|
|
31000 Series
Masoneilan's 31000 Series control valve is a PFA lined assembly designed for corrosive applications. It features an eccentric rotary plug design that provides tight shut off and low dynamic forces.
35002 Series Camflex®
Masoneilan's 35002 Series is the original "universal" control valve, featuring a low friction eccentric plug design, providing excellent throttling control within an extremely compact assembly. The standard design includes an integral bonnet, a direct mounted actuator, and fully enclosed positioner linkage.
|
|
We can control it, in your process as well
Electromotive or pneumatically driven Process Valves with bodies of stainless steel or plastic for various controlling tasks in fluids, gases or steam
|
|
|
|
|
|
2/2-way Angle Seat Valves DN 8-80
The Angle Seat Valve is composed of a 2/2 way Angle Seat valve body and a pneumatically operated piston actuator, which is mounted with a stainless steel adaption to the valve body. Depending on the size, the actuators are made out of plastic or aluminium. The plastic actuators are made out of a high temperature resistant plastic. A self-adjusting gland assures reliable tightness. The gland is protected against dust and damage by a wiper, which is located in front of the gland.
The SED Angle Seat Valve is suitable to separate, pilot, dose and control liquid orgaseous media. The Angle Seat Valve can be designed to specific requirements. In applications for control engineering optimized flow characteristics are achieved by reduced cv-values and equal percentage or linear characteristic curves. Even simple solutions like noise reduction are possible.
Features
* high flow rate
* screwing for actuator assembly isolated
* from media, sealing is prior to the thread
* 360° adjustable actuator
* comprehensive modular accessories,
* even for later assembly
* actuator normally closed, normally open or double acting available
* different valve body connections, e.g. threaded socket, butt welding spigots to different standards, clamps, etc.
|
|
Globe and control valves
DN 4 – 150, globe valves and angle seat globe valves, valve bodies in stainless steel, cast bronze, cast iron, cast steel, PVC-U, connections to DIN, ISO, BS (butt weld spigots, flanges, male and female threads), seal materials: PTFE, Peek, steel-steel, manual, pneumatic and motorized operators, complete control valves available, control fittings and regulating cones, to be combined with and controlled via GEMÜ positioners and process controllers
|
|
|
All valve series utilize a non-rotating rising stem design, with working pressures to 150,000 psi (1379 bar). Tubing sizes range from 1/4" to 1". Tubing connections utilize Autoclave Engineers coned and threaded design or our Speedbite Ferule Style connections for pressures up to 15,000 psi. Operating temperatures from -423°F to 1200°F (-252°C to 649°C). 316 stainless steel construction, other material options available.
|
|
Angle Seat Valve - Series SAV-BT
Compact Design, 1/2" to 2", Bronze NPT, Use with Gases and Liquids
Angle Seat Valve - Series SAV-ST
Compact Design, 1/2" to 2", SS NPT, Use with Gases and Liquids
Angle Seat Valve - Series SAV-SSC
Compact Design, 1/2" to 2", SS Sanitary Clamp, Use with Gases and Liquids
Angle Seat Valve - Series SAV-SF
Compact Design, 1/2" to 2", SS Flange, Use with Gases and Liquids
|
|
|
Streamlined flow valves, inside and outside screw with bellows, maintenance free, manufactured of grey cast iron PN 16, nodular cast iron PN 16-25, carbon steel and stainless steel PN40.
|
|
Needle valve with complete or brought back siege
ND (nominal diameter): 80-1000
other diameters or pressures under request
NP (nominal pressure): 10-64
MAIN TECHNICALS SPECIFICATIONS
Rising, rotating stalk.
Right model or set square
Technology: Molded
Principle: Classique
|
|
Pipeline Isolation Valves for a Wide Range of Process Applications. Valves can be fitted with Actuation. Valves can be supplied in Straight or Angle Pattern. Hopkinsons range of globe valves offers a choice of configuration for stop/regulating, check, and combined stop and check duties
Features / Benefits
Isolation/Control
General purpose isolation stop valves
Steam/Fluid isolation achieved by the screwdown action of the Valvehead to the Seat Straight and Angle Pattern Design
Applications
General purpose, isolating and blowdown
Main steam stop and non-return valves (shell boilers)
Check feed version (shell boilers)
General drain duties
Double isolation drain duty as ‘martyr‘ valve
With parabolic valve head for precise flow control
Continuous blowdown (micrometer valve)
|
|
Hydratron can supply from stock a wide range of high pressure needle valves suitable for working at pressures of up to 100,000 PSI (7,000 Bar )
They are available with NPT ( 10,000 PSI ), Medium Pressure ( 20,000 PSI ) and High Pressure ( 60,000 PSI ) connections to suit 1/4", 3/8", 9/16", 3/4" and 1" OD tubing.
