|
|
Description
Inputs
12 analog inputs
8 temperature inputs
8 (TOR) digital inputs
5 frequency inputs
1 supply input
1 CAN machine plug
1 Hand held terminal / Debug plug
Saving
Smart Media Card
Communication
Serial link RS 232
Sample frequency
Up to 500 Hz for analog, frequency and digital inputs
Up to 25 Hz for temperature inputs
Up to 1 Mbit/sec for the CAN bus
SD Canalogger set-up
Set-up with a PC using the Canalogger ExplorerTM software application or the hand held terminal with serial link
SD Canalogger protection index with its connectors
IP 65 (weather proofing)
Resistance
1m fall
Operating temperature
- 25°C to 70°C [- 65°F àto 182°F]
Mass 3.85 kg
Supply voltage 10 to 30 V
|
|
DaqBoard/2000 Series
16-Bit, 200-kHz PCI Data Acquisition Daq Boards
The DaqBoard/2000 Series sets the price/performance benchmark for high-speed, multifunction plug-and-play data acquisition for PCI bus computers. The DaqBoard/2000 Series hardware design offers all of the features normally found on significantly more expensive boards, including 16-bit, 200-kHz A/D, 100% digital calibration, bus mastering, two or four
16-bit, 100-kHz D/A converters, 40 digital I/O lines, four counters, and two timers.
Key Highlights
• Three DaqBoard/2000 Series PCI boards are available
• 16-bit, 200-kHz A/D converter
• 8 differential or 16 single-ended analog inputs (software selectable per channel)
• Expandable up to 256 analog input channels, while maintaining 200 kHz (5 µs per channel) scan rate
• Up to four boards can be installed into one PC for up to 1024 analog input channels
• 100% digital calibration
• 512 location channel/gain FIFO, capable of scanning all channels, including 256 analog expansion channels and digital/counter channels, at 5 µs per channel
• DMA bus mastering for synchronous analog I/O, digital I/O, and counter inputs
• Trigger modes include analog, digital, and software, with <5 µs latency
• Virtually infinite pre-trigger buffer
• Up to four 16-bit, 100-kHz analog outputs with infinite continuous waveform output capability
• 40 digital I/O lines, can be scanned synchronously or asynchronously with analog inputs
• Digital I/O is expandable up to 272 lines, including optional isolation and relay closure
• Four counter/pulse input channels can be scanned synchronously or asynchronously with analog inputs
• Two timer/pulse output channels |
|
Personal Daq/50 Series
USB Data Acquisition Modules
– Models /54, /55, /56
Designed for high accuracy and resolution, the 22-bit Personal Daq data acquisition systems directly measure multiple channels of voltage, thermocouples, pulse, frequency, and digital I/O. Multifunction data acquisition modules attach to PCs via Universal Serial Bus (USB 1.0 and 2.0 compatible).
Key Highlights
• Multifunction data acquisition modules attach to PCs via Universal Serial Bus (USB 1.0 & 2.0 compatible)
• Ultra low-power design requires no external power or batteries
• Can be located up to 5 meters (16.4 feet) from the PC
• High-resolution, 22-bit A/D converter offers reading rates from 1 to 80 Hz
• Built-in cold-junction compensation for direct thermocouple measurements
• Frequency/pulse, or duty-cycle measurements up to 1 MHz*
• Convenient removable screw-terminal signal connections
• 500V optical isolation from PC for safe and noise-free measurements
• Programmable inputs from ±31 mV to ±20V full scale
• Digital I/O lines with open collector output for direct drive applications*
• Expandable up to 80 channels of analog and digital I/O*
• Up to 100 Personal Daq modules can be attached to one PC using USB hubs, for a total capacity of 8,000 channels
• Digital calibration — no potentiometers or adjustments required |
|
It is dotting style of 6 - channel chart recorder, universal input, low cost, short depth 150mm, light weight 1.5 kgs and IP65 water-resistance.
