|
|
Description
Inputs
12 analog inputs
8 temperature inputs
8 (TOR) digital inputs
5 frequency inputs
1 supply input
1 CAN machine plug
1 Hand held terminal / Debug plug
Saving
Smart Media Card
Communication
Serial link RS 232
Sample frequency
Up to 500 Hz for analog, frequency and digital inputs
Up to 25 Hz for temperature inputs
Up to 1 Mbit/sec for the CAN bus
SD Canalogger set-up
Set-up with a PC using the Canalogger ExplorerTM software application or the hand held terminal with serial link
SD Canalogger protection index with its connectors
IP 65 (weather proofing)
Resistance
1m fall
Operating temperature
- 25°C to 70°C [- 65°F àto 182°F]
Mass 3.85 kg
Supply voltage 10 to 30 V
|
|
ALMEMO datalogger offer a professional measurement and documentation for research and developement applications and for process control. The instruments are available as various versions with many options and adaption possibilities. There are solutions for single measurements well as for complete data acquisition with a big quantity of measuring channels. The instruments can be installed as decentral data acquisition and in a network with up to 99 units. Nearly each sensor is adabtable via intelligent ALMEMO connectors or multisensor connection sockets. The measuring data can be transfered via radio transmission, modem, current loop, internet, ethernet or SPS. ALMEMO datalogger from AHLBORN are the gurantee for save data acquisition with professional measurement equipment.
|
|
LMS SCADAS Durability Recorder
Measure anything, anywhere, in confidence
LMS has created a dedicated mobile durability testing solution: the LMS SCADAS Durability Recorder with a smart-control mobile PDA. Ideal for real-time, on-location data validation and analysis, these rough and rugged tools are designed to seamlessly measure any load anywhere you may happen to test – on the road, the farm field, the proving ground or even a remote mining site. No matter where you take it, the LMS SCADAS Durability solution lets you test practically anything. Confidently.
|
|
The multifunction USB Data Acquisition Systems from Intelligent Instrumentation provide 16 analog inputs with up to 100 kHz sampling rate, 2 analog outputs and 16 digital channels. They are powered through the USB cable, which makes them ideal for mobile applications with notebook computers.
Connection to field signals are either made with a 50pin connector or built-in screw terminal blocks.
|
|
|
|
|
|
The DAQ500 Series are complete 16 or 32-channel multiplexed signal conditioning systems with a 16-bit resolution ADC and 10 BaseT Ethernet connectivity to a PC or laptop for setup, data display and processing. The ultra-compact 57.5mm (2.26") high, 112mm (4.41") wide, 220 mm (8.66") deep fully enclosed chassis weigh just 1.09kg (2.4lbs), making them suitable for in-vehicle applications. The DAQ500 Series chassis can be powered from DC voltage sources ranging from 10-18 volts. Power consumption is 10 watts for typical configurations, 30 watts maximum. Local data storage is available via a CompactFlashT module. Auto configuration on power-up provides stand-alone capability and along with the simple user interface makes data collection and storage a two-mouse click process.
The signal conditioning consists of 16 or 32 multiplexed differential input analog channels that can be configured with fixed 2-pole filters and fixed gains of 1/3 to 100. Filter options are available in a 1,2,5 progression from 10Hz to 1kHz. Filters and gain are configured in 8-channel groups. Input voltage ranges up to ±30 volts are supported. Channel inputs have over-voltage protection to 70 volts peak-to-peak. End-to-end channel calibration is accomplished by configuring the input multiplexers via software to receive a reference voltage provided by an internal calibrator.
Two channels of TTL level digital I/O are provided. These channels can alternately be configured as counter inputs. External sample clock and trigger inputs are provided as well. The internal sample clock can be programmed via software for sample rates from 0.0625Hz to 50kHz.
|
|
|
|
|
|
The USB-3101FS is a 4-channel, 100 kS/s simultaneously updating analog output module. The USB-3101FS also features ±30 V overvoltage protection, short-circuit protection, low crosstalk, fast slew rate, high relative accuracy, and NIST-traceable calibration. The USB-3101FS module includes a channel-to-earth ground double isolation barrier for safety and noise immunity..
Software included with the USB-3101FS is extensive, including TracerDAQ®, a full-featured, data logging, viewing, and analysis application; Universal Library™, programming libraries and drivers for most popular Windows-based programming languages; Universal Library for LabVIEW™, VIs and program examples for LabVIEW; and InstaCal™ installation, calibration, and test utility.
