Memory capacity: 114,000, 56,000 unit
The DCX-22 data loggers achieve the highest measurement accuracy and are available in three different models – as Sealed Gauge, Vented Gauge or cable-free. Thanks to their long-life battery, they can keep measuring the water level, water pressure and ...
KELLER Pressure AG
Memory capacity: 114,000, 56,000 unit
The DCX-22AA data loggers compensate for changes in air pressure by means of a separate, water-tight absolute pressure sensor with a stainless steel separating diaphragm. Unlike gauge pressure systems with a capillary tube, this system is completely resistant ...
KELLER Pressure AG
Memory capacity: 114,000, 56,000 unit
The DCX-22-ECO data loggers are a cost-effective alternative to the highly accurate DCX-22 loggers and are only available in the cable-free «cigar» design. Thanks to their long-life battery, they can keep measuring the water level, water pressure and ...
KELLER Pressure AG
Memory capacity: 2,000,000 unit
Level Data Loggers are the ideal measurement devices for reliable measuring of water level and temperature, conductivity or pH-value or further parameters in groundwater, at springs or lakes. Appropriately to the measuring requirements diverse loggers ...
SOMMER Messtechnik GmbH
... For recording any kind of precipitation (rain) with its intensity in the nature usually tipping bucket precipitation gauges and samplers are used. If precipitation has to be measured also in winter with temperatures below the freezing point, the measuring ...
SOMMER Messtechnik GmbH
The HDI sensor measures the impact of individual hailstones on a stainless-steel disc using a special acoustic detector, signal processing and calculation. The sensing surface is a 200 mm diameter omnidirectional head, containing the electronics of the ...
SOMMER Messtechnik GmbH
... MyALARM2 is a control unit designed for remote control of houses, buildings, plants, production machines, or remote sites, via GSM or SMS. The BASIC version MY2B includes an NTC sensor, 4DI, 2AI, 2DO (optional), and data logger functions. The unit can ...
... MyAlarm2 is a control unit designed for the remote control of houses, buildings, plants, production machines, or remote sites, via GSM or SMS. The MY2S version, with voice alarms and DTMF tones support, extends the application fields as a burglar and ...
MyALARM SeAL is a data logger able to meet the growing needs of data acquisition, real-time analysis, integration with IT systems, and control logic. In line with the new Industry 4.0 and Internet of Things productivity and communication models, MyALARM ...
... 0.1mm Tipping Bucket Rain Gauge (light rainfall) with Heater The Casella Tipping Bucket Rain Gauge (TBRG) is a reliable and extremely robust transducer, designed as a stand-alone sensor for operation with an existing logging system. The body and funnel ...
Casella
... 0.2mm Tipping Bucket Rain Gauge (light rainfall) without Heater The Casella Tipping Bucket Rain Gauge (TBRG) is a reliable and extremely robust transducer, designed as a stand-alone sensor for operation with an existing logging system. The body and ...
Casella
... 0.5mm Tipping Bucket Rain Gauge (light rainfall) with Heater The Casella Tipping Bucket Rain Gauge (TBRG) is a reliable and extremely robust transducer, designed as a stand-alone sensor for operation with an existing logging system. The body and funnel ...
Casella
Measuring range (%): 0 % - 100 %
Measuring range (temperature): -30 °C - 50 °C
Accuracy (temperature): 3, 2, 0.5 °C
... • Measuring temperature and relative humidity with a „single-chip“-sensor • Fast response time • Digital transmission from sensor to the evaluation electronics • Additional computed values: dew point temperature, absolute humidity, wet bulb temperature ...
Arthur Grillo GmbH
Air velocity: 0 m/s - 20 m/s
... Supply voltage 24 V AC / DC ± 20% Output signal 0...10 V (max. 1 mA), 4...20 mA Time constant 1.5s Accuracy ± (0.2 m/s + 3 % of the value) at 0.2...10 m/s ± (0.2 m/s + 3 % of the value) at 0.2...15 m/s ± (0.2 m/s + 4% of the value) at 0.2...20 m/s Damping ...
