|
|
Fire flash with omnidirectional luminous great power.
Luminous flow amplified by a built-in lens of FRESNEL
Possibility of dry operation per salvo of 2 flashes/, reinforcing the effectiveness of the signal
Long life of life
2 operating processes:
- 60 F.P.M. are an luminous intensity of 10 joules
- 90 F.P.M. are an luminous intensity of 7.5 joules
The passage from 60 to 90 F.P.M. is done by simple displacement of a microphone-switch on the electronic chart or displacement of a rider on the bulb. Base DIN
|
|
Smallest of optical indications, recommended for the desk, control boards, order and cupboard.
60 F.P.M.
Luminous power 1 joule.
Compactness: Diam 70mm X H 30 Misters.
Discrete, easy and effective assembly projecting.
Extra profile low - great effectiveness.
Integrated device of removal of the parasites.
Power flash: 1 Watt.
Lifespan: 100.000 hour
|
|
|
|
|
|
New DA135 Intrinsically Safe LED Beacon from RTK Instruments
RTK Instruments has developed a new range of LED Beacons, which provide powerful visual alarm signals in both hazardous and safe areas. The DA135 is ATEX certified for use in Zone 0, 1 or 2 hazardous areas and is available in five super-bright colours. The ruggedised and encapsulated enclosure makes this an ideal choice for the harsh environments found offshore and in the chemical and petrochemical industry.
The standard unit has a unique method of allowing the user to change the flash rate between single, double or triple flash by triggering control inputs. Customers can then use the same unit to indicate different site problems. A dual colour version is also available where each colour can be triggered separately from the control inputs
The DA135 can be operated alone or in conjunction with an intrinsically safe Sounder and Pushbutton to create a fully featured single point Alarm Annunciator.
RTK Instruments is a leading supplier of safe and hazardous area alarm, display and interface products and can provide specific application advice, as well as product recommendations and installation assistance.
|
|
Blinkers
P123022 - PRL
Protective gauge for LAMPO series blinkers.
D123013 - SLM2
Blinker support for wall applications.
D113696 00003 - LAMP NET
Lamp Net blinker with extractable self-learning FAST-NET receiver for MITTO series rolling code transmitters.
D113686 00001 - LAMPO
AI 24V
Blinker powered at 24Vac/dc with integrated antenna. 4 m antenna cable. Only for receivers operating at a frequency of 433.92Mhz.
D113685 00001 - LAMPO AI 230V
Blinker powered at 230Vac with integrated antenna. 4 m antenna cable. Only for receivers operating at a frequency of 433.92Mhz.
D113719 00003 - RAY X 24V
Blinker powered at24Vac with integrated antenna.
D113719 00002 - RAY X 230V
Blinker powered at 230Vac with integrated antenna.
D113721 00002 - RAY X SA 12V
Blinker powered at12Vac without integrated antenna.
P123023 - RWS
Ray blinker support for wall applications.
D113721 00003 - RAY X SA 24V
Blinker powered at24Vac without integrated antenna.
|
|
* NEMA Type 4X Enclosure
* Panel or conduit mounting
* 18 inch wire leads
The Edwards 104FIN Series AdaptaBeacon flashing halogen lights and 104FLED Series AdaptaBeacon flashing LED lights are designed to provide a bright visual indication utilizing special optics within a shatter resistant polycarbonate lens mounted on a polycarbonate/ABS blend base.
|
|
Range of fires flash AE&T: a varied range allowing you to announce a danger, a machine, an action, a situation, etc in industrial environment.
Our products can be used in interior as in outside and adapt to the conditions more extrèmes.
Our Xénon technology guarantees to you a strong visibility of our fires flash (from 2,5 to 30 joules).
Range:
- PMF: visibility reinforced by Fresnel effect of the cap
- AB/WB/DWB: reinforced against the shocks and vibrations
- FP: flexibility and reduced storage cost
- TL101/L101S: compact and encastrable
- WBR/Quadro: very severe environments
- PB: compact and powerful
Ask our booklet by contacting us on info@aet.fr (reference: DirInduFlash)
|
|
Federal Signal's Electraflash® Model 141 is an economical incandescent flashing light. The Electraflash is less than six inches high and six inches in diameter. It is available in five impact- resistant fresnel dome colors: amber, blue, clear, green and red. The 120VAC model is UL Listed and CSA Certified.
