|
|
AE&T has developed a system of flashing lights specially designed for illuminations. The LED flashing lights are addressable and programmable to enable users to create their required lighting effects.
The system is connected via a BUS system :
- a string of a maximum of 60 flashing lights
- 2 branches per string, 5A maximum per branch
- 200 industrial control boxes (concentrators) on a single bus
- Up to 12.000 lights
Light characteristics :
- LED technology : service life of 30 million flashes
- lighting power : variable from 0.1 to 4 Joules. 2 Flashes/sec maximum
- 48 V Dc power supply suppliers (40-60 VDC) 10 VA maximum
- low consumption : from 25 mA to 100 mA
- degree of protection : IP 55
- thermal dissipation : 10 W
- grey polycarbonate box and clear dome
- leds available in white, green, red, orange. Different coloured lights can be combined to give different colour effects
|
|
The requirements of the ICAO (International Civil Aviation Organisation) prescribe that aviation obstructions be clearly marked with corresponding certified obstruction lights. The obstruction lights Skyline Beta correspond to these requirements according to ICAO Annex 14, Chapter 6, Table 6-3. Skyline Beta is designed on the basis of LED, thus enabling almost maintenancefree operation, and achieves an extremely long lifetime.
|
|
Federal Signal Obstruction Lights are designed to mark tall structures that present hazards to air navigation. When installed in accordance with FAA AC 70/7460- 1, these lights increase the conspicuity of obstructions for pilots flying at night.
- Available in 120VAC
- Single lamp
- 116 watt lamp
- 8,000 hour lamp life
- 1- inch pipe mount
- FAA L- 810 Certified, ETL tested |
|
Format DIN 144x144.
Automat for centralising technical faults with 12 high luminosity leds, PC parameter settings and text display.
A "top of the range" product with all the functions of the J3000 with all the flexibility of PC programming.
Many additional functions.
Application: All industries including "high risk". This product is preferable in situations requiring sophisticated or different, channel by channel settings.
Simple, user-friendly PC professional software supplied. Bus RS422/485 Modbus/Jbus.
Selections by input channels
Output scheduler
Scheduling and processing of alarms and indicators
Text display with History and settings menu
|
|
The Series 725 Alarm Annunciator provides the ideal solution to all your alarm system requirements. This innovative and unique design gives exceptional flexibility, reliability and programmability.
- Only 145mm deep
- Fully programmable with power applied and without having to remove lightboxes, backplanes or alarm cards
- Proven, ASIC-based technology: fewer components means higher reliability
- Ultra bright LED's available in a range of six colours
- Surpasses the EMC and LVD directives.
With a range of three window sizes, six colours and a choice of bulbs or ultra-bright LED illumination, a format and size will be available to match your exact requirements.
Each individual alarm way is fully programmable from the front, using the integral programming module. This allows for many different features giving thousands of possible combinations.
Numerous relay outputs are included as standard to connect to external equipment and individual repeat relays can be supplied as an option. The ASIC technology utilised in this design has a proven track record in a wide range of industries around the world.
|
|
LN1000 Intrinsically Industrial safe Annunciator provides a unique solution for problems with hazardous area alarm indication. The annunciator provides a visual display of the alarm status including 'first-up' information and can be mounted in the hazardous area for the benefit of operators working in any Zone.
The lightweight stainless steel construction gives a compact and simple to install modular unit which can easily be expanded by the addition of extra alarm cards.
Maintenance can be carried out live without the necessity of 'gas checks' or prior shutdown. Unlike flameproof, purged and type 'N' systems, installation is simple and relatively low cost.
Power to the annunciator is supplied from the safe area through a single Intrinsically Safe interface for up to 32 channels.
With the addition of a number of ancillary devices a complete intrinsically safe alarm and control package can be provided |
|
INDUSTRIAL PANEL PC
Centralization of technical défault.
PANEL PC is a manager of technical alarm by integral BUS of the functionalities of operator assistance, of history with saving on card Compact Flash.
PANEL PC allows to manage 64 off-set modules of 12 alarms or the modules of inputs/outputs.