FEATURES
- 6-channel dotting
- Short depth in 150mm
- Weight 1.5kg only
- Dust-proof.IP-65 Water-resistance
- Standard RS-232 Communication interface
- Universal input and range
- UL, CSA, CE approved |
|
It is the world first paperless recorder of the same size in highest resolution 640x480 pixels VGA TFT display, infrared detector, maximum 18 channels, plug & play I/O cards. It has many other unique features too, 12 soft keys for easy operation, universal input, the shortest depth 174mm, well designed portable handle, fully isolated channels, reliable and high capacity storage media CF card
FEATURES:
- 6.4"Color TFT LCD with 640X480 pixels resolution
- The Maximum Channels :
- 18 isolated analog input channels
- Plug & Play Supported I / O card, 6 Slots
- The High Flexibility :
- User configurable l / O card
- Expandable modular architecture
- Flexible screen configuration
- User-Friendly
- Soft keys coupled with interactive dialog simplify
- setup & operation procedures
- Easy - to - access function keys
- Infrared Detector:
- Shut off LCD automatically to prolong LCD life
- and save power while nobody near by
- Save Space:
- Only 174 mm (6.9") depth behind panel
- Various Display Formats:
- Vertical trend , Horizontal trend,
- Bar Graph, Numerical or mixed
- Save Data in Flash ROM,
- Compact Flash Card or PC
- Communication :
- Standard Ethernet and optional RS-232 / 422 / 485
- The Highest Accuracy
- 18 - bit A -D analog input, 15-bit D-A analog output.
- Fast Sampling Rate:
- Within 200 msec for all channels,
- Programmable Filter or Moving Average Sampling Method
- Statistics with Instant , Average , Min./ Max. Values
- Progammable Alarms and Messages available
- Portable / Bench Top Assembly Kit available
Available in low cost 6 channels |
|
Example:
-JUMO LOGOSCREEN 500 cf Entry-level Paperless Recorder with CompactFlash card and life-cycle data management (70.6510)
Measurement data presented numerically as vertical diagrams (with scaling,
numerical display, or as a bar graph)
Presentation of event traces such as "Binary inputs"
On-site availability of measurements in the FLASH memory
Measurement data are retained, even after a power interruption
Saving of data sets on the CompactFlash card
Instrument configuration through the keys or the setup program(CompactFlash card or interface)
Evaluation of archived data with PC evaluation program
Search function for history analysis
Adaptation of the memory cycles to the specific process, using normal,
time-of-day and event operation
Freely configurable inputs
Internal sampling rate 250msec for 3 or 6 analog inputs, minimum storage cycle 1sec
Counters and integrators (6 channels)
Math and logic module (6 channels)
integrated web server
The appearance of the LOGOSCREEN 500 cf is dominated by a 5-inch color display, in which the measurement data can be displayed in a vertical direction, similar to ordinary chart recorders. But unlike ordinary recorders, the LOGOSCREEN 500 cf does not need any chart paper for recording. Measurement data are stored electronically, and are available for evaluation on the spot as well as in the PC.
The integrated life-cycle data management ensures fast traceability of process data referred to specific installations.
... |
|
DaqBook/2000 Series
Ethernet-Based Portable Data Acquisition –
Models /2020, /2001, /2005
DaqBook/2000 series of Ethernet-based portable data acquisition devices can synchronously measure analog inputs, frequency inputs, and digital inputs; equipped with built-in signal I/O capability, which can be further expanded and enhanced with over 40 DBK series expansion and signal conditioning options.
Key Highlights
• Analog input, analog output, frequency input, timer output, and digital I/O; all in one compact and portable enclosure
• Built-in Ethernet connection provides continuous streaming to the PC with no data loss
• 16-bit, 200-kHz A/D converter
• Operates from -30° to +70°C
• Powerable from 10 to 30 VDC, or with included AC adapter
• Synchronous analog, digital, and frequency measurements
• Trigger modes include analog, digital, frequency, and software
• Virtually infinite pre-trigger buffer
• 4 channels of 16-bit, 100-kHz analog output (models /2001 and /2020)
• DaqBook/2020 offers convenient front panel connectors for thermocouple, voltage and frequency measurements all in one box
• DaqBooks attach to over 40 DBK signal conditioning options to assemble a low-cost system, customized to your particular application |
|
ShockWatch Impact & Environmental Recorders help monitor and record impact and shock vibration to your equipment, structures, and storage environments — ensuring protection from costly damage. Additionally, they provide an ongoing record of the environmental conditions of the product, equipment, or structure being monitored.
They provide ongoing monitoring of the intensity and duration of shock and vibration to large stationary or moving equipment, structures, and products. Tri-axial piezo-electric accelerometer technology is used to record impact direction, amplitude, and duration. Optional sensors also record changes in temperature, humidity, and atmospheric pressure.
The Micro ShockLog — RD317 records the date and time of up to 128 events, in addition to peak values of impacts at user-specified intervals. Optional accessories include a humidity sensor.
|
|
ShockWatch Impact & Environmental Recorders help monitor and record impact and shock vibration to your equipment, structures, and storage environments — ensuring protection from costly damage. Additionally, they provide an ongoing record of the environmental conditions of the product, equipment, or structure being monitored.
They provide ongoing monitoring of the intensity and duration of shock and vibration to large stationary or moving equipment, structures, and products. Tri-axial piezo-electric accelerometer technology is used to record impact direction, amplitude, and duration. Optional sensors also record changes in temperature, humidity, and atmospheric pressure.
The ShockLog records the date and time of up to 400 events. It has several unique features, making it especially suitable for applications in which the cost of exposure to out-of-specification environmental influences is very high. The instrument is equally convenient for protecting high-value fixed or mobile installations, or characterizing shock and vibration during transportation.
|
|
The low-cost paperless recorder VR06 with VGA display, 6 analog input, infrared detector, plug & play I/O cards
FEATURES:
- 6.4"Color TFT LCD with 640X480 pixels resolution, 4 times better than competitors
- 6 analog inputs in maximum
Infrared detector to prolong LCD lifetime and save the cost
- Plug & play I / O cards easy for expansion and configuration
- High security option of FDA 21 CFR part 11 compliance
- Daily, weekly or monthly report of maximum/minimum/average values
- Analog output card available to retransmit voltage or current
- Available with 12 languages English, French, German, Italian, Spanish, Polish, Russian, Chinese (simplified), Chinese (traditional), Japanese, Korean & Thai
- Anti-dust solid storage media of Compact Flash card
- 12 soft keys with simple setup and friendly operation
- Standard Ethernet , optional RS-232 / 422 / 485 communication
- High accuracy with 18-bit A-D input, 15-bit D-A output
- Vertical, horizontal trend, bar graph and numerical modes
- Portable handle easy or carrying or laboratory
Available in High performance 18 channels |
|
STL's 26 Bit High Resolution Multi Channel Data Acquisition System /
High Resolution Digital System Voltmeter is designed for uncompromising signal readout of various sensors in Production, Quality Control, Field Applications or Lab.
The combination of the linearity and stability of a calibration instrument with the system functionality of up to 3000 simultaneously measured channels is unique in the measurement industry.
Highlights :
• 26 Bit data acquisition
• low noise, large dynamic, high linearity
• Multi channel design for up to 3000 channels
via Ethernet
• Fast and highly accurate, 8.5 digits, DC- 10 KHz
• Ultra stable
• Qualified for calibration and certification
• Remote Testing capability via Intranet or Internet
The system is the appropriate answer for higher speed and accuracy in production testing and quality assurance as required in high throughput production, R&D, and also for all kind of high end calibration requirements.
+++ STL is searching worldwide for dealers +++ |
|
| Parr Instrument Company's 4846 Data Acquisition System is a PC based data logger system designed for users of Parr's 4840 Series Controller, which incorporates modules providing analog outputs of temperature, pressure and stirring speed. It can accommodate up to 8 analog inputs. (0-5 VDC only) and uses a 12-bit A/D converter. |
|
Topo is a new data acquisition front-end system designed to provide a world-class ultra-portable solution for medium channel-count dynamic data recording.
Topo features 32 (standard) analogue input channels.
