Speed sensors

54 companies | 170 products
Filters

Honeywell's Speed and Direction sensors respond to the presence or the interruption of a magnetic field by producing an output proportional to the magnetic field strength. These Hall-effect...

Honeywell features VRS sensors in various categories such as high resolution, output and temperature, power output, harsh setting applications, non-expensive molded versions and major purposes....

{{productDetail[12365]}}
microwave speed and distance sensor - max. 1 200 mm, max. 400 km/h  | CMSTRA121111

Characteristics
Microstar II Sensors are designed for longitudinal vehicle dynamics tests which require a large working range,...

wheel motion sensor - max. 300 kHz | CWPTA411

The Wheel Incremental Transducer WPT is an incremental wheel pulse transducer which is used for the acquisition of wheel rotation...

{{productDetail[5346]}}
laser time-of-flight measurement speed and distance sensor - 0.5 - 3 000 m | LDM301 series

The LDM301 series are opto-electronic laser sensors can determine the acceleration and distance without the need for contact and reflectors. It is integrated with visual time-of-flight (TOF) concept...

laser time-of-flight measurement speed and distance sensor - max. 3 000 m | LDM302 series

Jenoptik LDM302 opto-electronic laser distance meters are used for non-contact measurement of distance and speed, while eliminating the need for reflectors. The devices provide quick and absolute measurements with highest accuracy. The excellent measurement rates facilitate...

{{productDetail[65823]}}
ground fault speed sensor / Hall effect - max. 2.5 mm, ø 12 mm, IP67 - IP68 | IHRM 12 series

The Baumer IHRM 12 sensors are full metal differential hall sensors with a ferromagnetic gear material. The gear...

Hall effect speed sensor - 0.7 - 2.4 mm, ø 12 mm, max. 85 °C | MHRM 12 series

The MHRM series of hall sensors has a maximum operating distance not less than 0.7 mm. Its gears are made of ferromagnetic material and...

ground fault speed sensor / Hall effect - 0.7 - 1.8 mm, ø 18 mm, max. 120 °C | MHRM 18 series

This hall sensor is IP 67 and IP 68 protected, with efficient short circuit tolerance and reverse polarity resistance. As to structural attributes, it is...

ground fault speed sensor / Hall effect - 1 mm, ø 16 mm, max. 120 °C | MTRM 16 series

MTRM 16 are hall sensors that come in full metal version. It has a differential hall sensor and a gear with a ferromagnetic material, with a width...

{{productDetail[9211]}}
rotational speed sensor / magnetic - MM-0002

The Magnetic Transducer MM-0002 is designed to serve as a electromagnetic vibration exciter...

laser speed sensor - CCLD, 3 - 20 mA | MM-0360

The 2981 - CCLD laser tacho probe are designed and develop to be use for contact-free speed measurements ideally in rotating machine parts.

Made...

{{productDetail[17114]}}
laser speed sensor - 1 - 3000 m/min | ASCOspeed 5500

Today, technological regulations, cutting processes and inspection tasks call-for highly accurate information on displacement and speed. Precision...

non-contact speed sensor - ASCOspeed 5500

The ACOspeed 5500, manufactured by Micro-Epsilon, is a non contact speed and length sensor...

{{productDetail[5788]}}
blade counting rotational speed sensor / laser - SLS

Monarch Instrument's Smart Laser Sensor features an integrated battery, and a visible Class 3R laser complete...

inductive speed sensor - GE200 HP

Monarch Instrument presents GE200 HP electromagnetic inductive sensor. It does not require contact. It is used on gasoline engines to take RPM measurements. The sensor can identify high voltage flux field being driven by ignition...

laser speed sensor - ROLS-W, ROLS-P

Monarch Instrument's ROLS-W and ROLS-P are part of the company's line of optical sensors (lasers). These...

{{productDetail[7418]}}
rotational speed sensor / plug-in - max. 20 kHz, max. 284 °F | FM series

The FM Sensor by Rhein Tacho is ideally designed with a robust and sophisticated finish to enhance its...

Hall effect speed sensor - M14, max. 15 kHz, -40 ... 260 °F | Hall HD1 M14

Rhein Tacho's HallD HD1 M14 Differential Hall-Effect Rotational Speed Sensors sport DIN M14 installation...

Hall effect speed sensor - M14, max. 15 kHz, -40 ... 185 °F | Hall LD1 M14

These sensors are engineered with the ability to detect gearwheels using a compact module...

Hall effect speed sensor - M16, max. 15 kHz, -40 ... 260 °F | Hall 1 M16 revA

The Hall 1 M16 revA from Rheintacho are speed sensors integrated with 0 Hz detection...

Hall effect speed sensor - M18, max. 15 kHz, -40 ... 260 °F | SHx10 7 Hall HD1 M18 revA

These sensor data sheets are used for the speed identification of gearwheels, with small module and high resolution....

