|
|
General grade membrane cartridges are designed for general purpose use wherever a cost effective membrane filter is required and is offered in polyethersulfone, nylon, Teflon, and polypropylene. Designed to hold the maximum amount of filter media that can be completely and effectively utilized in a cartridge, General grade membrane filters lower the cost of filtration . Membrane cartridges are flushed with 17+ megohm-cm water to remove potential extraneous manufacturing debris. These cartridge modules are also individually tested. Priced below special purpose cartridges, General grade membrane cartridges are still manufactured with the same careful attention to both quality and performance.
|
|
Polyethersulfone, Polypropylene and Nylon
Membrane Filter Elements
Shelco's new MicroVantageTM pleated membrane cartridges are designed to meet the high standards of today's industry. These cartridges are manufactured to the most stringent production standards making them the new benchmark of the industry. Manufactured in an ISO 9002 environment,each general grade cartridge has its own lot code for traceability. Each operation including assembly, testing, cleaning, drying and packaging is done in an appropriately rated and certified clean room.
Other products available:
|
|
GE Water & Process Technologies brings more than 30 years' experience and engineering expertise to the development of spiral-wound membranes and filtration systems for pure-water, industrial, and food, beverage and pharmaceutical applications. GE provides the broadest product line in the industry with a complete range of membrane filtration processes:
Microfiltration (MF)
Ultrafiltration (UF)
Nanofiltration (NF)
Reverse Osmosis (RO) |
|
Polypropylene, and Glass Fiber Filter Elements
Shelco 's MicroVantageTM pleated cartridges are designed to meet the standards of a wide spectrum of industries. From our general grade pleated cartridges designed for high purity applications at an economical cost to our P grade Glass cartridges with a final nonsheding layer of media, these cartridges are manufactured to the most stringent production standards making them the new benchmark of the industry. Materials of construction are specifically chosen to match each application independently. The Shelco MicroVantageTM cartridge should be your choice when critical retention is essential to the process.
|
|
Vokes' Microfelt cartridges are designed for the fine filtration of fuel and lubricating oils, along with other fluids including hydraulic oils and glycol. Manufactured from a range of specially selected synthetic felt media, Vokes Microfelt cartridges have excellent depth filtration characteristics and a high dirt holding capacity. Cartridge integrity and filtration performance relies on design features which include welded media seams, filter media bonded to the end caps and the fitting of leak proof seals. Manufactured to high quality control standards, all filter media is batch tested for filtration performance and metal components deburred.
Vokes Microfelt cartridges are available in 10 standard sizes and can be used in multiple cartridge vessels with flow rates typically up to 300m³/h in lubricating oil systems. There are four basic specifications including cartridges capable of withstanding high collapse pressures, high temperatures and chemically aggressive contaminants. Vokes Microfelt cartridges are disposable, ensuring that all collected contaminants are removed from the system when the cartridges are renewed.
|
|
You need cartridge filters with long life, high efficiency and low total operating cost and that's what you get from GE Water and Process Technologies. With an extensive range of filters to meet all of your microfiltration needs:
RO pre-treatment
Pure water filtration
Food and Beverage
Electronics
Oil and gas
Chemical processing
Pharmaceuticals
Medical
General industry
GE provides, and continues to develop, high-performance products backed by years of experience. Our cartridge filters are made with no wetting agents, solvents, anti-static agents, or binders. FDA-compliant filters are available for food and beverage contact. |
|
The filter elements, including sintered metal powder filters, sintered metal fiber filters, titanium filters and other alloyed filters, are manufactured by isostatic pressing or co-axial pressing via powder metallurgy process. Available materials are: stainless steel 316L, 304L, 904, Titanium, Inconel, Hastelloy, Nickel, Monel and other alloys .etc.on request.
The pore size can be adjusted by suitable selection of the powder size fraction and the process parameters. It has the type of tube, disc and stack of lamination and so on.