Product Highlights:
4 simultaneously updated analog outputs, 100 kS/s
16-bit resolution
±10 V analog output range
NIST-traceable calibration
-40 to 70 °C operating range
250 Vrms channel-to-ground isolation protects the module and computer from ground spikes, and ensures a reliable data stream
An on-board LED indicates the status of the device
Field connections are made to a 10-position screw-terminal block
Power for the USB-3101FS modules comes from the +5 volt USB supply from your computer. No external power is required
|
|
The TopLab device is designed for changing applications in laboratories and in R & D.
External devices (e.g. weighing machines, modems, large displays) can be connected to Message devices via serial ports. Communication is via Modbus (LAN). Communication via Profibus DP is also available.
Configuration of TopLab devices takes place via the user friendly "BusManager" PC software. Configuration data is transmitted to the device and securely stored there. Configuration data can be amended and adapted during operational run time.
Typical applications for TopLab devices are the acquisition of measurement and process data, as a data logger for universal measurement values, remote monitoring of decentralized plant and machinery, test bench and laboratory automation.
|
|
12 Channel Ultra Portable Acquisition System
Hummingbird is a new data acquisition system designed to provide a world-class ultra-portable solution for low channel-count dynamic data recording, real-time monitoring and analysis requirements.
Hummingbird features 4, 8 or 12 analogue input channels:
- 24 bit delta sigma A to D converter per channel
- Synchronous sample rates 5-200 kHz (up to 80kHz bandwidth)
- All inputs are configurable for AC, DC, ICP or Tachometer signals
- Each channel includes selectable ranges up to +/-1, 2, 5 or 10 volts
- Synclink interface to allow multi-unit operation
- < 1kg weight
|
|
|
|
|
|
Both the model 3310 and 3320 G-Loggers come complete with an RS-232 interface cable and the G-Logger Software Program which allows you to set up the G-Logger for a particular data acquisition mission, acquire your data,
and then transfer the resulting data to your in 95/98/NT4.0/2000 PC. No data acquisition card is needed because all the communication is handled via the RS-232 COM port on your PC. The G-Logger Software program is meant to be used in conjunction with a plotting program. Should you already own or choose to provide your own plotting software, the G-Logger Software Program can be set to output the data in ASCII comma delimited format which is readable by most any data graphing software
package.
The model 3310 is a standalone unit. The Model 3320 G-Logger is designed to be used with either one model 2420 triaxial accelerometer or up to 3 Model 2010 single axis accelerometers. In order to connect 1, 2 or 3 model 2010
accelerometers, a Model 3901 (tri-Y) Adapter Cable is also needed. This adaptor allows the 2010's to be separated by up to 6' from each other. A 10' extension cable is also included and can be inserted between the model 3320 G-Logger and the model 3901 (with 2010's connected to it) or between the model 3320 G-Logger and a model 2420 Triax.
|
|
DEWE-43-V packs incredible punch
The all-new DEWE-43-V is taking the data acquisition world by storm. Find out just how great this powerful and yet highly affordable system really is!
-8 universal inputs with 200 kS/s/ch max sample rate
-Simultaneous sampling and 24-bit resolution
-8 synchronous counter/encoder inputs / 24 digital TTL inputs
-2 high speed CAN bus interfaces
-Powered from 6-36 VDC
-Connects to your PC via USB 2.0 (locking connector on the DEWE-43!)
-Includes DEWESoft-SE acquisition/replay software
|
|
Portable PC-based data acquisition system with flip-up 17" tft display.
16 DAQ module slots on the front, or 32 MDAQ input channels.
ORION series A/D cards with simultaneous sampling, CAN BUS interfaces, and more. VIDEO inputs, IRIG timecode option, and GPS interface.
Powerful WindowsXP computer inside
DEWESoft data acquisition software completes your system
|
|
ADC-RACKS - this is a signal conditioning mainframe with an integrated A/D board. This A/D board can be one of several kinds, with USB or Firewire interfaces for medium and low-speed applications, or a PCI interface for high-speed applications. You can even add our GPS-SYNC option for precise time synchronization of multiple systems to a common clock or simply to each other.