- Available in 12VDC, 24VDC, 36VDC and 120VAC
- Five dome colors
- Surface mount or integrated 1/2- inch pipe mount
- Type 3R enclosure
- UL Listed, CSA Certified
|
|
Standalone flashing lights, warning lights FEBOLIXA - Orange Flashing light 12 VDC, Xenon lamp 3 W
FEBOLIFA24 - Orange Flashing light 24 VDC, fi lament lamp 25 W
FEBOLIFA - Orange Flashing light 230 VAC, fi lament lamp 25 W
FEBOLA - Orange warning light 230 VAC, 12 V, fi lament lamp 25 W
|
|
|
|
|
|
A hazardous area Annunciator offering all the features and benefits of a safe area Annunciator from RTK Instruments
RTK Instruments’ NEX7250 Alarm Annunciator is a feature rich annunciator suitable for use in Zone 2 hazardous areas and designed to Type ‘n’ standards.
Designed to ATEX Directive 100a in accordance with EN50021:1999, the NEX7250 is based on the field-proven Series 725 Annunciator. Systems are available in a range of sizes and formats from 2 to 120 windows, in a choice of three different window sizes and six colours. Windows are illuminated by ultra-bright, ultra reliable LEDs.
As with all RTK’s range of Annunciators, ASIC technology is used in the NEX7250 to maximise reliability. This multi-redundant design ensures no single point can cause failure.
The standard unit comprises a wall mounting steel enclosure with hinged acrylic viewing window sealed to IP54. Options include panel mounting versions or stainless steel enclosures.
The NEX7250 is fully field-programmable for all standard ISA sequences plus a range of options. Units are equipped with dual common alarm and dual horn relays as standard. Options for RS485 serial interface and individual repeat relays per channel are also available.
RTK Instruments, as major suppliers of industrial alarm systems and components for safe and hazardous area, can also supply complete alarm systems and help with all industrial alarm applications.
For further information, please visit our website www.rtkinstruments.com or e-mail: enquiry@rtkinstruments.com or call our Sales Team on 01423 580500.
|
|
Federal Signal's Model 191X hazardous location steady burning light is rated for operation with any voltage from 24 to 250VAC or VDC and designed for hazardous locations where a visual signal is needed.
- 24- 250 VAC/VDC
- Six tempered glass dome colors
- Uses standard A- 19 incandescent lamp (40W- 100W)
- 3/4- inch pipe mount
- Dome Guard included
- Indoor/outdoor use
- Type 4X, IP66 enclosure
- UL and cUL Listed, CSA Certified
|
|
The IS-mC1 combined alarm sounder & L.E.D. beacon has been designed for installation in intrinsically safe environments (Zone 0). The IS-mini range also includes stand alone intrinsically safe alarm sounders and L.E.D. beacons and is definitely the most effective method of signalling in Zone 0.
Features:
- Zone 0, 1 & 2
- EEx ia IIC T4 (Tamb.-40 to +60°C)
- Maximum 100dB(A) output
- 49 alarm tones, 3 alarm stages
- Array of 6 high intensity L.E.D's
- Sealed to IP65
- ATEX, FM, IECEx
|
|
Sonos Sounder Beacon (DC)
A general purpose electronic sounder for fire, security and industrial applications; the Sonos Sounder Beacon is certified to EN54.
- Simple 'First Fix' installation (no second fix wiring)
- Smooth flow cabling for faster installation
- Quick connect/disconnect
- No locking screw required
- Tone and volume can be preset or adjusted off-base
- Weatherproof to IP65 (deep base units)
- Choice of lens colours
- Low current LED beacon as standard (xenon beacon available on request)
- Sounder and beacon can be controlled separately
|
|
|
|
|
|
Reliable, high-brightness visual indication of process conditions for safe and hazardous areas from RTK Instruments Ltd
The DA180 range of Giant LED Clusters, having a 66mm diameter lens, not only provides clear indication from a distance but is also visible from the side. Lenses are available in six super-bright colours and feature an integral current regulator to limit the current to 20mA. This ensures that all colours are matched to obtain consistent brightness across the range including white and blue. Up to two LED Clusters can be driven from a single IIC power source. The lamps are designed to provide a minimum of 100,000 hours of service life.
The DA180 Giant LED Clusters are ATEX Certified to Ex II 2G, EEx ia IIC T4 and are suitable for zones 1 and 2.
The LED Clusters can be supplied as loose parts or pre-mounted in a stainless steel or polycarbonate IP65 box ready for immediate installation on site.
The DA180 range of Giant LED Clusters can be linked into either the LN1000 Intrinsically Safe Alarm Annunciator or one of a number of safe area annunciators.
