|
|
The rules of beaconing of the obstacles to the aerial navigation are defined by the International Civil Aviation Organization (ICAO) (Appendix 14 Volume 1, 3rd edition July 1999).
The obstacles defined by the ICAO include/understand the following structures:
- smokestacks
- pylons (Telecom, TV, Radiocom...)
- lines High voltage (electric distribution)
- bridges
- buildings great height
- powerplants
- cranes
The obstruction lights low intensity with LED BA15 fulfill the requirements of the ICAO with a luminosity higher than 10 Cd. The use of the LED as source of light offers exceptional advantages in term of longevity (lifespan of 100.000 H), of robustness and minimal electricity consumption (3W).
|
|
| The LED501/500 beacon conforms to ICAO requirements for aviation obstruction marking. This product is of robust, corrosion-free construction and has a rubber housing which offers vibration protection. Ideal for most low intensity applications. Various mounting bracket options. Available in red only. |
|
ActiveLine is designed to indicate various operating states of machines and systems. The possible signalling colours green, yellow, red, blue and white are all shown in one single light element. Each colour can be preset to continuous light, blink light or flash light. The light is generated by use of lightemitting diodes. The model with sounder can also generate a penetrating signalling tone, with four adjustable sound levels.
The plastic housing, the stable foot and the sounder housing are made of impact-resistant thermoplastic. The cap consists of im-pact-resistant polycarbonate, and the stand-tube is made of aluminium. |
|
The new Moflash "Spectrum 600" LED Beacon offers the option of 3 colours in one enclosure (Red, Amber and Green). The Spectrum 600 also incorporates a Piezo Buzzer offering an additional audible signal option. The unit offers a total of 28 signal combinations for PLC controlled operation. An optional interface unit is available for non-PLC operation and offers 8 pre-set signals.
|
|
Bright idea for control signals and productivity.
* Size: 82mm diameter.
* Lenses are made of heat and shock resistant polycarbonate resin.
* Colors available are Red, Yellow, Green, and Blue.
* Integral rotating parabolic reflector makes the light visible from a distance.
* Uses incandescent automobile bulb for longer life.
* Rain and dust resistant (IP-23)
* Rubber gasket is available for wash-down applications. (Meets IP-55 requirement for RU models only)
* RUP model is furnished with pole & bracket.
* Rotates 120 times per minute.
* Optional custom poles up to 1000mm long are available.
* CE compliant (12V and 24V versions). |
|
WE , WEP Continuous Light
WE-FB , WEP-FB Flashing Light w/ Audible Alarm
* Ultra-slim profile (37.5mm) unit is designed to smoothly integrate with your equipment.
* All new light design uses "Side Projection" (Pat. Pend.) LED's and "Super Clear" lenses.
* Available in two finishes, cream (WEP) and chrome-plated (WE).
* IP-65 rating (IP-54 for FB version) for washdown and cleanroom environments.
* FB version features a flashing circuit and two-tone integral audible alarm (90 dB/m).
* Open-collector compatibility allows direct drive via a PLC.
* Available in 3, 4 or 5-tier styles in AC/DC24V. |
|
On each TOWER SECTOR base
(TWS B.C.) 5 modules can
be assembled. It is possible to
install up to 10 modules or to
match TOWER SECTOR with a
beacon from the BABYROT,
BABYLAMP, BABYFLASH range
using the base with 1/2” NPT
double thread for wall mounting
(TWS BP 2). |
|
Federal Signal's Litestak® status indicator is a column of signal lights that indicate the status of a process or machine. The units may include up to five Light Modules (Model LSL) available in amber, blue, clear, green and red; or four light modules plus an optional Sound Module (Models LSS or LSH) to create a dual purpose audible/visual status indicator. The Sound Module always occupies the top position of a Litestak unit.
- Available in 24VDC, 120VAC and 240VAC
- Five lens colors
- Surface mount and integrated 3/4- inch pipe mount
- Indoor use only
- Type 1 enclosure
- Optional sounder available
- UL and cUL Listed, CSA Certified |
|
PATLITE's LCE Series offers a full range of LED signal towers for every need. They're versatile and energy efficient. NEMA Rated: NEMA Type 4, 4x, 13 for Direct Mount versions.
