|
|
| Products 91 to 120 of 132 |
* Bracket, ceiling, pendant or stanchion mount
* Diode polarized for use in electrically supervised circuits
* High impact glass dome, dome guard included
* 20W halogen bulb
* 75 rotations per minutes
* Factory sealed - no external seals required
* Quick connect - threads onto mounting module for easy installation
* Shock absorbing receptacle
* Easy to assemble & relamp
* Gaskets seal out dirt & moisture
* Epoxy powder coat for corrosion resistance
|
|
|
It is often necessary to use optical signals for warning, indicating and signalling purposes in areas where vibrations may occur. Such areas are machines, vehicles, cranes, and so on. The Signalling Light BLG LED provides this signalling capacity. The Signalling Light BLG LED is activated by turning on the supply voltage. It is available in various cap colours. The solid rubber housing conforms to protection degree IP 67 and is suitable for both indoor and outdoor use.The housing is made of solid rubber (elastic TPF). The cap consists of impact polycarbonate. The LED circuitboard contains 8 LED lines. It is switchable if half performance or full performance. The LED equipping is carried out in the repective cap colour.
|
|
|
It is often necessary to use optical signals for warning and indicating purposes in very noisy surroundings. The BLK LED emits clearly recognisable signals. The sturdy housing conforms to protection degree IP 65 and is suitable for both indoor and outdoor use. The signalling light is available in four different cap colours.The modern electronics are mounted on a printed circuit board of glass fibre reinforced epoxy resin. The weather-proof coated aluminium die- kast housing is equipped with a ribbed cap of impact-resistant plexiglass. The signalling light is provided with a M20 cable gland for cable diameters of 8 to 12 mm. Three modes (continous, blinking and flash light) are switchable.
|
|
* Weatherproof
* Internal, base mounted horn rated at 85 dB at 10 feet (3.05 m)
* Cast base can be utilized as a junction box
The Edwards 51SIN Series AdaptaBeacon steady-on lights with horns are designed to provide a bright visual indication utilizing special optics within a shatter resistant polycarbonate lens. The polycarbonate lens ensures efficient light dispersion. And, with no moving parts, the lights are immune to shock and vibration. Lenses available in six colors: red, amber, blue, green, magenta and clear. Unique base design allows sound audibility while maintaining the unit's weatherproof integrity.
|
|
Federal Signal's brightest and most compact strobe light, the Fireball® emits a powerful "lightning bolt" flash of light. Approximately five inches tall and four inches in diameter and rated at 300 effective candlepower, the Fireball is an economical solution to a wide variety of stationary and vehicular warning requirements. The Fireball is available in 12- 24VDC, 24VDC, 120VAC and 240VAC. All models are UL Listed and CSA Certified. The FB2PST is available in six colors - amber, blue, clear, green, magenta, and red.
- Available in 12- 24VDC, 120VAC and 240VAC
- Six dome colors
- 10,000 hour strobe tube
- Integrated 1/2" pipe and surface mount
- Indoor/outdoor use
- Type 4X, IP66 enclosure
- UL and cUL Listed, CSA Certified
|
|
* NEMA Type 4X Enclosure
* Panel or conduit mounted
* 300,000 peak candela
* 18 inch wire leads
* Immune to shock and vibration
The Edwards 104ST Series AdaptaBeacon strobes are designed for light duty applications in industrial, commercial and institutional applications where short term intermittent visual signaling is required. The strobe unit provides a bright indication utilizing special optics within a shatter resistant polycarbonate lens mounted on a polycarbonate/ABS blend base.
|
|
Federal Signal's Litestak® status indicator is a column of signal lights that indicate the status of a process or machine. The units may include up to five Light Modules (Model LSL) available in amber, blue, clear, green and red; or four light modules plus an optional Sound Module (Models LSS or LSH) to create a dual purpose audible/visual status indicator. The Sound Module always occupies the top position of a Litestak unit.
- Available in 24VDC, 120VAC and 240VAC
- Five lens colors
- Surface mount and integrated 3/4- inch pipe mount
- Indoor use only
- Type 1 enclosure
- Optional sounder available
- UL and cUL Listed, CSA Certified
|
|
|
|
|
|
WERMA KombiSIGN 71 – Modular Signal Tower System with high protection rating IP 65 and long-life LED
WERMA is extending its successful modular Signal Tower range with the addition of an attractive tower with a diameter of 70mm. The KombiSIGN 71 offers the high protection rating IP 65 for use in extreme conditions.
The unique KombiSIGN features, such as the practical bayonet fixing system facilitating simple operation and modular assembly, are once again incorporated into KombiSIGN 71. As a result of these features tool free bulb changes are possible with minimum effort.
KombiSIGN 71 offers the choice of two terminal elements; either an improved screwable connection or a terminal element with Cage Clamp® technology providing screw free wiring. This simple connection system is unique to WERMA and its KombiSIGN is the only signal tower on the market which offers this technology.
The large degree of variety within the range of optical and audible elements available and a comprehensive array of accessories make it easy to find the right Signal Tower combination for every application.
By means of Chip-On-Board technology a revolutionary and futuristic LED application has been employed in KombiSIGN 71. LED chips with a remarkably high visibility of 180° are bonded directly onto a gold-plated circuit board. This LED technology comes in the form of an LED Bulb 956 with BA 15d Socket, which is inserted into permanent light elements or as an LED permanent light element with integrated LED-COB. The LED elements have a life duration of up to 100.000 hours and a protective switch ensures current limitation and guards against surge voltage.
|
|
Bright flashing lights and loud alarms capture attention in busy industrial environments. Mounted on a control panel or machine, GE Light Tower signals a potential problem or required action before.
GE Light Tower offers a wide variety of visual options, AC and DC versions, global approvals (UL, CSA, CE) and flexible mounting options, for effective use in almost every situation. Suitable for NEMA Type 1, 3R, and 12 applications, Light Towers go where you need them - indoors or out, in commercial or harsh industrial environments.
Features and Benefits
Three different diameters - 45mm, 56mm, 85mm.
Steady lights can easily be change to flashing by adjusting a simple jumper (56mm and 85mm only).
New lens design produces 360B of bright, shadow-free, colored light for maximum visibility from a distance.
|
|
modulSIGNAL70
# modularly designed, versatile, flexible and powerful signal towers
# any desired combination possible for many different kind of applications
# complete range of visual and audible modules in all
conventional voltages
# extensive mounting options
# 6 lens colours
# PLC fit (leakage/inrush current)
# UL certified, Protection class IP 65, UL type 4, 4X, 13
# modulary construction with bayonet locking system
# fast and easy to operate, mount, configurate and change of modules
# troublefree and fingersafe bulb change at any position
without using any tools
NOTE: Light sources have to be ordered separately (except xenon tubes and fixed LEDs)!
|
|
modulSIGNAL50
# modularly designed, versatile, flexible and powerful
signal towers for smaller machines
# any desired combination possible for many different kind of applications
# complete range of visual and audible modules in all
conventional voltages
# extensive mounting options
# 6 lens colours
# PLC fit (leakage/inrush current)
# UL certified, Protection class IP 65, UL type 4, 4X, 13
# modulary construction with bayonet locking system
# fast and easy to operate, mount, configurate and change of modules
# troublefree and fingersafe bulb change at any position
without using any tools
NOTE: Light sources have to be ordered separate
|
|
The Edwards Triliptical Stackable Status Indicator is a unique audible-visual signaling device that can contain up to 5 light modules and a pulsating horn in a single “stack.” All modules are gasketed.
The Triliptical Stackable Status Indicator bases are available in three models. A shorter base for conduit or surface mounting or a larger base designed for use with an optional tone module assembly. The larger base is also available with an optional DeviceNet
|
|
|
|
|
|
Luminous columns and sound OPTASON: AE&T proposes to you the luminous and sound columns O270 presenting of many advantages:
- Facilitated Extrème of assembly
- Many choices of luminous modules: incandescence, Led, Flash
- Many choices of luminous effects: fix, flickering, turning
- Varied sound Modules: its fixed, its alternated, buzzer
- Accessories of fixing (squares, feet, etc)
You can thus create your own column meeting your specific needs by assembling to 7 different modules parmis the sound and luminous range suggested.
Very resistant (IP54 and 64), this range is also economic and weak consumer of energy.
Range of the luminous modules:
O270I: fixed light with incandescence
O270LF: fixed light with bulb with Led
O270LFC: fixed light or indicator with Led
0270F: fire flash Xenon
0270L: fire led multifunction (fixes, flickering or rotary) or mutlicouleurs (green orange red)
Range of the sound modules:
O270S85: its continuous or intermittant of 85dB with 1m
O270S90: 16 sounds different of 90dB with 1m (according to sound)
O270S95: its continuous or intermittant of 100dB with 1m
O270S85S: its continuous or intermittant of 85dB with 1m AND FIXED LIGHT
|
|
The Federal Signal Litestak® Sound Module is a microprocessor-based audible signaling device. The model LSS can be used as a stand-alone audible device or combined with the Federal Signal Litestak light modules to create an audible/visual signal.
- Available in 24VDC and 120VAC
- Modular unit fits on top of any Litestak® configuration
- Select one of 18 tones
- Capable of outputs between 59- 69dB @ 10' (69- 79dB @ 1m)
- Indoor use only
- Type 1 enclosure
- UL Listed and CSA Certified
|
|
General Information
High efficiency, amber xenon beacon designed for use in applications where visual warning is required such as areas where high ambient noise is present or areas where the occupants may be hard of hearing
Anti surge design
Choice of lens colours
Weatherproof deep base available
Specification
Brand: JSB
Dimensions (mm): Dia 93 x D72
Weight (KG): 0.28
ANA Number: 5018986229938
Cable Entry: Rear
IP Rating: IP20
Vandal Resistant: Yes
Current Consumption: 45mA
|
|
The WME series wall mount LED signal tower light offers seamless integration with most equipment.
* Size: Width 70mm, Depth 80mm
* Available in 24V AC/DC and "Free-Voltage" 90-250V AC versions.
* FB types include flashing circuit and two selectable, single-tone intermittent alarms with large volume up to 90dB at 1m.
* Colors available: red, amber, green, blue and clear/white.
* LED modules are interchangeable and stackable after purchase (up to 5 modules).
* NPN or PNP open collector compatible (24V type), and NPN open collector
compatible (90-250V type).
* Water and dust-tight IP54 construction.
* Units are shipped completely pre-wired and pre-assembled.
|
|
The WE series are Ultra-Slim wall mount signal lights that offer seamless integration with equipment.
* Ultra-slim 37.5mm profile.
* Available in 24V AC/DC.
* Body color is available in ivory white (WEP) and chrome plated (WE).
* FB types include flashing circuit and two selectable, single-tone intermittent alarms with volume to 90dB at 1m.
* LED colors available: red, amber, green, blue and clear/white.
* Units are shipped completely pre-wired and pre-assembled.
* NPN or PNP open collector compatible.
* WE and WEP: Meet IP65
WE-FB and WEP-FB: Meet IP54.
|
|
|
|
|
|
Flexible Alarm System supplied ready to mount on site
RTK Instruments now offer a Wall Mounting Annunciator range which is supplied as a finished Alarm System ready to mount onto a wall or vertical structure. The system is a fully operational Annunciator System complete with MCB, Power Supply, audible, control pushbuttons and terminals. The System can be supplied with a choice of different Annunciators depending on the application requirements, such as the 725B Alarm Annunciator/Event Recorder, the SIL725 Safety Annunciator, the Series 725 Programmable Annunciator or the UC625 Compact Alarm Annunciator.
All alarm ways are wired to terminals ready for direct connection on site through the bottom un-drilled gland plate. All that is required is the connection of the supply voltage and the alarm contacts. The Annunciators can be supplied in a variety of different enclosure materials: stainless steel, mild steel coated in epoxy polyester in light grey or glass reinforced polyester. The wall mounted boxes are all equipped with a means of mounting directly onto a wall or frame. Depending on the size and weight of the box, this will be through internal mounting holes or external mounting brackets. The Annunciator can include a Power Supply, DC/DC Converter or battery backed standby supply.
The standard protection of the box is IP55 but the front of the Annunciator itself is sealed to IP41. Alternative arrangements can be provided to give an IP54 or IP65 protection of the whole assembly.
RTK Instruments is a leading supplier of Alarm Annunciators and systems, Event Recorders and Hazardous Area Notification equipment.
|
|
General Information
High efficiency, high output, red xenon beacon designed for use in applications where visual fire warning is required such as areas where high ambient noise is present or areas where the occupants may be hard of hearing
Anti surge design
Weatherproof deep base version available
Specification
Brand: Menvier
Dimensions (mm): Dia 93 x D72
Weight (KG): 0.28
ANA Number: 5021181014742
Cable Entry: Rear
IP Rating: IP20
Vandal Resistant: Yes
Current Consumption: 90mA
|
|
|
APS Resource is a recognized leader in providing lasting and economical solutions to safeguard loading dock personnel and warehouses against accidents and damage from poor lighting or poor communication between truck driver and dock workers. APS offers dock lights in many sizes and variations to meet your needs. Our line of safety products has been developed to solve multiple safety concerns at your facility.
|
|
General Information
High efficiency, high output, deep base, weatherproof red xenon beacon designed for use in applications where visual fire warning is required such as areas where high ambient noise is present or areas where the occupants may be hard of hearing
Anti surge design
Weatherproof deep base
Choice of cable entry positions
Specification
Brand: Menvier
Dimensions (mm): Dia 93 x D100
Weight (KG): 0.31
ANA Number: 5021181014735
Cable Entry: Rear or side
IP Rating: IP65
Vandal Resistant: Yes
Current Consumption: 90mA
|
|
Flashguard Xenon Beacons
Flashguard weatherproof xenon beacons are ideal visual indicators in a variety of applications.
- Compact, ultra modern sleek appearance
- Ease of installation with first-fix option on standard models
- Weatherproof to IP67
- White, high quality polycarbonate housing
- 12V and 24V DC options in one user-selectable unit.
- Vandal-resistant safety locking mechanism
Overview
Flashguard weatherproof xenon beacons are ideal visual indicators in a variety of applications.
All Flashguard beacons are fitted with a diffuser for greater visibility and spread of light. Two styles are available, Standard and Ultra Low Profile.
|
|
| ... products without technical information |
| |
|
|
Visual alarms, Beacon lights, Stack lights