Main Applications
1. Gas and liquid filtration
2.Solid catalyst recovery
3.Filtration of slurry oil and other petrochemical products
4.High-temperature gas filtration
5.Fluidization
6.Powder conveying
7.Aeration, and other applications in various industrial fields.
Main advantages
1. Good shape stability
2. High mechanical strengthen and good integrity
3. Controllable pore sizes and porosity
4. Good permeability
5. Good corrosion and thermal resistance
6. Easy to be made into complicated shapes, can be put together by soldering or gluing
7. The service life can be prolonged by cleaning and regenerating process |
|
| ... products without technical information |
| |
The filter elements are manufactured by isostatic pressing or co-axial pressing. The pore size can be adjusted by suitable selection of the powder size fraction and the process parameters. It includes the type of tube, disc and stack of lamination and so on.
Main advantages
1. Good shape stability
2. High strengthen and good integrity
3. Controllable pore sizes and porosity
4. Good permeability
5. Good corrosion and thermal resistance
6. Easy to be made into complicated shapes
7.Highly mechanical strength, can diffusing air homogeneously.
Applications
1. Gas and liquid filtration
2.Solid catalyst recovery
3.Filtration of slurry oil and other petrochemical products
4.High-temperature gas filtration
5.Fluidization
6.Powder conveying
7.Aeration, and other applications in various industrial fields. |
|
The filter elements, including sintered metal powder filters, sintered metal fiber filters, titanium filters and other alloyed filters, are manufactured by isostatic pressing or co-axial pressing via powder metallurgy process. Available materials are: stainless steel 316L, 304L, 904, Titanium, Inconel, Hastelloy, Nickel, Monel and other alloys .etc.on request.
The pore size can be adjusted by suitable selection of the powder size fraction and the process parameters. It has the type of tube, disc and stack of lamination and so on.
Main Applications
1. Gas and liquid filtration
2.Solid catalyst recovery
3.Filtration of slurry oil and other petrochemical products
4.High-temperature gas filtration
5.Fluidization
6.Powder conveying
7.Aeration, and other applications in various industrial fields.
Main advantages
1. Good shape stability
2. High mechanical strengthen and good integrity
3. Controllable pore sizes and porosity
4. Good permeability
5. Good corrosion and thermal resistance
6. Easy to be made into complicated shapes, can be put together by soldering or gluing
7. The service life can be prolonged by cleaning and regenerating process |
|
The filter elements, including sintered metal powder filters, sintered metal fiber filters, titanium filters and other alloyed filters, are manufactured by isostatic pressing or co-axial pressing via powder metallurgy process. Available materials are: stainless steel 316L, 304L, 904, Titanium, Inconel, Hastelloy, Nickel, Monel and other alloys .etc.on request.
The pore size can be adjusted by suitable selection of the powder size fraction and the process parameters. It has the type of tube, disc and stack of lamination and so on.
Main Applications
1. Gas and liquid filtration
2.Solid catalyst recovery
3.Filtration of slurry oil and other petrochemical products
4.High-temperature gas filtration
5.Fluidization
6.Powder conveying
7.Aeration, and other applications in various industrial fields.
Main advantages
1. Good shape stability
2. High mechanical strengthen and good integrity
3. Controllable pore sizes and porosity
4. Good permeability
5. Good corrosion and thermal resistance
6. Easy to be made into complicated shapes, can be put together by soldering or gluing
7. The service life can be prolonged by cleaning and regenerating process |
|
ALMATEC's high-pressure diaphragm pumps have been specially developed for charging filter presses with chemical wastes and special sludge.
With a driving pressure of max. 7 bar, the pumps of series AH build up a delivery pressure of 16 bar on account of the internal pressure boost. These genuine double-action pneumatic diaphragm pumps are available in three sizes with a maximum delivery volume of 4 m³/h (AH 15), 10 m³/h (AH 25) and 20 m³/h (AH 40).
All housing parts in contact with the product are made of PE UHMW. This polymer material is seven times more resistant to abrasion than PP. PE is also more resistant to wear than cast iron, aluminium and even steel.
|
|
| ... products without technical information |
| |
|
|