The valves are manufactured with wetted parts manufactured from 316 SS as standard but can be supplied with wetted parts manufactured from other exotic materials such as Hastelloy or inconel if required.
The range available from Hydratron includes air operated valves, valves fitted with replaceable seats and valves fitted with fine metering spindles.
|
|
|
TECVAL instrumentation needle valves are designed to be used in multiple applications: back-seat needle valves (CP-04, CP-06), others which can be supplied with bridle for pattern manometer (CP-11) or with alignment sleeve (CP-13); compact design integral bonnet valves with or without positioner nut (CP-09) and the solid MULTIPORT valves with three female outlets.
|
|
|
|
|
|
|
Beswick Engineering announces the release of a micro needle valve with M3 threaded inlet and hose barb outlet. The new M3 threaded needle valve is designed and manufactured for applications where space, leak-tightness, durability, and light weight are required. It can be used to control mini-cylinders, nozzles, timing circuits, filling heads, bleed vents, and in many other metering applications. It weighs just 2.26 grams and the installed height is about 10.4 mm. The needle valve allows precise flow adjustment. The adjusted flow remains stable even during temperature fluctuations as the needle and valve seat are both manufactured from stainless steel. The valve body swivels 360 degrees to facilitate installation and orientation. The needle valve body is designed with “built-in-barbs” which saves space and reduces cost of connections and assembly time. The valve controls flows from 0 to 1 SCFM at 50 psig. The metal to metal seal provides positive shut-off to 25 in Hg. Applications include: hydrogen fuel cells, medical and dental equipment, instruments, laboratory equipment, ink jet print engines, semiconductor manufacturing equipment, toxic gas detectors, aerospace equipment, packaging machinery, industrial robots and many more.
|
|
|
|
|
|
The needle valve can be used to control mini-cylinders, nozzles, timing circuits, filling heads, bleed vents, and in many other applications. The valve is also available with options such as a panel mount thread and a knob for easy adjustment. Maximum inlet pressure is 300 psig.
Features:
• The needle valve allows precise flow adjustment due to 56 threads per inch adjustment and three degree taper of the needle.
• The adjusted flow remains stable even during temperature fluctuations as the needle and valve seat are both manufactured from stainless steel.
• The valve body (elbow or tee) swivels 360 degrees to facilitate installation and orientation.
• The needle valve body is available with “built-in-barbs” which saves space and reduces cost of connections and assembly time. Call factory for details.
• The valve controls flows from 0 to 1 SCFM at 50 psig.
• The metal to metal seal provides positive shut-off to 25 in Hg.
Material: Brass, 303 or 316 stainless steel body; all models have 316 stainless steel needle, 303 or 316 stainless steel stud and cap, stainless steel lock nut and optional brass knob.
|
|
Manually handled valves designed to ensure a reliable and secure cut, allowing a certain flow regulation.
Pressure interval: 100 bar / 750 bar
Temperature interval: -20ºC / 600ºC
Connections: from 1/4" to 3"
Made in several alloys.
|
|
M-flow micro valves were developed for fine dosages of gases and liquids.
They are an integrated constituent of the float-rotameters by Vögtlin and are often used as separate valve units for OEM applications
– Compact, modular construction
– Stable and precise regulation
– Leak-proof when closed
– Customer specific versions
– Aluminium or stainless steel
– Different seal materials
– Straight valve, corner valve or insert
– 15 turn spindle, no hysteresis
|
|
Y type globe valve
ND (nominal diameter): 15-400
other diameters or pressures under request
NP (nominal pressure): 16-420
MAIN TECHNICALS SPECIFICATIONS
Execution: A105, AISI 316, AISI 304
Waterproofness PTFE or the other joint in the demand
Can have risen with any types of actuators
Connection of actuators following one ISO 5211
Fixation to reins or to weld
Technology: Molded or Forged
|
|
The F-2822 Series Needle Valves are ideal for instrumentation and industrial applications. The fine angle of the needle allows for the precise control of flow, which is restricted in both directions. The Needle Valves are adjustable from 0 to the equivalent flow of a 0.025” orifice and can be provided for inline installation or panel mounting.