These modules can consist of panels of alarms J3000 or J3500. This makes it possible to preserve a treatment and a local indication (multi-task operation and degraded mode).
PANEL PC provides the following functions:
- Posting of alarms with payment to the screen.
- Operator Assistance or instruction for each way allowing to indicate to the operator the procedure according to alarm present.
- Visualization of the histories of the period.
- Visualisation of the one recorded period histories (10 000 possible pages).
- Impression with the wire of water with time-stamping.
- Carryforward of alarms at distances towards one or more subscribers by BUS (e.g.: the guard, engineering department, the control room).
- Possible remotely controllable outputs.
Use :
- Industry, Airport, Hospitals, Buildings. |
|
The 9000TS is built on a rugged hardware platform suitable for the most severe of industrial environments this unit will provide true time-stamping of event occurence to a resolution of 1ms. Using the synchronisation input this can also be related to real time.
Combined with the integrated alarm annunciator features it is possible to build a system that will capture, record and display events and alarms both for immediate action on the plant and for later analysis to find the prime cause of the failure.
The system is sold with various different display and output options to suit the particular system and application.
|
|
The rules of beaconing of the obstacles to the aerial navigation are defined by the International Civil Aviation Organization (ICAO) (Appendix 14 Volume 1, 3rd edition July 1999).
The obstacles defined by the ICAO include/understand the following structures:
- smokestacks
- pylons (Telecom, TV, Radiocom...)
- lines High voltage (electric distribution)
- bridges
- professional buildings great height
- powerplants
- cranes
The ICAO recommends the average use of fires intensity for the structures exceeding 45 m height. For structures exceeding the 150 m height, the average use of fires intensity will have to be supplemented by a marking (red/white).
Fires average intensity BA200 and BA202 only fulfill the requirements of the ICAO for marked out structures of night (BA200 with an luminous intensity higher than 2.000 Cd) and for the marked out structures day and night (BA202 with an luminous intensity higher than 20.000 Cd of day and 2.000 Cd of night). |
|
The 725B Combined Annunciator and Event Industrial recorder brings you the most advanced alarm professional monitoring system available today, offering you the best combination of reliability, flexibility and usability plus a low cost of ownership.
The 725B Annunciator uses CANBUS® communication technology coupled with RTK Instruments%u2019 unique multi-redundant (no single point of system failure) design. The 725B can be supplied as a stand alone Annunciator or with an integrated 1ms Event Recorder, allowing the user to analyse the exact sequence of events following a plant breakdown.
All alarm windows are illuminated by high reliability, ultra-bright white LEDs offering a maintenance-free solution. To reduce installation time and costs, the 725B can be supplied with integral, universal Switched mode power supplies to connect directly to 85-264VAC or 88-360VDC.
The modular construction of the 725B Alarm Annunciator allows units to be assembled in almost any size and shape from one to 256 channels in a single housing with a choice of window sizes and colours.
Each alarm channel is fully programmable using the RTK supplied configuration utility and a standard USB programming port to connect directly to a PC or laptop. |
|
The PEX7250 Explosion Proof Alarm Annunciator offers a vast range of features and benefits normally reserved for use in safe area annunciators only. The heart of the system is our field proven Series 725 Alarm Annunciator which is available in 3 individual window sizes 30mm x 30mm, 30mm x 60mm or 60mm x 60mm. Reliability of the system is vastly improved over conventional systems with the use of ASIC's (Application Specific Integrated Circuits) for each pair of alarms, removing any reliance on common industrial control cards. The standard enclosure is copper free cast alloy, finished in a light grey two-part epoxy paint, making it ideal for offshore applications.
