Calibration pumps

43 companies | 132 industrial products

Companies per page

Martel Electronics 100 psi | MECP100
Pressure calibration hand pump 100 psi | MECP100 Martel Electronics

Ease of use Fine adjust vernier Fine release bleed...

Martel Electronics 600 psi | MECP500
Pressure calibration hand pump 600 psi | MECP500 Martel Electronics

Pressure Pump Features: Ease of use Fine adjust vernier Fine release bleed valve Vacuum to 600 psi...

Martel Electronics 10 000 psi | MECP10000
Pressure calibration hand pump 10 000 psi | MECP10000 Martel Electronics

Hydraulic Calibration Pump MECP10000 Hydraulic Pump High Pressure...

Martel Electronics 2 000 psi | MECP 2000
Pressure calibration hand pump 2 000 psi | MECP 2000 Martel Electronics

High pressure calibration where hydraulic pumps are not preferable Eliminate the need for nitrogen cylinders or use as back-up to nitrogen Complete flow computer calibration solution for custody...

1 products AOIP
AOIP 850 mbar | LTP1
Pressure calibration hand pump 850 mbar | LTP1 AOIP

Integral fine control / pressure release valve Live volume thermally isolated Adjustable...

KSB S.A.S. - France max. 102 m, max. 660 m³/h | Etanorm G/M/B/S/C
Standard single-stage centrifugal pump max. 102 m, max. 660 m³/h | Etanorm G/M/B/S/C KSB S.A.S. - France

Horizontal, long-coupled, single-stage volute casing pump with ratings and main dimensions to EN 733 in back pull-out design, with replaceable...

new video KSB S.A.S. - France max. 160 m, max. 780 m³/h | Etanorm
Standard single-stage centrifugal pump max. 160 m, max. 780 m³/h | Etanorm KSB S.A.S. - France

Horizontal, long-coupled, single-stage volute casing pump (to EN 733) in back pull-out design with replaceable shaft sleeves/shaft protecting...

3 products Salmson
Salmson max. 320 m³/h | PBS series
Standard monobloc centrifugal pump max. 320 m³/h | PBS series Salmson

Heating water according to VDI2035 or cold water Chilled water circuit or glycol water circuit up to 40 % glycol...

Salmson max. 600 m³/h | NFCH series
Standard monobloc centrifugal pump max. 600 m³/h | NFCH series Salmson

Pump for mineral and synthetic thermal fluids up to 350°C. Designed for use in the following fields: Energy production Environmental engineering General industry, plastics, paint,...

Salmson max. 450 m³/h, EN 733 | NOS series
Standard single-stage centrifugal pump max. 450 m³/h, EN 733 | NOS series Salmson

Pump for clear or slightly turbid fluids with no solid particles. Designed for use in the following fields: Heating and air conditioning General industry, plastics, paint, textiles,...

12 products SAER
SAER max. 1900 m³/h, 50 Hz | NCB4P/NCBZ4P series
Standard monobloc centrifugal pump max. 1900 m³/h, 50 Hz | NCB4P/NCBZ4P series SAER

APPLICATIONS Recircling plants, heating, air conditioning, heat recovery, plants...

SAER max. 600 m³/h, 50 Hz | NCB/NCBZ series
Standard monobloc centrifugal pump max. 600 m³/h, 50 Hz | NCB/NCBZ series SAER

APPLICATIONS Recircling plants, heating, air conditioning, heat recovery, plants...

SAER max. 255 m³/h, 50 Hz | MG1/MG2 series
Standard monobloc centrifugal pump max. 255 m³/h, 50 Hz | MG1/MG2 series SAER

APPLICATIONS Recircling plants, heating, air conditioning, heat recovery, plants...

SAER max. 400 m³/h, 50 Hz | IR4P series
Standard monobloc centrifugal pump max. 400 m³/h, 50 Hz | IR4P series SAER

APPLICATIONS Recircling plants, heating, air conditioning, heat recovery, plants...

SAER max. 275 m³/h, 50 Hz | IR series
Standard monobloc centrifugal pump max. 275 m³/h, 50 Hz | IR series SAER

APPLICATIONS Recircling plants, heating, air conditioning, heat recovery, plants...

SAER max. 1500 m³/h, 60 Hz | 6NCBK6P/6NCBKZ6P series
Standard monobloc centrifugal pump max. 1500 m³/h, 60 Hz | 6NCBK6P/6NCBKZ6P series SAER

APPLICATIONS Recircling plants, heating, air conditioning, heat recovery,...

1 products Osip
Osip NC series
Standard monobloc centrifugal pump NC series Osip

Monobloc horizontal centrifugal pumps, built to EN-733 standards;...

