|
|
FieldLogger - Virtual Professional recorder
This microprocessor based suppliers of data acquisition and recorder can handle any analog input and will operate as an RTU linked to a PC for on line recording and supervision or as a stand alone data logger with real time clock and graph capabilities. DIN rail compatible, it has 8 universal channels that will accept different input sensors at the same time and can be easily expanded.
8 universal analog channels per module.
Accepts t/c J, K, T, E, N, R, S, B; 4-20 mA, Pt100, 0-50 mV without hardware change.
Internal memory (optional) for 32,000 to 128,000 recordings and real time clock.
Input resolution: 12,000 levels.
Accuracy: 0.1 % of full scale.
Scanning: 8 channels in 0.5 seconds.
Reading rate: from 0.2s to 1 day.
Power: 100-240 Vac, optional 24 Vdc/ac
Alarms: 2 relays 3 A for the 8 channels.
Digital input for remote START/STOP.
RS-485, MODBUS - RTU, 19200 bps.
35 mm DIN rail mounting.
ABS enclosure: 105 x 90 x 60 mm
|
|
TagTemp is a compact water proof temperature data logger. Housed in an IP67 enclosure, TagTemp can be installed in harsh environments in different applications.
It can be easily programmed and set via a handy infrared IR-LINK 3 interface connected to a USB port under Windows software or with a Palm compatible PDA IrDA interface under PalmOS. LogChart II software allows for logger configuration, recorded data retrieval, plotting, historical analysis and exports data to spreadsheets.
Powered by an inexpensive lithium coin cell, it can operate continuously for more than one year. Its high resolution (14 bit ADC) and data memory capacity (16k loggings) makes it the ideal product for accurate monitoring of temperature for long periods or fast sampling. |
|
ALMEMO datalogger offer a professional measurement and documentation for research and developement applications and for process driver. The instruments are available as various versions with many options and adaption possibilities. There are solutions for single measurements well as for complete supplier of data acquisition with a big quantity of measuring channels. The instruments can be installed as decentral data acquisition and in a network with up to 99 units. Nearly each sensor is adabtable via intelligent ALMEMO industrial connectors or multisensor professional connection sockets. The measuring data can be transfered via radio transmission, modem, current loop, internet, professional ethernet or SPS. ALMEMO datalogger from AHLBORN are the gurantee for save data acquisition with professional measurement equipment.
|
|
The Latest in the OCS Range Integrates Screen, MANUFACTURERS OF PLC, Network and I/O "All in One" Product.
The OCS NX has the following features:-
- 128x64 or 240x128 Pixel Backlit LCD Screen.
- Embedded Ethernet.
- Optional Fieldbuses.
- Compact Flash.
- Smartstack Interface.
- 2 Serial Ports.
- USB Programming Port.
- Fibre Optic Interface.
- Integrated Fast Industrial counter I/O.
- Membrane with Function Keys.
- Optional Touchscreen.
- Optional Integrated Base I/O.
Instead of using Separate components (PLC, HMI , Network and I/O) to form a solution , Horner has integrated this functionality into a single product – the Operator Control Station (OCS).
The OCS provides a complete solution and is easily programmed by a SINGLE professional software package called CSCAPE which allows screens to be easily embedded in the Logic Programme whether it is LD, IL, ST , SFC or FBD it is incredibily easy to use.
Contact us for more Pre Release Information
|
|
With these loggers you can read-out the majority of our detection. We have a waterproof version, meant for unattended logging up to 6 months. And we offer a handheld logger with a LCD-display.
|
|
myPCLab is a very compact Industrial data acquisition tool which connects to a PC via a USB port and professional monitors two universal input analog variables along with one digital input. From hobbyists to scientists, from simple technical tasks to complex engineering activities, myPCLab can be an invaluable tool for on-line monitoring and data logging in school, laboratory research, machine data recording and industrial understanding.
It comes with an intuitive and easy-to-use Windows software which plots and records data, shows gauges, bargraphs and digital readouts. The USB port is accessed as a virtual serial port which makes myPCLab compatible with SCADA softwares with Modbus RTU driver or with any program with ASCII serial communication. Multiple units of myPCLab can be connected to the same computer.
- Dual universal type analog inputs.
- One digital input.
- Internal temperature sensor manufacturer for cold junction compensation or room temperature monitoring.
- Programmable analog inputs: Suppliers of thermocouples type J, K, T, E, N, R, S and B, Pt100 RTD (3-wire), 4-20 mA, 0-50 mVdc or 0-10 Vdc.
- Accuracy: 0.2 % of full scale for Pt100, current and voltage; 0.25 % of FS ±3 °C for thermocouples type R,S and B; 0.25 % ±1 °C for all other thermocouples; ±1,5 ºC for internal temperature sensor.
- Operating environment: 0 to 50 °C, 10 to 90 % relative humidity, non-condensing.
- ABS case, dimensions: 70 x 60 x 18 mm. |
|
Records universal input from any 0-20 mA (or 0-5V) professional transmitter and can be used to monitor pH, flow, fluid level, or ANY variables you choose.
Features simultaneous monitoring of multiple variables, 5-year battery life, 32,512 data sample storage points and is user-selectable from 0-20 mA or 0-5V. |
|
HUMLOG 10
Data logger for humidity and temperature
HUMLOG 10 series humidity/temperature data loggers permit the exact and professional recording of humidity and temperature values. Low power consumption and large memory size enable long-term data capture for a wide range of applications.
HUMLOG 10 / HUMLOG 10TSE:
The elegant 2-part housing, which consists of a display module and a plug-in sensor module, enables easy installation and a fast exchange of the sensor unit when service is required.
The current measurement data on the large display is easy to read even from a distance of several metres.
HUMLOG 10THC:
The compact HUMLOG 10THC version does not have a display and is equipped with internal H/T sensors.
Measurement Data - Evaluation & Configuration:
Measurement data evaluation and instrument configuration can be conveniently performed via the serial RS232 interface with a PC or notebook professional computer by means of the Smartgraph TM 2 professional software, which runs under MS Windows TM.
Smartgraph TM 2 can display the recorded measurement data in graphical form or as a table. The layout of the display can be individually configured by the user. |
|
ShockWatch temperature industrial recorders give you the ability to monitor and record temperature and humidity to ensure acceptable environmental conditions for your sensitive goods.
The DataScribe RH52s device industrial monitors and records temperature and humidity through a linear dual channel. Its small size and built-in detection allow it to go where no other logger can, which enables it to be easily concealed for added security. Despite the small size, this device is accurate, reliable, and has a large memory capacity. Accuracy is an impressive +/- 1 degree F and +/- 3% RH guaranteed. The quality of the RH sensor is unaffected by condensation, immune to most reagent vapors, has a fast response time, and has excellent long-term stability. The large memory and long battery life make this device ideal for remote applications. It records up to 16 months of hourly readings in protected memory, ensuring that you don't lose your data if the battery is removed.
|
|
%RH, °C, °C td extern °C
•Long-term drift-free moisture sensor with fast reaction time
•Memory up to 48,000 measurement values
•Checking and calibration possibility with calibration set
•Protector cap for contaminated air or corrosive gases |
|
Only Download Data When You Need To!
24/7 feedback through Min/Max or Real-Time Display, bolstered by visual and audio high/low alarms. Features: USB-enabled triple-speed downloading, FLASH memory card data transfer-capability, +/-0.8F accuracy, large display, and visual/audio alarms |
|
MCC has announced the addition of two battery powered temperature dataloggers to its growing datalogger line. These battery powered dataloggers are offered in two models: the USB-501 for remote temperature logging, and the USB-502 for remote temperature and relative humidity logging. These products are the perfect, cost-effective solution for long or short-term data logging applications. Both the USB-501 and USB-502 log up to 16,382 temperature measurements in the -35 to +80 ºC (-31 to +176 ºF) range. The USB-502 additionally supports up to 16,382 additional relative humidity measurements over the full 0 to 100 percent range. Rates for both dataloggers can be set from 10-second to 12-hour intervals. The loggers plug directly into a standard PC or laptop USB port for setup and data download. The included USB-500 Series Data Logging Application software supports both products. This user-friendly, intuitive software is used initially to configure the loggers, program alarm thresholds, logging rates, start times, and measurement units. When the loggers are retrieved from the field, the software provides simple one-click access to download, display, and export the data.
With the included USB-500 Data Logging Application software, the user can display time-stamped temperature, relative humidity, dew point, and alarm limits on a powerful strip chart graph. The data can also be downloaded to a text or a .csv (comma separator values) file. Supporting these file types allows users to easily export the logged data to Excel. With one mouse click, spreadsheets and reports are easily generated. The software and USB-500 series dataloggers are compatible with Windows 2000/XP. |
|
| The LogBox-RHT is a stand alone data logger for temperature and relative humidity. The sensors are built in and the data is stored in local memory, from where it can be transferred to a computer or Palm top for visualization and analysis in the form of tables or graphics. |
|
WebServer WS10
The WebServer WS10 is a device for data acquisition, logging and transmission. It is capable of integrating instruments and sensors to the Internet, ethernet and wireless. The inputs for data acquisition can be either the built-in analog and digital inputs or any inputs from the external equipments connected to the WS10 through the RS485 interface (Modbus protocol). Data transfer can be accomplished through the ethernet interface or modem (mobile or conventional) using ordinary Internet resources, such as the internet browser, e-mail and TCP connection.
- Internal memory for off-line data logging (16 bit CPU, with 512KB RAM)
- 2 Serial Interfaces (RS232, RS485 or Modem)
- Ethernet 10 BaseT Interface
- It suports TCP/IP, PPP (client and server), HTTP, FTP, SMTP, DHCP, Modbus TCP, Modbus RTU protocols
- Mobile professional wireless networks (GSM GPRS or CDMA 1XRTT)
- SMS in case of alarm
- Four inputs, configurable as:
Digital inputs for counting voltage pulses or dry contacts, with totalizer for flow measurements.
0- 5 V , 0-20 mA or 4-20 mA analog inputs
Accuracy: better than 0,3 % of input full scale range.
- Possible input types combination:
4 digital inputs
1 analog and 3 digital inputs
2 analog and 2 digital inputs
4 analog inputs
- 2 Relays Output
- Ambient conditions: 0 a 55 °C, 35 % to 85 % Relative Humidity, non condensing
- Dimension: 105 x 90 x 60 mm
- SMPS 100 to 240 Vca / 50-60 Hz / 4 VA max. |
|
| This data logger fits in toolboxes, tight corners or in wide open spaces without attracting attention. Built for real-world water and gas pressure monitoring and features: water-resistant case, 3 year battery life, and an unobtrusive design. |
|
8-channel, Web-enabled temperature measurement modules :
- WEB-TEMP supports J, K, R, S, T, N, E,
& B type manufacturers of thermocouples, 2-, 3-, or 4-wire RTDs and thermistors,
and semiconductor temperature devices
- WEB-TC supports thermocouples only
- Built-in ambient CJC temperature sensor specifications
- Independent temperature inputs
- Built-in Web server/Web page |
|
Handy logger MR2041-E is a palm size data logger, it capable to store up to 10000 data per each channel. Psu of logger is selectable from AA battery or AC adaptor, so it is usable as a portable type logger or fixing type logger. Using the multi-media memory card (MR-2041-M) can stores measured data up to 5 million.
Using the exclusive software, recording/recalling of data and programming of logging parameters can be executed with logger or through a personal computer.
- Input signals: supplier of thermocouple K, E, J, T, 0 to 5V, 0 to 20mA
- Simultaneous 4 channels, measurement and display
- High/low alarms for each channel
- External memory (multi-media card) is usable.
- Calculation function: maximum / minimum / average
- Logging method: log mode and tag-mode
- Data process-able through a personal computer
- CE marking, IP 64 dust tight and splash proof enclosure
- AA battery supply
|
|
Data Logger - Series BDL
Measure Temperature, Stores up to 2,048 Readings
Data Logger - Model MTL10
Measure Temperature, Stores up to 2,048 Readings
Data Logger - Model DL-8T
Measure Temperature, Stores up to 1,048,000 Readings
Data Logger - Model DL001
Measure Temperature, Stores up to 32,768 Readings
Data Logger - Model DL-PRT150
Measure Temperature, Pressure, or RH, Store up to 87,000 Readings, 4-Channel
Data Logger - Series DL6
Measure Temperature, Pressure, or RH, Store up to 32,768 Readings, 5-Channel
|
|
UR C30 Controller System
Digital Controller for Bay Control and Substation Automation
Protection and Control:
User-definable protection functions
Programmable logic, timers, counters
Distributed logic, remote I/O expansion
Up to 96 digital input and 64 digital outputs)
Transducer I/Os (RTD, dcmA)
Monitoring and Metering:
Oscillography - 64 samples/cycle, up to 64 records
Event Professional recorder - 1024 time tagged events, 1 microsecond
resolution
DataLogger - Up to 16 channels with user selectable
sampling rate:
User Interface and Programming
Front panel display and keypad for local access; RS232 port for local PC access
User programmable local display, LEDs and pushbuttons
Customize protection and control functions with FlexLogic,
FlexCurves, and FlexElements:
Includes EnerVista LaunchPad - Simplified relay setup and programming
Multi-language - French, Chinese, Russian option
Communications:
Networking options - Ethernet-fiber (optional redundancy), RS422, RS485, G.703, C37.94
Multiple protocols - IEC 61850, UCA 2.0, DNP 3.0, Modbus, IEC-104, Ethernet Global Data (EGD)
Direct I/O - exchange of binary data between URs |
|
The Gage Box remote Industrial data acquisition System is a shop floor proof, expandable gauging system.
The system is composed of dedicated, stackable modules to manage analog detectors and digital Input/Output signals.
All modules are daisy-chained together and exchange measurement data, programming data and I/O signals with the E9066™ Industrial PC through a simple RS232 serial link. Any commercial PC can also be used.
The system allows direct interfacing and data collection from TESTAR probes or measuring cells, and from a wide variety of third party sensors.
All data acquisition functions (sampling, signal conditioning, A/D conversion) are performed locally (freeing the computer from any overhead or operating system latency), and then conveniently transferred to the system’s companion Industrial PC, the E9066s™, or to any PC-compatible data collector, via a standard RS232 port.
A high speed, serial communication link with a dedicated ISA-compatible interface card is also available, for process-intensive or critical measurement applications. |
|
Description
The FBG-Datalogger is a compact, low-cost and completely intelligent, portable device that can monitor up to 16 different optical lines. The core of the device is a state-of-the-art Fabry Pérot tunable filter. The FBG-Datalogger is controlled with a built-in computer and touch display. Controlling through TCP/IP, RS232 or GPRS is possible as an option.
The FBG-Datalogger provides powerful, reliable, easily integrated measurement options, allowing Fibre Bragg grating (FBG) and other optical sensor developers and system integrators to focus on customer application needs and installation requirements.
The FBG-Datalogger was specifically designed to meet the diverse needs and challenging requirements of the fibre optic sensor community. The speed, narrow line width and superb repeatability of the Interrogator provide the accuracy and resolution needed for a wide range of optical sensing applications.
Features
- 10pm Wavelength Accuracy
- 40nm Scan Range
- 5 mW Launch Power
- 1pm Repeatability
- Fast Scan time
- 8 or 16 Optical lines
Applications
- Pipeline Stress Monitoring
- Offshore Oil Platform Riser Stress Monitoring
- Oil well Temperature and Pressure Monitoring
- High-Tension Line Temperature Monitoring
- Geotextile Strain Monitoring
- Security / Defense Fence Monitoring
- Civil Structure Stress and Strain Monitoring
- General purpose Optical Spectrum Analysis |
|
| ViewGraf XP combines the best features of a modern data acquisition system with those of a traditional chart industrial recorder at an affordable price. Virtually every aspect of ViewGraf XP is modular, enabling unlimited flexibility, from the removable 11 inch real-time writer and 12.1 inch real-time display panel, to a wide variety of supplier of signal conditioners for any type of signal. Record data directly to the onboard high capacity hard drive or to the optional real-time writer. While recording, perform real-time calculations as virtual channels using over 30 standard functions or create any custom function up to 200 characters in length. The onboard Windows XP operating system offers windows familiarity, easy data transfer to a PC network, quick reporting to any professional printer and removable media capabilities for long term storage. |
|
Micro Technic offers a range of combined RTUs and data loggers, dedicated at bringing your remote process data available anywhere and anytime!
Bring your product online with our range of GPRS data loggers!
|
|
Microprocessor based Data Logger
Product Description:
In a process industries, where "n" number of parameters are required to be monitored and recorded, for various reasons, the data logger featured here is most ideal. Using single data logger it is possible to monitor and log the temperature or process values sensed through supplier of thermocouple or INDUSTRIAL RTD(Pt-100) or other process variables, of maximum 16 different points. One or more data loggers can be combined for monitoring more than 16 channels. The measured analog values are also stored in the internal non-volatile memory along with the real time and date. The stored datas can be down loaded to the dot matrix professional printer using the built in parallel port and/or on to the computer using the built in serial port on RS485 link. Supporting window based manufacturer of data acquisition software allows user to monitor the on-line or off-line datas in the graphical or tabular form on the screen. The high and low alarm levels are also programmable for each channel. PLEASE CHECK MORE DETAILS IN CATALOGUE SECTION
http://pdf.directindustry.com/pdf/libratherm-instruments/data-logger-for-temperature-humidity-etc/28920-29606.html |
|
UR C30 Controller System
Digital Controller for Bay Control and Substation Automation
Protection and Control:
User-definable protection functions
Programmable logic, timers, counters
Distributed logic, remote I/O expansion
Up to 96 digital input and 64 digital outputs)
Transducer I/Os (RTD, dcmA)
Monitoring and Metering:
Oscillography - 64 samples/cycle, up to 64 records
Event Professional recorder - 1024 time tagged events, 1 microsecond
resolution
DataLogger - Up to 16 channels with user selectable
industrial sampling rate:
User Interface and Programming
Front panel display and keypad for local access; RS232 port for local PC access
User programmable local display, LEDs and pushbuttons
Customize protection and control functions with FlexLogic,
FlexCurves, and FlexElements:
Includes EnerVista LaunchPad - Simplified relay setup and programming
Multi-language - French, Chinese, Russian option
Communications:
Networking options - Ethernet-fiber (optional redundancy), RS422, RS485, G.703, C37.94
Multiple protocols - IEC 61850, UCA 2.0, DNP 3.0, Modbus, IEC-104, Ethernet Global Data (EGD)
Direct I/O - exchange of binary data between URs |
|
|
