|
|
NFS - 90 mm
# 90mm LED strobe/double strobe beacon
# very good brightness - highest optical efficiency
# specially designed and optimized lens/optics
# up to date LED-technology
# absolutely shock and vibration proof, maintenance free
# long life time approx. 50.000h
# low nominal current
# inrush current limitation, EMC safe, leakage up to 3mA possible
# modular design - mounting options horizontal, vertical and pole
|
|
Fire handling is ideal for indication on the machine tools, overhead travelling cranes,
The glass casing is out of orange polycarbonate.
Fire handling is equipped with a double lens of FRESNEL.
Protection against the inversion of polarity.
High index of protection: IP 54
Fixings: 3 bolts, tubes or bases magnetized.
Connection by connector blocks in the base.
Dimensions: High 121 mm, diam. 130 Misters.
O ring between the base and the dome.
Exist in various colors, orange, red, blue, green, transparency and white.
Lamp with Xenon 1.5 joules, longevity: 3 million flashes
The number of glares per minute for a tension of 50V is of 70 Flashes per minutes
Joint anti-vibration included
|
|
The RKE/RHE series LED revolving warning light provides increased visibility and long service life with high power LED.
* Size: 100mm diameter.
* Available in 12V DC, 24V DC, 100V AC and 200V AC versions.
* Colors available: red, amber, green and blue.
* RKEB/RHEB series has an integral alarm (high-pitch tone 90dB at 1m).
* No bulb replacement needed with long service life LED, perfect for "hard-to service" locations.
* Dome is made of heat and shock resistant polycarbonate resin.
* IP23 (IP55 with optional rubber gasket SZ-200A).
|
|
The RFV series is a combination of LED rotating beacon light and MP3 programmable sound unit
* Available in 24V DC, 100V AC and 220V AC
* Volume is adjustable from 0 to 95dB (at 1m)
* Colors available: red and amber
* Units are shipped completely pre-wired and pre-assembled
* Voice message or sound data is field-programmable with SD card (SD card
is sold separately)
* Total recording time of 64 seconds (64kbit/s) can be divided up to 4
channels by bit input or 15 channels by binary input
Available by Special Order
* PNP open collector transistor type
|
|
The LCE series offers the latest in LED technology.
Versatile and energy efficient.
* Size: 40mm diameter.
* Available in 24V AC/DC and "Free-Voltage" 90-250V AC versions.
* FB types include two selectable, single-tone intermittent alarms with adjustable volume to 85dB at 1m.
* Colors available: red, amber, green, blue and clear/white.
* LED modules are interchangeable and stackable after purchase (up to 5 modules).
* Units are shipped completely pre-wired and pre-assembled.
* Pole mount versions include 300mm steel pole and mounting bracket (SZ-012) with nuts and washers.
* NPN or PNP open collector compatible (24V type), and NPN open collector compatible (90-250V type).
* LCE-FB & LCE-FBW: Meet IP54
LCE-W: Meets IP65.
* Optional mounting brackets available.
LCE-U type
* Available in 24V AC/DC only.
* Silver color body.
* Versatile and flexible 3 meter jacketed cable.
|
|
The LME series offers the latest in LED technology.
Versatile and energy efficient.
* Size: 60mm diameter.
* Available in 24V AC/DC, 100V AC and 220V AC versions.
* FB types include two selectable, single-tone intermittent alarms with adjustable volume to 90dB at 1m.
* Colors available: red, amber, green, blue and clear/white.
* LED modules are interchangeable and stackable after purchase (up to 5 modules).
* Units are shipped completely pre-wired and pre-assembled.
* Pole mount versions include 300mm steel pole and mounting bracket (SZ-013) with nuts and washers or 300mm aluminum pole and plastic top mount bracket.
* NPN or PNP open collector compatible (24V type), and NPN open collector compatible (100V AC or 220V AC types).
* LME-FB & LME-FBW: Meet IP54
LME-W: Meets IP65.
* Optional mounting brackets available.
LME-U type
* Available in 24V AC/DC only.
* Silver color body.
* Versatile and flexible 3 meter jacketed cable.
|
|
The MP series super slim 30mm silver color body signal tower is ideal for small devices.
* Size: 30mm diameter.
* Short body length type is also available (MPS).
* Available in 24V AC/DC.
* Colors available: red, amber, green, blue and clear/white.
* LED modules are interchangeable and stackable after purchase (up to 5 modules).
* NPN or PNP open collector compatible.
* Water and dust-tight IP65 construction.
* Units are shipped completely pre-wired and pre-assembled.
|
|
|
|
|
|
halfDOME90
# visual-audible LED-signal tower in half dome design
# for universal industrial, building and other applications
# any colour combination and housing size (2-5 positions) available
# 6 lens colours, 2 housing colours (grey, chrome)
# LED-steady light or LED-flashing light for each position selectable
# high protection class IP 65 - suitable for outdoor and indoor
# for horizontal and vertical mounting
# particular lens optics with reflective coating
- optimal signalling and visibility from each viewing angle (180°)
- "moving" bright LED-light
# optional piezo buzzer in upper housing area available
- tone types continuous and pulsing
- volume individually adjustable ~70 - 90 dB (A) in 1 m
# SPS-fit (leakage, inrush current)
# available in nominal voltages 24 V AC/DC, 110/120 V AC, 230/240 V AC
# UL-certified - UL 4, 4X, 13
NOTE: The supply voltage 24 V AC/DC, 110/120 V AC or 230/240 V AC is determined by selecting the housing in the desired voltage. The built-in light and sound modules always operate with 24 V only.
|
|
Monolithic indicator banks Ø 40, 60, 100 mm
Description
Indicator banks Ø 40, 60 & 100 mm
Simplicity and speed of installation thanks to pre-cabled and pre-assembled products
Base mount: pole or base mount
Source light: LED
- guaranteed long life and maintenance free thanks to high resistance of LEDs to mechanical shock and vibration
- energy saving design with low power consumption
IP 54
Color of illuminated units: Red, Yellow, Green, Blue, White
Voltage: AC/DC 24V (DC 24 V : XVC1)
Type of illuminating effect: steady/ and/or blinking
Sound level [dB]: 70 to 85 or 60 to 85
Buzzer in option
Standards and certifications: CE, UR
Manufactured in conformity with the requirements of the RoHS (Restriction of Hazardous Substances) European Directive.
|
|
|
|
|
|
Get the attention you need with LKEH series signal tower with voice message/audible alarm hybrid unit.
* Available in voice message type (LKEH-FV) and 32 pre-recorded sounds type (LKEH-FA/FC/FD/FE)
* Size: 100mm diameter
* Available in 24V DC, 100V AC and 220V AC versions
* Volume is adjustable from 0 to 105dB at 1 meter
* Continuous or flashing light
* Colors available: red, amber, green, blue and clear/white
* LED modules are interchangeable and stackable after purchase (up to 4 modules)
* Units are shipped completely pre-wired and pre-assembled
LKEH-FV (Voice synthesizer)
* Voice message or sound data is field-programmable with SD card (SD card is sold separately)
* Total recording time of 64 seconds (64kbit/s) can be divided up to 5
channels by bit input or 31 channels by binary input
LKEH-FA/FC/FD/FE (32 pre-recorded sounds)
* 32 sounds are pre-recorded in one unit. 4 sound types are available
* Select one sound group to play back 8 sounds by bit input or 32 sounds can be played back by binary input
Available by Special Order
* PNP open collector transistor type
|
|
General Information
Low profile LED beacon designed to complement audible alarms in areas where people may may be present who are hard of hearing or where high ambient noise levels may exist. LED technology provides an excellent combination of brightness and low current consumption
High brightness
Accepts side entry or surface cables
Low current consumption
Simple to install
Specification
Brand: Menvier
Dimensions (mm): Dia 95 x D53
Weight (KG): 0.1
ANA Number: 5018986425347
Cable Entry: Rear
IP Rating: IP54
Vandal Resistant: No
Current Consumption: 3 - 6 mA depending on setting
|
|
Signal lamps with integral filament lamps/LEDs or with lamp sockets
Signal lamps with integral LED, mounting hole diameter 5 - 10 mm
Signal lamps with integral filament/neon lamp, mount.hole.diameter 5 - 14 mm
Signal lamps with lamp sockets, mounting hole diameter 9 - 30 mm
Panel mounting sockets, tubular lamp holders
|
|
Everel offers an exceptionally wide range of signal lights in a variety of shapes, sizes and colours that come with different types of light source (neon bulbs, incandescent or luminous LED).