* Size: 40mm diameter.
* Available in 24V AC/DC and "Free-Voltage" 90-250V AC versions.
* FB types include two selectable, single-tone intermittent alarms with adjustable volume to 85dB (at 1m).
* Colors available: red, yellow, green, blue and clear.
* LED modules are interchangeable and stackable after purchase (up to 5 modules).
* Units are shipped completely pre-wired and pre-assembled.
* Pole mount versions include 300mm steel pole and mounting bracket (SZ-012) with nuts and washers.
* New Independent Control of individual Light Modules.
* NPN or PNP open collector compatible (24V type), and NPN open collector compatible (90-250V type).
* All models are CE compliant.
* LCE & FB/FBW types: Meet IP-54
LCE-W: Meets IP-65.
* NEMA Rated: NEMA Type 4, 4X, 13.
* Optional mounting brackets available. |
|
The LUXOR range is supplied in pre-assembled configurations and is available in 4 different dimensions so
as to be adaptable for different size environments, areas and machines. Various versions are also available:
single, in line, columns or elements placed opposite each other offering many installation opportunities.
The luminous versions available, in 6 different colours, are continuous, flashing, xenon, rotating and alternating.
They can be combined with an acoustic signal.
The LUXOR system offers the designer or installer of the equipment the possibility to extend a single element
version by adding more elements as required and substituting the existing PCB with a PCB of more
elements.
The aim of the LUXOR range is “total safety”, the same as TWS. On opening the device it is impossible to
touch “live” parts as the power supply is cut off (with the exception of the rotating beacon version) assuring
maximum safety.
Three different types of light sources are available using the following bulbs: filament, xenon discharge tube
and LED. |
|
Bright flashing lights and loud alarms capture attention in busy industrial environments. Mounted on a control panel or machine, GE Light Tower signals a potential problem or required action before.
GE Light Tower offers a wide variety of visual options, AC and DC versions, global approvals (UL, CSA, CE) and flexible mounting options, for effective use in almost every situation. Suitable for NEMA Type 1, 3R, and 12 applications, Light Towers go where you need them - indoors or out, in commercial or harsh industrial environments.
Features and Benefits
Three different diameters - 45mm, 56mm, 85mm.
Steady lights can easily be change to flashing by adjusting a simple jumper (56mm and 85mm only).
New lens design produces 360B of bright, shadow-free, colored light for maximum visibility from a distance.
|
|
The Federal Signal Litestak® Sound Module is a microprocessor-based audible signaling device. The model LSS can be used as a stand-alone audible device or combined with the Federal Signal Litestak light modules to create an audible/visual signal.
- Available in 24VDC and 120VAC
- Modular unit fits on top of any Litestak® configuration
- Select one of 18 tones
- Capable of outputs between 59- 69dB @ 10' (69- 79dB @ 1m)
- Indoor use only
- Type 1 enclosure
- UL Listed and CSA Certified |
|
Signal lamps with integral filament lamps/LEDs or with lamp sockets
Signal lamps with integral LED, mounting hole diameter 5 - 10 mm
Signal lamps with integral filament/neon lamp, mount.hole.diameter 5 - 14 mm
Signal lamps with lamp sockets, mounting hole diameter 9 - 30 mm
Panel mounting sockets, tubular lamp holders |
|
Large LED Tower
LGE
* Size: 100mm diameter.
* Large diameter signal tower is visible from great distances. (Lens dimension is 100mm x 50mm)
* Units are stackable up to 5 lights (purchase of new shaft is required).
* Incandescent and L.E.D. models available.
* Available colors are Red, Yellow, Green, Blue, and Clear. (Blue/Clear LED at a premium)
* Easy to assemble in the field.
* Lenses are made of heat and shock resistant polycarbonate resin.
* Color configuration can be easily changed.
* Available with flashing and an audible alarm of 85dB/m.
