|
|
Federal Signal offers a line of air horns in a variety of tones and sizes for the industrial marketplace. High, medium and low tones are available which provides a wide range of frequencies and high sound output.
- Available in 120VAC
- Wide variety of tones and sizes
- For indoor/outdoor use
- Type 4X enclosure |
|
| EAO buzzers with up to 95db with continuous or intermittent tone and protection up to IP 65. The buzzer can be modified with bezels for raised or flush mounting. |
|
very loud panel mount piezo buzzer for control professional cabinets etc.
for mounting in M22 and M30,5 bore holes (adapter M30,5)
high protection class IP65
3 well distinguishable sound types selectable volume also in mounted condition infinitely variable (ESG,ESM)
large voltage range
sound type selection via terminal connection
PLC MANUFACTURERS fit (leakage/inrush current) |
|
AE&T offers a choice of two ranges:
- of electronic design Siralert has a sound power of
136 dB with 1m and can diffuse 32 sounds. It is compact and light
(25 kg). It can emit its national of alarm (PPI/POI).
- sirens AT3 and AT4 are with turbine, have a power of 140
to 144 dB with 1m and are omnidirectional. |
|
| The sirens are used as alarm, warning or signalling devices. Thanks to theircharacteristic siren wail, they generate an unmistakable and penetrating alarm. The high volume of the wail and ist allround directivity guarantee, that a suitably large range is attained. The different sizes and versions of the sirens open up a broad range of applications, including signalling for critical situations. Used with the protection cover available as optional extra, the sirens are suitable for outdoor use. Sirens for special voltages and frequencies are available on request. The housings are made of aluminium die cast and coated in light grey with weatherproof paint. The protection cover for the sirens F0 and FI is made of weather-resistant plastic. The protection covers of the other versions are made of sheet steel and coated with weatherproof paint. When using a protection cover, the motor conforms to protection degree IP 44 and the siren housing to IP 22. The sirens are designed for short-time operation S 2 –15 minutes according to VDE 0530, Part 1. For the industrial power supply connection the sirens F0 and F1 are equipped with a industrial cable gland Pg 9 and the types FII – FIIIb with a cable gland Pg 13.5. |
|
LION KING Hand Operated Sirens are designed to provide effective warning in miscellaneous applications where is no psu available.Such as:
Civil defence Mountain rescue Frontier sentry&coast guard Household use Camps Schools
Public buildings Firefighters Mining & construction sites
Due to lightweight the sirens can be easily transported to remote locations and folded up to a small size for ease of handling |
|
The Federal Signal Model A is a general- purpose electro- mechanical siren that produces a distinctive sound and tonal quality for industrial applications. It has a high maximum pitch which provides excellent contrast to industrial ambient noise. Introduced in 1918, the Model A is still used today in many rugged and extreme environments and applications.
- Available with 120VAC/VDC universal motor
- Rugged, durable and corrosion resistant
- Maintenance- free
- Produces 103dBa @ 10' (113dBa @ 1m)
- Type 3R enclosure
- UL and cUL Listed, FM Approved |
|
An all-new 110dB (A) IP65 32-tone electronic sounder with integral pulsed LED beacon
Complements Series E warning industrial beacons
The 32 tones are selected using an internal DIP-switch array
Simple 2-wire connection to energise sounder with second-stage tone available on a third wire
Choice of Red, Black or White polycarbonate horn moulding
|
|
Federal Signal introduces the Model LP4 low profile, electronic piezo sounder. The LP4 is a compact multi- tone sounder ideal for OEM and general alarm applications.
- Operates on 9- 28VDC
- Choice of 28 tones
- Produces 82- 100dBa @ 10' (92- 110dBa @ 1m)
- Compact size - 3" tall x 3.66" wide
- Panel or wall mount
- SUPPLIER OF PLC compatible
- CE Compliant
- Type 4X, IP54 (IP65 with optional deep base) |
|
| Asserta Industrial products provide a range of warning sounders and beacons designed to cope with harsh environments requiring protection to IP66. Design features are incorporated to ensure safer and easier installation, while providing flexibility with fewer product variants. |
|
| The Adaptabel is a high quality solenoid driven bell designed for use in commercial, industrial and transportation applications. Available in 101mm(4"), 152mm(6") and 203mm(8"). The units are weatherproof to IP65 when fitted with the optional back-box. |
|
Federal Signal's Vibratone® heavy duty bell product line utilizes a modular approach to combine gongs and mechanisms allowing for greater flexibility and selection. Three gong sizes are available; the Model A4 is four inches in diameter; the Model A6 is six inches in diameter; and the Model A10 is ten inches in diameter. Each larger gong produces a different tone and a higher dBa output.
- Vibrating mechanism
- Three gong sizes - four, six, or ten- inch
- A range of output available - 98 to 102dBa @ 10 ft. (108 to 112dBa @ 1m)
- Optional weatherproof backbox provides Type 3R enclosure
- UL and cUL Listed, CSA Certified, and FM Approved |
|
* 6" 24V DC bell incorporating a highly efficient rotary centrifugal movement combining high sound output with a low current consumption.
* An Electronic Solenoid Bell that has a combination of a miniature solenoid with an integrated control circuit allowing excellent sound coverage with minimum current consumption and increased reliability. |
|
loud universal and fire alarm bell
for indoor and outdoor use
special version with telephones call current relay
bell made os steel, expoxy powder coated
housing made of aluminum-die cast, epoxy powder coated
typical bell tone- up to approx. 105 dB(A) sound pressure
robust high quality design |
|
Bus scheduler
The G0700 scheduler can centralise several "sub-stations" or several professional buildings via BUS.
These "sub-stations" can be made up of J3000 or J3500 alarm panels. It is therefore possible to maintain local processing and signalling (multitask function and downgrade mode).
The centralisation can be RS485, RS422 (2 wire, 4 wire) type, Modbus RTU or Jbus.
Other links possible: optic fibre, modem, ETHERNET.
Standard centralisation possible 1Km, 620 inputs.
The G0700 carries out the following functions:
- Controls the presence of the modules on the bus
- Sends alarms towards one or more other buildings.
- Professional displays alarms on other carry panels or on PC screen.
- Prints text and date “on the fly”.
- History backup on compact flash card
(option G0200 Professional printer Memory).
- Transmission of information to supervisor or automat.
- Reproduces the alarms transmitted by the supervisor or the automat on the indicator panel.
Applications:
- Industry, Airports, Hospitals, administrative buildings.
|
|
| Large electromechanical sirens are traditional sirens,with the proven technology, superior performance and best quality, are widely used by Chinese Civil Defense, Military, Police and Fire Fighting department, and are also popularly used in many countries in Southeastern Asia, Middle East, Europe, America, Australia and Africa. |
|
Ideal for battery backup applications.
- 32 alarm tones, upto 140dB output.
- 3 stages of alarm.
- Automatic synchronisation.
- Lightweight fibreglass housing.
- Fully programmable 4 stage version available.
- Continuously rated. |
|
The new T130 electronic siren is compact and has an output of 130 dB at 1 m, with a choice of 63 sounds. It is equipped in addition with an audio entry 0 dB for vocal diffusion: Tone or vocal applications
T130 can be installed alone or on a cluster, inside or outside.
It is ideal for use in extremely large installations with high noise levels, for fire emergency signalling, alarm of defection, danger, information, disaster alarm.
It is Modbus® compatible (RS 485; 9600b).
Voltages:
- 230 V AC with a consumption of 0.8 A or 48 VDC with a consumption of 2.5 A.
Weight: 5 kg only for 130 dB generated
It can be failsafe via a safety manufacturers of power supply (in option).
|
|
ex-proof loudspeaker for voice transmission and for warning, calling, indicating
power up to 25 Watt at sound pressure levels of up to 119 dB (A) in 1 m
explosion category II 2G EEx dem IIC T5
for use in explosion endangered areas of zone 1 and 2
protection class IP66
antistatic, UV-resistent synthetic housing
low weight, robust and corrosion proof design
insulation class II - no equipotential bonding required |
|
LK-JDW245B is a double-ended siren for horizontral mounting. Powered by a three phase motor. It is designed for roof or pole mounting. It can be used in:
Civil defence warning systems of major cities all over the world.
Fire or accident warning systems of oil field, gas station, gasoline station, oil storage, mines, power pant, nuclear power plant, chemical plant, chemincal plant, etc. |
|
Cooper Crouse-Hinds has expanded its line of of manual, visual and audible alarms, signals and loudspeakers for Harsh and Hazardous Areas.
Cooper Crouse-Hinds offers a full line of signal and alarm products designed for use in explosive atmospheres as well as harsh industrial and commercial applications. The MEDC Series offers a superb range of products including horns, strobes, speakers, manual alarm call points and other communication products. The products%u2019 IEC rating ensures overseas compatibility, as well as compliance with the %u201CZone%u201D classification of hazardous areas being increasingly employed in North America, particularly in Canada. |
|
|
|
Audible alarms, Sirens, Sounders 
