- Detection - Measurement >
- Flow, Pressure and Level Measurements >
- Flow meter for the petrochemical industry
Flow meters for the petrochemical industry
Volumetric flow rate: 0 m³/h - 1,000 m³/h
Process temperature: 0 °C - 60 °C
Process pressure: 0 Pa - 3,500,000 Pa
... consumption of machines, cost allocation, and pressure loss monitoring. It measures (bi-directional) mass flow, temperature, pressure, and total flow which is key data for point of use compressed air ...
Process temperature: -40 °C - 150 °C
Process pressure: 0 bar - 16 bar
Precision: 2 %
... with this 4-in-1 sensor: measure (bi-directional) flow, pressure, temperature, and total flow simultaneously. The patented VPFlowScope® DP is the ultimate measurement tool for saturated compressed air ...
Mass flow rate: 100 lb/h - 1,000,000 lb/h
Volumetric flow rate: 0.1 ft³/min - 156.3 ft³/min
Repeatibility: 0.1 %
... depending on your process. The CentriFlow® Type I Meter, just as all CentriFlow® brand meters, is a mass flow meter designed for measuring bulk solids continuously ...
Eastern Instruments
Mass flow rate: 100 lb/h - 500,000 lb/h
Volumetric flow rate: 1.7 ft³/min - 120 ft³/min
Repeatibility: 0.1 %
The CentriFlow BWS meter is a gravimetric solids flow meter that will accurately measure the flow of product that continuously passes through it. Due to its simple, ...
Eastern Instruments
Mass flow rate: 100 lb/h - 1,000,000 lb/h
Volumetric flow rate: 0.6 ft³/min - 120 ft³/min
Repeatibility: 0.1 %
The CentriFlow Type II Meter is a gravimetric bulk solids mass flow meter that accurately measures the flow rate and total of the continuous stream of ...
Eastern Instruments
Volumetric flow rate: 10 l/h - 60,000 l/h
Process temperature: -40 °C - 150 °C
Process pressure: 16, 10 bar
Flow measuring and volume totalization of condensated steam and fuel, tank filling. Widely used in oil industry, measurement of honey, chocolate, paint, resin, inks, etc. Materials Body: EN 1.4404 ...
TECFLUID
Volumetric flow rate: 10 l/h - 7,000,000 l/h
Process temperature: -20 °C - 120 °C
Process pressure: 16, 10 bar
Suitable for flow measurement of liquids with conductivity higher than 20 uS/cm. Connections DIN o ANSI flanges (FLOMID-2FX, FLOMID-4FX) Between flanges DIN or ANSI (FLOMID-0FX) Sanitary connection Others on request Materials Body: ...
TECFLUID
Volumetric flow rate: 4 l/h - 50,000 l/h
Process temperature: -20 °C - 80 °C
Process pressure: 8 bar - 15 bar
Industrial process control in water treatment, osmosis, cooling and heating circuits, gases control. Available also for chemical, petrochemical, paper, pharmaceutical ...
TECFLUID
Mass flow rate: 0.15 kg/min - 20 kg/min
Process temperature: -196 °C - 400 °C
Process pressure: 0 bar - 1,043 bar
... MATERIALS - 316Ti Alloy C22 Tantalum SuperDuplex more on request The RHM06 is a low risk, low maintenance solution for critical flow applications everywhere. High pressure and temperature options comined with a selection ...
Volumetric flow rate: 110 l/h - 4,500,000 l/h
Process temperature: -40 °C - 120 °C
Process pressure: 0 bar - 250 bar
Process temperature: -20 °C - 120 °C
Process pressure: 25, 16, 40, 10 bar
Precision: 0.5, 1 %
... convenient maintenance. It is used to measure the volume flow of low viscosity liquid in closed pipe. Application Cooling water flow measurement Tap water flow measurement Edible ...
Process temperature: -40 °C - 150 °C
Precision: 1, 3, 0.5 %
Repeatibility: 0.15 %
... Systec Controls is the brand new universal clamp-on ultrasonic flowmeter for liquids in filled pipes. deltawaveC uses the highly accurate transit time method (time-of-flight) to measure the flow of liquids ...
Process temperature: 120 °C
Process pressure: 500 bar
... Model SEM-1 Electromagnetic Flow meter can perform test on the basis of two methods: flux collection method and non-collection method. There are no movable mechanical elements in the flow ...
Hubei Jianghan Petroleum Instrument & Meter Co., Ltd.
Volumetric flow rate: 0 l/min - 15 l/min
Process temperature: -20 °C - 65 °C
Process pressure: 0 bar - 20 bar
Process Atrato: Ultrasonic Flowmeter for Process & Control Environments The Atrato Process is based on our standard, wide ranging, Atrato meter but packaged ...
