Bar feeder - All industrial manufacturers

Spartanics automated handling systems are guaranteed to boost your bottom line by minimizing expensive manual labor, and often eliminating it altogether. Load up to 20 strips per minute of material directly...

Monoblock hydraulic distributor 350 bar HYDROCONTROL

Hydrocontrol's monoblock valve range is one of the widest and most complete in the whole industry. New projects, innovations and technical improvement of...

3

Peristaltic metering pump 1.7 - 8.6 bar | XP, XPV series Pulsafeeder

The CHEM-TECH Series XP with peristaltic technology delivers worry-free dosing in a modern design. Each and every component of the Series XP is designed and manufactured for optimum reliability...

35

Chemical metering pump 10.3 - 20.7 bar LMI Milton Roy

Introducing the ROYTRONIC Series A metering pump offering a robust design, control options and improved electro-magnetics to meet all flow / pressure ratings. The pumps are available for applications up to 250 psi with capacities...

2

Solenoid-driven diaphragm metering pump 0.2 - 17 l/h, max. 16 bar | MAGDOS LT series Lutz - Jesco

MAGDOS LT is a solenoid-driven diaphragm pump with a state of the art microprocessor-controlled electronic. The electronic provides power to the pump drive depending on the system´s pressure requirements thus reducing power...

14

Piston metering pump max. 250 bar | A series DOSEURO s.r.l.

"A" type piston metering pumps are suitable for use when the liquid to dose is non abrasive solution and when high pressure is required. The gearbox...

10

Progressive cavity metering pump max. 1.0 m³/h, max. 12 bar | DC series SYNO ENGINEERS

Designed for use where accurate, low flow pumps are required for either intermittent or continuous dosing, the compact DC series pumps have high...

Rotary valve for pneumatic conveying max. 1 bar | EZS series J. Engelsmann AG

Description Suitable for volumetric feeding and discharging of powdery, granular and coarse-grained bulk goods. Furthermore the rotary valve can be used as a metering device for drawing off products from silos, bins, containers etc. and for feeding downstream...

Rotary valve for pneumatic conveying (round flange) max. 280 m³/h, max. 3.5 bar | HDS series Zeppelin Silos & Systems

Application The HDS rotary feeders are mainly used for the discharge (dosing) of pellets and powders from silos. Furthermore they are used as a feeding device in pneumatic dense phase and dilute phase conveying systems with a differential pressure up to 3.5 bar (g). Design characteristics Optimized inlet and outlet cross section for gentle product feeding combined...

8

Diaphragm metering pump max. 1 140 l/h, max. 10 bar | DMD series Omel Bombas e Compressores

The DMD metering pumps are a compact series of pumps, that consists in a mechanically operated elastomer diaphragm that works in a hermetic head...

Motor-driven diaphragm metering pump 1200 l/h, 12 bar Finder Pompe

Motor-driven dosing pumps with mechanically actuated diaphragms. The working principle of these pumps is based on a variable eccentric design and stroke...

5

Proportional directional hydraulic distributor 420 bar, 120 l/min | APV-16 AMCA Hydraulic Fluid Power

Features, * Modular assembly system, suitable for 'Build Program1. * Max, operating pressure 420 bar, * Different spooltypes up to 120 l/min. in combination...

3

Rotary valve for pneumatic conveying (round flange) max. 700 m³/h, max. 3.5 bar | CFH series Zeppelin Reimelt GmbH

The CFH-type rotary feeders are mainly used for the discharge (dosing) of pellets and powders from silos. They also serve as feeding devices in pneumatic dilute phase conveying systems with a differential pressure up to 3.5 bar (g). Design characteristics Optimized inlet and...

8

Solenoid-driven diaphragm metering pump max. 80 l/h, max. 10 bar | BT, BTB series Etatron D.S.

The BT and BTB MA series are microprocessor-based manual pumps suitable for wall or foot mounted installations. They carry with them all the advantages of digital electronics - reliability,...

5

Tube and cartridge dispensing gun max. 10 bar Schneider Druckluft GmbH

Fatigue-free work due to low weight Neat and clean work with the material stop function Accurate metering with stepless regulation of material quantity Quick,...

Warm melt supply system for adhesives max. 80 bar, max. 200 l | ML-PS200 series Meler

PS200 Drum melter by meler allows connection up to four hoses and its drum fast change system gives a useful, simple and practical tool for the application of hot-melts supplied in 200L drums. This machine...

3

Dispenser head 1 - 4 bar ODL

Dispense heads Internal, round flat, triangular flat, combi type dispense heads General description O.D.L. dispense heads can function with all the fittings of the same system. They are specially designed and constructed to keep both size and weight as compact as possible, while...

Adhesive dispensing unit 7 - 68 bar | APEX™ ITW Dynatec

ITW Dynatec’s APEX High Speed Slot Die Applicator is an air-operated hot melt adhesive applicator assembly with an optional filter manifold. The applicator is used with intermittent pressure...

Lubricant feeding unit 845 dm³/min, 8 bar | GP-R65/500FL-Z Rickmeier GmbH

RICKMEIER develops, designs and produces oil supply systems using state of the art 3D-CAD-software. Quality starts with the consulting and projecting provided by experienced engineers from the office and field service staff working...

5