Systems are available in a range of formats and sizes and are certified for use in Zone 1 hazardous areas. All systems are automatically covered by our standard 5 Year Warranty. |
|
Very compact Professional strobe light for different applications
very compact design
casing: aluminium, cap: hardened borosilicate glass
protection basket made of V 4A steel
very light strobe: approx. 1,6 kg
EEx de II CT 6
protection: IP67/IEC 529
temperature range: -20°C to +40°C
|
|
In potential explosive atmospheres it is often necessary to use optical signals for warning, indicating and signalling. The Ex II Professional strobe light BZ2 offers this option. The item is made for continuous operation. The protection degree is IP 66. The housing is made of impact resistant thermoplast. The cap is made of Makrolon. The strobe energy is 5 Joule.
|
|
Hazardous areas often require the use of optical signals for warning or information purposes. The EExII professional strobe light dSLB21 offers both of these signalling features. It is designed for continuous operation. If the supply voltage is turned on, the Strobe Light dSLB21 is activated. The device is available in several versions with various levels of operating voltage and flash energy and various signalling colours. The stable, glass-fibre reinforced polyester (GRP) housing is made to the IP66 degree of protection and may be used indoors or outdoors. The II 2 G EEx de IIC T6 protection class enables the unlimited use of the signalling device in all hazardous areas, zones 1 and 2. The flameproof enclosure and the "increased safety" type of protection of the terminal room guarantee hazardous area protection. The upper part of the flameproof enclosure, which contains the flash electronic and the mounted flash tube, consists of a transparent Makrolon-cap. An inner cap lends colour to the light. The housing consists completely of GRP. Thus the device is protected against corrosion, and fulfills the requirements of contact safety class II. An equipotentiel bonding is not required. All outer fastening parts are manufactured
in noncorrosive materials. |
|
The DA135 LED Beacon provides an ultra-bright LED flash to warn of abnormal events in any hazardous area.
It is ATEX certified to Ex II 1G for use in any zone. The ruggedised and encapsulated enclosure is sealed to IP65 to ensure reliable operation in harsh environments and is backed up with our 5 year warranty.
Available in five equally bright colours including white and blue, the DA135 Beacon is often used as a simple flashing warning signal but there are also additional unique display features that allow the user to show additional information. These include single, double and triple flash selection and a dual colour version.
Combined with our Intrinsically Safe Sounder and a pushbutton the unit can be configured as a full single point alarm annunciator.
|
|
robust visual signalling device with bright optics
loud signal horn for warning, announcing, calling
for use in gas-explosion endangered areas zone 1 + 2
II 2G EEx de IIC T6
protection class IP66
full synthetic housing made of GRP - low weight, robust and corrosion proof design
all external parts for mounting of device made of corrosion free materials
DC version with electronic interruptor, long service life and safety to work
optional models with telephone call current relay (dHHR) |
|
Explosionproof beacon lamps suitable for use in Zone 1 and Zone 2 hazardous areas.
Large-format 610EX beacon features white EPC coated LM25 aluminium and wire guard, whilst the DEX housing features hot dipped galvanised cast iron with white EPC coating. A steel wire guard is optional for the DEX housing. Alternative EPC coating colours can be accommodated to suit specific applications.
The full range of beacon interiors is available from simple static filament through to low-current LED and high-energy xenon strobe models.
Two threaded M20 entries are provided as standard; others can be supplied to special order.
|
|
- ATEX GOST-R IECEx approved
- All units are available in EEx d and EEx de versions.
- 110dB and 117dB Alarm Sounders.
- 5, 10 & 15 Joule Xenon Industrial beacons
- High output L.E.D beacons and status lamps
-15 & 25W Loudspeakers (100v, 70v line & 16R, 8R low impedance versions).
- 'Appello' Speech and Tone voice annunciaton models.
- Suitable for Zone 1, 2, 21 & 22.