Two models are available: The standard glass filled nylon model is available with straight ports for 1/16” I.D. tubing or barbs for 1/16” and 1/8” I.D. tubing. The glass-filled polypropylene model is beneficial for those applications where chemical resistance is a concern.
Both models can be supplied with a nickel-plated brass or stainless steel needle. The needles are available with a screwdriver slot adjustment or knurled knob. Buna-N, Viton, or Ethylene Propylene o’rings are available.
|
|
This type of valve is actuated by pressure acting on a piston or diaphragm. The fluid is usually neutral e.g. air, water, hydraulic oil. The pressure range varies and is specified accordingly in a data table.
"Normally Closed" (N/C) valves of this type remain closed under spring pressure, when de-activated.
"Normally Open" (N/O) valves of this type remain open under spring pressure, when de-activated.
When pressure is connected to port "Z" the valves open or close according to type.
A separate 3/2 pilot valve is used to supply pressure to port "Z", it is mounted either directly on the actuator or remotely.
In some cases a 4/2 or 5/2 pilot valve will be required. The main valve position can be N/C or N/O. The basic position is determined by connecting the pilot valve output lines accordingly. (The direction of flow is usually indicated by an arrow or shown schematically on the body).
|
|
ASCO/JOUCOMATIC has developed a wide range of valves for all fluids, whether neutral or aggressive, made out of brass, bronze, cast iron or 316L stainless steel.
Reliability is ensured by:
* A monobloc rod, with stainless steel from the reed to the piston
* Guidance by 2 extra-large PTFE bearings.
Pilot solutions: solenoid valves on valves or mounted on subbases and valve islands.
|
|
PNEUMATIC VALVE 2/2 NC ANGLE HEAD
TECHNICAL SPECIFICATIONS
Media: air - water - steam - light oil
Pressure range : 0 to 25 bar max
Media temperature : -30° to +180° C max
Ambient temperature : -10° to +70° C max
Media viscosity : 600 centistokes max
Pilot media : filtered air or water
Pilot pressure : 4 to 10 bar max
|
|
Compact Poppet Valves
GENERAL:
Inline & Stackable Manifold.
Operation: Internal or external piloted, solenoid pilot or pressure
controlled, high flow poppet valve.
Note: External pilot pressure must be equal to or greater than inlet
pressure to insure proper function.
Mounting: Through holes for mounting.
Materials: Anodized aluminum alloy body, and aluminum alloy top plate. Aluminum alloy poppet with bonded Buna-N sealing surface. Elastomers: Nitrile rubber O-rings.
FEATURES:
- Cost effective
- High flow
- Compact design
- Port Pressure Independent
- Robust construction
- Continuous duty rated
- Ease of maintenance and repair
- Non-Lube service
- Leak tight construction (Series CX)
APPLICATIONS:
- Pulp & Paper - Pulp slurries
- Industrial Mineral
- Steel Mills - Pickling slurries
- Vacuum
- Packaging - Food and chemical
- Leak Test
- Power Generation - Cooling water
|
|
Haskel's BuTech product line offers an extensive line of check valves, needle valves, 2-, 3-, 4- and 5-way ball valves with 3/16" to 1" ports (4.7mm to 25.4mm), as well as fittings, tubing and related equipment for petroleum production.
Our sub-sea valves are custom designed for instrumentation, process control and chemical injection applications in the harshest environments. Designed for Remote Operated Vehicle (ROV) operation, these valves provide rugged protection, safety and reliability in template control panels, sub-sea wellheads and christmas trees.
Manufactured to meet the requirements of NACE MR-01-75, API spec. 6A and 17D, and numerous other specifications, BuTech sub-sea valves ensure trouble-free operation in hydrogen sulfides, corrosion inhibitors, paraffin thinners, hydraulic fluids and many other chemicals.
|
|
A Y-Globe valve is an in line valve that is typically used to isolate or control medium flow.
Y Globe valves offer the perfect balance between flow and sealing requirements. The flow control characteristics are much better than a globe valve, while the zero leakage sealing performance far excel that of a ball valve.
It can be provided as a standard Y Globe valve or as a special control valve for severe service applications. They are widely used in Plastic and Polymer Industry as well as control variants in the Petrochemical, Chemicals, mineral processing and Refining industries.
