|
|
Weber provides a number of solutions that will help make certain you are ready to meet new and emerging radio frequency identification (RFID) labeling specifications.
Our special smart label printers and printer-applicators encode data on ultra-thin RFID transponders embedded in labels and tags, while simultaneously printing text, bar codes and graphics. We also offer a special RFID applicator that encodes, verifies and applies preprinted pressure-sensitive smart labels. Both the RFID printer-applicator and encoder-applicator include a special feature that rejects and recovers non-compliant smart labels prior to application. In addition, we offer smart labels for use in our own RFID encoder-printers, plus a range of pre-encoded labels and tags to satisfy associated identification applications.
The emergence of RFID mandates presents an exciting new opportunity to improve the way all of industry captures and uses product data throughout the supply chain. Weber is working very hard to ensure that our customers will have a dependable source on the leading edge of RFID development.
|
|
The Label-Aire Model 3138-N RFID Printer Applicator brings RFID technology to your print and apply operation and keeps you ahead of your competition.
The Model 3138-N RFID Printer Applicator delivers on its promise of accuracy, reliability, and ease of use. That translates into lower operating costs and increased productivity for your business.
The 3138-N RFID comes standard with such Label-Aire virtues as easier setup, troubleshooting, and change-over, and more reliable operation while allowing you to easily encode RFID tags.
The 3138-N RFID is based on Label-Aire's most advanced printer applicator, the 3138-N. The 3138-N RFID’s advanced features include automatic setup with multiple programmable label pages for easy change-overs to labels of different sizes, rate compensation for improved label placement accuracy, and advanced user-configurable I/O connectivity. All these handy features greatly simplify setup and change-overs. This unit's advanced RFID features include EPC, Class 0, Class 0+, Class 1, Gen 2 RFID tag encoding, fully integrated UHF/EPC print-and-apply technology, user friendly Label-Aire RFID tag formatting software, and an innovative Tag Rejecter mechanism. Like all Label-Aire printer applicators, the 3138-N RFID is compatible with any O.E.M. RFID printer on the market.
Put this most advanced RFID printer applicator to work for your company all day, every day. The Model 3138-N RFID Printer Applicator is built to meticulous quality standards and designed to withstand the most intense operation.
|
|
APL 8000 Series
Self adhesive labels up to 6" print width Print & Apply System for one side labelling. Designed to apply GS1 - 128 pallets labelling delivering the best high quality printing. Exceptional printing quality due to the A-Class Datamax print engine
|
|
Self-adhesive labels real time Print & Apply System for palets three panel labelling. Designed and produced fulfilling all requirements to obey GS1-128 Application Identification Standards.
Printing and application are carried out automatically and effectively, turning into a high profitability equipment. Due to its flexibility easily adapts when variable data label printing and application is needed in half speed situations. Exceptional print quality obtained with the up to 300dpi Intermec´s EasyCoder PX4i/PX6i engine.
|
|
|
APL 8300. Self Adhesive labels up to 6” print width. Print and Apply System for three panel labelling. Exceptional quality printing due to its A-Class printing engine from Datamax
|
|
Videojet P3400 Label Printer Applicator
The Videojet P3400 label printer applicator is easy to use and maintain, and features the versatility of modular spares to deliver maximum uptime and performance. Available with multiple printer options and a variety of application choices, the Videojet P3400 provides a customizable, off the shelf solution.
Simple, modular design
RFID Enabled
High quality thermal transfer printing
Built to last in the most rugged industrial environments
User configured beacon and status output
Multiple label configuration menu
Flight time compensation for automatic label placement control
Ethernet connectivity for set-up and control
*THIS ITEM IS CURRENTLY AVAILABLE ONLY IN NORTH AMERICA
|
|
* Ij3000 XLS Controller :
The Ij3000 XLS Controller was designed and built to meet any demanding coding application. Diagraph has engineered the XLS Controller to exceed performance expectations. The XLS Controller seamlessly integrates Impulse Jet and Integrated Valve technology offering a networking function that delivers reliable, high quality printing to any automated production enviroment.
* Ij3000 ES Controller :
The Ij3000 ES Controller is a powerful, low-cost web-server based HMI features a color touchscreen display, drives Diagraph’s Integrated Valve or Impulse Jet printheads, and has a 100-base T Ethernet network port for web browser, network connectivity. Diagraph has created special package “Ij3000 ES kits” for dual head Integrated Valve 9 or 18 dot printhead applications and has special introductory offer. Interested parties should call 800-722-1125 for details.