Everel is Europe's number one manufacturer of signal lights, selling upwards of 40 million per year. Thanks to the flexibility of its solutions portfolio, Everel signal lights are used in a multitude of different industries in every part of the world.
|
|
The LU5 series versatile modular system signal tower light is perfect for OEMs that offer the light in different color combinations for their machine design.
* Size: 50mm diameter.
* Available in 24V DC.
* FB types include two selectable, single-tone intermittent and continuous alarms with@volume up to 85dB at 1m.
* Colors available: red, amber, green, blue and clear/white.
* Pole mount is also possible. (Optional mounting parts sold separately)
* LED modules are interchangeable and stackable after purchase (up to 5 modules).
* NPN or PNP open collector compatible.
* Water and dust-tight IP65 construction.
Available by Special Order
* Silver color body type.
|
|
The LU7 series versatile modular system signal tower light is perfect for OEMs that offer the light in different color combinations for their machine design.
* Size: 70mm diameter.
* Available in 24V DC and “Free Voltage” 90-250V AC versions.
* Colors available: red, amber, green, blue and clear/white.
* LED modules are interchangeable and stackable after purchase (up to 5 modules).
* FB types include flashing circuit and two selectable, single-tone intermittent and continuous alarms with adjustable volume up to 90dB at 1m.
* NPN or PNP open collector compatible (24V type), and NPN open collector compatible (90-250V type).
* Water and dust-tight IP65 construction.
* Color of terminal block in base unit corresponds to the lens color for quick wiring.
* Pole mount is also possible. (Optional mounting parts sold separately)
* MP3 sound module (LU7-V1) and LED strobe flashing module (LU7-XE) are also available.
Available by Special Order
* Silver and black color body type.
|
|
The Spectra range has been designed to offer a complete visual signalling solution for industrial, marine and general applications.
The High output LED multifunction beacon is available in two sizes and allows to choose from a total of 9 user selectable operation modes:
- 4 rotating configurations
- 4 flashing configurations
- Steady mode for status applications
E2S’s wide range of beacons also includes :
- Halogen rotating beacon
- 5J Xenon strobe beacon
- Synchronised Xenon strobe beacon
- Multi-flash-frequency Xenon strobe beacon
- Halogen flashing / status beacon
- Filament lamp flashing / status beacon.
- Different sizes and a range of accessories including wall brackets and pole mounts are available.
|
|
The KHE Series is a multi-feature LED beacon with three selectable light patterns for diverse use. The clear lens makes it easier to see the light in bright ambient conditions.
* Size: 100mm diameter.
* Available in 24V DC (no polarity)
* Dome is visible from top and sides.
* Colors available: red, amber, green and blue.
* Lighting patterns available: simulated rotation, strobing and flashing
* Super bright LEDs provide long service life, maintenance-free operation.
* IP23 (IP65 with SZ-200A optional rubber gasket)
|
|
Federal Signal introduces the SemiStat® Status Indicator. Designed to meet the needs of the OEM market, the SemiStat is an attractive, easy-to-install and economical status indicator.
