sodium Hypochloride (R)
EN 13287
Sole slip resistance (SRC) :
- Ceramic floor.
- Steel floor.
Marine fire protection equipment certified by VERITAS, notified body N°0062
* made of steel for sizes 3 and 4,5.
|
|
BOOT OF FIRE
Sole
- Sole rubber nitrile
- Coeff. of adherence to smooth and fatty industrial grounds: 0,17
- Density: 1,15
- Thickness: 7 mm
- Height of cramps: 6,5 mm
- Abrasive resistant (loss of volume): 86 mm3
- Tear strength: 11,4 kN/m
- Flexural strength (after 30.000 cycles): 0 mm
- Resistance to hydrocarbons: 1,5%
- Sole antiperforation
Stem
- Stem leather full damp-proof flower and oléofuge.
- Fully-lined imper-breathing SYMPATEX®.
"More" produced
- Inner sole great comfort.
- Matelassé Bellows. Calendered ventilated antisudation and antimycosic not woven lining.
- Very resistant Sole ALPEX, very notched out of rubber nitrile, particularly resistant to oils, hydrocarbons and the strong temperatures (>300°).
- True bent Goodyear.
- Non-skid Relief of wear of a dynamic adhesion coefficient very high.
|
|
RANGERS TST
Sole
- Sole rubber nitrile
- Coeff. of adherence to smooth and fatty industrial grounds: /
- Density: 1,15
- Thickness: 7 mm
- Height of cramps: 6,5 mm
- Abrasive resistant (loss of volume): 86 mm3
- Tear strength: 11,4 kN/m
- Flexural strength (after 30.000 cycles): 0 mm
- Resistance to hydrocarbons: 1,5%
- With sole antiperforation
Stem
- Stem leather full damp-proof flower and oléofuge.
"More" produced
- For Work Under Tension (answering specifications EDF of the m.t. N°70/Résistance up to 5.000 Volts has).
- First of leather assembly.
- Sole of wear rubber nitrile, particularly resistant (thanks to its traditional bent assembly) to oils,
with hydrocarbons and the strong temperatures (>300°).
- Bent double assembly, flexible, traditional with two seams.
- Non-skid Relief of wear of a dynamic adhesion coefficient very high.
- Lacing and closing with loop for a fast opening.
- Wire of seam pitched for a better resistance and sealing.
|
|
Salisbury has the exclusive Dielectric ANSI Z41 Footwear and ASTM F1117 Dielectric Footwear.
All Dielectric ANSI Z41 Footwear:
- 100% Waterproof
- Super Dielectric tested to 20,000 volts
- Dielectric tested to 14,000 volts
- Premium grade ozone resistant rubber.
- Nonmetallic buckle hardware
All ASTM F1117 Dielectric Footwear:
- All overshoes conform with ASTM F1117 "Standard Specification for Dielectric Overshoe Footwear" and are tested to ASTM F1116 @ 20kV.
- Premium grade ozone resistant rubber.
- Flexible hand-layered construction-100% waterproof
- Nonskid Bar Tread outsole
- Nonmetallic buckle hardware
- Designed to provide utility workers and contractors additional protection from electrical hazards.
- Made in U.S.A.
- Nonmetallic buckle hardware
|
|
|
Rangeboot BG S3 for oil industry leather full flower with sole: PU2D, textile sole antiperforation, end: Lightspace composite.
|
|
Responding to the need for comfort and flexibility, together with resistance to hydrocarbons and abrasion, in especially harsh working conditions.
Safety boot that has become the oil industry standard since it was created.
Its natural full grain AP 23 leather is oil and water-repellent. The specific curing process makes it flexible, breathable and long-lasting. It is 10% thicker than most other leathers and its resistance to water vapour is three times greater than the regulations in the EN 344 standard ( 180 mn / 60 mn )
Dual-density SOFTANE walking sole:
- Inert to contact with oils and hydrocarbons
- Antistatic
- Featuring the progressive heel shock absorber to protect your back and joints from shocks and vibrations
Standard: EN 345-1 S3
Sizes: 4 – 13
|
|
ABSOLUTE SAFETY SHOE
EN 345 - S3
X0600
Sole Dual density PU
Toecap Steel
Midsole Steel
Size Range 36-47
Category S3
Lining Cambrella
Insole Premoulded
|
|
ABSOLUTE SAFETY SHOE
EN 345 - S1P
BESTSUN
Sole Dual density PU
Toecap Steel
Midsole Steel
Size Range 38-47
Category S1P
Lining Cambrella
Insole Premoulded
|
|
D1-9000 D1-9000 S2 / D1 9000 S3
Safety shoes
Conform to the standards EN ISO 20345:2004
Upper: leather
Lining: warm fur
Toecap: extra large AM
PU Sole : D1 (PU/Dual Density)
|
|
|
|
Safety shoes, Safety boots
