In-line filters

Filtration size: 10, 3 µm
Operating pressure: 0 bar - 10 bar
Flow rate: 0 l/min - 360 l/min

The Maxiflow Series is a range of spin-on filters designed to provide low cost quality protection for hydraulic or lubrication systems. Maximum pressure 10 bar. Maximum flow 360 l/min. Product Overview Items marked with an asterisk ...

Filtration size: 50 µm
Flow rate: 32, 66 l/min

These in-line filters of the FVD Series devices are utilized in vacuum systems which require the handling of only minor to medium levels of dirt. These devices with a thermoplastic body and a cloth filter can be directly mounted for convenience ...

Filtration size: 7 µm
Operating pressure: 0.5 mbar - 3,000 mbar
Flow rate: 7.5, 20, 25 m³/h

The FCL in line suction filter with filtering cartridges are small in-line filters that suspends solids, impurities and dusts that might interfere in a negligible manner. Its compact and small size enables it to be directly installed ...

The CSF16 steam filter is a horizontal, in-line high efficiency filter used to remove contaminate particles from steam. The filter housing is available in 304 or 316L stainless steel. The housing is externally polished with an internal ...

IN-LINE FILTER WITH PLAIN ENDS - STAINLESS STEEL 304 - 316L STAINLESS STEEL 304 - 316L Inox 304 - 316L (Model : 62416)

The Meier in-line minifilter is suitable for applications with nozzles with a diameter of less than 0.4 mm, in coating applicators smaller than 75 mm or in any other application that requires removing residual impurities from the system ...

Flow rate: 500, 150, 350 l/min

The FVUM, FVUG, FVL series are in-line vacuum filters from Coval. They are specifically constructed to cater to different types of applications. This line of filters are integrated with a transparent tank, making the clogging visible. ...

Filtration size: 10 µm

The VF and VFEW are a series of vacuum filters manufactured by Sommer Technik. Comprised of a plastic housing and a paper filter element, they have the ability to deliver a pore density of 10 µm at a temperature ranging between -10 °C ...

Filtration size: 25 µm - 250 µm
Operating pressure: 0.3 bar
Flow rate: 78 l/min - 158 l/min

FOA is the series of filters for the high pressure line of hydraulic systems used with flanged connections on the tank wall below the fluid level. The oil leakage is avoided, during the replacement of the filtration element, by a stop ...

Filtration size: 3, 25, 6, 10 µm
Operating pressure: 0 Pa - 31,500,000 Pa
Flow rate: 0 m³/s - 0.002 m³/s

Pressure: Maximum Working: 315 bar (31.5 MPa) Burst: 950 bar (95 Mpa) Connection Ports: 1/2” BSP ÷ 3/4" BSP ÷ M22x1,5 (other thread option on demand) Materials: ...

Operating pressure: 200 psi

Filters provide reliable means of removing fine particles from liquids; filtering media must be removed and disposed periodically. Strainers, on the other hand, are coarse filters that remove larger particles; the straining mesh can be ...

Operating pressure: 0 bar - 1,550 bar

The specially designed dual-disc line filters of 1,550 bar series from MAXIMATOR filters gases and fluids at up to 1,550 bar maximum pressure limit. The cup type filters are designed to filter solids from gases and fluids at up to 1,550 ...

Operating pressure: 0 bar - 4,500 bar

The valves, fittings and tubings, is manufactured by Maximator, and offers a line of filters that can operate from maximum working pressures of up to 4,500 bar or 65,000 psi. The dual-disc type is ideal for gases and fluids, while ...

Filtration size: 5, 30, 56 µm
Operating pressure: 0 bar - 2,070 bar

MAXIMATOR pipe line filters provide excellent service in high-pressure applications to filter process fluids. An innovative cup design is available for use in applications requiring filtration of a high surface area with filter element ...

Filtration size: 25, 73, 5, 43 µm
Operating pressure: 0 psi - 125 psi

The F-950 Series Filter eliminates almost all granular pollutants in compressed air systems. The filter medium, a Dutch intertwine 316 stainless steel display is accessible in 5, 25, 43, or 73 microns. with a high supply pressure of 125 ...

Filtration size: 10 µm - 25 µm
Operating pressure: 0 psi - 30 psi

The X series from Anver is a vacuum filter that is made of porous polyethylene inside, and solid polyethylene outside. This quick-change replacement filter comes with 10 micron filter elements that can be converted to 10 micron if requested. ...

Filtration size: 0.07 µm
Operating pressure: 0 bar - 104 bar

Magnom magnetic submicron filters are manufactured to remove ferrous particles with the help of a magnet. Filters can remove ferrous particles smaller than 0.07um and eradicate the main cause of wear in the fluid system. The engines and ...

Operating pressure: 6,000, 3,000, 16,000, 24,000 psi

The Magnom CP bidirectional in-line magnetic filter is designed for liquid, gas and grease systems in a variety of industrial and hydraulic applications (smaller transmissions, hydraulic lines and 'on vehicle' automotive systems) and ...

Filtration size: 10 µm - 80 µm
Operating pressure: 350 bar

IN-LINE FILTERS BELL In-line Filters grant a high protection to the most delicate components of an oleodinamic system. Placed in the site under pressure, they keep the particles sucked or produced by the pump up to a size of 10 micron. These ...

Our inline filter is intended for pipeline installation. It is small, compact and low cost. It is easy to replace under practical conditions and can be subsequently retrofitted with no problems. They are also suitable for a variety of ...

Filtration size: 36 µm

Series of filters/silencers with filter in spherical sintered bronze and body in nickel plated brass.

Filtration size: 10 µm - 90 µm
Operating pressure: 0 bar - 30 bar
Flow rate: 30 l/min - 300 l/min

Complete range of hydraulic filters and accessories for any hydraulic equipment. Suction Low - medium - high pressure Return Tank accessories, Filtration unit, Absorbents

Filtration size: 5 µm - 25 µm
Operating pressure: 0 bar - 420 bar
Flow rate: 30 l/min - 450 l/min

Complete range of hydraulic filters and accessories for any hydraulic equipment. Suction Low - medium - high pressure Return Tank accessories, Filtration unit, Absorbents

Filtration size: 10 µm - 90 µm
Operating pressure: 0 bar - 10 bar
Flow rate: 30 l/min - 375 l/min

Complete range of hydraulic filters and accessories for any hydraulic equipment. Suction Low - medium - high pressure Return Tank accessories, Filtration unit, Absorbents

Filtration size: 0.01 µm
Operating pressure: 800,000 Pa
Flow rate: 70 l/min

The New Hi-mini Air Filter is an inline filter for the fitting of the hollow fiber in existing piping systems. It can remove particles in a clean gas supply and in drops of water with its 0.01μm filter pore size. This is utilized for ...

Filtration size: 0.01 µm
Operating pressure: 500,000 Pa
Flow rate: 80 l/min

The KBS series from Kitz is a set of in-line filters with a pore size of 0.01μm. It is equipped with a 1/4" tube pipe connection that delivleres a flow rate of 80 l/min. It can operate within a temperature range of 5 up to 50゜C and can ...

Filtration size: 0.01 µm
Operating pressure: 1,000,000 Pa
Flow rate: 300 l/min

The IRF series, which is manufactured by Kitz, is an in-line filter and has a follow fiber that is easy to install, and is suitable to use in applications that deal with mediums such as nitrogen, and compressed air like precision measuring ...

Operating pressure: 0 bar - 315 bar
Flow rate: 0 l/min - 30 l/min

In line high pressure filter designed for sandwich plate mounting, for hydraulic and lubricating systems, available in RH or LH options; max. nominal flow 30 l/min; max. operating pressure 315 bar; head and bowl in steel; bypass, reverse ...

Filtration size: 0.3 µm
Operating pressure: 0 psi - 50 psi

Helapet autoclave disc filters use high performance 0.3µm HEPA media for particulate removal of up to 99.97%, whilst allowing air to transfer in and out of an autoclave during the drying process. Each replaceable filter provides assured ...

Filtration size: 0 µm - 40 µm
Operating pressure: 0 psi - 50 psi

Helapet inline ink jet filters protect industrial printers against particles which could damage the printer's operation, whilst maintaining flowrates and providing an even distribution of ink. Supporting print quality and efficiency, ...

Filtration size: 0.2 µm
Operating pressure: 0 psi - 50 psi

Helapet CO2 incubator disc filters fit directly on to any standard desktop CO2 incubator to resist substances from entering the chamber. Each standard CO2 incubator disc filter is available using a high-performance PTFE membrane which ...

Filtration size: 60 µm

The continuous declogging filter is an effective solution to filter highly contaminated water at thresholds of up to 60μm and its compactness makes it easily adaptable to an existing system. Its continuous unclogging system requires very ...

Operating pressure: 0 bar - 40 bar
Flow rate: 1,200 l/min - 50,000 l/min

Compressors have dust and other particles, depending on where the compressor is operating, except the humid air from the atmosphere. Although a large proportion of dust and particles are retained by the filters in the compressor, very ...

GL-Ludemann self-cleaning filter can have various specifications.

Filtration size: 50 µm - 1,000 µm
Operating pressure: 10 bar
Flow rate: 10 m³/h - 200 m³/h

Heavy duty industrial inline screen filters for coarse applications. Standard units are supplied with inline connections for easy istallation. Industrial design Range of screen sizes Hinged closure Stainless Steel Construction ...

Filtration size: 100 µm - 1,000 µm
Operating pressure: 10 bar

Designed for product transfers from holding tanks to tankers and vice versa. Ideal for product transfers from tankers to tanks Industrial or hygienic design Camlock couplings for quick connections Clamp closure for easy ...