|
|
|
|
|
|
VERTICA FORM FILL SEAL MODEL PMV-300
For packing a wide range of liquids and semi liquids in pillow bags and Tetrahedron pack.
Easy and simple to operate.
Material can be pack polyethylene and other laminate.
The vertical form fill seal machine, forms the bag, fills it with the product and seals it in a full automatic cycle.
The transport of the wrapping material is affected by a pair of special rubber belt, and operates by mechanically driven system.
The vertical sealing jaws are pneumatically operated.
The horizontal sealing jaws are pneumatically operated.
Foil transported threw dancing roller system to insure low tension.
The feeder of the foil from the jumbo roll is done by motor gear.
The control of the machine is done threw our external control panel key board.
Features
- The bag length is electronically adjustable as required on the machine itself while it running. And it can be varied with in 1 mm.
- Photo cell to center the print.
- End of reel detector.
- Electronic variable speed.
|
|
The Master pneumatic is an fit for the realisation of plastic bags fromplain or single-fold foil reels. It was constructed to satisfy all operating convenience, versatility, solidity and reliability requirements, especially in case of small and medium production capacities. The following operations are fully automatic: the vertical sealing of the tubular as well as the horizontal closing of the bag bottom; the bag sliding as well as the length control; the bag top cutting and horizontal sealing. The sequential execution of the operations is controlled by a PLC, the functions of it can be modified directly by the keyboard. The PLC programming
foresees an input for the control of a weighing system. The operation speed of the is of 10 bags/min. (according with product). The machine may work with polyethylene from 30 to 80 microns thickness as well as with coextrusion foils from 35 to 40 microns.
|
|
robag®3 ttx, the ultimate in economic value, with two Vertical Form Fill and Seal
(VFFS) packaging systems in one machine
- dramatically reduces floorspace costs – eliminates the 1.8 to 2 meters of space required between two separate VFFS packaging systems
- reduces running costs (air, electricity etc) when compared to running two separate VFFS units
- high speeds with total integration
- efficiency – greater than 95%
- rapid former changes using ‘auto connect’ upload assistant features
- minimise wastage – rates as low as 0.5%
- all of the above deliver lowest ‘cost of ownership’ and highest ‘return on investment’
|
|
GA 420 / 520 / 620 C - Automatic packaging Machines
VFFS automatic packaging machines for Food and Chemicals
General description :
Vertical form-fill-seal machines to create bags with three hermetic seals starting from a reel of thermoseleable film of max reel width 450 mm, 550 mm, 650 mm.
Constant heated crimped seal, suitable for coated materials: polypropylene, aluminium/polyethylene, paper/polyethylene.
Suitable to pack liquid, grains or powder products, for food and non food market.
The machine is equipped with safety devices and all requirements according to the law requirement agains accidents
|
|
|
|
|
|
Kliklok-Woodman's new EVOLUTION continuous motion bagmaker is the world's fastest vertical bagmaker, capable of true production speeds to 225+ bpm. Patented, independently phased, twin sealing jaws separate the Evolution from all other high speed machines, and virtually eliminates lost cycle time. The unique center mounted filling tube and natural counterbalanced sealing profile are designed to provide vibration free, extremely smooth operation at all speeds.and allows us to directly mount many of our Sigma Plus® weighers to the Evolution for an extremely compact footprint. Our color graphic Insight® operator interface coupled with "off-the-shelf" PLC controls insures industry leading ease-of use and the highest reliability. Evolution is also extremely versatile, handling package sizes up to 300mm (12") wide and multiple package styles.
Standard Features
- Twin Independent Servo Controlled Seal Jaws
- Insight® Color Touch Screen Operator Interface
- "Off-the-Shelf" PLC - Based Control System
- Instant Product/Program Changeover
- Quick-Change Former Assembly (No Tools)
- Unique Center Balanced Construction
- Fiber Optic Registration Control
- Programmable knife cut-off
- Film Run-out Alarm
- Pneumatic Film Supply Spindle
- Hinged Electrical Cabinet for full machine access
- Rotary Back Seal Band
- Servo Controlled Film Vacuum Pull Belt
- Motorized Film Positioning
|
|
Ice-cold packaging with the VPL 400 The solution for the frozen food industry :
With the VPL 400, consequently following the demands of the frozen food industry, ROVEMA begins a new era in the form-fill-seal machine area.