Dewetron front-end systems move the computer to the outside of the box - and let you use your own notebook or desktop computer (or one of ours) for control, setup, and the actual storage of the data. Sometimes a PC-based system makes more sense than an all-in-one solution, so we offer Dewetron systems in this configuration. There are basically two kinds of PC-based systems.
|
|
LMS SCADAS, Signal Conditioning, Data Acquisition and recording for Lab and Field Testing
With a wide and diverse product line, there is certain to be a LMS SCADAS data acquisition and signal conditioning system to match your exact requirements - from compact mobile units, autonomous smart recorders up to high-channel-count laboratory systems. With a large variety of supported transducers and signal conditioning, the LMS SCADAS systems are optimally tuned to meet the specific needs of noise, vibration, acoustic and durability testing. On top of that, with the LMS SCADAS systems’ focus on versatility, you can be sure of an excellent return on investment. It is completely feasible to use your lab system as a mobile front-end or even a stand-alone recorder in the field. Perhaps you need a single system solution for acoustic tests and for durability data acquisition in tough conditions? Whatever its purpose, there is a LMS SCADAS system made to match your testing needs.
|
|
|
Yokogawa's PC-based data acquisition system DAQMASTERs is delivering unparalleled performance. When combined with Yokogawa's proprietary PC software, the MX100's high speed, multi channel capability, and high withstand voltage offers the ultimate in measurement power.
|
|
The DAQ750 is a termination assembly that mounts directly to the DAQ portable series of signal conditioning systems and provides terminals to receive field wiring.
Each terminal accepts a single solid or stranded conductor in wire sizes AWG 26 to AWG 12. An isothermal reference is provided that may be used when terminating thermocouples to the assemblies.
|
|
|
|
|
|
Data monitoring DAS-8000
Acquisition and display of analog and logic variables for monitoring, surveillance and sequential display of measurements, with assigned alarms and remote control of logic actions in industrial processes.
Acquisition of 8 analog variables, 8 logic variables and 8 alarm logic outputs
Local Display of reading, channel nº, alarms and other parameters
Remote Control of logic actuators
Alarm-loops associated to the analog inputs
2 counters with reset, inhibition and preset functions
Inputs and ranges configurable in Pt 100, 0...4-20, mA, mV and V indistinctly
Linearization of thermocouples (E, J, K, T, S, R, B and N)
Linearization of user curve
Direct output to printer (RS-232)
Communication bus selectable RS-485 / RS-232
Operating in stand alone mode or in multidrop network up to 255 devices (standard Modbus protocol)
Configurable from PC or locally by front keypad in programming and monitoring
DIN Rail mounting or on rear panel or on wall
Display Detachable up to 2 m from main body
|
|
|
Data Acquisition is a completely redesigned data acquisition system combining GE's hardware capability with the new Sxp software platform. The new system consists of the 408 Dynamic Signal Processing instrument (DSPi) and ADRE® Sxp software. Highly portable, ADRE® Sxp is designed to meet the changing needs of various fleet asset management programs as well as all other industries where speed and flexibility in data collection are a must. ADRE® Sxp can operate stand-alone in test stands, and with its remote viewing and operating capabilities, offers users large potential savings on unnecessary travel expenses.
|
|
|
|
|
|
With more than 100,000 MGCplus channels in different applications worldwide, HBM's MGCplus system has achieved acceptance as a measurement standard. The wide spectrum of supported transducers, fieldbus connections and standard PC interfaces are some of the features which indicate that it is a truly integrated measurement device.
The MGCplus is today the data acquisition (DAQ) system of choice for almost all industrial, laboratory and R&D measurement applications in:
Test rigs
Calibration
Manufacturing
Weighing
Experimental stress analysis
Mobile data acquisition.
Main features and benefits:
Modular, computer-controllable amplifier system
Self-supporting plug-in amplifier units available for all common measurement quantities, e.g. SG transducers, inductive transducers, DC voltages, thermocouples, torque transducers
Various computer interfaces (RS232, RS485 and IEEE488), also available with standard protocols such as 3964R, ModBus and Ethernet
Parallel, synchronised data acquisition from max. 16 channels per device, 10,000 samples per sec/channel
Operation possible via control panel display or PC in conjunction with relevant software.
|
|
|
|
|
|
Imatek data acquisition systems are based around the C3008 controller and a PC running the ImpAcqt software. This is a general-purpose system for analysing the results of high-speed tests, such as impact testing and high-speed servo-hydraulic testing.