* NEW! IV-18 Dot Printhead for IJ3000 Ink Jet System
Diagraph is pleased to introduce the IV18-Dot Printhead for the Ij3000 Integrated Valve Large Character Ink Jet System. Key Standard Features Include: Two-piece, die-cast aluminum housing, environmentally sealed printhead for harsh environments, robust metal housing over entire printhead, built-in LED display and membrane switch for: -->channel purge (one or all channels) -->electronic pulse width (dot size) adjustment -->pressure gauge, automatic first dot correction, overdrive protection, photocell mounting bracket holes, backwards compatibility with existing Ij3000 and Series 1 printheads. The IV-18 Dot Printhead is driven by Diagraph’s Ij3000 Ink Jet Printing System.
|
|
|
APL 8200. Self adhesive labels Print and Apply System capable to fit to any packaging line. Designed and manufactured to apply GS1 pallet labelling delivering the best high quality printing due to its printing engine A-Class from Datamax. Specially projected for self-adhesive dual panel labelling applications
|
|
Self - adhesive labels real time Print & Apply System for pallets dual panel labelling. Printing and application are carried out automatically and effectivelly, turning into a high profitability equipment.
Controlled by a PLC, It can easily be adapted to all packaging lines using synchronisation and guided alarm signals. Due to its versatility can be connected to any kind of information system: Windows NT, UNIX, AS/400, PC, etc. and ERP environment.
It is capable of working in stand - alone mode thanks to its alphanumerical keyboard and powerful label edition program.
|
|
Burt labelers are exceptional for any roll through application. This horizontal labeler accommodates diameters from 112 to 704 and will run metal, glass, plastic and aerosol containers.
-Models: 408 and 704
-Speeds up to 800 CPM
-Labels replenished without stopping production
-Narrow label packages available
-Container changeovers in 15 minutes
-Valco lap system available
|
|
As the pioneer in the Hand Labeller Market and with a track record second to none, SATO has a complete range of hand-held labelling systems. Ideal for "price marking" applications, sales messages and industrial marking requirements, a variety of models are on offer to suit your individual requirements.
• Durability
• Increased Productivity
• Precise Printing
• Easy-to-use
• Variety of Layouts
|
|
Hand Labellers
SATO - Pioneers in Hand Labellers
SATO developed the World's first hand labeller in the sixties. The company's founder the late Yo Sato saw the development of supermarkets and realised that there was a requirement to label each item with price. He set about developing the world's first hand labeller.
Today, SATO has a complete range of hand held labelling systems. Ideal for price marking applications and sales messages, a variety of models are on offer to suit your individual requirements.
All SATO hand held labelling systems are built and tested to the same standards. With a durable construction engineered for high productivity, simple loading systems for ease, speed of use and clear print images for conveying the perfect message, users are guaranteed a quality product, whatever model/s they choose.
- 1-Line Hand Labellers
- 2-Line Hand Labellers
- 3-Line Hand Labellers
- Promo Hand Labellers
- Hand-held Tagger
- KENDO & JUDO Hand Labelling Systems
|
|
The group of weighing and automatic labelling at Gemini high speed functions under a computing system able to treat the weighings with speeds going to 150 products per minute.
For detailed information, visit www.preciamolen.com
|
|
Labeljet 210 Label Applicator
TheLabeljet 210 is a modern, microprocessor controlled, industrial label applicator. The integral stepper motor drives the label web at up to 98.4 feet per minute (30 m/min.). A shaft encoder input (for speed compensation) is standard, and optional application methods include tamp and blow modules
- Fast, accurate and simple operation
- Low maintenance
- High speed
- Stepper motor with microprocessor control
- Storage of multiple production settings
- Airjet, non-contact application
- Touch and tamp modules with various strokes
|
|
Weber's new Alpha V40 label applicator provides fast, dependable labeling for a diverse range of applications. This versatile system employs the wipe-on or tamp-blow method to apply pressure-sensitive labels in line at high speed.
The Alpha V40 automatically peels labels from the liner, then gently but firmly affixes them to products or packages as they pass by on a conveyor line or other handling system.
The wipe-on unit applies labels up to 4.72" wide and 19.7" long (98? long optional) at speeds up to 210 feet per minute, while the tamp-blow model handles labels up to the same width and 6.3" long. Both systems apply labels to an accuracy of ±0.04".
The system can be configured to label the sides, tops or bottoms of products. For added application utility, it is available in both right- and left-hand versions.
|
|
Label Applicators : LAP4500
The LAP4500 is a unique printer-applicator specifically designed for use with glass or plastic tubes and vials. It will print a label and wrap it around a small cylindrical container in approximately three seconds. The LAP4500 combines the proven performance of a 600 dpi Zebra printer with a unique arrangement of rollers to provide a full wrap or partial wrap label on-demand.
Scientists and other specialists often label tubes and vials manually in a busy laboratory-a time-consuming and costly exercise. While label printer-applicators are available for most flat surfaces, precision automatic labeling of glass or plastic labware has been ignored. The LAP4500 addresses that need in a cost-effective way, extending lab automation into areas previously handicapped by manual processes.
|
|
Dimensions: Height: 30.41" (772.5 mm), Length: 33.44" (849.3 mm), Width: 22.84" (580 mm)
Weight: 145 lbs. (65.7 kg)
Standard Label Dimensions: Max. Web Width: 7.13" (181 mm), Min. Web Width: .63" (16 mm), Min. Label Length: .5" (13 mm)
Label Packaging: 12" (305 mm) O.D. rolls std. on 3" (76 mm) I.D. cores, Up to 16" (406 mm) rolls with powered rewind
Dispense Speed: Up to 1,500" (3,810 cm) of web per minute (standard), up to 2,000" (5,080 cm) of web per minute with smart powered rewind
Label Dispense Accuracy: Up to +/- 1/64" (.4 mm)
Electrical: 115 Volts AC 60 Hz 3 Amps., 220 Volts AC 50 Hz optional
Air (as needed): 2 cfm at 60 psi to 90 psi when imprinter is used
Options: Smart 20" (508 mm) powered unwind and powered rewind, 6" (152 mm) label core adapter, Encoder kit for Automatic Speed Following, Strobe signals for "low label" and "out of labels", Clear label sensor upgrade, Hot stamp imprinter, Display tilt mounting brackets, Model 2700 T-Base stand
|
|
Label Dispensers : LD250
The LD250 is an automatic label dispenser designed to work with rolls of labels up to 4.5" wide. Labels can be easily loaded in a matter of minutes. It is operated by a simple on/off switch. Labels are sensed with an adjustable switch. An optional sharp edge plate is available for more compliant materials.
Benefits:
Increase productivity
Rugged design makes it suitable for use in any semiautomated environment
Can be easily carried from location to location with a
convenient handle
Features:
Photoelectric sensor precisely positions each label
Sensor ensures label will be consistently and reliably positioned without wear or need for adjustments
Eliminates need for mechanical senors that rely upon label stiffness to activate
A built-in redundancy feature is included to permit operation even without the sensor
Can accommodate a variety of labels up to 4 inches wide and 4 inches long
Runs at a speed of approximately 2 inches/second
Includes a removable, disposable reel to hold the stripped-off waste material
Plugs into any normal 110v AC wall outlet
Stands 6" x 18" x 13" and weighs 19.25 pounds
A fixed position, built-in scanner confirms the readability of the bar code
Scanned information can be transmitted to host
Data scanned can be sent to next scanner on-line
|
|
SERIES DISTRIPOSE
Semi-automatic distributer of adhesive labels in roller.
2 models available:
for labels going until 140mm of width: SH404
for labels going until 200mm of width: LD200
MULTIPOSE
Multi-distributer of adhesive labels.
3 versions available for supports labels of maximum width 48mm (70mm for the last cassette):
Model 3 cassettes
Model 4 cassettes
Model 5 cassettes
ADHESIVE RONDAPLIC
Semi-automatic labelling machine for cylindrical objects.
Possibility of posing 1 or 2 labels.
Deposit by hand drive operation.
SERIES LR and MC10
3 models available:
- D-roller of labels: MC10 for labels active until 124mm of width.
- D-roller of labels: LR800 for labels active until 150mm of width.
- Uncurler D-roller of labels: LR1000 for labels active until 180mm of width.
|
|
Designed specifically for the wire and cable industry, the SwiftMark sets a new standard in labeling efficiency. The SwiftMark automatic label printer and applicator prints self-laminating vinyl labels and applies them to various sizes of wire and cable, increasing labeling productivity up to 400%. With a cycle time of just over 4 seconds, the SwiftMark can print and apply labels in a fraction of the time required to manually print and apply labels which increases productivity and reduces labeling errors, while providing the highest printing and application quality. Too see the SwiftMark in action please watch our video.