Arguments that convince:
Maintenance and wear resistant with precise modern linear motor drive system
Very high performance, versatile and flexible – responds quickly
Especially quiet, since it moves on magnetic field of air
High seam quality by individual sealing time and pressure settings
Even difficult films can be processed at a high output rate
Products can be changed quickly and effectively
Stainless steel as standard design
High cycle number up to 150 min – even with long bag lengths
|
|
The machine has been developed to offer the maximum accessibility to all mechanisms, designed operator friendly minimizing the requirements of maintenance, and easy to adjust.
All mechanic parts and elements subject to frictions are designed with systems of permanent greasing.
The mechanical concept includes the variable cycle enabling the machine to optimize its operation in any working condition, offering always the best performance.
|
|
Vertical wrapping machine is a vertical form fill and seal unit. It is basically designed to handle an almost endless variety of flowable products, liquids, powders and bulk solids which
FW77
- Conversation style touch panel mounted compacted vertical wrapper.
- Smooth, accurate, high speed operation servo motor film drive.
Up to 100packs/min
FW7700
- Simple communication through conversation style touch panel with color display, standard vertical wrapper.
- Smooth, accurate, high speed operation with servo motor for film feed & end sealer drive.
Up to 100packs/min
|
|
|
HBV-4 is a multi-line vertical form fill and seal machine which is used for packing of dense, fine, loose and particulate materials as well as liquids and semiliquids into STICKPACK bags. Drive of the machine is electromechanic - pneumatic. This machine is equiped with SIEMENS control systém.
|
|
Machine HNXB with doser for sugar
The vertical hose packaging machine HNXA is appointed for packing into the single-portion bags and bags with cross weld (turn for 90 steps). The bag is made in the machine from the roll of printed thermal weldable wrapping material. The foil is cut up in accordance with number of tubs, after the bag forming which is made on the tubes, the goods is filled into the bag.
In accordance with goods requirement the following dosers can be used:
friction volumetric doser: sliced sugar, loose goods
automatic dosing weigher: small packet of sweets, tablets, pieces goods
worm doser: milled goods
liquid and paste doser: mustard, ketchup, mayonnaise, honey, jam
Machine output: 30 - 40 cycles/min. (multiply by tube number
Bag dimension: length 30 - 180 mm, length of cross bag 30 - 90 min
|
|
MAIN STANDARD FEATURES :
- Left hand version.
- AISI 304 & 316 machine frames.
- AISI 316 product contact parts.
- Reel lifting device.
- Automatic film tracking.
- Photocell for print registration.
- Easy opening notch.
- Gas flushing.
- Embossed coding.
- Printing on film - laser/ink jet/thermal printing etc.
- Batch counting.
- Counting & stacking units.
- Automatic cartoning and case filling.
|
|
This is a family of the Form & Fill type for vacuum conditioning.
These machines are meant for coffee beans, ground coffee, flour, rice, pet food, detergents, products in chunks and powders.
Among the main features:
- Vacuum packaging with total or partial inert gas compensation.
- Wide range of trimmings: gusseted bags with squared bottom; straight or folded upper edge; half-moon upper edge for easy opening; single or double folding of upper edge; adhesive belt application for closing the bag; tin-tie application.
- Wide selection of thermo-sealable materials, transparent coupled with paper, metallized and easy open types.
- Complete integration between the packaging line and the degassing valve applying system.
G 500
Automatic packaging line for granules, powders and chunks.
Package volumes: from 100 to 3.300 cc
Package sizes: min. 60 x 40 x 180 mm – 130 x 85 x 440 mm
Production speed: 50 ppm
|
|
|
|
|
|
This is a family of automatic lines of the Form & Fill type: they carry out packaging with gas compensation in protected atmosphere and output any type of bag.
They are meant for coffee beans, ground coffee, flour, rice, pet food, detergents, products in chunks and powders.
Among the main features:
- Packaging in protected atmosphere with inert gas compensation, granting a longer shelf-life to the product and a better presentation thanks to partial vacuum.
- Wide range of trimmings: gusseted bags with squared bottom; straight or folded upper edge; half-moon upper edge for easy opening; single or double folding of upper edge; adhesive belt application for closing the bag; tin-tie application.
- Wide selection of thermo-sealable materials, transparent coupled with paper, metallized and easy open types.
- Complete integration between the packaging line and the degassing valve applying system.
G 14
Automatic packaging line for granules, powders and chunks.
Package volumes: from 100 to 4.000 cc
Package sizes: min. 60 x 40 x 180 mm – max. 155 x 85 x 420 mm.
Production speed: 40 ppm
|
|
HBV 3U
HBV-3U is a vertical form fill and seal machine which is used for packing of dense, fine, loose and particulate materials as well as liquids and semiliquids into bags. Drive of the machine is done by servomotor, the secondary functions are controlled by pneumatic. Stainless steel construction and SIEMENS control system are also attributes of this machine.
Machine speed : 120 cycles/min
Bag width : 70 - 250 mm
Bag length : 40 - 400 mm
Machine weight : 900 kg
Power requirement : 7,9 kVA
Air pressure : 6 bar
Air consumption : 0,2 Nl / cycle (6 bar)
|
|
ILAPAK's Vegatronic series of industrial vertical packaging machinery produces the highest quality, most innovative range of pack styles, whilst delivering flexibility and exceptional performance. All models are PC or PLC controlled and are extremely versatile in handling many different applications, including innovative reclosable systems.
To accelerate packaging throughput, we have designed a series of high-performance continuous film motion machines, whilst most of the Vegatronic models are intermittent film motion machines. Select the machine to meet your specific application's needs.
The Vegatronic family is ideal for loose products, fresh or frozen produce, powders, liquids and granulated products. Please explore the different models and then contact us to review the options and custom solutions best suited to your application.
|
|
|
One of the world's most widely used packaging machines has been completely updated with the fourth generation Polaris II. All of the features that have made Polaris famous for reliability and versatile performance have been applied with the lessons of high-speed packaging applications to greatly improve efficiency and simplify operator set-up. All motion axes are now servo motor controlled for unparallel reliability and performance.
|
|
|
|
|
|
ETNA HI TECH
Vertical packaging machine (VFFS) which makes a three sealing pack. Medium-high production speed performance.
The model ETNA Hi Tech is a machine designed for the packing of a wide variety of products such as liquids, pastes, powders, granulated foods, frozen foods (IQF), snacks, vegetables and many other particulate products.
This Equipment has been designed with the Highest Quality Materials, Emphasizing Ergonomics, Ease of Maintenance, Operation Simplicity, as well as Ease of Sanitation.
The use of Maintenance Free, Advanced Electronic Controls and Superior Quality Dynamic Brushless Drives, Combined with A Touch Screen Centrally Controlling the Machine Operation, gives the Equipment Extreme Programming Flexibility, in order to handle the most demanding products and films.
STANDARD FEATURES
- Servo-driven film transport and cross seal jaws.
- Painted in RAL 9006 and RAL9007 standard colors or Stainless Steel Option.
- Closed Structure Frame Construction.
- Film Roll Holders with Pneumatic chocks.
- One-piece film former.
- Black and white 5" touch screen control panel.
- Capacity to Program Data for 100 Items.
- Touch Screen Adjustment of Sealing Time, Temperature and Pressure for the Horizontal seal Jaws.
- Key Controlled Access to 3 levels of Touch Screen Programming.
- Motorized Film Unwind with Film Tension Adjustment.
- Automatic Detection for the end of Film Roll.
|
|
Vertical wrapping machine is a vertical form fill and seal unit. It is basically designed to handle an almost endless variety of flowable products, liquids, powders and bulk solids which
FW77
- Conversation style touch panel mounted compacted vertical wrapper.
- Smooth, accurate, high speed operation servo motor film drive.
Up to 100packs/min
FW7700
- Simple communication through conversation style touch panel with color display, standard vertical wrapper.
- Smooth, accurate, high speed operation with servo motor for film feed & end sealer drive.
Up to 100packs/min
|
|
This is a family of modular and compact machines, able to provide the highest performance.
They are meant for coffee beans, ground coffee, flour, rice, pet food, detergents, products in chunks and powders.
Among the main features:
- Removal of residual air into the upper part of the package to grant a better stacking of the bags.
- Handling of a wide range of thermo-sealable materials: transparent, coupled with paper, metallized and easy open types.
- Sealability of the four vertical edges of the pack to provide a better stability.
- Possibility to punch a carrying handle in the upper part of the bag.
- Wide range of bag formats
G 21
Automatic line for atmosphere packaging with inert gas compensation.
Package volumes: from 100 to 4.000 cc
Package sizes: min. 60 x 40 x 180 mm – max. 170 x 85 x 460 mm (G21 Big Size)
Production speed: up to 25 ppm
- Complete integration between the packaging line and the degassing valve applying system.
|
|
CSV40 N
CSV40N vertical f/f/s packaging machine for making pillow shape, gusseted and flat bottom bags. The line may be equipped with two different outfeed systems: a central one for pillow shape bags and a side one for flat bottom bags. Operational speed: up to 60 ppm.
All ICA packaging lines may be equipped with: integrated check-weigher, Siemens PLC control system with touch screen display or PC, supervision system, electrical axes management with servo-driven motors, on-line diagnostics via modem connection, coding and dating devices, labelling units and clip-closing devices, bundlers, palletizers and auger fillers, cup-type volumetric fillers or weighing systems with single or associative heads. The coffee packaging lines may be prepared for fitting Aroma System degassing valves and for packaging in modified atmosphere with gas flushing.
|
|
|
The vertical hose packaging machine HV2 with worm doser DS1 is appointed for packing of milled and powdered goods. The bag is made in the machine from the roll of printed thermal weldable wrapping material. Machine drive is mechanical-pneumatic and it is controlled by electronic control system.
|
|
|
|
|
|
Scope of use
Packing loose and powdered materials like: tea, beans and ground coffee, grits, rice, candies, raisins and nuts, chemical granulated products, flour, sugar, buttons, nuts etc. into sealable materials. Additionally they are used for packing liquid and semi-liquid products, such as: milk, ketchup, mayonnaise, mineral water, etc.
There are two versions of the device; packages can be sealed by permanently heating jaws with adjustable temperature (laminates) or resistance tape by impulses with adjustable power flow time (PE).
Packaging material
Polyethylene foil, polypropylene, multi-layer laminates, polyethylene covered paper and other thermo-sealable materials.
Operation principle
Foil is unfolded off the bobbin drum and moves through feeding rolls towards the forming pipe (so-called tube). Here the foil is welded into a sleeve and the date is printed. Then the foil is moved by rubber driving belts to any fixed distance or by a stroke reflecting the graphic sign printed on the foil. Fixed amount of the product is then batched to the formed sleeve in a fixed time. Filled pouch is closed with a lateral weld, cut off and it slides down along a special skid or moves towards a stacking channel.
|
|
Sometimes it's the simple ideas that really click with our customers - such as marrying the Kliklok Compak II, one of the most well-known bagmakers in the snack food industry, and a compact Yamato 510 Alpha weigher with a custom weigher support structure. This union begets a very reliable packaging system with a minimal footprint, short setup time, renowned ease-of-use and extremely low maintenance needs - at a price that will fit any budget.