Key features:
Analogue channels: 4 as standard, 16 optional. All channels sampled simultaneously at the maximum sample rate
Digital channel: Quadrature encoded input in addition to analogue channels
Resolution: 16-bit (1 in 65536), no missing codes
Sample rate: 3,000,000 samples per second (maximum)
Sample depth: Up to 50,000 samples per channel
Gain: Input range ±10V, ±5V, ±2.5V, ±1.25V software selectable
Input mode: Differential, bi-polar or uni-polar, selected per channel.
Bandwidth: 1.5MHz
Signal to noise: <2 bit system noise
Gain error: ±0.1% maximum
Trigger: By velocity-measurement laser, external TTL trigger in, analogue channels (trigger level configurable). Rising/falling edge. 0% to 100% pre-triggering. Trigger output.
Timing: Velocity measurement by time-of-flight, 20ns resolution
Digital input: 26 channel opto-isolated input
Digital output: 18 channel NPN output, short-circuit and over-current protected.
High speed camera: Camera trigger output and lighting controller output to interface to high-speed video systems. See separate data sheet for details.
|
|
|
|
|
|
The Gage Box remote Data Acquisition System is a shop floor proof, expandable gauging system.
The system is composed of dedicated, stackable modules to manage analog sensors and digital Input/Output signals.
All modules are daisy-chained together and exchange measurement data, programming data and I/O signals with the E9066™ Industrial PC through a simple RS232 serial link. Any commercial PC can also be used.
The system allows direct interfacing and data collection from TESTAR probes or measuring cells, and from a wide variety of third party sensors.
All data acquisition functions (sampling, signal conditioning, A/D conversion) are performed locally (freeing the computer from any overhead or operating system latency), and then conveniently transferred to the system’s companion Industrial PC, the E9066s™, or to any PC-compatible data collector, via a standard RS232 port.
A high speed, serial communication link with a dedicated ISA-compatible interface card is also available, for process-intensive or critical measurement applications.
|
|
Delphin's modular MinMessage device enables the acquisition of any physical value (e.g. temperature, pressure, flow). The device includes 1 or 2 I/O modules which can be combined in any way according to requirements.
Message devices are being used in a range of applications: in laboratories, the comprehensive monitoring of containers, measurement data acquisition at engine testing benches etc..
|
|
|
|
|
|
Recorders, Paperless
Paperless recorders offer improvements over traditional chart recorders, including reduced operating costs and improved reliability. Paperless recorders can be connected to the LAN allowing access to data by multiple departments.
eZtrend QXe
The eZtrend QXe is a cost-effective, general purpose DIN size electronic data recorder that easily replaces 100mm paper strip chart recorders, providing the ability to capture continuous and batch data electronically.
Minitrend QX
The Minitrend QX Electronic Data Recorder represents the latest in recording technology by providing the ability to capture continuous and batch data electronically, making the analysis of the data easier, faster and more reliable.
MultitrendPlus SX
The Multitrend SX reliably records electronic data in a secure format from directly connected sensors or transmitters that can be used for documentation of process conditions and process improvement.
TrendManager Software
TrendManager Pro Software Suite is a PC software package designed to complement Honeywell paperless recorders.
|
|
Paperless recorders offer improvements over traditional chart recorders, including reduced operating costs and improved reliability. Paperless recorders can be connected to the LAN allowing access to data by multiple departments.
eZtrend QXe
The eZtrend QXe is a cost-effective, general purpose DIN size electronic data recorder that easily replaces 100mm paper strip chart recorders, providing the ability to capture continuous and batch data electronically.
Minitrend QX
The Minitrend QX Electronic Data Recorder represents the latest in recording technology by providing the ability to capture continuous and batch data electronically, making the analysis of the data easier, faster and more reliable.
MultitrendPlus SX
The Multitrend SX reliably records electronic data in a secure format from directly connected sensors or transmitters that can be used for documentation of process conditions and process improvement.
|
|
Astro-Med has been designing and manufacturing Dash series recorders for over two decades. From yesterday's strip chart-based recorders to today's data acquisition based recorders, the Dash series name has been synonymous with portable, rugged, maintenance and troubleshooting tools.