With the LED’s lower power consumption, low heat dissipation and long life expectancy, the DA180 is an ideal indicator for safe and hazardous areas alike.
|
|
IS-L101L L.E.D Beacon
► Zone 0, 1 & 2 Intrinsically safe
► Ex ia IIC T4 (Tamb.-40 to +60°C)
► Alarm accept function (with IS-A105N)
► Can be combined with the IS-A105N alarm
► Sealed to IP66
► ATEX, FM, IECEx
|
|
|
|
|
|
New DA135 Intrinsically Safe LED Beacon from RTK Instruments
RTK Instruments has developed a new range of LED Beacons, which provide powerful visual alarm signals in both hazardous and safe areas. The DA135 is ATEX certified for use in Zone 0, 1 or 2 hazardous areas and is available in five super-bright colours. The ruggedised and encapsulated enclosure makes this an ideal choice for the harsh environments found offshore and in the chemical and petrochemical industry.
The standard unit has a unique method of allowing the user to change the flash rate between single, double or triple flash by triggering control inputs. Customers can then use the same unit to indicate different site problems. A dual colour version is also available where each colour can be triggered separately from the control inputs
The DA135 can be operated alone or in conjunction with an intrinsically safe Sounder and Pushbutton to create a fully featured single point Alarm Annunciator.
RTK Instruments is a leading supplier of safe and hazardous area alarm, display and interface products and can provide specific application advice, as well as product recommendations and installation assistance.
|
|
The DA170 range of LED Clusters provides visual on/off indication of process conditions in safe and hazardous areas. Available in six super-bright colours - red, green, yellow, orange, blue and white - they are standard 22.5mm diameter and seal to IP65 to the panel door.
All six colours are fully current limited and take only 20mA. All are matched for equal brightness including the white and blue versions.
In hazardous areas it is possible to combine LEDs from a single Intrinsically Safe interface, two for IIC interfaces and four with a IIB interface.
The standard LED Cluster can also be supplied fully mounted in stainless steel boxes ready for immediate mounting on-side.
With the LEDs lower power consumption, lower heat dissipation and far greater life expectancy the DA170 is an ideal standard indicator for safe and hazardous areas alike.
|
|
The LN870 Light Tower provides visual on/off indication of process conditions in safe and hazardous areas. Configurable up to five tiers high in a choice of five super-bright colours (red, amber, green, blue and white), they can be built exactly the way you want.
Each tier has a unique prism cut lens and internal reflective cone to improve visibility and requires one LED lamp for illumination which is current-limited to take a maximum of only 2OmA. Available for hazardous area use in both zones 1 and 2, up to two tiers can be driven from a single IIC interface.
There is a choice of pole or direct mounting, both incorporating a special vibration absorber. With the LED's low power consumption, low heat dissipation and long life expectancy, the LN870 is an ideal indicator for safe and hazardous areas alike.
|
|
|
The Skyline Alpha series is based on a rubber housing with a transparent or red plastic cap. The six diode strips each with eight horizontally alligned LED´s exceed the minimum requirements of the ICAO of 10 cd explicit without dazzling. The Skyline Alpha 1 is the standard version without additional fastening material and can be mounted on stationary surfaces. Alpha 2 is pre-mounted on a mounting bracket and equipped with a 1-metre cable. The version Alpha 3 is also equipped with a mounting bracket and has an additional connecting box for simple and economic installation. For operation on masts, or at places where double safety is required, the design Alpha 4 is provided. This obstacle light has two lamps pre-mounted on a double arm and is easy to install by means of a connecting box. All designs are available with either a red or transparent cap with red LED´s.
|
|
The International Civil Aviation Organization (ICAO) has defined the specification for installation of Obstacle Warning Lights in the Annex 14 to the convention on international civil aviation, Volume 1 «Aerodrome design and operations» (July 1999).
The following structures are considered as obstacles to civil aviation:
- Factory chimneys
- Towers (Telecom, TV, …)
- High Voltage overhead cables
- Bridges
- High rise buildings
- Electrical power generation stations
- Cranes
The BA15 LED obstacle warning lights are conforming the ICAO requirement thanks to its luminous intensity of more than 10 cd. Furthermore, the use of LED offers huge benefits in terms of life time (more than 100 000 h), reliability and extremely weak electrical consumption (3W).
|
|
Range OPTASON: AE&T proposes a broad range of powerful and economic luminous indicators to you to meet your needs for indication in industrial environment: indication of defects, dangers, states, information, etc
Flexible range, you will find many technologies (Led, Flash Xenon, bulb incandescence) and many solutions (encastrables, turnings, angle jigs, etc) to answer the whole of your needs.