|
|
versatile applicable visual signalling device with powerful strobe/xenn tube - 5 or 15 J
explosion category II 2 G EEx de IIC T6
for use in explosion endangered areas of zone 1 and 2
protection class IP 67
aluminium housing dark grey RAL 7011 lacquered or powder coated
compact dimensions - can be built in (only lens visible)
temperature monitoring - automatic reduction of strobe energy/- frequency as required
synthetic housing made of glass-fibre reinforced polyester (GRP)
low weight - approx. 1,6 kg
hardened glass lens with/without protection cage made of stainless steel (depending on model)
for continuous operation
5 lens available
typical application in chemical/petrochemical industry, refineries, ship- and aircraft building, ammunition depots, fork lift trucks etc. |
|
robust visual signalling device with powerful halogene industrial bulb and triple lens optical system
for use in gas-explosion endangered areas zone 1 + 2
explosion category II 2G EEx de IIC T6
protection class IP66
synthetic housing made of glass-fibre reinforced polyester (GRP)
low weight, robust and corrosion proof design
modular design:*flameproof chamber "d"; *e-chamber(increased safety "e")
optional models with telephone call current relay (dHHR)
fpr continuous operation
4 inner lens colours available |
|
Explosion Proof Alarm Annunciator from RTK Instruments
RTK Instruments’ PEX7250 Explosion Proof Alarm Annunciator, suitable for use in Zone 1 and Zone 2 hazardous areas, offers a vast range of features and benefits normally reserved for use in safe area annunciators only.
The heart of the system is RTK Instruments’ field-proven Series 725 Alarm Annunciator, which uses multi-redundant ASIC technology to greatly improve reliability compared with conventional systems. This high level of reliability is backed up by RTK Instruments’ 5 year warranty.
The PEX7250 Alarm Annunciator is available in a range of sizes and shapes from one to 56 points in a single enclosure, with a choice of three window sizes. Illumination is using high reliability, ultra-bright LEDs.
The standard enclosure is copper-free cast alloy and finished in a light grey two-part epoxy paint, making it ideal for offshore applications. A stainless steel enclosure is available as an option.
RTK Instruments is a leading global supplier of safe and hazardous area alarm, display and interface products and can provide specific application advice, as well as product recommendations and installation advice.
|
|
New DA135 Intrinsically Safe LED Beacon from RTK Instruments
RTK Instruments has developed a new range of LED Beacons, which provide powerful visual alarm signals in both hazardous and safe areas. The DA135 is ATEX certified for use in Zone 0, 1 or 2 hazardous areas and is available in five super-bright colours. The ruggedised and encapsulated enclosure makes this an ideal choice for the harsh environments found offshore and in the chemical and petrochemical industry.
The standard unit has a unique method of allowing the user to change the flash rate between single, double or triple flash by triggering control inputs. Customers can then use the same unit to indicate different site problems. A dual colour version is also available where each colour can be triggered separately from the control inputs
The DA135 can be operated alone or in conjunction with an intrinsically safe Sounder and Pushbutton to create a fully featured single point Alarm Annunciator.
RTK Instruments is a leading supplier of safe and hazardous area alarm, display and interface products and can provide specific application advice, as well as product recommendations and installation assistance.
|
|
The Pulsed Filament Beacon Lamp derives its warning signal from repetitively flashing a filament lamp. This is the only type of flashing beacon permitted to be used on ground vehicles at airports.
Pulsed Flashing potential is now enhanced by our latest developments of LED beacon lamps giving exceptional operation with no lamp change required, low current drain and in the case of the MFE/LED models, the unique feature of seven signals in one device, all digitally controlled - Static, Pulsed (x3 speeds), Wig-wag (x2 styles) and Chasing, allowing one beacon to replace several signalling devices, such as expensive stacking industrial beacons.
Solid-state circuit for long operational life.
All filament lamp units incorporate Slave terminals for synchronised flashing of additional units.
All filament lamp units may be simply switched from flashing to steady-on via simple wire link/external switch.
New Heavy Duty IP68 Series G Models |
|
Rotating and Flashing Warning Industrial beacons:
A range of rotating and flashni warning beacons designed to be durable in harsh industrial environments. |
|
60 mm ø large effective warning beacon WLK
IP 65 - for indoor and outdoor
Mounting: horizontal, vertical, on tube
Easy industrial bulb change without tool Light emitting diode bulbs alternatively useable
(continuous or flashing light)
with pole connection box AS-Interface implementation and mounting with magnetic base possible
6 lens colours- 2 housing colours (grey/black) |
|
|
|
Visual alarms, Beacon lights, Stack lights
