Dew point or ppmV moisture content output Accuracy ±2 °Cdp Traceable calibration certificate Low cost of ownership and easy maintenance with sensor exchange program 316 Stainless steel sensor and sample blocks MiniDIN 43650, M12 ...
Accuracy ±1 °Cdp (±1.8 °Fdp) Traceable 13-point calibration certificate 450 bar (6527 psi) pressure rating Low cost of ownership and easy maintenance with sensor exchange program 3/4” UNF industry standard process connection EN ...
Measurement range: -120 °C - -40 °C
Stable and repeatable measurement Fast response Economical and advanced monitor solutions Dew-point or moisture content output 4...20 mA and Modbus RTU over RS485 outputs Traceable 7-point calibration certificate 1/2”, 1/4” male ...
Measuring range (%): 0 % - 100 %
Precision: 2 %
Measuring range (temperature): -40 °C - 100 °C
Temperature / Humidity Transmitter Temperature / Humidity Transmitter TRH-300D( Duct Type)_TRH-300W (Wall Type) Temperature / Humidity Transmitter TRH-300 S (Separated Type) facebook Download Now ! Product ID: TRH-301. ...
The Rota-Sonde TS5500 measures the position of a hot product (steel, copper, brass, other alloys) within its field of view and provides an output which is proportional to the angular position of the product within that field. The Rota-Sonde ...
The The Rota-Sonde is a device that is manufactured by Delta. It is used to measure the position of a hot product like steel, copper, brass. It works with temperature as low as 250 °C. The device can only measure position of hot products ...
New R.H. Transmitters THR Series, with capacitive or fiber dilation sensor. Dual 4-20 mA 2-wire RH% and ºT outputs. Available types for wall rooms, chambers or process mounting. Special types for high pressure and temperature. For ...
Measuring range (%): 0 % - 100 %
Precision: 2 %
Working temperature: -30 °C - 80 °C
Humidity transducer, current output 4÷20mA or voltage output 0÷10V, wall-mounted housing IP65 Product Description • - high quality digital sensor of the relative humidity with protective filter (ABS housing as a standard and the stainless ...
Temperature & Humidity LED Displays with Plug-in Internal or External Sensors USB / RS485 / LAN / LAN PoE Interface Options ! NEW models - available from 2019 ! Would you like to know what is the current air temperature and humidity ...
For stationary dew point monitoring of refrigeration or adsorption dryers. The touch screen graphic display enables an intuitive operation and shows the progress of the measured values. 2 alarm relays are available for monitoring of threshold ...
The dew point meter DP 500 with data logger is the ideal portable service instrument for dew point measurement for all types of dryers down to -80°Ctd dew point. The 3.5“ graphic display with touch screen makes the operation very easy. ...
The LK model is manufactured by Galltec Mela, and is a humidity temperature sensor that is utilized in heating, ventilation and air conditioning. It is a duct version with output signals of 4 to 20 mA. It also has an output range of 0 ...
Galltec Mess- und Regeltechnik GmbH
The Humidity and Temperature Sensors for HVAC with the Type KL, PL, WL is characterized as an economic transmitter since it measures humidity and temperature relatively. The device is manufactured by Galtec Mela Humidity Measuring Technology. ...
Galltec Mess- und Regeltechnik GmbH
The D series is an array of capacitive relative humidity and temperature sensor manufactured by Galltec. It is equipped with a digital calibrated dModul for individually processing the measurement values of relative humidity and temperature. The ...
Galltec Mess- und Regeltechnik GmbH
Single channel temperature transmitter for stand alone installation in IP67-Waterproof case. Ideal for building automation, HVAC and GMP monitoring with 1 analog and 1 RS485 Output. • Single channel temperature transmitter in waterproof ...
For recording any kind of precipitation (rain) with its intensity in the nature usually tipping bucket precipitation gauges and samplers are used. If precipitation has to be measured also in winter with temperatures below the freezing ...
The HDI sensor measures the impact of individual hailstones on a stainless-steel disc using a special acoustic detector, signal processing and calculation. The sensing surface is a 200 mm diameter omnidirectional head, containing the ...
EXTREMELY ROBUST AND RELIABLE ACOUSTIC RAIN SENSOR The RHD is a low-cost, high precision and ultra-robust rain sensor. It features very low-power consumption, is maintenance-free and has a completely sealed acoustic detector with no ...
Trace moisture measurement in neutral and corrosive gases AQUATRACE® ATT550 trace moisture transmitter ppm / ppb IoT-ready Designation: ppm / ppb Trace moisture transmitter IoT With the ATT550.W.X.Y.Z we present a new type of AQUATRACE® ...