Labels can be quickly and easily designed in the accompanying Tagprint Pro software, and label files can be downloaded and stored on the SwiftMark via a USB, Parallel port, or serial connection. Simply select the file and label quantity using the user-friendly touch screen, and labeling is as simple as placing the cable in the machine and pressing a button or foot pedal.
The SwiftMark has a simple interface which makes it very easy to use, yet it is capable of printing advanced label sequences such as label sets with different serial numbers and text on each label.
|
|
Whether you need a thermal-transfer printer for low-volume labeling or a non-contact, high-speed printer-applicator that fits on your production line, Weber has the solution to your labeling requirements.
Label Printer-Applicators
These sturdy, self-contained units combine a high-density thermal/thermal-transfer label printer with an automatic label applicator to simultaneously print and apply pressure-sensitive labels to the tops, bottoms or sides of products right along the conveyor line. Units also are available to satisfy the requirements of RFID encoding, printing and application.
Label Applicators
Weber also offers a complete line of automatic label applicators, which rapidly apply preprinted pressure-sensitive labels to all types of products and cartons. We also provide systems that encode and apply RFID smart labels.
Label Printers
Weber's broad line of label printing solutions utilizes the foremost printing technologies to simplify on-site, industrial labeling. Our selection of thermal-transfer and direct-thermal systems offers label printing solutions for virtually any application, including RFID encode and print needs.
|
|
- Dimensions: Height: 63.9" (1,623 mm), Length: 120" (3,048 mm), Width: 84.8" (2,154 mm)
- Weight: Approx. 1,000 lbs. (454 kg)
- Electrical: 120 Volts AC 60 Hz 20 Amps., 220 Volts AC 50 Hz optional (CE)
- Air (as needed): 4 cfm at 90 psi to 100 psi required for air-blow and tamp-blow applications
The NEW Label-Aire Inline Series 6000 labeling system is designed to be very easy to configure while also making labeling easier and faster... making you more profitable.
The Inline Series 6000's long list of optional features allows you to easily build a system to meet your specific labeling requirements. Need a simple wrap conveyor system? Or instead, a high-speed front/back system with dual feedscrews and a top trap hold down? With the Inline Series 6000, you can have it your way.
The versatile Inline 6000 is an open frame labeling system that can be outfitted with Label-Aire's full range of Label-Aire New Generation 3100 Series applicators (wipe-on, air-blow, or tamp-blow) and features a delrin chain conveyor in lengths of 6 feet to 12 feet (1,829 mm to 3,658 mm) with a choice of 4.5 inch (114 mm) or 6.0 inch (152 mm) conveyor widths.
|
|
2 models of autonomous saddle jib cranes thanks to a refillable integrated battery :
HALLO EM21:
To pose your labels without efforts at high speed.
Format of the labels minimum:23mm (width of the siliconé support) lx17mm; maximum 52mm (width of the siliconé support) x100mm; with or without removal of caterpillars.
HALLO EM22:
Model more specifically adapted to the labelling of the fruits.
Same design features with the difference of the format of the labels: minimum:23mm (width of the siliconé support) lx17mm; maximum 33mm (width of the siliconé support) x100mm.
|
|
The group of weighing manual labelling I 500 makes it possible to carry out the labelling of the fresh produce in the small boats under films.
Of a great facility of use thanks to its touchscreen, I 500 gives access easily the operations of weighing labelling (use, programming).
I 500 was designed for an integration in the corporate network (operation multipost, exchange of information by network, Ethernet TCP/IP or key USB, connection to the databases of the company.
Its great memory size is the guarantee of a traceability total (number of operation and single DSD, management of the batches, data of traceability skeletal per family of products.
For a faster seizure of the data, the terminal I 500 can be equipped with a keyboard of the type PC and a reader of bar code.
The group I 500 is composed:
Of a terminal of weighing I 500:
- an accessory measures
- 2 ports series
- 1 parallel port
- 1 port USB
Of a platform R1 DLS
Of a printer P950 or P970
Of a key USB 64 Mo
Of CD creation of labels
In option:
- second printer
- second and third ways of measurement
- Ethernet port
|
|
|
|