- Available in 24VAC/VDC
- Tri- or quad-color models
- Available in chrome (model SCC) or white (model SCB) finish
- 100,000 hour vibration resistant LED lamps
- Integrated sounder
- Surface mount
- Indoor use only
|
|
Beacons
A range of high-efficiency xenon visual warning lights 12 to 72 V and 12 to 80 V, 2 W and 5 W. Curtis safety beacons are designed for applications ranging from pallet trucks; construction and airport equipment; agricultural equipment; and forklift trucks - internal combustion or electric powered.
|
|
Warning light, buzzer and E-mail report to network manager immediately when network event occurs!
* Ethernet 10BASE-T/100BASE-T correspondent (selected automatically)
* HTTP, RSH, SMTP and SNMP protocols correspondent.
* Ping function monitors the health status of (up to) 16 IP devices.
* RSH and SNMP correspondent, and possible to cooperate with commercial
network management software.
* Reset switch can resume the system to the original status.
* Standard light configuration: red / amber / green.
* AC adaptor included. (for input voltage of 90-250V AC, Type A plug)
* Signal Tower Diameter: 25mm (NHE-3FB-RYG)
40mm (NHC-3FB-RYG)
60mm (NHM-3FB-RYG)
|
|
The PHE-3FBE1 series PC controllable LED signal tower light through the serial RS-232C connection is suitable to supervise your personal computer, server and / or workstation.
* Size: 40mm diameter (signal tower light)
* Connect with RS-232C cable directly to your PC, or by USB with converter.
* Two selectable single-tone, intermittent alarms with adjustable volume to 85dB at 1m.
* Reset switch can resume the system to the original status.
* Comes with standard light configuration: red / amber / green.
* RS-232C straight-through cable, AC adaptor required.
|
|
The PHC-100A interface converter can be connected to the RS-232C port on your programmed PC to control most PATLITE products, both visual and audible.
* 16 terminals provide 8 isolated non-voltage contact outputs.
* Reset push-button switch provided to reset all outputs to the off-state.
* Commercially available serial to USB converter can be used with this
converter for control from a USB port.
* AC adaptor is not included.
|
|
A16B Alarm Annunciator(604 600)
• Programmable with PC or other control devices
• Easy transitions between hardware / software configurations
• 3 port 2.5kVAC isolation
• High efficiency indicator LED’s in front panel
• Low power consumption
• DIN 19235 standard compatible signal functioning
• Removable signal labels
• Wide operation temperature range
The A16B is programmable industrial 16 channel alarm annunciator with different signalization options and compatible with DIN19235 standards. A16B alarm inputs interrogated with 24/110 AC/DC voltage. High isolation is provided between input, output and power supply circuits for maximum safety. A16B is DIP switch configurable and also programmable via Windows based software which allows easy and flexible configuration of input and output characteristics.
|
|
The RTK UC625 Alarm System, developed from the field proven P625 range of alarm annunciators, offers the latest in ASIC technology packed into an compact design for applications where panel space is at a premium.
However simple or complex your alarm requirement, the UC625 with compact packaging, ASIC Technology and "no master module" philosophy, will give the most cost-effective solution.
Programmable alarm sequence, signal duplicating relays, dual horn relays, LED display, proven ASIC technology and dual redundant universal power inputs make it ideal for all industry sectors.
|
|
The RTK System 9000 Alarm Annunciator offers the latest in combined ASIC/micro-controller technology to provide an annunciator of unparalleled reliability and programmability. The system gives complete flexibility and total security at an unmatched price.
Total integrity is provided by the unique "no master module" principle, with the "no master" PSU and communications. The flexibility offered is also second to none, with easily configurable setup of hundreds of options including alarm sequence, time delays, relay operation, first-up grouping, functionality, communications etc. The range of displays to match the System 9000 is extensive, from the low cost Series 300 to flexible window size lamp arrays, mosaic mimic diagrams and hard wearing single piece mimics.
|
|
Federal Signal Model 371 incandescent warning lights have a powerful sealed beam lamp that rotates 360º within a glass or polycarbonate dome. Power is delivered to the Commander's rotating lamp by a unique collector ring. The lamp itself is mounted in a pivoting yoke. This allows the lamp beam angle to be adjusted through 90 degrees from horizontal to vertical. Changing the beam angle allows the user to create unique light patterns and/or direct the light for better visibility.