The SchuF Y Globe valve is unique in respect of its flexibility, high Cv and reliable performance.
|
|
|
The new ODE 21IA series is characterized by the angle seat body in stainless steel AISI 316, as all the components in contact with fluids. The angle seat specific body design allows to maintain the fluid flow extremely stable in order to guarantee a high flow values. The auto positioning floating shutter system and the Teflon ring guarantee good seal and reduced leakage over time. Moreover the particular configuration makes the valves resistant as well against fluids with abrasive and chemical contaminants. The standard configuration with flow in direction under shutter allows the execution anti water hammer. It’s available on demand even the version with flow above the shutter for application with gasses and steam.
|
|
|
|
|
|
OPERATING MEDIA
- Air, water, alcohol, oil, petroleum products, saline solutions, steam, etc. (as long as compatible with AISI 316 or Bronze RG5).
- Pressure from 0 to 16 / 25 bar (steam from 180°C, from 0 to 10 bar) depending on the size and model chosen (see following pages).
- Temperature from –10°C to 180°C.
- Max. viscosity 600 cst (mm2 /s).
CONTROL MEDIA
- Driving media: compressed air, lubricated or dry, gas or neutral media.
- Ambient temperature: -10°C to +60°C for the standard version in PA66; for the optional version in PPS, from +5°C to +130°C.
GENERAL FEATURES
- Threaded valve ends, as per ISO 228/1 and ISO 7/1 – other tyWeight available on request.
- Assembling is possible in all positions: upright, flat or angled.
- Range available from 3/8” to 2” in the Double Acting versions, Spring Return N.C. from above and below the plug, Spring Return N.O. from below the plug.
The variations in the actioning of the valve, the several combinations and the possibility to intercept the fluid from above or below the plug, originate multiple versions of the automatic valve.
In the table below are indicated the standard versions with the main parameters.
On the basis of the kind of valve and the variations of pressure ∆P that must be intercepted, the necessary control pressure can be individuated, and consequently, the code for the corresponding valve.
|
|
Supply Valve
. For two-pipe steam and heating water systems
. Modulating with dial and pointer
. Brass construction
. Non-rising handle with spring packed construction
. Angle and straightaway patterns available
. Available in sizes 1.2" - 2" NPT
. Opens and closes in less than one turn
. Arrow on handle indicates "ON" and "OFF" direction
. Dial divisions make adjusting valve easy
. Operating pressure:
. 25" (635mm) Hg vacuum to 150 psig (10.3 bar)
for steam service
. 150 psig (10.3 bar) for water service
. Maximum pressure 150 psig (10.3 bar)
|
|
|
Easytop-Slanted seat valve (free-flow valve), with Viega-Press connections, with SC-Contur, valve box and top made of gunmetal in accordance with DIN 50930-6, valve seat made of stainless steel, with spindle transmission and position indication open/closed,handwheel with interchangeable medium mark green/red, with drain plug, working pressure: 16 bar (PN 16), working temperature: 90 °C, with DIN-DVGW-test mark,
|
|
|
Masoneilan's 31000 Series control valve is a PFA lined assembly designed for corrosive applications. It features an eccentric rotary plug design that provides tight shut off and low dynamic forces.
|
|
Manual Globe Valves
Size range : DN6 - DN300 1/4" - 12"
Pressure rating : CL150, CL300, PN45, PN50
End connections :Screwed, flanged, Socket weld / butt weld, stubs
Configurations :Bolted bonnet, union bonnet, cone seat. Extended and non- extented stem
Materials :Bronze, gunmetal, austenitic stainless steel
Bestobell has a wide range of high performance globe valves available in Bronze or Stainless Steel in a variety of end connections. Bestobell’s unique headworks design which incorporates a bolted bonnet and integral cone seat to give smoother operation and reduced operating torques which all aid an extended leak free life. Extended spindle valves are available for liquid service, along with standard spindle lengths for use on ambient gas requirements. All materials used are selected for their suitability to function at cryogenic temperatures. All valves are cleaned and degreased for oxygen duty.
|
|
Type:
Gate valve
Globe valve
Check valve
Ball valve
Nominal Sizes range: DN50 (2”) to DN500 (20”)
Pressure rating range: Class 150 to Class 2500
End connections: flanges, socket welding,…
Design: according standard
|
|
|
|