3 products DAB
DAB 1 - 105 m³/h, max. 16 bar, IP 55 | NKM-G / NKP-G
Standard single-stage centrifugal pump 1 - 105 m³/h, max. 16 bar, IP 55 | NKM-G / NKP-G DAB

Enbloc centrifugal electric pumps with integral shaft designed for a wide range of applications, such as: Water supply. Circulation of hot water for central heating. Circulation of cold water for air...

DAB 1 - 500 m³/h, max. 16 bar | KDN
Standard single-stage centrifugal pump 1 - 500 m³/h, max. 16 bar | KDN DAB

Enbloc, centrifugal electric pumps with coupling designed for a wide range of applications such as: Supplying water. The circulation of hot water for central heating. The circulation of cold water...

DAB max. 2 200 m³/h, max. 16 bar, IP 55 | KDN OVERSIZE
Standard single-stage centrifugal pump max. 2 200 m³/h, max. 16 bar, IP 55 | KDN OVERSIZE DAB

Single-stage centrifugal pump body with axial suction port, radial discharge port and horizontal shaft components. The KDN pumps have dimensions and nominal performances according to EN 733 (10 bar) but...

2 products SPP
SPP max. 400 m³/h, DIN 24255 | Eurostream series
Standard monobloc centrifugal pump max. 400 m³/h, DIN 24255 | Eurostream series SPP

The Eurostream range of pumps provides close coupled versions of the SPP Pumps Unistream which is designed based on the DIN 24255 standard. The range covers 25 pump sizes from 32mm to 125mm discharge...

SPP max. 60l/s, VDMA | Instream series
Standard monobloc centrifugal pump max. 60l/s, VDMA | Instream series SPP

The Instream is designed to provide a high level of component interchangeability with the Unistream and Eurostream ranges; providing extra benefits including simplification of design, savings in time...

1 products FRIATEC
FRIATEC DN 32 - 80, max. 200 m³/h | CPRF
Standard plastic centrifugal pump DN 32 - 80, max. 200 m³/h | CPRF FRIATEC

Material Plastic Design Free Flow Pumps Size DN 32 - DN 80 Delivery rate Qmax. = 200 m3/h Delivery head Hmax. = 100 m Temperature -50 °C bis +130 °C Application Aggressive liquids laden with...

1 products VANTON
VANTON 1 150 gpm, ANSI B73.1 | CGA series
Standard plastic centrifugal pump 1 150 gpm, ANSI B73.1 | CGA series VANTON

CHEM-GARD® CGA thermoplastic pumps with end suction, centerline discharge and back pullout construction, combine the award winning wide-open power frame of Vanton’s CHEM-GARD® line of thermoplastic...

video EBARA PUMPS EUROPE max. 10 bar, 3 - 138 m³/h, EN 733 | 3 (3M-3S-3P) series
Stainless steel standard centrifugal pump max. 10 bar, 3 - 138 m³/h, EN 733 | 3 (3M-3S-3P) series EBARA PUMPS EUROPE

Standardised centrifugal electric pumps built in stainless steel AISI 304 (3 SERIES) and AISI...

1 products IWAKI
IWAKI max. 5.0 m³/min, max. 98 m | MDW series
Standard magnetic drive centrifugal pump max. 5.0 m³/min, max. 98 m | MDW series IWAKI

High discharge capacity, High head and high efficiency The heavy-duty MDW is capable of a maximum discharge capacity of 300m3/hr and max. discharge head of 98m, enabling applications in previously unexplored...

1 products Aspen Pumps
Aspen Pumps 6.25 l/h
Standard peristaltic pump 6.25 l/h Aspen Pumps

The Standard peristaltic pump is triggered by the hard-wired cooling signal from the air conditioning unit. The Standard is designed to fit in ceiling voids and lift the condensate water from wall mounted...

Apollo - Gößnitz GmbH 1800 m³/h, 25 bar | KRC
Standard single-stage centrifugal pump 1800 m³/h, 25 bar | KRC Apollo - Gößnitz GmbH

According to chemical standard ISO 2858 organic and non-organic chemistry,...

Apollo - Gößnitz GmbH 400 m³/h, 10 bar | KRD
Standard single-stage centrifugal pump 400 m³/h, 10 bar | KRD Apollo - Gößnitz GmbH

Single-stage, normal-priming centrifugal pump with open or closed impeller, non-clog impeller, ducted impeller...

Apollo - Gößnitz GmbH 200 m³/h, 25 bar | GLA
Standard multi-stage high-pressure centrifugal pump 200 m³/h, 25 bar | GLA Apollo - Gößnitz GmbH

Multistage, horizontal centrifugal pumps self-priming pump, i. e. a high-grade...

Apollo - Gößnitz GmbH 500 m³/h, 25 bar | GLZ/C
Standard multi-stage high-pressure centrifugal pump 500 m³/h, 25 bar | GLZ/C Apollo - Gößnitz GmbH

Multistage, horizontal centrifugal pumps sectional casing version...

Apollo - Gößnitz GmbH 600 m³/h, 25 bar | GLKV
Standard multi-stage high-pressure centrifugal pump 600 m³/h, 25 bar | GLKV Apollo - Gößnitz GmbH

Multistage, vertical can-type pump NPSH impeller – single-flow or double-flow...

Apollo - Gößnitz GmbH 500 m³/h, 25 bar | GLV
Standard multi-stage high-pressure centrifugal pump 500 m³/h, 25 bar | GLV Apollo - Gößnitz GmbH

Multistage, vertical tank installation pump of sectional casing design closed...

Swedenborg Ingeniörsfirma, AB GF max. 1 700 m³/h, EN 733 | SNT, SNK series
Standard single-stage centrifugal pump max. 1 700 m³/h, EN 733 | SNT, SNK series Swedenborg Ingeniörsfirma, AB GF

AREAS OF USE The pump is an all-round pump for most fluids. The pump can be equipped with different types of mech.seals depending on the medium. TECHNICAL DESCRIPTION The pump complies with EN 733 (DIN 24255). Size...

Swedenborg Ingeniörsfirma, AB GF max. 400 m³/h, 600 lbs | SKMV-H series
Standard multi-stage high-pressure centrifugal pump max. 400 m³/h, 600 lbs | SKMV-H series Swedenborg Ingeniörsfirma, AB GF

AREAS OF USE Can be used where extreme heights are required with a relatively large flow, for example: * Increases in pressure (Booster) * Hot water * Chemicals *...

Rütschi Fluid AG max. 1 380 m³/h
Standard single-stage centrifugal pump max. 1 380 m³/h Rütschi Fluid AG

Horizontal single stage volute casing pumps NA-NE type, Closed impeller, Base...

1 products Finder Pompe
Finder Pompe 450 m3/h | HCV  series
Standard vertical single-stage centrifugal pump 450 m3/h | HCV series Finder Pompe

Vertical single stage centrifugal pumps derived from ISO 2858/ DIN 24256 Norms. The casing is always immerged in the liquid while a discharge pipe brings the discharge branch...

5 products SOMEFLU
SOMEFLU max. 1500 m³/h | NP, NP-S series
Standard plastic centrifugal pump max. 1500 m³/h | NP, NP-S series SOMEFLU

Main applications Steel, Chemical, Mining, Environment, Odor control, Gas scrubbers, Aquarium, Sea water... Construction Horizontal process non-metallic pump equipped with mechanical seal Pumps...

SOMEFLU max. 190 m³/h | NP-V series
Standard plastic centrifugal pump max. 190 m³/h | NP-V series SOMEFLU

Main applications Steel, Chemical, Mining, Environment Construction Horizontal process non-metallic pump equipped with mechanical seal Fully suitable for corrosive liquids or fluids with thick particles NP...

SOMEFLU max. 100 m³/h | ECO-N series
Standard plastic centrifugal pump max. 100 m³/h | ECO-N series SOMEFLU

The hydraulic part is fully manufactured out of thick walled plastic blocks Raw...

SOMEFLU max. 100 m³/h | NP-M series
Standard magnetic drive centrifugal pump max. 100 m³/h | NP-M series SOMEFLU

Design according to NFE 44121 - DIN 24256 - ISO 2858 - ISO 5199 similar NP series The...

SOMEFLU max. 300 m³/h | NI series
Stainless steel standard centrifugal pump max. 300 m³/h | NI series SOMEFLU

Design according to NFE 44121 - DIN 24256 - ISO 2858 -...

1 products Ebsray
Ebsray max. 250 l/s, max. 1 600 kPa | ISO series
Stainless steel standard centrifugal pump max. 250 l/s, max. 1 600 kPa | ISO series Ebsray

ISO Ebsray ’ISO’ Centrifugal Pumps The ’ISO’ pump range complies to the International standard ISO 2858 assuring dimensional interchangeability with other brand...

1 2 3
Filter by :
Refine the search
Calibration pumps
Extend the search
Search by manufacturer
Search by catalog
Associated Terms

standards pumps, standards pumping, calibrating pumps, references pumps, references pumping

With DirectIndustry you can find a nearby distributor, contact a manufacturer for an estimate or a price, or examine product characteristics and specifications.