|
|
Mustang: a concentrate of safety and comfort, ESD
Protective end ABG (200 joules IN ISO 20345-1), professional fitting ergonomic, anatomical arch of the foot and insert anti-perforation (IN ISO 20344-1) for safety, lining Cambrelle ® for comfort.
Very modern design and sporting look
Non-skid sole SPORTY®, with the profile curves Parabolic® (exclusive patent of Lemaitre Sécurité). The concave structure of this sole supports an excellent adherence on all the industrial grounds. Moreover, during walk, after the phase of crushing, energy is restored thus causing a dynamic effect; an effect arises anti-tiredness.
Model MUSTANG is ESD (ElectroStatic Discharge), i.e. it protects from the electrostatic discharges. It is consequently particularly recommended, inter alia, in auto industry (cabins of painting), electronics, etc...
Aired model, out of leather flower black, very comfortable and which lets well breathe the foot.
There exist other models for cleaning rooms, etc...
|
|
IMPERMEABILITY: The professional boots are fully moulded for a perfect bond between upper and sole.
ATS (patented) SOLE:
ATS = Adhesion on all surfaces
Good adhesion on all types of surfaces (loose ground, slippery and steeply sloping floors) Adhesion factor greater than 0.15 (in compliance with NFS 73012).
U-shaped anti-fatigue heel. High shock absorption: over 20 joules. Protects the spine.
Shaped at toe and heel with special tread for sloping terrain.
Optimum cleat spacing to avoid mud and sludge build-up.
Arched non-slip grooves for ladder work.
LINING: Non-woven polyester:
rot-proof and antimycotic.
industrial absorbent and hypoallergenic.
highly resistant to wear.
SAFETY FEATURES: Steel toe-cap and midsole conform to EN344 standard.
CHEMOSIL* coating ensures permanent, perfect interpenetration of the elastomers and the safety elements. |
|
Behind every man is a good industrial shoe, and with the new Aristocrat, you're the man.
Send a message to colleagues and superiors that demands respect with its sleek contouring enhanced with our SFC III™ Slip-Resistant Outsole.
Buffer the stress of hectic work weeks with cushioned insoles, and lessen the impact of long days with outsoles designed to absorb shock.
Premium full grain leather makes this the savvy choice for any decision-maker. Get the respect you deserve with the Aristocrat, a superior shoe for every man. |
|
- Excellent resistance to corrosive chemicals, particularly
to concentrated and hot acids, fuels and solvents. Heat resistant.
- ATS sole (adhesion on all surfaces).
- Excellent mechanical resistance.
- Recommended for use with protective clothing manufacturers in
hostile environments. |
|
BOTSEC. Viscose lined PVC protection boot, steel midsole and toecap. Green colour. Advantages : Quality of an european made product. Softeness of the PVC. Comfort and resistance. Resistant sole against hydrocarbons.
Sizes 39 to 45. CE EN345 S5. |
|
ABSOLUTE SAFETY BOOT MANUFACTURER
EN 345 - S5
HERCULES
Sole PVC
Toecap Steel
Midsole Steel
Size Range 38-47
Category S5
Lining
|
|
- For work with currents up to 20.000 V (between phases).
- Complies with EDF technical specification HTA70B.
- ATS sole (adhesion on all surfaces). |
|
CityZen range
Sirius S3Ci: « Derby » design with black full-grain leather, supple and resistant. Leather lining. AMS Concept (non-magnetic system)
AMS Concept (non-magnetic system) : fully non-metallic hence non-magnetic, the styles benefiting from this technology have multiple advantages :
>> Impervious to thermal variations and transfers,
>> Undetectable by security industrial scanners,
>> Exceptionnally comfortable,
>> Lightweight, without any concession to safety.
Lightweight and very resistant protective toe cap in polycarbonate (200 joules - EN ISO 20345).
Anti-perforation insert in para-aramide material, lightweight, flexible, unalterable, resistant to perforation over 100% of the surface of the sole (EN ISO 20345).
Recommendations : for all personnels in civilian attire or in uniform, from offices to workshops, in controlled areas, in airports, in warehouses, etc. |
|
ABSOLUTE INDUSTRIAL SAFETY SHOE
EN 345 - S3
X1110
Sole Dual density PU
Toecap Steel
Midsole Steel
Size Range 38-47
Category S3
Lining Cambrella
Insole Premoulded
|
|
What is ESD?
ESD (= electrostatic discharge) - electrically sensitive areas EGB ( = electrostatically endangered construction elements) anti-static. We are all familiar with ESD. It is a spark which jumps from one charged surface to another conductive surface. Whenever we shake another person's hand, this type of discharge occurs. |
|
- Fireproofed nitrile rubber professional boot, totally watertight in intensive use.
- ATS sole (adhesion on all surfaces).
- Excellent resistance to heat, heat flow and flames.
- Good resistance to contact with commonly used chemicals.
- Antistatic sole.