Titan Enterprises
Process pressure: 16 bar
Precision: 0.5 %
... of electromagnetic flowmeter display part flow meter and wireless communication module. The wireless communication module is equipped with IOT network card, that is SIM card. Its ...
Kamboda
Process pressure: 1, 1.6, 4, 16 MPa
Precision: 0.3, 0.5 %
KEF series electromagnetic flow meters are intended for fluid measurement in most industries including Electromagnetic flow meters are widely used in ...
Process temperature: -20 °C - 50 °C
... apart in the direction of flow. High efficiency air curtains are fitted to considerably extend the time between maintenance periods and window cleaning (typically 1 year). Features & Benefits Non-contact infra-red sensing. Continuous ...
Process temperature: -200 °C - 300 °C
Process pressure: 250 bar
Precision: 0.1, 0.2, 0.5 %
... Coriolis Mass Flowmeter (hereafter we call LZYN) is designed according to the Coriolis Principle. It can be widely used for the process detecting and custody transfer/fiscal unit in many industries ...
Shanghai Yinuo Instrument Co., Ltd
Process temperature: -40 °C - 130 °C
Precision: 1 %
... transfer time ultrasonic flow meter. No matter you want to quickly verify the flow reading of another meter or to data log flow system values over an ...
Process temperature: -40 °C - 160 °C
Precision: 1 %
Series DUS-TT-F wall-mount Clamp-on Transit Time Ultrasonic Flow Meters provide abundant capabilities for accurate liquid flow measurement from outside of a pipe. It utilizes state-of-the-art ...
Prisma Instruments
Volumetric flow rate: 0.6 l/min - 700 l/min
Process temperature: -40 °C - 120 °C
Process pressure: 150, 250, 300, 420, 160 bar
The FTB200 series flowmeter contains a magnetic detector and a magnetically permeable rotor (impeller). The flow of the medium drives the rotor (impeller) to turn. The rotational speed of the rotor (impeller) ...
Shanghai Nexon Electronic Co.
... Magnetic Flow Meters Are Used In The Various Industries Like: Chemical & petrochemical industries Oil & Gas industries ...
Flowtech Measuring Instruments Pvt. Ltd.
Process temperature: -50 °C - 550 °C
LGV V-cone flow meter is the second generation inner cone flow meter. It is a good performance differential pressure flow meter developed ...
Dandong Top Electronics Instrument (Group) Co.,Ltd
Volumetric flow rate: 60 l/min - 1,600 l/min
Process pressure: 1,800,000 Pa
... 80-100 Aluminum Oval Gear Meter, China OGM-A-50-80-100 Aluminum Oval Gear Meter, OGM-A-50-80-100 Aluminum Oval Gear Meter factory, OGM-A-50-80-100 Aluminum Oval Gear Meter ...
Volumetric flow rate: 1 l/h - 580 l/h
Process temperature: -20 °C - 120 °C
Process pressure: 38 bar - 400 bar
... FLOMEC® OM Series Oval Gear meters provide exceptional accuracy and repeatability in a wide range of applications measuring clean liquids. Direct volumetric measurement from the positive displacement design gives you ...
Process temperature: -50 °C - 150 °C
Process pressure: 0 bar - 40 bar
Typical Applications The FLEMCO flow meters measure the flow of most liquids and gases within the process industries, including chemical, petro-chemical, ...
EMCO Controls A/S
Process temperature: -25 °C - 200 °C
Process pressure: 1.6 MPa
Repeatibility: 0.2, 0.3, 0.4 %
... field of environmental monitoring; Air ventilation metering for special industries (nuclear industry, special chemical industry, glass manufacturing industry, ...
Process temperature: -20 °C - 80 °C
Process pressure: 1.6 MPa
Precision: 1.5 %
Insertion type electromagnetic flow meter is a type of electromagnetic flow meter has been used throughout industries for more than 50years. Insertion ...
Q&T Instruments
Process temperature: -30 °C - 160 °C
... install, strong anti-interference ability,stable and reliable, low starting flow, no pressure loss; • - Isolated RS485 interface, between the flowmeter and the secondary meter can be ...
Process temperature: -30 °C - 160 °C
... from each other. To carry out flow measurements with the ultrasonic flow meter, the flow velocity, the volume flow and the volume are displayed after ...
Process temperature: -30 °C - 160 °C
The ultrasonic flow meter has a measuring range of ±32 m/s. To perform flow measurement with the ultrasonic flow meter, the flow velocity, ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining