|
|
PROFIBUS :
Link devices
Siemens offers PROFIBUS link devices for different tasks:
Communication between two PROFIBUS DP masters
Connecting RS232C devices to PROFIBUS DP
Connecting PROFIBUS devices through a wireless network
|
|
The Serial RapidIO PCI Bridge provides the capability to bridge between Serial RapidIO and PCI. It is part of a family of bridge devices aimed at applications wishing to take advantage of the Serial RapidIO interconnect.
Serial RapidIO is a switched data communication standard developed for the interconnection of devices on the same circuit board or between circuit boards across a backplane at rates in excess of 10Gbps. It has been developed as a more cost-effective, standards based replacement for expensive proprietary busses in high-performance embedded systems, such as networking and communications equipment and enterprise storage.
|
|
|
Pericom has designed these high-performance devices for next generation markets that include Switches and Routers, Servers, HBAs, Data Storage Systems, PCs, Notebooks, Telecom Equipment, Multi-Function Printers, Test Equipment, Embedded Systems, and Data Acquisition Systems.
|
|
|
|
|
|
PCI & PCI Express Connectivity
Peripheral Component Interconnect (PCI) is an interconnection system between a microprocessor and attached devices. PCI devices are found in two forms. One, in which the PCI IC is incorporated directly onto a motherboard. This is also known as a planar device. Second, is when the IC is integrated onto an PCI device card that will attach to a PCI slot connected to a motherboard.
MosChip's PCI bridge chips provide OEMs low cost solutions for developing products that bring single and multi-channel Parallel, UART and Serial devices to the market place.
PCI Express (PCI-e) is an interconnection system, based on the PCI standard, between a microprocessor and attached devices for high-speed operation. The electrical and mechanical interfaces of PCI-e are not compatible with the PCI bus interface. This bus also provides a high speed 2.5GBs data rate.
Our family of PCI-e bridge chips will integrate Parallel, Serial and USB 2.0 /3.0 interfaces into scalable devices that OEM designers can bring to market in record times with low overall costs to market
|
|
|
TI's PCI bridges provide a high performance connection path between two PCI buses or between a PCI bus and DSP host port. The PCI bridge functions as the traffic coordinator allowing bridge transactions to occur concurrently on both.
|
|
| ... products without technical information |
| |
1.0 A Glass Passivated Bridge High Efficient Rectifiers
Features
- Glass passivated junction
- Ideal for printed circuit board
- Reliable low cost construction utilizing molded plastic technique
- High temperature soldering guaranteed: 260C / 10 seconds / 0.375” ( 9.5mm ) lead length at 5 lbs., ( 2.3 kg ) tension
- Small size, simple installation Leads solderable per MIL-STD-202, Method 208
- High surge current capability
Maximum Ratings and Electrical Charcteristics:
- Rating at 25 C ambient temperature unless otherwise specified.
- Single phase, half wave, 60 Hz, resistive or inductive load.
- For capacitive load, derate current by 20%
|
|
| ... products without technical information |
| |
Tenova TAKRAF has been building conveyor bridges since 1924.The mobile conveyor bridges in the German Lignite mines transport the material from the excavators directly crossing the open pit onto the dump site. Special operational conditions there allow capacities up to 29.000 m³/h from three Bucket Chain Excavators, a span length (distance between the supports) of 270 m and a dumping height of 74 m. The 13400 t Conveyor Bridge travels on rails. One support stands on the excavation site, the other one on the dumping side. The extraction of the lignite takes place between the supports.
Another application of Tenova TAKRAF conveyor bridges are Dumping the Heap Leach Systems. These conveyor bridges are also fully mobile and transfer the material from reclaimers, overland conveyors or connecting conveyors to the downstream conveyors, Mobile Transfer Conveyors or Stackers (Spreaders) as seen in Gaby/Chile or Toquepala/Peru.
|
|
Tenova TAKRAF developed and supplied Slope Conveyor Bridges as a mobile link between a Bucket Wheel/Chain Excavator and a shiftable conveyor installed on a bench with a higher level. The advantages of Slope Conveyor Bridges are on the one hand the location of the face conveyor already on the next higher level and on the other hand the elimination of a ramp conveyor. The slope will be bridged by the Conveyor Bridge without any earth work.
Tenova TAKRAF's Slope Conveyor Bridges in Kazakhstan have a capacity of 5500 m³/h and can handle height differences up to 28 m.
|
|
Tenova TAKRAF has been building conveyor bridges since 1924.The mobile conveyor bridges in the German Lignite mines transport the material from the excavators directly crossing the open pit onto the dump site. Special operational conditions there allow capacities up to 29.000 m³/h from three Bucket Chain Excavators, a span length (distance between the supports) of 270 m and a dumping height of 74 m. The 13400 t Conveyor Bridge travels on rails. One support stands on the excavation site, the other one on the dumping side. The extraction of the lignite takes place between the supports.
Another application of Tenova TAKRAF conveyor bridges are Dumping the Heap Leach Systems. These conveyor bridges are also fully mobile and transfer the material from reclaimers, overland conveyors or connecting conveyors to the downstream conveyors, Mobile Transfer Conveyors or Stackers (Spreaders) as seen in Gaby/Chile or Toquepala/Peru.
|
|
Tenova TAKRAF developed and supplied Slope Conveyor Bridges as a mobile link between a Bucket Wheel/Chain Excavator and a shiftable conveyor installed on a bench with a higher level. The advantages of Slope Conveyor Bridges are on the one hand the location of the face conveyor already on the next higher level and on the other hand the elimination of a ramp conveyor. The slope will be bridged by the Conveyor Bridge without any earth work.
Tenova TAKRAF's Slope Conveyor Bridges in Kazakhstan have a capacity of 5500 m³/h and can handle height differences up to 28 m.
|
|
PROFIBUS :
Link devices
Siemens offers PROFIBUS link devices for different tasks:
Communication between two PROFIBUS DP masters
Connecting RS232C devices to PROFIBUS DP
Connecting PROFIBUS devices through a wireless network
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
|
|
see the results for the following category : 
