- Detection - Measurement >
- Temperature and Humidity Measurements >
- Other temperature and humidity measurement equipment
Other temperature and humidity measurement equipment
SenseCAP S1000 10-in-1 Compact Weather Sensor measures air temperature, relative humidity, barometric pressure, light intensity, rainfall (optical), wind speed, wind direction (ultrasonic), PM2.5, PM10 and CO2. It is ideal for application ...
Seeed Studio
SenseCAP S800 8-in-1 Compact Weather Sensor measures air temperature, relative humidity, barometric pressure, wind speed, wind direction (ultrasonic), PM2.5, PM10 and noise. It is ideal for application in a rough environment like the ...
Seeed Studio
SenseCAP S700 7-in-1 Compact Weather Sensor measures air temperature, relative humidity, barometric pressure, light intensity, rainfall (optical), wind speed, and wind direction (ultrasonic). It is ideal for application in a rough environment ...
Seeed Studio
High accuracy No external power required Self-emptying tipping-bucket design Forty foot (12 meter) cable User-configurable for 0.01" or 0.2mm rainfall increments
The WIBOND bar graph provides the ideal conditions for displaying of values and trends: Resolution: any The required resolution and the division into bars are based on the information for display. Display width: any The display ...
The vertical research Dilatometer series L75V was developed to meet the demands of the academic community and research laboratories worldwide. With this system thermal expansion behavior of solids, liquids, powders and pastes for a variety ...
Linseis Thermal Analysis
The EE75 air velocity transmitters are optimized for high accuracy up to 40 m/s (8000 ft/min) over the temperature range -40...120 °C (-40...248 °F). The high-end air velocity sensor element operates on the hot film anemometer principle ...
E+E ELEKTRONIK
Connects directly to 6712 and Avalanche Samplers, 4200 Flow Meters, and 4100 Flow Loggers The Teledyne Isco 674 Rain Gauge is a precision instrument that uses a tipping bucket design for accurate rainfall measurement. It has an 8 inch ...
Process indicator for analogue signals. Displaying a process, temperature, load cell or potentiometer signal in engineering units. Mounting: 48x96mn panel Input: Process, RTD100, Thermocouple Display: 4.5 digits Supply: 10-70 Vdc and ...
If you're doing a microclimate or evapotranspiration study, you may need up to four extra sensors to get important measurements that will benchmark your data. Not to mention facing the hassle of getting all those sensors integrated into ...
Meter Group
Measuring range (%): 0 % - 100 %
Precision: 2 %
Working temperature: -20 °C - 80 °C
How energy efficiency is improved Precise measuring of humidity for energy-efficient control of HVAC installations and monitoring energy consumption Features Measures the relative humidity and temperature in air ducts Measurement ...
Fr. Sauter AG
The AVT is an electronic air velocity and temperature transmitter for air and non-combustible gases with optional relay output. AVT series air velocity transmitters are engineered for building automation in the HVAC/R industry. The AVT ...
HK INSTRUMENTS
The PRODUAL KLH 100 humidity and temperature transmitters feature a range from 0 to 100% RH, temperature from 0 to 50 °C, 24 V AC/DC supply, with maximum of 1 VA (1,528 V AC/DC), dimensions of 86 x 86 x 32 mm, output from 0 to 10 V, with ...
Produal Oy
200 cm2 area rain gauge with with 0.2 mm rain resolution - ±2% accuracy - Pulse output - Aluminium alloy with stainless weighbridge.
Minco humidity and humidity/temperature transmitters are designed using an advanced microprocessor. Digital signal processing allows these transmitters to precisely match the characteristics of the humidity sensor to a wide range of RH ...
Constructed of thermoplastic and stainless steel components, the 200P resists corrosion and features a high strength-to-weight ratio. The 200P is directly connected to a precision conductive plastic potentiometer located in the main body. ...
NRG Systems
The patented ARCTIS (Active Road / Runway Condition Temperature of Ice Formation Sensor) sensor is used as a complement to the passive BoPAS or BOSO sensor. The ARCTIS sensor surface is submitted to cooling and heating cycles generated ...
Boschung Mecatronic AG
The RAF/A humidity sensor with transducer measures the relative humidity 0...100% r.H. of the ambient air by a capacitive sensor and transforms it to a standardised output signal 0-10 V or 4-20 mA. The humidity sensor is protected against ...
FuehlerSysteme eNET International GmbH
• Professional meteorological application • Wind turbines on- and off-shore • Ship weather station • Building automation and environmental engineering • Traffic and industrial meteorology • Wind warning and event engineering • Photovoltaic ...
Wilh. LAMBRECHT GmbH
The new FE1036 retarder-prover controller kit is designed to allow the installer to easily assemble and reduce wiring and power components. The power board, enclosed in a watertight box, is connected by means of special wiring to the ...
Fasar Elettronica S.r.l.
WSX53 replaces the WSX43. It detects all forms of precipitation (rain, snow, hail, sleet). It is able to discriminate between rain and snow. It has two volt-free change-over contacts which are activated in response to precipitation and ...
Abbey Electronic Controls
Combining an Humidity Indicator and Relief Valve have the advantage of only require one hole to be fitted to equipment or containers where space is limited. They are designed for mounting in moisture sensitive electronic or electro-optic ...
Brownell Diatero
PUREGAS offers moisture indicators to provide an inexpensive way to monitor a dry compressed air system. The moisture indicator should be installed after the air dryer or on the dryer outlet. The Moisture indicator shows a color change ...
Contact changeover Mounting Wall (also with snapmounting type HYWe-SG-P) Protection type IP 30 Setting range 35 - 100% rF Operating difference ca. 4% Sensor type Synthetic fiber Voltage 24 - 250 V AC Switching current - ohmic (inductive) ...
Lm-therm
The rain sensor reports rain to the sensor switch LRW12D connected in series once per second. A standard telephone wire is sufficient as connecting lead: J-Y(ST)Y 2x2x0.8 or equivalent. 100m line length is permitted. Solid plastic housing, ...
The RWS-30 Road Tunnel Weather Sensor is designed for use in road and tunnel applications where accurate and reliable visibility measurements are required. Application: Roads and Transport The RWS-30 Road Tunnel Weather Sensor ...
Biral
Wireless rain gauge with many functions Determines rainfall amount, number of rainy days and average rainfall for the WeatherHub system. Additional 18 months history and graphical evaluation of values, min/max function and data export option
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining