|
|
SIGNAVANT SN75
- for machining cast iron,extreme soft and free cutting through positive geometry
- SNHX-insert utilizes 8 cutting edges for economy
- large depth of cut allows high volumes of metal removal
AVANTOP VC1.1 / VC2.2
- high metal removal rates using fine pitch design
- easy indexing because of a wedge
- free and soft cutting
AVANTOP KC1.1 / KC2.2
- 8-cutting edge OFensiva1505 insert
- double clamping allows extremely high feed rates
- wedge secures insert and prevents movement
Face milling cutter SE45
- suitable for roughing and finishing with the same insert
- up to 8mm depth of cut is possible
- square insert provides stable assembling
Face milling cutter SX45
- suitabe for roughing and finishing with the same insert
- large depth of the cut <8,8mm
- double clamping provides stability and easy indexing
FINAVANT OF1.1
- new cartridge clamping system
- exact fit of the cartridge in the cutter body
- easy setting
- high precicion of radial run out and very good surface quality
Cartridge face milling cutter MSK45
- new clamping system of wedge on the tool body
- cutter body facilitates different cartridges accommodating
different insert geometries
- consistent axial and radial run out due the precision cartridges
|
|
Features:
- tempered steel Cr-Mo (tempered to 1250 -1400 N/mm2)
- integrated coolant hole
- optimised chip pockets
- high manufacturing precision:
- radial run-out in relationship to master insert: 0.02 mm
- axial run-out in relationship to master insert: 0.02 mm
- compact pleasant design
- helical chip geometry
- axial alignment positive
- radial alignment negative
- optimum connection to milling adapter
|
|
Run fast in any direction
The milling method and quality of the cutter and inserts are vital factors for efficiency. It is also important to consider the finish that can be obtained and the amount of material that can be removed in one pass of the cutter.
With the new CoroMill® 490 and its four-edge inserts, cutting is lighter than ever. An outstanding insert geometry design and new grades give sharper edge lines. Less force is required for cutting and the result is a smoother profile, requiring less finishing than before, with lower sound in the machine shop.
|
|
ISCAR offers a wide range of face mills using a variety of different types and sizes of inserts. The HELI2000 inserts are available in 10 and 15 mm (.394 and .591") sizes for an easy and accurate cut and a high surface finish. The square QUAD2000 series of inserts are available in 10, 12 and 16mm (.394, .472 and .630") sizes.
MILL2000 inserts come in 3 and 20 mm (.512 and .787") sizes for rough milling at high feed rates.
The versatile CHAMMILL milling tools can carry four types of inserts in the same pocket; the HELIOCTO uses both octagonal and round milling inserts in the same pocket. Many cutters are also available with 45° and 75° lead angles.
|
|
CoroMill 245 is the most versatile facemill on the market. It offers an opportunity to reach the best productivity for each specific type of operation - just by combining the most suitable cutter pitch with the most relevant insert geometry and grade.
CoroMill 245 is the first choice cutter for versatile facemilling.
|
|
|
Utilizes a series of overlapping plunges producing higher metal removal rates and greater reaches than conventional milling
|
|
V590 Square Shoulder Mills
The V590 has positive top-form geometry inserts to create lower cutting forces. The cutters are designed to generate a true 90° square shoulder, eliminating secondary operations saving time and improving efficiency. Coolant through holes on end mills is standard and large chip gullets ensure efficient chip evacuation. The V590 is ideal for ramping and helical interpolation operations as well.
|
|
CoroMill® 245-18 is a robust cutter with large, thick inserts capable of heavy chip removal rates. This larger version of CoroMill 245-12 widens the choices available and will cover more demanding applications.
CoroMill 245-18 is light cutting making it the power-efficient first choice facemill for most ISO-P, -M and -K materials in the ISO 50 and 60 machining centres. It is capable of milling surfaces with excellent finish – particularly when used with wiper inserts.
Reinforced cutting edges for 6-8 mm deep cuts within a feed range of 0.2 up to 0.4 mm enable the cutter to mill blanks with forging scale and large variations in required depth of cut. Under favourable conditions a max cutting depth of 10 mm is achievable.
CoroMill 245-18 is available in diameters 80-250 mm as coarse, close and extra close pitch for maximum performance in different machining conditions.
|
|
CoroMill® 245-18 is a robust cutter with large, thick inserts capable of heavy chip removal rates. This larger version of CoroMill 245-12 widens the choices available and will cover more demanding applications.
CoroMill 245-18 is light cutting making it the power-efficient first choice facemill for most ISO-P, -M and -K materials in the ISO 50 and 60 machining centres. It is capable of milling surfaces with excellent finish – particularly when used with wiper inserts.
Reinforced cutting edges for 6-8 mm deep cuts within a feed range of 0.2 up to 0.4 mm enable the cutter to mill blanks with forging scale and large variations in required depth of cut. Under favourable conditions a max cutting depth of 10 mm is achievable.
CoroMill 245-18 is available in diameters 80-250 mm as coarse, close and extra close pitch for maximum performance in different machining conditions.
|
|
CoroMill 490
Sandvik Coromant has launched the first of a new generation of shoulder mills, the CoroMill 490, which reduces machining costs by up to 25 per cent. CoroMill 490 is a high-precision tool for applications where reduced depths of cut and less final machining are required, as with the near net shape precision forgings and castings used by machine shops for higher productivity. Less, but more precise, work is needed on these castings and forgings. This is possible with the four edge insert design of CoroMill 490 and reduces substantially the cost per component for customers.
CoroMill 390
A new range of damped silent tools from Sandvik Coromant is bringing substantial performance benefits to complement the existing range of long and slender CoroMill® 390 milling cutters. Integrated dampening offers more efficient, vibration free machining to improve the performance of cutting tools working in deep cavities and pockets. The stabilization of the machining process in this way provides wider machine utilization for face and shoulder milling, especially in long overhangs and will boost the capabilities of long reaching tools.Reducing vibration in often tricky situations provides the confidence needed to increase the cutting parameters without compromising work piece quality. This enables the achievement of greater machining success with the CoroMill® 390 - including improved component surface finish and longer tool life.
|
|
CoroMill 390 is the most versatile facemill on the market for better accessibility. It offers an opportunity to reach the best productivity for each specific type of operation - just by combining the most suitable cutter pitch with the most relevant insert geometry and grade.
CoroMill 390 is the first choice cutter for versatile facemilling.
|
|
|
Among the standard 1D/2D/3D millig cutter systems Kieninger is a specialist for machining aluminium and plastics with PCD and hardened steel or cast iron with CBN.
|
|
The new SMAX face mill line featuring the DPM434R (18MM long) insert series is now available in both 0 degree and 45 degree lead angle versions.
The 0 degree lead generates true square shoulders to allow shouldering
and multiple Z-axis depth milling passes. The 45 degree lead allows for
higher chiploads and feedrates.
|
|
These tools stand out due to their simple, robust design, their excellent milling performance and quality, as well as due to their high efficiency. They are suited for high cutting speeds and feeds (HSC). The low weight and the few parts mounted simplify the handling.
At the center of the milling head are high-precise PCD inserts which can be adjusted very simply and rapidly.
|
|
General description :
Our SDP Spider Mill is designed for high productivity face milling of gray and ductile cast irons. It is a 90 degree double negative milling cutter with positive cutting insert geometry. Each insert consists of eight cutting edges. A unique positive chipbreaker insert provides less cutting force, more productivity and a longer tool life. Available with ACK100 and ACK200 CVD coated grades.
|
|
PREZISS DIAMANT offers a full range of PCD milling/planning heads for every kind of machining. With the original PCD indexable insert head from PREZISS DIAMANT, it is possible to achieve any finishing quality requirement thanks to its unique design. The PCd inserts are adjusted at the same time in length and diameter to keep always original dimensions and they can be sharpened from 3 to 5 times. The internal coolant system is specifically designed to easyly evaquate the waste as well as keeping cool the working area.
Excellent yield and high milling quality.
|
|
|
Face Milling: Anodized aluminum PCD face mills are designed to run at maximum speeds and feeds and produce improved flatness. Wiper blade geometry is used for deburring applications and adjustable PCD blades are provided with configured geometry. Standard balancing to 15,000 RPM and high velocity balancing available upon request.
|
|
The CoroMill 390 endmill offers precision performance in a class of its own. In many ways, the CoroMill 390 is the first high-precision indexable endmill. Playing in the same league as solid endmills.
The CoroMill 390 produces mirror finish surfaces and true 90° shoulders. Noise and vibration are reduced to a very low level.
|
|
Diameter range from 1.00” – 4.00”
4 indexes without going to a left hand cutter.
Backdrafted relief angle for reduced side pressure in long reach applications.
Utilizes the same inserts as the QuadBore and PowerQuad milling line
End mills equipped with the TopOn adaption for reach flexibility.
All tools equipped with coolant through.
|
|
| ... products without technical information |
| |
Model 20 Disc Grinder:
Three versatile versions available in popular 3 Phase, 60 Hertz electronic options
Model 20 : Disc Speed fixed at 1725 RPM
Model 20B : Fixed speed with a 10 ft. lb. mechanical disc brake
Model 20VB : Continuously adjustable from 200 to 1725 RPM with an adjustable electronic disc brake.
All model 20 disc grinders are available with magnetic starter options.
The Model 20VB speed controller includes all control and overload features of a standard magnetic starter in addition to the solid state frequency controller.
- Precise enough for pattern makers
- The ideal tool to shape, flat grind, contour metal, wood and plastic
- Rapidly grinds and deburrs castings or fabricated parts
Model 12 Disc Grinder:
- Rigid cast aluminum construction
- Cast iron table
- Precision billet aluminum disc
- Bench or pedestal mounted
- Forward/Reversing switch
- Easy disc change with unique swing away feature 1 1/2 HP, 1725 RPM Baldor motor
|
|
|
|