Dash 18X - The Dash 18X is a portable, 18-channel data acquisition recorder designed for a wide variety of high channel count applications. It has universal inputs for voltage, thermocouple and bridge signals. A large real-time waveform display, internal 73 GByte hard drive for capturing data, integral PC connectivity and optional chart recorder give you data in any format that you want. Audio and video snapshot recording let's you capture all aspects of your test.
|
|
Automatically creates test certificates, A4-format
Test graph on your own PC or laptop
Up to 4 input channels for pressure or temperature
Suitable for all types of pressure test units
Calibrated system, ready-for-use
User-friendly software including manual on CD ROM
WE ARE LOOKING FOR A DISTRIBUTOR IN ITALY. Please contact us if you are interested!
|
|
|
|
|
|
MEASURpoint™ is an ultra-accurate instrument that allows any combination of temperature and voltage to be measured with a single software solution. Up to 48 configurable channels allow the ultimate flexibility with voltage, thermocouple, and RTD inputs. MEASURpoint incorporates ISO-Channel™ technology to eliminate any common mode noise and ground loop problem in any environmental conditions.
Key Features:
Dedicated 24-bit, Delta Sigma A/D converter per channel operating in parallel
Configure up to 48 channels in groups of 8 channels per board
ISO-Channel™ protection eliminates noise and ground loops
1000V galvanic isolation channel to channel and to the host computer to protect signal integrity
DC/DC converter per channel maximizes isolation
10Hz throughput rate on each channel simultaneously or 480Hz for 48 channels
Ethernet (LXI Class C compliant) or USB operation
Compact, rugged 2U half rack enclosure (3.5" H x 8.25" W x 8.25" L)
Dedicated CJC (cold junction compensation) for each thermocouple channel
B, E, J, K, N, R, S, and T type thermocouples supported
Dedicated reference current source for each RTD channel
Platinum RTD types supported: Pt100, Pt500, Pt1000
3 software selectable input ranges on voltage boards: ±10V, ±100V, ±400V
Includes ready-to-measure Measurement Application
|
|
The DT9841 is a real-time USB Data Acquisition Module with an embedded DSP for high-accuracy sound and vibration testing. It features full data acquisition capability: eight 24-bit analog inputs, two 24-bit analog outputs, 24 lines of digital I/O, and three 32-bit counter timers.
Key Features:
* Delta-Sigma A/D and D/A converters for high-accuracy measurements at up to 800 kS/s (aggregate)
* Real-time control with embedded TMS320C6713, 300 MHz DSP for stand-alone or system operation
* Software programmable DSP
* Two packaging configurations: Sleek Box version for easy connections or board-level version for OEM-embedded applications
* Flexible memory configuration: 128 MB SDRAM and 2 MB Flash for autonomous operation
* Scalable design for connecting up to 8 modules for high-channel count applications
* High-speed host USB 2.0 host interface (480 Mbits/seconds)
* 500 V Isolation for maximizing signal integrity
|
|
Eagle is a new data acquisition system designed to provide a world-class rack-mounted solution for medium channel-count dynamic data recording, and real-time monitoring requirements. Eagle is particularly suited to applications close to the test article with a rugged 19" rack-mount chassis.
Eagle may be operated in a standalone mode as a mobile acquisition system (with screen & keyboard fitted) or as part of a larger remotely-controlled acquisition system.
Eagle features 32 analogue input channels.
- 24-bit delta-sigma A-to-D converter per channel
- Synchronous sample rates 5-200 kHz (up to 80kHz bandwidth)
- All inputs are configurable for AC, DC, ICP or Tachometer signals
- Each channel includes selectable ranges up to +/-1, 2, 5 or 10 volts
- Synclink interface to allow multi-unit operation
- < 5kg weight
|
|
Topo is a new data acquisition front-end system designed to provide a world-class ultra-portable solution for medium channel-count dynamic data recording.
Topo features 32 (standard) analogue input channels.
- 16 bit delta sigma A to D converter per channel
- Synchronous sample rates 5-200kHz (effective 80kHz bandwidth)
- +/-10 volt channel inputs
- Synclink interface to allow multi-unit operation
- < 1kg weight
|
|
USB 1MS/s, 16-bit multifunction module with BNC inputs
- 1 MS/s 16-bit A/D converter
- 16 BNC differential analog inputs, with 7 programmable input ranges from ±100 mV to ±10 V full scale
- Over-sampling mode, including line-cycle rejection for low-level voltage measurements, even in the presence of AC power line noise
- 1 MS/s, 16-bit analog outputs
- 16 digital I/O
- 4 counter inputs capable of measuring frequency, period, pulse width, or quadrature encoders up to 20 MHz
- 2 timer outputs
|
|
|
|