Arthur Grillo GmbH
Measuring range (%): 0 % - 100 %
Measuring range (temperature): -40 °C - 120 °C
Accuracy (temperature): 0.5, 2, 3 °C
... • Measuring temperature and relative humidity with a „single-chip“-sensor • Digital transmission from sensor to the evaluation electronics • Sensor interchangeability without need for re-calibration Humidity-/temperature transmitter in three different ...
Arthur Grillo GmbH
... TSI is excited to announce the addition of ISO 17025:2017 accreditation for select TSI branded ventilation test instruments. ISO 17025 accreditation is a globally-recognized benchmark for precision, accuracy, and reproducibility of analytical results. ...
Have confidence in your readings !Developed to meet all field and laboratory requierements, the Digital ODEON instruments combine the versatility of an easy-to-use, easy-to-read handheld unit.Rugged, reliable and IP-67 waterproof, the ODEON measures dissolved ...
... Thermal Monitoring Kit For Buildings The QRU-100 Thermal Monitoring Kit for Buildings is designed for building inspectors, energy audit specialists, researchers, and energy advisors. It is easy to use, lightweight and comes pre-configured and ready ...
... Thermal Monitoring Kit The QHT-10 Thermal Monitoring Kit is a flexible heat flux and temperature monitoring solution, an ideal option for research and engineering applications as well as manufacturing control and monitoring processes. Pre-configured, ...
... Resolution - 0,001 °C Data output(s) - RS232 Weight [g] - 7750 - Weight [lb(s - 17,0858 ...
... The Rota-Sonde TS5500 measures the position of a hot product (steel, copper, brass, other alloys) within its field of view and provides an output which is proportional to the angular position of the product within that field. The Rota-Sonde TS5500 is ...
... The The Rota-Sonde is a device that is manufactured by Delta. It is used to measure the position of a hot product like steel, copper, brass. It works with temperature as low as 250 °C. The device can only measure position of hot products along the ...
Measuring range (%): 0 % - 100 %
Measuring range (temperature): -30 °C - 70 °C
... Compact sensor with stainless steel casing, resistant to pressure up to 25 bar Features • Operating temp. up to 80 °C • Accuracy H. ±2% r.h.(5…95 %rh at 10…40 °C) • Accuracy T. ± 0,2 K with voltage output • Accuracy T. -0.2… +0.6 K with current ...
... OEM duct version with Polyga® measuring element Features • Accuracy: ±2.5 % RH • very high accuracy in high humidity • washable measurement element • with the robust Polyga® humidity measuring element • Long-term stability • high-grade steel ...
... Humidity switch for monitoring the formation of condensation - prevents damage caused by condensation or excessive humidity Features • Operating temp. up to 60 °C • Accuracy: ±3 % RH • Long-term stability • Robust • Washable Polyga® measuring ...
... Range50-150 °C Case diameterØ 52 mm InputSensor Veglia ( 737-40 Ω ) Cover LensGlass IlluminationWhite HousingNylon PA66 ConnectionFast-on Power supply12/24 VDC Power consumption100 mA max + backlighting Operating temperature-20 +70 °C ProtectionIP67 on ...
The Hot Disk TPS 3500 is the state-of-the-art instrument for testing the Thermal Conductivity, Thermal Diffusivity, Thermal Effusivity and Specific Heat Capacity of tiny, highly thermal conducting samples. The capabilities of the TPS 3500 go well beyond ...
Hot Disk
... The popular Hot Disk TPS 2500 S is the core instrument of our portfolio. This multi-purpose, highly performing R&D thermal conductivity meter is designed for precision analysis of thermal transport properties of materials of all types: solids, liquids, ...