- Insulating boot
(for use with low tension current up to 500V). |
|
Salisbury has the exclusive Dielectric ANSI Z41 Footwear and ASTM F1117 Dielectric Footwear.
All Dielectric ANSI Z41 Footwear:
- 100% Waterproof
- Super Dielectric tested to 20,000 volts
- Dielectric tested to 14,000 volts
- Premium grade ozone resistant rubber.
- Nonmetallic buckle hardware
All ASTM F1117 Dielectric Footwear:
- All overshoes conform with ASTM F1117 "Standard Specification for Dielectric Overshoe Footwear" and are tested to ASTM F1116 @ 20kV.
- Premium grade ozone resistant rubber.
- Flexible hand-layered construction-100% waterproof
- Nonskid Bar Tread outsole
- Nonmetallic buckle hardware
- Designed to provide utility workers and contractors additional protection from electrical hazards.
- Made in U.S.A.
- Nonmetallic buckle hardware |
|
ABSOLUTE MANUFACTURER OF SAFETY SHOE
EN 345 - S1P
BESTSUN
Sole Dual density PU
Toecap Steel
Midsole Steel
Size Range 38-47
Category S1P
Lining Cambrella
Insole Premoulded
|
|
ABSOLUTE PROTECTION SHOE
EN 345 - S3
X0600
Sole Dual density PU
Toecap Steel
Midsole Steel
Size Range 36-47
Category S3
Lining Cambrella
Insole Premoulded
|
|
ABSOLUTE PROTECTIVE BOOT
EN 345 - S5
ARTEMIS
Sole PVC
Toecap Steel
Midsole Steel
Size Range 38-47
Category S5
|
|
| PROFESSIONAL SHOES FOR CREWS® has redesigned the Guardian to be even more durable and comfortable. The Guardian is the only chemical, oil and grease-resistant professional boot built with technologically superior slip-resistance and anti-bacterial protection. And for added comfort, this rubber boot features our anti-fatigue cushioned insole |
|
Lemaitre Sécurité’s SPORTY® range: safety, comfort and looks
ABG toe cap, anatomical arch support, sole in nonslip Gummilem, highly abrasion resistant leg reinforcement, Cambrelle antiperspiration lining….. are the key points to remind that the SPORTY® range of Lemaitre Sécurité is one of the safest on the market for foot protection, in spite of its innovative looks similar to a casual professional shoe.
SPORTY® benefits also from an exclusive Lemaitre Sécurité patent: the Parabolic® sole featuring a curved cross-section which offers optimal grip and comfort for the wearer. The injected sole insures good ventilation of the foot and optimum perspiration management.
The SPORTY range finally demonstrates that safety footwear no longer needs to be hidden away! By combining its creative talents with state-of-the-art technology, Lemaitre Sécurité has product a protector shoe that looks great, is comfortable and is as light as a casual shoe.
|
|
| Lemaitre Safety produces and sells manufacturers of safety shoes under the Lemaitre brand. As a specialist, Lemaitre Safety controls all the stages of manufacturing, including business intelligence, creation, development and industrialization. With more than 2.500.000 pairs per year, Lemaitre Safety is one of the most sold brand of safety professional shoes in the world : 55% of the turnover coming from exports and presence in 80 countries |
|
ANATOMIC INDUSTRIAL SAFETY SHOE
EN 345 - S1P
TOPRUNNER
Sole Dual density PU
Toecap Steel
Midsole Steel
Size Range 36-47
Category S1P
Lining Cambrella
Insole Premoulded
|
|
ABSOLUTE PROTECTION SHOE
EN 345 - S1P
TOPJOGGER
Sole Dual density PU
Toecap Steel
Midsole Steel
Size Range 36-47
Category S1P
Lining Cambrella
Insole Premoulded
|
|
- Moulded waterproof ankle professional boot (stitched tongue gusset
with lacing through waterproof rings ).
- Edged collar .
- Same chemical and mechanical resistance as the
SECUREX range from which it was developed.
- Same sole and lining.
- Average height: 120 mm. |
|
ADVANCED AGRO SAFETY SHOE
EN 345 - S2
X0500
Sole Dual density PU
Toecap Steel
Midsole Steel
Size Range 36-47
Category S2
Lining Cambrella
Insole Premo
|
|
ABSOLUTE PROTECTIVE SHOE
EN 345 - S3
POWER1
Sole Dual density PU
Toecap Steel
Midsole Steel
Size Range 38-47
Category S3
Lining Cambrella
Insole Premoulded
|
|
ABSOLUTE PROTECTIVE SHOE
EN 345 - S1P
X2020P
Sole Dual density PU
Toecap Steel
Midsole Steel
Size Range 38-47
Category S1P
Lining Cambrella
Insole Premoulded
|
|
ABSOLUTE INDUSTRIAL SAFETY SHOE
EN 345 - S3
BESTRUN
Sole Dual density PU
Toecap Steel
Midsole Steel
Size Range 38-47
Category S3
Lining Cambrella
Insole Premoulded
|
|
|
|
Safety shoes, Safety boots