Lastly, the high index of protection and the long life of life of our products guarantee to you solutions adapted to your environment and your constraints.
Range:
O50: mini indicator encastrable
Led
Fix, flickering
O100: indicator encastrable
Incandescance, Led, Flash
Fix, flickering
0200/O300/O400: flat-bottomed indicator with accessories of fixing (foot/square)
Incandescance, Led, Flash
Fix, flickering
O350: indicator of indication with fixing angle
Incandescence, Led
Fixed
0300T/O400T: revolving fire
MBL/MB: seeing for very severe environments
|
|
ActiveLine is designed to indicate various operating states of machines and systems. The possible signalling colours green, yellow, red, blue and white are all shown in one single light element. Each colour can be preset to continuous light, blink light or flash light. The light is generated by use of lightemitting diodes. The model with sounder can also generate a penetrating signalling tone, with four adjustable sound levels.
The plastic housing, the stable foot and the sounder housing are made of impact-resistant thermoplastic. The cap consists of im-pact-resistant polycarbonate, and the stand-tube is made of aluminium.
|
|
Fires of regularization of the traffic
Plastic fire of high-quality resisting to UV
The reflectors and the lenses are sealed by a joint neoprene.
Diameter of the lenses: 200 mm
Luminous power 60 Watts
Tension: 230 V
1 element: 2 kg L 460 L 260. 335 mm
2 elements: 3,2 kg L 460 L 260. 670 mm
3 elements: 4,7 kg L 460 L 260. 935 mm
|
|
The NE series dome shape LED signal light provides increased visibility and years of maintenance-free operation.
* Size: 57mm diameter.
* Available in 24V DC (No polarity).
* Colors available in red, amber, green, blue and clear/white.
* Water and dust-tight IP65 construction.
* Dome is visible from top and sides.
* NPN/PNP open collector compatible.
* Terminal block allows easy wiring.
|
|
The PEW/PES dome shape LED signal light provides increased visibility and years of maintenance-free operation.
* Size: 82mm diameter.
* Available in 24V AC/DC, 100V AC and 200V AC versions.
* Dome is visible from top and sides.
* PEW-B type includes single-tone intermittent alarm with adjustable volume to 85dB at 1m.
* Colors available: red, amber, green and blue.
* Flashing function available in three different flash rates: 60 fpm, 120 fpm, 180 fpm.
* NPN open collector compatible.
* PEW: Meets IP54
PES: Meets IP23 (IP55 with optional rubber gasket SZ-210).
|
|
|
|
|
|
Werma has a vast range of LED beacons with different light signals e.g. permanent light, blinking light and flashing light. Furthermore there is a wide choice of sizes, colours, voltages and fixings available e.g. base mounting, tube mounting and bracket mounting.
This year (2009) a groundbreaking innovation in LED technology has opened up a completely new dimension in optical signalling. Enhanced Visibility System,or the electronic improvement of visibility, EVS for short, is the name WERMA has given to this latest development which promises to bring about a revolution in signalling technology. WERMA employs light emitting diodes for the EVS system. A microprocessor generates random light signals. This gives the light a very "agitated" character which proves highly effective in drawing attention.
Countless uses can be found in the industrial sector, public areas or warehouses.
The LED rotating beacon provides an intensive rotating signalling effect. These LED rotating beacons can provide extremely high light intensity up to 70 cd with low power consumption and high vibration resistance.
|
|
General Information
Deep base LED beacon designed to complement audible alarms in areas where people may may be present who are hard of hearing or where high ambient noise levels may exist. LED technology provides an excellent combination of brightness and low current consumption. Deep base supports rear or side entry cables
High brightness
Low profile design
Low current consumption
Simple to install
Specification
Brand: Menvier
Dimensions (mm): Dia 95 x D80
Weight (KG): 0.15
ANA Number: 5018986425354
Cable Entry: Rear or side
IP Rating: IP65
Vandal Resistant: No
Current Consumption: 3 - 6 mA depending on setting
|
|
IBL-IBM-IBS
# IBL-IBM-IBS LED-steady-/flashing beacon
# versatile usable panel mount beacon series
# 3 sizes 65 - 45 - 30 mm diameter
# selection of stead-/flashing function via terminal
# maintenance free - long lifetime
# PLC fit (leakage/inrush current)
# particular lens pattern for optimum light dispersion
# adapter for 30,5 mm bore holes
|
|
|
|
Visual alarms, Beacon lights, Stack lights