- 16 bit delta sigma A to D converter per channel
- Synchronous sample rates 5-200kHz (effective 80kHz bandwidth)
- +/-10 volt channel inputs
- Synclink interface to allow multi-unit operation
- < 1kg weight |
|
LDS Nicolet provides a complete family of data acquisition systems designed to provide continuous data recording to disk at high aggregate speeds. Choose from a range of systems offering high-precision transient data capture, data recording or both. LDS-Nicolet's data acquisition systems and transient recorders have a history of unparalleled performance.
|
|
Both the model 3310 and 3320 G-Loggers come complete with an RS-232 interface cable and the G-Logger Software Program which allows you to set up the G-Logger for a particular data acquisition mission, acquire your data,
and then transfer the resulting data to your in 95/98/NT4.0/2000 PC. No data acquisition card is needed because all the communication is handled via the RS-232 COM port on your PC. The G-Logger Software program is meant to be used in conjunction with a plotting program. Should you already own or choose to provide your own plotting software, the G-Logger Software Program can be set to output the data in ASCII comma delimited format which is readable by most any data graphing software
package.
The model 3310 is a standalone unit. The Model 3320 G-Logger is designed to be used with either one model 2420 triaxial accelerometer or up to 3 Model 2010 single axis accelerometers. In order to connect 1, 2 or 3 model 2010
accelerometers, a Model 3901 (tri-Y) Adapter Cable is also needed. This adaptor allows the 2010's to be separated by up to 6' from each other. A 10' extension cable is also included and can be inserted between the model 3320 G-Logger and the model 3901 (with 2010's connected to it) or between the model 3320 G-Logger and a model 2420 Triax.
|
|
| Data Acquisition is a completely redesigned data acquisition system combining GE's hardware capability with the new Sxp software platform. The new system consists of the 408 Dynamic Signal Processing instrument (DSPi) and ADRE® Sxp software. Highly portable, ADRE® Sxp is designed to meet the changing needs of various fleet asset management programs as well as all other industries where speed and flexibility in data collection are a must. ADRE® Sxp can operate stand-alone in test stands, and with its remote viewing and operating capabilities, offers users large potential savings on unnecessary travel expenses. |
|
TD-SM LAN G3 is an Ethernet module (10/100BT) offering a cost effective solution.
Universal design to comply with all embedded systems requirements.
Ready to implement: no need to redesign the system to add the telecommunication capability |
|
Recorders, Paperless
Paperless recorders offer improvements over traditional chart recorders, including reduced operating costs and improved reliability. Paperless recorders can be connected to the LAN allowing access to data by multiple departments.
eZtrend QXe
The eZtrend QXe is a cost-effective, general purpose DIN size electronic data recorder that easily replaces 100mm paper strip chart recorders, providing the ability to capture continuous and batch data electronically.
Minitrend QX
The Minitrend QX Electronic Data Recorder represents the latest in recording technology by providing the ability to capture continuous and batch data electronically, making the analysis of the data easier, faster and more reliable.
MultitrendPlus SX
The Multitrend SX reliably records electronic data in a secure format from directly connected sensors or transmitters that can be used for documentation of process conditions and process improvement.
TrendManager Software
TrendManager Pro Software Suite is a PC software package designed to complement Honeywell paperless recorders.
|
|
Delphin's modular MinMessage device enables the acquisition of any physical value (e.g. temperature, pressure, flow). The device includes 1 or 2 I/O modules which can be combined in any way according to requirements.
Message devices are being used in a range of applications: in laboratories, the comprehensive monitoring of containers, measurement data acquisition at engine testing benches etc.. |
|
Recorders, Paperless
Paperless recorders offer improvements over traditional chart recorders, including reduced operating costs and improved reliability. Paperless recorders can be connected to the LAN allowing access to data by multiple departments.
eZtrend QXe
The eZtrend QXe is a cost-effective, general purpose DIN size electronic data recorder that easily replaces 100mm paper strip chart recorders, providing the ability to capture continuous and batch data electronically.
Minitrend QX
The Minitrend QX Electronic Data Recorder represents the latest in recording technology by providing the ability to capture continuous and batch data electronically, making the analysis of the data easier, faster and more reliable.