The Uni2 (pronounced unidos, meaning united, all-in-one, integrated) Packaging System was originally put together specifically for low- to mid-volume snack manufacturers in the Mexico, Central and Latin America markets. The Uni2 produces pillow-pouch bags at speeds up to 80 bpm and can handle bag widths up to 250 mm. KW's exclusive Insight® icon-based, multilingual, colour touch screen operator interface includes automatic program setup and instant program changeover. A code dater and a quick-change former assembly round out the feature set.
|
|
JBC2
Packaging machine JBC 2 is used for packing of tea into the flat bags with thread and label. Ready tea bags are automaticly inserded into a box. Machine drive is electomechanic. For tea preparation the cutting machine RC1 or RC 2 can be used.
Machine speed : 120 cykles/min
Bag width : 50 mm
Bag length : 60 mm
Machine weight : 450 kg
Power requirement : 1,9 kVA
|
|
Machine HV1 with one-lane linear wiegher DV1
The vertical hose packaging machine HNXB is appointed for packing the stick and cross pack. The bag is made in the machine from the roll of printed heat sealable packing material. The foil is cut up in accordance with number of tubes, after the bag forming on the tubes, and product is filled into the bags.
Machine output: max.18 cycles/min.
Bag dimension: max. width 203 mm/max. length 300 mm
Machine accessories:
- in feed conveyor PV1 with the hopper
- out feed conveyor PO1
- printing device
- device for gas flushing
- euro-hole
- dosers integration
|
|
Many functions on a small space for a precise folding of the bag top
For block bottom bags with various folded top styles
Complex production on lowest space requirement
Up to 6 litres filling volume
Intermittent operation
Optimal price/performance ratio for the production of block bottom bags
WOLF improves with the patented new development of the form, fill and seal machine VPA 250 with top-folding machine KFM, the series of multi functional top-closing machines for the production of compact and stackable block bottom bags.
This packaging line is especially suitable for rice, beans, peas, lentils, noodles, pet food etc., but also for dusty products as detergent.
|
|
|
State-of-the-art-technology and 40 years of application experience combine to form the ultimate wrappers. The Pack Series of horizontal flow wrappers is the next generation of wrappers from Bosch's Packaging Machine division. From the economical and flexible Pack 201 to the high speed, highly automated Pack 401, Bosch's Pack series can likely meet your flow wrapping needs. Pack wrappers feature the latest control and film sealing technology, producing superior package quality. A powerful, intuitive user interface and quick change parts combine to allow fast and easy changeovers. All pack series wrappers are available globally and supported locally. Partner with a truly global machine supplier, Bosch Packaging Technology.
|
|
Hugo Beck supplies horizontal form fill and seal machines for different types of packaging for all levels of output ranges of film packaging up to 15,000 cycles/hour in two seal widths.
Intermittent horizontal form fill and seal machines and insertion machines in the lower output range are part of the programme, as are continuously working film packaging machines for the higher output range.
|
|
|
|
|
|
SO NEW-S ELECTRONIC is an innovative machine suitable for packing products such as long cut pasta, bread sticks, chocolate bars, etc. in pillow type bags and also in flow-packed trays if supplied with some special devices. SO NEWS ELECTRONIC is the result of many years of field experience and machine development.
These improvements have further increased the well known reliability of STIAVELLI long cut pasta packaging systems.
The packaging system shown in this brochure is the long cut pasta version of the SO NEW-S ELECTRONIC machine equipped with SPL/E NEW-S double weigher.
ADVANTAGES
¥ High speed reliable packaging system, with excellent weighing accuracy.
¥ Electronic management of all machine parameters thanks to the multitask operator interface.
¥ Minimum percentage of rejected packs due to product contaminated seals.
¥ High performance machine able to handle rough and difficult flowing products.
¥ High quality of components sharply reduces parts wear and consequently maintenance time.
¥ Phased electronic control with automatic resetting after any machine stop.
¥ Operator interface (weigher + packaging machine) with touchscreen colour display for memorization, control and selfdiagnostic of all operation parameters. Possibility of remote control through modem via Internet.
|
|
|
|