- Available in 120VAC
- Five dome colors
- Pivoting lamp yoke
- Surface mount and integrated 1- inch pipe mount
- Type 4X, IP66 enclosure
- UL and cUL Listed, CSA Certified
|
|
|
|
|
|
|
Hazardous areas often require the use of optical signals for warning or information purposes. The EExII rotating beacon dSLD 21 offers both of these signalling features. It is designed for continuous operation. If the supply voltage is turned on, the rotating beacon dSLD 21 is activated.The device is available in several versions with various levels of operating voltage and and various signallingcolours. The stable, glass-fibre reinforced polyester (GRP) housing is made to the IP66 degree of protection and may be used indoors or outdoors. The II 2 G EEx de IIC T6 protection class enables the unlimited use of the signalling device in all hazardous areas, zones 1 and 2. The flameproof enclosure and the "increased safety" type of protection of the terminal room guarantee hazardous area protection. The upper part of the flameproof enclosure, which contains the electronic and the mounted halogen lamp, consists of a transparent Makroloncap. An inner cap lends colour to the light. The housing consists completely of GRP. Thus the device is protected against corrosion, and fulfills the requirements of contact safety class II. An equipotentiel bonding is not required. All outer fastening parts are manufactured in non corrosive materials.
|
|
Ideal fire turning for vehicle with magnetic base plate and catch lights cigar. It can also be installed in industry.
Halogenous source of light
For all our luminous to replace X by the code color
1=orange, 2=rouge, 3=bleu, 4=vert, 5= transparent 6= white
|
|
|
|
|
|
Award-winning: The Rotating Mirror Beacon 885 from WERMA
Following last year’s „red dot design award“, 2006 has seen WERMA re-ceiving another highly acclaimed international design prize: the new Ro-tating Mirror Beacon 885 has been awarded the „iF product design award 2006“.
iF design award – synonymous with current design trends
Since its establishment in 1953 the „iF design award“ has been a consis-tent, renowned hallmark for “excellent” design. The iF label is a clear in-dicator to product buyers that the goods in question are sophisticated and of a high quality, having passed the equivalent of a “Design Exami-nation”.
The winning product: the Rotating Mirror Beacon 885
The award winning Rotating Mirror Beacon 885 is an ideal addition to the existing WERMA product range. It stands out with its clear, no frills design and a new size. When in operation the new rotating mirror beacon gen-erates an extremely high signal effect due to the internal rotating mirror . For the observer the impression is almost that of a flash of light.
During the development of the Rotating Mirror Beacon great emphasis was placed on a stately design that was nevertheless both industry-compatible and functional. WERMA consciously designed the done to enable a clear view of the fascinating technology in its interior - thus cre-ating a successful interplay of appealing design and innovative technol-ogy.
The beacon also impresses with its long lifetime, guaranteed by the low wear wheel and disc drive.
|
|
Industrial Xenon Beacon (10J)
Flashguard industrial xenon beacons are available with a choice of voltages and colours.
Weatherproof to IP65, they are ideal for almost any industrial application.
- Choice of red, amber, blue, green and clear lens
- Weatherproof to IP65
- Choice of voltages
- Range of accessories available
Overview
Flashguard industrial xenon beacons are available with a choice of voltages and colours. Weatherproof to IP65, they are ideal for almost any industrial application.
Xenon beacons are available in either 10J or 24J units and are designed for surface mounting.
The 10J unit is a high intensity beacon with Fresnel lens which produces a penetrating light in the most adverse conditions. Suitable for larger areas, it can be selected for single or double flash.
A range of accessories is available including a protective cage guard and a wall bracket.
|
|
|
|
Visual alarms, Beacon lights, Stack lights