Hot Disk
... The Hot Disk TPS 2200 is a general-purpose, affordable R&D instrument for accurate measuring of Thermal Conductivity, Thermal Diffusivity, Thermal Effusivity and Specific Heat Capacity, when performance and price are both in consideration. The TPS 2200 ...
Hot Disk
... Device for measuring thermal transfers full scale, through a vertical plane wall The operating principle : The hot and cold enclosures are placed on either side of the wall to test… Each enclosure is set with a temperature controlled (cold side ...
Memory capacity: 500,000 unit - 2,000,000 unit
... Overview
The SRD-99 data logger is designed for monitoring and recording process variables such as temperature, pressure, humidity, level, pH, redox and flow. It combines a graphical display with flexible input configuration for industrial applications.
Features
- Graphical
... Overview
Multifunction air quality indicator reference TGP03/THP03. Real-time measurements of PM2.5, CO2, temperature and humidity. Unit is available with or without built-in display.
Model / Version
MOD. SD03 indicates the ...
... Innovative. Economical. Immediate. The Thermal Integrity Profiler (TIP™) uses heat generated by curing cement to assess the quality of cast in place concrete foundations such as drilled or bored shafts, augered cast-in-place (ACIP), continuous flight ...
Measuring range (%): 0 % - 100 %
Precision: 2 %
Resolution: 0.1 %
... Humidity Module DHM100 upto 200℃ for Environmental Chambers Practically maintenance-free humidity module DHM100 is an open frame module intended for integration into environmental chambers and other chambers with high temperature tolerance. This module ...
Measuring range (%): 0 % - 100 %
Precision: 0.15 %
Measuring range (temperature): 0 °C - 250 °C
... Anti-pollution High Temperature Humidity Transmitter upto 400℃ for Textile Energy Saving This high precision humidity transmitter DB43 is designed specifically for harsh industrial environments. It boasts exceptional high-temperature tolerance, robust ...
Measuring range (%): 0 % - 100 %
Precision: 1.5 %
Resolution: 0.1 %
... Cabinet Extractable Flue Gas Humidity Analyzer for Wood Processing DB450 MINI humidity analyzer is widely used in continuous emission monitoring system(CEMS) in the flue gas humidity measurement.It can also be used for humidity measurement and control ...
Remote water level data logger is a self-dissolving data logger. Based on a titanium alloy casing and a lithium battery power supply design, it can be immersed in liquid for more than 10 years for a long time. The built-in temperature sensor can be used ...
... Of measurement instruments for pressure, level, temperature of all trademarks. Of all control equipment : test benches, control cases for metrology, pressure reduction, inertness, pneumatic tests … MOUNTING OF SEPARATORS Diaphragm on pressure switches, ...
... pH, mV, Conductivity, TDS, Resistivity, Salinity, Concentration and Temperature measurement functions. 0.001pH, 0.1mV, 0.001µS/cm, 0.001mg/L and 0.1℃/℉ Resolution. Programmable Temperature Coefficient for conductivity measurement. Auto / Manual Temperature ...
... 0.001 pH resolution. Auto / Manual pH & Temperature Calibration. Auto / Manual Temperature Compensation. Auto-recognition of buffer solutions. A for one time test and continuous test. Display pH or mV with temperature Simultaneously. Fast & Easy ...
... The tester can measure pH, ORP (ORP probe optional) and temperature simultaneously. Cloud-based data management system – allows you to record, manage, and share your test data at your finger tip, never worry about data loss. Comprehensive Information ...
... PT100 / PT1000 Temperature Converter S2C-3 with USB & RS-232
The
S2C-3 sensor signal converter is a compact signal conditioner for PT100 and PT1000 resistance temperature detectors (RTDs) and enables the direct ...
... Easy to use instrument, insert the sample in the glass capillary and immerse the same in the heating group. Therefore, by regulating the temperature you can observe through the magnifying glass the moment in which the fusion is achieved by confronting ...