* Meets IP-54 (Sealant required for wire entry hole and mounting bracket).
* NPN or PNP open collector transistor compatible. (24V only)
* Assembly Required |
|
The RTK UC625 Alarm System, developed from the field proven P625 range of alarm annunciators, offers the latest in ASIC technology packed into an compact design for applications where panel space is at a premium.
However simple or complex your alarm requirement, the UC625 with compact packaging, ASIC Technology and "no master module" philosophy, will give the most cost-effective solution.
Programmable alarm sequence, signal duplicating relays, dual horn relays, LED display, proven ASIC technology and dual redundant universal power inputs make it ideal for all industry sectors.
|
|
A16B Alarm Annunciator(604 600)
• Programmable with PC or other control devices
• Easy transitions between hardware / software configurations
• 3 port 2.5kVAC isolation
• High efficiency indicator LED’s in front panel
• Low power consumption
• DIN 19235 standard compatible signal functioning
• Removable signal labels
• Wide operation temperature range
The A16B is programmable industrial 16 channel alarm annunciator with different signalization options and compatible with DIN19235 standards. A16B alarm inputs interrogated with 24/110 AC/DC voltage. High isolation is provided between input, output and power supply circuits for maximum safety. A16B is DIP switch configurable and also programmable via Windows based software which allows easy and flexible configuration of input and output characteristics. |
|
Federal Signal Model 371 incandescent warning lights have a powerful sealed beam lamp that rotates 360º within a glass or polycarbonate dome. Power is delivered to the Commander's rotating lamp by a unique collector ring. The lamp itself is mounted in a pivoting yoke. This allows the lamp beam angle to be adjusted through 90 degrees from horizontal to vertical. Changing the beam angle allows the user to create unique light patterns and/or direct the light for better visibility.
- Available in 120VAC
- Five dome colors
- Pivoting lamp yoke
- Surface mount and integrated 1- inch pipe mount
- Type 4X, IP66 enclosure
- UL and cUL Listed, CSA Certified |
|
| Hazardous areas often require the use of optical signals for warning or information purposes. The EExII rotating beacon dSLD 21 offers both of these signalling features. It is designed for continuous operation. If the supply voltage is turned on, the rotating beacon dSLD 21 is activated.The device is available in several versions with various levels of operating voltage and and various signallingcolours. The stable, glass-fibre reinforced polyester (GRP) housing is made to the IP66 degree of protection and may be used indoors or outdoors. The II 2 G EEx de IIC T6 protection class enables the unlimited use of the signalling device in all hazardous areas, zones 1 and 2. The flameproof enclosure and the "increased safety" type of protection of the terminal room guarantee hazardous area protection. The upper part of the flameproof enclosure, which contains the electronic and the mounted halogen lamp, consists of a transparent Makroloncap. An inner cap lends colour to the light. The housing consists completely of GRP. Thus the device is protected against corrosion, and fulfills the requirements of contact safety class II. An equipotentiel bonding is not required. All outer fastening parts are manufactured in non corrosive materials. |
|
| The Moflash range of rotating beacons incorporates a parabolic reflector which revolves around a continuously illuminated lamp - thus giving the rotating effect. This gives a powerful beam of light travelling through 360 degrees. Available in a wide range of voltage options. Diode Polarised and Magnetic Base versions also available. |
|
Ideal for extreme temperatures or chemically exposed areas.
KP Non-corrosive - Fade resistant
* Size: 162mm diameter.
* Acrylic dome is available in Red, Yellow, Green, and Blue.
* Anti-UV coated body protects from fading for long term use.
* Stainless steel bolts and nuts protect from rusting.
* Motor operates at extreme low temperatures of -30°C
* Suitable for chemically exposed areas.
* Spare bulb included.
* Rain and dust resistant (IP-23).
* CE compliant (24V version). |
|
Visual warning signals establish a code communication
through two variables, i.e. different degrees of brightness
and the use of different colours. Through these features
the operator receives information. |
|
|
|
Visual alarms, Beacon lights, Stack lights
