This innovative air jet mill is capable of fine grinding all kinds of dry products with virtually no contamination.
Through this specialized milling concept, ...
The compact, universally applicable laboratory circulation mills of the MiniSeries impress with easy handling and the use of small quantities from 0.25 to 0.5 l for product sizes down to the nanometer range. Within a short time it is possible ...
The horizontal disk mills type LME and LMK are improved, continuous working laboratory and production machines for wide variety of applications.
The disk agitator ...
Quad™ Q55 Four-Shaft Shredder Overview
The SSI Quad™ Q55 four shaft shredder employs proven low-speed, high-torque technology to efficiently process a wide range of materials and give a consistently small output. The Quad™ Q55 four shaft ...
Quad™ Q70 Four-Shaft Shredder Overview
The SSI Quad™ Q70 four shaft shredder employs proven low-speed, high-torque technology to efficiently process a wide range of materials and give a consistently small output. The Quad™ Q70 four shaft shredder ...
Quad™ Q85 Four-Shaft Shredder Overview
The SSI Quad™ Q85 four shaft shredder employs proven low-speed, high-torque technology to efficiently process a wide range of materials and give a consistently small output. The Quad™ Q85 four shaft shredder has a small ...
Applications
Neue Herbold ZM series pulverizers are designed for the pulverizing of mid-hard, brittle to high impact plastics that require the final material to be in powder form. Typical applications are PE, PVC, PC and other various types of plastics. The required pulverizer input material must be in a granulate form with a maximum size of 6-8 mm ...
The Neue Herbold Shredder Type HZR 1300/4 is especially designed for the effective pre-cutting of thick-walled, high impact pipe up to a maximum of 1200 mm diameter, 6 m in length as well as for start-up lumps.
In general the HZR is followed by a granulator for final size reduction of the material to a free flowing regrind.
The benefit of the new HZR Shredder together ...
Applications
Neue Herbold SM series granulators are specially designed for all universal types of applications. Through simple modification the SM series granulators can be used for massive start-up lumps and purgings, ...
The hammer mills are machines for the treatment of scrap. They are used for normal shredding of steel scrap and is part of the complete plant for demolition and production of raw second material. ...
Small dimension shredder with middle lower production.
Characteristics:
Mechanical transmission
Interchangeable and reversible Blades and counter-blades for a speed ...
Hydraulically or mechanically driven, MAC shredder series are successfully used for the treatment and reduction ...
Powerful Metal Shredder (MSB-55)
Strong Buidling
Powerful Shredding
Automatic Operating
Its Function:
MSB-55 is one two shaft shredder, Electrical Motor drive, with 55kw motorpower force, prefect for shredding scrap metals, steel bars, 210 liter steel drums, non-ferrous metals, carpet, PVC, PET scraps, scrap copper, scrap alu, computer, hard drive, Electronic Scraps ...
MSC-22 Four-Shafts Shredder
Designed In UK,UK Quality,UK Safety Standard
Two Shaft Shredder MSC-22 Overview
Motor Power:22kw
( 30HP)
Shredding Chamber:700mm×500mm
(27.5"×19.6")
Hopper Opening:930mm×620mm
(36.6"×24.4")
MSB-22 Unique ...
Electronic Waste Recycling Machine
We supply professional shredding line used to recycling the E-Waste From the begining to the ending, the shredding line playes its high function fro shredding your big quantity E-Waste.
Strong building ...
60 t/h - Maximo 300D/ DT - ...
SID secondary shredders: granulators
SID granulators are sturdy knive mills with a speed of up to 300 revolutions/min.
Preshredded materials are introduced and cut by the granulator to an adjustable particle size of 8 to 80 mm .
Advantages:
- Robustness : the MR 200 is suitable for ...
SID pre-shredders : hook shredders
Hook shredders are machines with one or two shafts and a hydraulic, electrical or Diesel drive
Hook shredders have ...
CAT'S shears are designed according to AGMA or DIN standards, using
the most advanced calculation and drawing systems, developed
inside our company.
We can ...
A wide range of finger bits is available for the pre-cutting phase. They are both sintered with segments ...
Thanks to its long experience in the stone field, Marmoelettromeccanica presents LIONFLEX 3500. It has been made according to the modern technologies, LIONFLEX 3500 is the most powerful angle grinder ...
Thanks to its long experience in the stone field, Marmoelettromeccanica presents LIONFLEX 2500. It has been made according to the modern technologies, LIONFLEX 2500 is the angle grinder suitable for precision cuts- ...
These tools are suitable for hard milling.
The maximum hardness of the material ...
These tools are suitable for hard milling.
The maximum hardness ...
These tools are suitable for hard milling. The maximum
hardness ...
"Tritotutto" 4-shafts industrial shredders
Tritotutto is a rotating blade grinder that has been designed for use in small to medium sized firms to reduce the volume of scrap in ...
GR series plants are granulators working with small plates, which are particularly suitable to recover scraps, except ferrous materials.
Thanks to their big versatility and cheap cost, these plants represent the fist step towards small recycling equipment to produce secondary raw material.
The main feature of granulators is represented ...
Operation and machine description of double-shafts shredder
The machine is composed by a two-shafts shredder with rotary blades and specer combs.
Once the material is into the hopper and the machine is ON, the shredder catches the material and begins to cut it grossly.
Thanks to the high cutting torque and the different conformation of ...
The new Protostar Flash is a high-performance tool for economical roughing in the 2.5D and 3D range with low cutting depth and very high feed rates. It is suitable for machining alloyed and unalloyed steels.
Extremely tough: the new Protostar Qmax with ...
The graphite electrodes for producing small and deep contours in injection moulds are becoming always more complex and more comprehensive.
The electrodes are milled from a ...
Workpiece requirements call for ever better tool surfaces. Walter Prototyp finishing cutters have special geometries that satisfy this demand. Our geometry prevents chatter marks and produces smooth milling characteristics.
The product ...
Lightweight and powerful the ultra precise Model 201SV Series "pencil" style tool is designed with a slim shaft for access ...
Constant high speed and torque under variable load.
25,000 to 65,000 RPM, 0.15 - 1.40 HP / 0.11 - 1.04 kW.
Totally oil-free system; grease-packed bearings.
Greater accuracy, faster feed rates.
accelerated production.
High peripheral speed for improved ...