DKS GmbH
Low cost, compact & easy to install The PVmet-100 is an innovative sensor platform for PV monitoring. Low cost, compact, and easy to install, it delivers accurate, bankable data and ships fully assembled and factory calibrated. PVmet ...
On-Line with PC Controller Designed for use on the production floor, moisture content can be transmitted to process control loops for automated monitoring and production optimization. Integrated air purge, humidity, and temperature ...
Quality product for HVAC sector, accuracy ± 3 %calibratable dew point control switch HYGRASGARD® TW - Modbus incl. strap ⁄ with detached sensor head, with Modbus connection, terminal box enclosure made of impact-resistant plastic, enclosure ...
S+S Regeltechnik
Measurement range: -100 °C - 20 °C
The SDHmini-Ex hand held hygrometer sets new industry standards for portable dew point measurement equipment. Intrinsically safe and portable, this hygrometer offers quick and reliable spot check measurements of dew point and trace ...
Measurement range: -100 °C - 20 °C
The world renowned Model SADP-D digital, portable dew point meter from Shaw Moisture Meters offers an easy to use hygrometer for fast and reliable trace moisture measurement. Designed to operate at atmospheric pressure, the Model SADP-D ...
Building systems technology in very general terms comprises electrical and electronic equipment and automation devices for industrial, commercial and private buildings. These equipment and devices range from bell transformers to the Dupline ...
COMECO’s RHB probe is designed especially for low-cost HVAC applications. Using solid-state sensor with integrated digital signal conditioner, the probe measures relative humidity of air and non-aggressive gases at atmospheric pressure, ...
Comeco Control & Measurement
Temperature/Humidity Transmitter EE210 for wall mounting, range 0..100%RH, -40..60°C, output 4..20mA, with snap-in plate and Manufacturer's calibration certificate at 0°C, 40°C and 35%, 80% at 23°C Characteristics • Product type: ...
Oil flow indicator (referred to indicator below) is the device to monitor and indicate the variation of oil flow in the oil circulation cooling system of transformer. Specifically, it is used to indicate whether the rotation of oil pump ...
The PRODUAL KLH 100 humidity and temperature transmitters feature a range from 0 to 100% RH, temperature from 0 to 50 °C, 24 V AC/DC supply, with maximum of 1 VA (1,528 V AC/DC), dimensions of 86 x 86 x 32 mm, output from 0 to 10 V, with ...
Produal Oy
The KLHJ 100 Humidity and Temperature Transmitters can be employed for various measuring applications. They are well suited for both indoor and duct operating. An output ranging from 0 to 10 Vdc is incorporated. The transmitters are ...
Produal Oy
The KLK 100 and KLK 100-N are humidity transmitters. They are created in order to detect humidity and temperature inside ventilation ducts. The device can be mounted with flange. Its depth is adjustable of < 150 mm. The housing of the ...
Produal Oy
The TQC Sheen DewCheck 4 - Dewpoint Meter (DPM)/ Dewmeter is an extremely versatile dewpoint meter to measure and record all climate parameters required to treat surfaces. This easy to use and robust dewmeter conforms to ISO 8502-4 & ...
Measuring range (%): 0 % - 100 %
Precision: 2 %
Resolution: 0.1 %
DHM1OOH series high-temperature humidity module is a modular product specially customized and designed according to the needs of customers, and can be customized according to the customer's needs for various types of output interfaces, ...
Temperature Sensor Input (NTC, PTC, PT-100 and ProNem Mini PMI-P) Auto-Tune PID Humidity Sensor Input (0/2..10V, 0/4..20mA and ProNem Mini PMI-P) 4 Digits Temperature and 4 Digit Humidity Display Heating Control Output, Heating ...
The TBSWV1 is a versatile wind vane with SDI-12 interface. It provides two operation modes. It can either measure momentary wind direction, or measure average wind direction over a configurable logging period. It is based on a rugged ...
The TBSLWS1 leaf wetness sensor mimics the wetness state of a real leaf. The measurement value is proportional to the percentage of the sensor surface covered with water. The sensor is equipped with a SDI-12 interface for measurement ...
The TBSRGM1 is a retrofit module to equip tipping bucket rain gauges with data logging capability and SDI-12 interface. The TBSRGM1 has been designed to work with any type of tipping bucket rain gauge with switch outputs. The TBSRGM1 ...
Please specify:
Help us improve:
remaining