MultitrendPlus SX
The Multitrend SX reliably records electronic data in a secure format from directly connected sensors or transmitters that can be used for documentation of process conditions and process improvement.
TrendManager Software
TrendManager Pro Software Suite is a PC software package designed to complement Honeywell paperless recorders.
|
|
| Advanced, New Concept in Measuring Instruments - Now Simultaneously Measure and Record Non-Contact Temperature Data with Analog Phenomena Including Stress, Strain And Vibration. |
|
| Zetec's Z-Scan UT is a powerful, flexible, and compact multichannel conventional UT acquisition system. The Z-Scan UT features real-time data compression and signal averaging. This acquisition system interfaces with Zetec scanners and is driven by UltraVision UT software for excellent data acquisition and analysis capabilities. |
|
TopMessage and TopLab are similar devices and differ only in construction design. TopMessage is designed as a rail mounted device. Signals are connected via clamps.
Message devices can be easily integrated into existing company networks via its Ethernet interface. This means anybody within the network can have access to measurement data using their existing PCs.
Delphin's modular Message devices enables the acquisition of any physical values (e.g. temperatures, pressures, flows, vibration data). Measurement values are stored in the devices already scaled and lineated (e.g. bar, liter/sec, m/min, °C etc.). The scaling of thermocouples and RTD sensors are pre-configured.
A device comprises of 1 or 2 I/O modules which can be combined in any way required. Extension devices can be connected to the basic device, each also having 2 I/O modules. This means Message devices are suitable for both small and large applications.
Each analog input can be separately connected with RTD, thermocouple, volt or 20 mA signals. Expensive measuring transducers are no longer required and potential isolation means there is no need for isolating amplifiers. All I/O module analog inputs are set up as differential inputs. |
|
| Zetec's TC7700™ is an advanced eddy current instrument designed for the high-speed inspection of steam generator and heat exchanger tubes. It supports all standard Zetec eddy current probes including bobbin and rotating MRPC® probes. Additionally, the TC7700 is optimized to efficiently handle the new Eddy Current Array probes that can provide high-resolution inspection data similar to that of rotating probes, but at nearly bobbin probe speeds. |
|
| With more than one million BARTON DPU-based instruments in service around the world today, Cameron's Measurement Systems division is a premier supplier of reliable and accurate chart recorders, indicators, switches and pneumatic controllers. Originally developed in the early 1920s, our differential pressure technology features a welded bellows assembly that increases accuracy while dramatically reducing the effects of wear. To facilitate quick and easy repairs all DPU based instruments are supported with pre-calibrated exchange or repaired sub-module bellows assemblies. |
|
The TopLab device is designed for changing applications in laboratories and in R & D.
External devices (e.g. weighing machines, modems, large displays) can be connected to Message devices via serial ports. Communication is via Modbus (LAN). Communication via Profibus DP is also available.
Configuration of TopLab devices takes place via the user friendly "BusManager" PC software. Configuration data is transmitted to the device and securely stored there. Configuration data can be amended and adapted during operational run time.
Typical applications for TopLab devices are the acquisition of measurement and process data, as a data logger for universal measurement values, remote monitoring of decentralized plant and machinery, test bench and laboratory automation. |
|
Eagle is a new data acquisition system designed to provide a world-class rack-mounted solution for medium channel-count dynamic data recording, and real-time monitoring requirements. Eagle is particularly suited to applications close to the test article with a rugged 19" rack-mount chassis.
Eagle may be operated in a standalone mode as a mobile acquisition system (with screen & keyboard fitted) or as part of a larger remotely-controlled acquisition system.
Eagle features 32 analogue input channels.
- 24-bit delta-sigma A-to-D converter per channel
- Synchronous sample rates 5-200 kHz (up to 80kHz bandwidth)
- All inputs are configurable for AC, DC, ICP or Tachometer signals
- Each channel includes selectable ranges up to +/-1, 2, 5 or 10 volts
- Synclink interface to allow multi-unit operation
- < 5kg weight |
|
|