{{productDetail[40140]}}
Hall effect speed sensor - CHERRY GS1012

CHERRY presents GS1012 flange mount speed sensor. It is a hall effect geartooth speed sensor featuring flange-type plastic enclosure. It is used for motion sensing of ferrous geartooth targets....

combi speed sensor - CHERRY SD1012

The SD1012 model is manufactured by Cherry Switches, and is a geartooth speed and direction sensor, which has a plastic flange mount sensor that is rated with 125 °C. It has a near zero...

rotational speed sensor - CHERRY GS 1001 - 1002

The GS1001 - GS1002 from Cherry - ZF Electronics France, is a rotational speed sensor designed for use in applications where...

combi speed sensor - CHERRY SD 1002

The SD 1002 Series of Geartooth Sensor, manufactured by Cherry Switches, is configured in an adjustable...

{{productDetail[38116]}}
{{productDetail[16540]}}
{{productDetail[20903]}}
rotational speed sensor / inductive - CEH-11

In sync with the machine

These sensors measure the rotational speed of the shaft and provide the reference signal for order-based vibration analyses.

Non-contact...

{{productDetail[4947]}}
Hall effect speed sensor - 20 kHz

Features
• NPN open collector, square-wave output
• Zero speed operation with no signal loss
• Non-contact, large...

Hall effect speed sensor / explosion-proof - 907 XP

907 XP sensors are used in applications requiring hazardous location ratings, or in applications where the sensor may be subject to abuse. It has a 1-inch...

rotational speed sensor - 18 mm | 18 series

Series 18 sensors detect passing magnets of a shaft-mounted pulser disc or wrap and output a voltage pulse frequency directly proportional...

rotational speed sensor / magnetic / with analog output - 4 - 20 mA | ST420

Features
• 2-wire, loop-powered 4-20 mA analog output
• No user calibration: works right out of the box
• Works with shaft-mounted pulser...

rotational speed sensor / magnetic / with analog output - 4 - 20 mA | ST420-DI

Features
• 2-wire, loop-powered 4-20 mA analog output
• No user calibration: works right out of the box
• Works with shaft-mounted pulser targets (disc/wrap)
...

{{productDetail[12082]}}
rotational speed sensor - MP series

MP series magnetic pickups are used with tachometers, speed switches and engine controls to give accurate and reliable...

{{productDetail[12515]}}
rotational speed sensor - MP series

This product of AECO is designed with a cylindrical-threaded metallic sensor M 30 x 1.5 inductive sensing. This features a starting distance between 4 mm...

rotational speed sensor - MP series

The signal reading sensor is ideal in applications like belt transport, mills, grinders, pumps, kneading mixers and other situations where control of revolving or cycling mechanisms...

{{productDetail[27747]}}
rotational speed sensor - 2 mm, 20 kHz, M12 - M18, max. 120 °C | BRS…/… series

The Sensor can be employed for various detection application. It comes in a sturdy design structure. This enables it to be utilized even under difficult operating conditions. An extensive...

rotational speed sensor - 5 mm, 25 kHz, M12 - M18, max. 120 °C | BRUS…/… series

The Rotational Speed Sensor can be used for different detection applications. It comes in a sturdy design structure. This enables it to be utilized even under difficult operating conditions....

rotational speed sensor - 1.5 - 15 mm, M8 - M30, max. 70 °C | DSD…/… series

These sensors allow to control with extremely high precision the rotation of a toothed
wheel or reference marks, switching off the load or giving an alarm in case the
speed goes down the minimum threshold. Thanks to the extremely wide measuring
range they can be even used to control repetitive operations, signalling in case of
unavoided stops. Further delays...

rotational speed sensor - 5 - 15 mm, M18 - M30, max. 70 °C | ASD…/… series

The Speed Sensor can be used for different detection applications. It comes in a sturdy design structure. This enables it to be utilized even under difficult operating conditions. An extensive...

{{productDetail[102913]}}
ground fault speed sensor / Hall effect - 0 - 25 000 pps | A5S series

Differential-Hall-Effect Series A5S...
Your first choice for permanent installation. Detecting small and large steel profiles (gear wheels, slots, holes). Outstanding performance under hard ambient conditions:...

electro-optic speed sensor - max. 20000 pps | A1S series

This Opto-electronic Sensor Series A1S is ready for various applications with smooth or profiled targets: a...

wheel motion sensor - max. 3000 m/mn, IP54 | A1L04B200, A1L05B500

The A1L04B200, manufactured by Braun, is a wheel pulse transmitter which functions through running on a web / on the surface of a cylinder...

{{productDetail[38502]}}
Hall effect speed sensor - 0.4 - 2.5 mm, max. 20 kHz

Hall element switches are especially suitable for the detection of rotation speed and rotation direction of waves by means of gear wheels from...

{{productDetail[19014]}}
rotational speed sensor / compact - x1 - x64, 0 - 40 kHz | ID1101G

Features :

- Differential inductive sensing principle

- Robust against dust, particles,...

{{productDetail[57241]}}
rotational speed sensor / magnetic - 4 - 20 mV /mm/s, 4 Hz - 2 kHz | VEL-G Series

VEL-G generates output by itself and has moving coil velocity of 4mV/mm/s–20mV/mm/s sensitivity. Frequency responses is 4.5Hz-2kHz. It can operate above temperature of 200°C in addition to the dual SS316 case ATEX Ex ia IIC T4.
A signal proportional...

{{productDetail[19052]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation